Urban Development And Housing Department Tender
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Urban Development And Housing Department Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Mar 2024
Closing Date14 Mar 2024
Tender Amount₹ 4,60,82,000
Costs
EMD
₹ 4,61,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Const. Of Futsal Ground With Astro Turf Installation And Hostel Building At Jollang, Itanagar
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_APUDH_1809_1Tender No
CEUD/PLG/TS-531/2023-24Tender Authority
Urban Development And Housing Department ViewPurchaser Address
-Website
http://http://udarunachal.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Consolidation of sub-grade with road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the sub grade.
1056
-
-
Granular sub base with coarse graded material (table :- 2) (costruction of granular base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) for grading - I material ( stone aggregate - 40mm nominal size) (125mm thick)
132
-
-
for grading - II material ( stone aggregate - 20mm nominal size)( 75mm thick)
79.2
-
-
for grading - III material ( stone aggregate - 10mm nominal size) (50mm thick)
52.8
-
-
providing laying, spreading and compacting screening B type/ coarse sand/stone dust of specified grade of uniform layer on a preparede surface with motor grader and compacting with roller etc. (25mm thick)
416.25
-
-
Brick work with bricks of class designation 75 in superstructure above plinth level to floor V level in all shapes and sizes in: a) Cement mortar 1:4 (1 cement : 4 coarse sand)
14.9
-
-
Supplying, assembling, lowering and fixing in horizontal position unplasticized PVC medium well screen (RMS) pipes 150 mm nominal with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-Charge - Laid in trenches in slope 1: 180, over Geo-Textile Layer
216
-
-
Supplying, assembling, lowering and fixing in horizontal position unplasticized PVC medium well screen (RMS) pipes 200 mm nominal with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-Charge - Laid in trenches in slope 1: 180, over Geo-Textile Layer
100
-
-
Geosynthetic Drainage Composite having thermobonding a draining core - HDPE geonet comprises of two sets of parallel overlayed ribs integrally connected to have a rhomboidal shape with a polyethylene film and a nonwoven geotextile having mass per unit area 130 g/m2 and tensile strength of 8.0 kN/m having in plane flow capacity of 0.7 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 13.5 kN/m , with mass per unit area of 830 gsm,
1056
-
-
SYNTHETIC PART- II Supplyling an laying (imported from EU)of UV resistant synthetic artificial turf conforming to FIFA standard 2 star rating including the followings, complete as per the enclosed specificaitons and as below: (a) Complete artificial turf of the diamentions and specifcations enclosed,of 50 mm pile height, in NIT as per FIFA 2 star rating on the existing base prepared for the purpose: Turf panels sewn together with infill of washed silica sand and rubber granules of recommended quantities: Line marking as per FIFA guidelines for football play field including D-area: Brushing of fibres with all poly hydraulic controlled equipement: 1 (one) set of goal post for football as per FIFS Standards : Certification from FIFA.
1056
-
-
STORM WATER DRAIN
-
-
-
E A R T H W O R K : Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Hard Soil
138.6
-
-
C O N C R E T E W O R K Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : Foundations and plinth
1.08
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
16.2
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
115.2
-
-
Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete.
399.24
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
141.96
-
-
Reinforcement of RCC work including bending, binding and placing in position
complete. Tar/TMT steel
2900.7
-
-
F L O O R I N G Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.
54
-
-
F I N I S H I N G 15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
336
-
-
Neat cement punning.
336
-
-
Carriage Charge
1
-
-
GI Chain Link fabric Fancing 2.1 Mtr High,136 mtr Length
-
-
-
Excavation Work : Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m.
12.1
-
-
Concrete Work : Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
2.02
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
10.08
-
-
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. TMT bars
1116.8
-
-
Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. b) In Tees, Angles and Channels : ISMC-150
2431.52
-
-
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm
285.6
-
-
Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work.
285.6
-
-
Painting two or more coats with enamel paint of approved brand and manufacture in any shade on new work to give an even shade.
285.6
-
-
carriage charge
1
-
-
Boundary wall
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
152.68
-
-
SH: CONCRETE WORK : Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
16.38
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 2 coarse sand : 4 stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth
14.9
-
-
SH: RCC WORK Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)
9.36
-
-
Reinforcement cement concrete work in columns, pillars,post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)
17.33
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)
20.3
-
-
Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete.
95.68
-
-
b) Column, pillars, posts and struts etc.
