Airports Authority Of India Tender

1.1 - Vehicle Airport Entry Portal Drg. No. - Refer design drawing 1.3a-2S, 1.3a-2G Design, Supply, installation, testing and commissioning of OUTDOOR TYPE following sizes illuminated weather proof IP-65 protected openable glow sign board of minimum thickness of 110 mm for double sided and 70 mm for single sided as per enclosed drawings & specification. Signage shall made out of 1.44mm thick aluminium extruded profiles with concealed hinged profile system, extrusions with anodizing / epoxy powder coating of approved shade & colour and have necessary light proof ventilation arrangement. The text / signage matter shall be electrocut computerized automated self-adhesive vinyl graphics of 3M black out film behind, and yellow message created by using 3M yellow 3630-015 translucent film to be transferred on cast acrylic sheet of 5 mm thick on the readable side of the box to be pasted with 3M VHB (Very High Bond) double side adhesive tape in extruded Alu. section and easy for graphic changes, rubber gasketing concealed in to the profile sections, (single sided shall have 1.5mm thick Aluminium sheet for back). The box to have door stay to hold the shutter in an open position and easy access for maintenance complete. The illumination source shall be of LED's with suitable individual current regulator suitable for operation on 230V AC supply and LED shall be fixed inside the frame to obtain uniform illuminations along with connectors, concealed internal wiring in Al. extrusion section, earthing the body, complete as required, as per specifications & drawing enclosed. The box can be mounted on wall or from ceiling with MS tubes duly powder coated on the desired location approved by Engineer- In- charge & as per site conditions including extension the wiring in flexible PVC conduit with couplers / PVC casing capping from the nearest power point with 5A ISI mark plug top complete as required. Sign Structure: Providing a Square Sign post of 300 x 300 mm, 5.4mm thick MS hollow sections including welded Base plate in 8mm thick MS Plate and Gussets in 6mm thick MS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete footing. The post shall closed with a 6 mm thick MS plate and parts kept unpainted to weld the sign structure as per the drawing to ensure a rigid connection at site. The entire post assembly shall be hot dipped galvanized and P.U.Paint to match RAL 9006 as specified and approved by the Engineer-Incharge. The Post shall be always be a single continuous element without any joints. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim Plates for adjustment of levels and filling the gap with concrete slurry etc. required for fixing the sign in an external location. The item cost includes all accessories such as suitable heavy iron fixing structure to withstand high wind velocity condition for Silchar Airport, thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts,etc. complete as required. Foundation: Providing and laying foundation for the sign including its compaction and all activities like Excavation, PCC base layer, providing and fixing in position electrical connection wherever applicable and finished as per drawing. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. LOCATION: Departure Vehicle entry Gate Size - 6500 MM x 1200 MM Vertical clearance - 6000 MM, Road-width - 6.5M.

Vehicular Directional Sign – Portal Drg. No. - Refer design drawing 1.3a-2S, 1.3a-2G Design, Supply, installation, testing and commissioning of OUTDOOR TYPE following sizes Illuminated weather proof IP-65 protected openable glow sign board of minimum thickness of 110 mm for double sided and 70 mm for single sided as per enclosed drawings & specification. Signage shall made out of 1.44mm thick aluminium extruded profiles with concealed hinged profile system, extrusions with anodizing / epoxy powder coating of approved shade & colour and have necessary light proof ventilation arrangement. The text / signage matter shall be electrocut computerized automated self-adhesive vinyl graphics of 3M black out film behind, and yellow message created by using 3M yellow 3630-015 translucent film to be transferred on cast acrylic sheet of 5 mm thick on the readable side of the box to be pasted with 3M VHB (Very High Bond) double side adhesive tape in extruded Alu. section and easy for graphic changes, rubber gasketing concealed in to the profile sections, (single sided shall have 1.5mm thick Aluminium sheet for back). The box to have door stay to hold the shutter in an open position and easy access for maintenance complete. The illumination source shall be of LED's with suitable individual current regulator suitable for operation on 230V AC supply and LED shall be fixed inside the frame to obtain uniform illuminations along with connectors, concealed internal wiring in Al. extrusion section, earthing the body, complete as required, as per specifications & drawing enclosed. The box can be mounted on wall or from ceiling with MS tubes duly powder coated on the desired location approved by Engineer- In- charge & as per site conditions including extension the wiring in flexible PVC conduit with couplers / PVC casing capping from the nearest power point with 5A ISI mark plug top complete as required. Sign Structure: Providing a Square Sign post of 300 x 300 mm, 5.4mm thick MS hollow sections including welded Base plate in 8mm thick MS Plate and Gussets in 6mm thick MS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete footing. The post shall closed with a 6 mm thick MS plate and parts kept unpainted to weld the sign structure as per the drawing to ensure a rigid connection at site. The entire post assembly shall be hot dipped galvanized and P. U. Paint to match RAL 9006 as specified and approved by the Engineer-In-Charge. The Post shall be always be a single continuous element without any joints. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim Plates for adjustment of levels and filling the gap with concrete slurry etc. required for fixing the sign in an external location. Spanning truss shall be designed for each Mounting square section span and the wind loads. The item cost includes all accessories such as suitable heavy iron fixing structure to withstand high wind velocity condition for Silchar Airport, thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts,etc. complete as required. Foundation: Providing and laying foundation for the sign including its compaction and all activities like Excavation, PCC base layer, providing and fixing in position electrical connection wherever applicable and finished as per drawing. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. LOCATION: Operational Vehicle Entry Gate Size - 6000 MM x 1800 MM Vertical clearance - 6.0M, Road-width - 6.0M.

Directional Sign Pedestrian Drg. No. - Refer design drawing 1.3b Design,Supply, Installation, Testing and Commissioning of OUTDOOR TYPE illuminated, weather proof IP-65 protected openable, easily maintainable vinyl slim signage board of following size (s) made out of 1.44mm thick aluminum extruded profiles with concealed hinged profile system, extrusions with 20 microns anodizing / epoxy powder coating of approved shade & colour and have necessary light proof ventilation arrangement. The text(in three/two languages as mentioned in Technical Specification) / signage matter shall be electro cut computerized automated self-adhesive vinyl graphics of 3M/Avery make grey/black out film behind and white/yellow message created by using 3M /Avery make translucent film to be transferred on 5mm thick unbreakable Opal White polycarbonate sheet on the readable side of the box, non readable side shall have 1.5mm thick Aluminum sheet as per requirement of approved art works including supply of suitable size Stand of 75 mm Dia GI pipe with painting of 2 coat enamal paint of required colour along with internal illumination using LED modules to achieve uniform illumination (LED make: Osram/philips/Nichila/Cree) complete with all internal wiring ,connectors etc .as required as per specifications. The item cost includes all accessories such as suitable heavy iron fixing structure to withstand high wind velocity condition for Silchar Airport, thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts,etc. complete as required. (Interior signages) 1.3b Single side signage board of size 2500mm (L) x 1220mm (W) x 70mm [D] LOCATION: Sewage Treatment Plant, 150KWP Solar Power Plant, Community Hall - 02 Nos & AAI Colony Pump House