Agriculture University Tender

Cow Resting Cubicle:Resting cubicles from B-class MS 50 mm Pipe having hot dip galvanised to be supplied with Front Rail, Top rail with Suitable clamps and bolted into the concrete. The cubicle must be installed between two animals to accommodate at least 60 Cows.

Cow Rubber Mat:This is designed for softness, comfort and cleanliness, It maximizes the natural resting period and protect knees and hocks during rising/lying and also reduce the risk of teat tramps, lameness and injuries.

Calf Feeding Bottle:Satisfies a calf’s suckling reflex during feeding for new born calf.

Water Trough:SS water Troughs must be supplied. The tip tank provides a large, calm drinking surface from which the animal can drink quickly and without stress. The unit is very easy to clean and to maintain corrosion resistant and robust stainless steel trough construction. Heavy-duty hot dipped galvanized bracket system allows the unit to be either floor or wall mounted.

Water Bowl:Water Bowl should be made of SS designed with flow rate of 10 litres per minute having ½” BSP connection with volumetric capacity of 6 litres and weight of 2.6 kg. The bracket is designed to prevent dirt getting stacked on top of the bowl and polluting the water.

Automatic Swinging Cow Brush for Adult Cows:The swinging cow brush should be able to rotate at an animal-friendly speed swings freely in all directions, smoothly up, over and alongside the animal to provide comfort all around.The brush should have overload protection against overheating and provided with on/off energy saving feature which can enable the brush start/stop automatically. The brush should have 0.14 KW motor and provided with suitable arrangement for easy and flexible installation on walls or posts. The brush should have rotating speed of 26 RPM, 230 V with brush unit of 50 cm diameter with 17 cm long bristles. Technical Data: •Rotating speed 26 rpm 230V, 31 rpm 110V •Two swinging points, one at either end of the curved arm •One single and solid brush unit with 18 cm long bristle •Automatic on/off •Overload protection •Switch for additional safety •Dimensions: 100x50x132 cm •Diameter brush: 50 cm • Width: 60 cm • Weight: 70 kg • Power: 0.14 kW

Dairy Fan: Technical Data: •Propeller Diameter: 1200 - 1280 mm (6 blades) •Voltage / Frequency: 3 x 400 V / 50 Hz (or other according to country setup) •Amperage: 2.0 Amp •Power Consumption: 0.75- 1 kW •Motor Protection Class: IP 55 •Noise Level: 68 dB (A) 5m •Fan Speed: 400 - 450 rpm •Max Capacity at 0 Pa: 34000 m3/h •Specific Efficiency: 39.1 m3/h/W •Weight: 45 – 50 kg

Accessories & Start up Kit: Rubber Liner,Dip Cup,Test Plug for Liner,Non Kick Bar,S- Hook for milking Cluster,CMT Kit, Lactifence,Dipal,Rubber Transparent pipe,Milking Apron,Lubricants etc.

Utilities/Additional Items for supporting the equipment during installation/ After Sale Service:The supplier should supply safety protection devices such as Voltage Stabilizer of suitable capacity. Earthing pit for Milking system and all shed Equipment’s with Lighting resisters for the project site.The Supplier should provide all the electrification work of three phase and single phase including all the control panels and necessary cabling up to equipment with safety protections. The Supplier should supply all the plumbing lines along with Water Storage tanks for attaching the equipment in sheds and Parlour with suitable pressure with Hot water generator to heat water up to 80 degrees with suitable capacity required to run the milking parlor and bulk cooler. All civil, architectural and structural and foundation drawings required will be provided by tenderer and suitable product related information and schematic drawings needed to prepare should be provided by the supplier. All the Civil work will be done by tenderer. The supplying firm should have well established service, repair & maintenance network in Assam with service back up. The points of presence with contact details are required to be submitted along with the technical bids. The Standard equipment along with accessories should be guaranteed for period of 1year. A comprehensive after sales services should be provided by the supplier, during and after the guarantee/ warrantee period of the equipment. Water Tank ( 5000Ltr) with staging Clamps, Fittings Piping for Cubicles etc. DG 25 KVA PC for Software & Bus Cable Electrical Work with Panels and Wiring etc Railings, Partition, Gates etc. Tractor with 2 way directional valve for TMR Support and Platform needed for Brush, Manure separator Voltage Stabilizer Plumbing Work and Pipelines with Valves etc. Corrugated, Flexible Piping for Manure Separator Clamp for water bowl C Channel for manure scraper, Jet pump with accessories of 2 HP capacity

Jaquar(Cat No. ALD-563) or Equivalent