301.39
-
-
c) Lintels, beams, girders, bressumers and cantilevers etc
162
-
-
Reinforcement of RCC work including bending, binding and placing in position complete. a) Tar/ TMT steel
4427.55
-
-
SH: BRICK WORK Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
302.4
-
-
Extra for half brick masonry in superstructure above plinth level and up to floor two level.
302.4
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. a) Plain grill.
2194.5
-
-
SH: FINISHING 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
604.8
-
-
Colour washing such as green, blue or buff on new work (two or more coats) including a base coat of white washing with lime to give an even shade.
864
-
-
Carriage Charge
1
-
-
Internal road 570.70 Mtr
-
-
-
Preparation of sub grade (Preparation of sub grade by excavating earth to an average depth of 22.50cm, dressing to camber and consolodating with road roller, making good the undulations etc. and disposal of surplus earth, lead upto 50m.)
3138.85
-
-
Consolidation of sub-grade with road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc .and rerolling the sub grade.
3138.85
-
-
Water Bound Macadam: Providing & Laying, Spreading and compacting stone aggregate of specific sizes to water bound macadem specifications including spreading in uniform thickness, hand oicking, rolling with vibratory rollar 8-10 tonnes in stages to proper grade and camber, applying & brooming requisitetype of screening/ binding materials to to fillup the interstics of coarse aggregate, watering & compacting to the required density By Manual Means Grading-II (Using Screening Crushable type such as moorum & gravel) Using Screeing type-B
721.94
-
-
Dry Lean Cement Concrete Sub- base (Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.)
313.89
-
-
Cement concrete pavement (Construction of un-reinforced, dowel jointed plain cement concrete pavement over a prepared sub base with 43 grade cement @400kg per cum, coarse and fine aggregate conforming to IS383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continous operation including provision of contraction, expansion, construction and longitudinal joints, joints filler, separation memberance, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing)
627.77
-
-
Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165mm respectively, 250mm high in M20 grade PCC on M-10 grade foundation 150mm thick, foundation having 50mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408). Using Concrete Mixer
20
-
-
Centring and shuttering including strutting, propping etc. and removal of form for : Walls. Plinth & string courses
433.73
-
-
Reinforcement of RCC work including bending, binding and placing in position complete. Tar/TMT steel
33956.65
-
-
carriage Charge
1
-
-
Hostel Building civil works
-
-
-
Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30cm size, saturated soil and rock), lift upto 1.50m and stacking the excavated soil not more than 3m clear from the edge of the excavation and returing the stacked soil in 15cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
415.8
-
-
Re-filling excavated earth in foundations and plinth etc. in 15cm layer including ramming and watering etc. complete.
321.12
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
34.99
-
-
Providing and laying in foundations and plinth cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) excluding the cost of centring and shuttering.
61.62
-
-
Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5 mm nominal size)
32.49
-
-
Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by manufacturers.
8.32
-
-
Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 kg. per sqm. on damp proof course after cleaing the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
32.49
-
-
Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
69
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in: M20 (1 cement : 1.5 cparse samd : 3 stone aggregate 20mm nominal size)
40.84
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1:3 (1 cement : 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centring, shuttering and reinforcement. a. M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20mm nominal size).
40.32
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1:3 (1 cement :3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a. M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20mm nominal size).
132.48
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)
72.32
-
-
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20mm nominal size)
18.94
-
-
Centring and shuttering including strutting, propping etc. and removal of form work for: Foundation, footings, bases of columns etc. and mass concrete.
28.8
-
-
Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5m height)
510.06
-
-
Lintels, beams, girders, bressumers and cantilevers etc.
510.63
-
-
Column, pillars, posts and struts etc.
342
-
-
Reinforcement of RCC work including bending, binding and placing in position complete. b) Tar/ TMT steel
45794.81
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
68.03
-
-
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
175.23
-
-
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1cement: 4 coarse sand) in foundation and plinth.
240.36
-
-
Lime concrete terracing on roofs average thickness 10 cm laid to fall with 25 mm gauge brick ballast and 50% mortar consisting of 1lime putty and 2 surki finished with gur and belgiri treatment complete.
245.34
-
-
Grading Roof for water proofing treatment with: Lime Concrete with 20mm nominal size brick aggregare & 50% lime mortar 1:2 (1 lime putty :2 surkhi)
24.53
-
-
Providing gola 75 x 75 mm in cement concrete 1:2;4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1 : 3 ( 1 cement : 3 fine sand) as per standard design :
63
-
-
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or/ and residual bitumen applied hot @ 1.45kg per sqm. of area for each courese, second course of roofing felt type-3 grade-1 (hessian base self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea size gravel spread at 6 Cu.dm. per sqm. including preparation of surface excluding grading complete.
