Archaeological Survey Of India Tender

Provision & installation for 15 W solar street light with in build lion battery up to 9 hrs back up time Lumen 130, CRI 70-82, CCT:3500-6500, 60 W solar panel with 5 m GI pole with 2 years warranty.

Earthwork in excavation by mechanical means (Hydraulic excavation) / manual means in foundation trenches or drains (not exceeding 1.50 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering – all work up to plinth level

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Brickwork with common burnt clay F P S (non modular) bricks of class designation 7.50 in foundation and plinth in cement mortar 1:4 (1 cement : 4 sand).

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand).

Providing & fixing stainless steel (grade 304) pipe made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and filling the same with necessary stainless steel nuts and bolts complete for signage board.

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type – III of ASTM-D-4956-01 as approved by Engg. In charge, letters, boarders etc. as per IRC-67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frames work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the Engg. In charge

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar location, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engg. In charge.

Provision for writing of granite signage board

Finishing walls with Acrylic smooth exterior paint of required shade

Provision for transportation of stainless steel PNB, DNB and granite stone CNB from Silchar to Dobongling (Lower Haflong road) including loading & unloading to the site spot