245.34
-
-
Providing and fixing on wall face C.I Rain water pipes including filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2. 100 mm diameter
20
-
-
Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10mm x 10cm x 10cm of 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc. 100 mm diameter
20
-
-
Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) b)- CI Plain Bend-100mm dia
10
-
-
b)- CI Plain shoe-100mm dia
10
-
-
Making khurras 45 x 45 cm with avg. minimum thickness of 5 cm cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1 mm x 1 m x 400 micron, finished with 12 mm cement plaster 1 : 3 ( 1 cement : 3 coarse sand) and finishing the outlet complete as per drawing.
5
-
-
Providing approved best local wood ( Class-B II) work in frames of doors , windows clerestory windows and other frames , wrought framed and fixed in position.
1.09
-
-
Providing and fixing flush door shutters, decorative type, core of black board construction with frame of 1st class hard wood and well matched 1st class teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. a) 40mm thick including anodized aluminum butt hinges with necessary screws.
42.84
-
-
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
108
-
-
Providing and fixing aluminum handles anodised transparent or dyed to required color or shade with necessary screws etc complete. 100 mm
36
-
-
Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. a) 300 x 10 mm
18
-
-
Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a) 300 x 16 mm
18
-
-
Providing and fixing 50 cm long aluminum kicking plate 100x3.15mm anodised, transparent or dyed to required color or shade with necessary screws etc. complete.
18
-
-
Providing and fixing chromium plated finished 100mm mortice latch and lock with 6 levers and a pair of CP handles with necessary screws etc.
18
-
-
Providing and fixing aluminium floor door stopper anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws, etc. complete.a) Twin rubber stoper (Except Toilet doors)-D3
15
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 60x60 cm refer carpet area calculation
415.26
-
-
SKIRTING/ DADO : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 12mm thick cement mortar 1:3 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm
41.53
-
-
Providing and fixing 1 st quality ceramic glazed wall tiles confirming to IS: 15622 ( thickness to be specified by manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any sizes as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 Cement : 3 Coarse sand) and joining with grey cement slurry @3.30kg per sqm including pointing with white cement mixed with pigment of matching shade complete.
322.14
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x30 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. sqm 1225.10 shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
90
-
-
Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm
51.2
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
520
-
-
12 mm thk cement plaster 1: 4( 1 cement : 4 coarse sand) on walls.
1092.11
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement :4 fine sand)
1092.11
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
2184.23
-
-
Finishing walls with water proofing cement paint of required shade :
1092.11
-
-
Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
2261.24
-
-
Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.
64.5
-
-
With ready mixed pink primer of approved brand and manufacture on resinous wood and plywood works.
94.25
-
-
painting with synthetic enamel paint of approved brand and manufacture to give an even shade- 2 or more coats
102.82
-
-
Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminum paint of approved quality over a priming coat of ready mixed genuine red lead on new work.
32
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS:
1868
810.05
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5.5 mm thickness.
64.5
-
-
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-incharge
complete. 255 X 19 mm.
35
-
-
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section arcound the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment)windows area @ 2.07Kg/m.
133.52
-
-
Add Carraige on building works
1
-
-
Dining Hall Civil works
-
-
-
EXCAVATION AND EARTH WORK Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30cm size, saturated soil and rock), lift upto 1.50m and stacking the excavated soil not more than 3m clear from the edge of the excavation and returing the stacked soil in 15cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
135.2
-
-
Re-filling excavated earth in foundations and plinth etc. in 15cm layer including ramming and watering etc. complete.
118.83
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
15.2
-
-
CONCRETE WORK Providing and laying in foundations and plinth cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) excluding the cost of centring and shuttering.
14.84
-
-
Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5 mm nominal size)
7.87
-
-
Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by manufacturers.
2.01
-
-
Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 kg. per sqm. on damp proof course after cleaing the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
7.87
-
-
Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
69
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in: M20 (1 cement : 1.5 cparse samd : 3 stone aggregate 20mm nominal size)
9.72
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1:3 (1 cement : 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centring, shuttering and reinforcement. a. M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20mm nominal size).
9.63
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1:3 (1 cement :3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a. M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20mm nominal size).
17.17
-
-
Centring and shuttering including strutting, propping etc. and removal of form work for: Foundation, footings, bases of columns etc. and mass concrete.
28.8
-
-
Lintels, beams, girders, bressumers and cantilevers etc.
101.94
-
-
Column, pillars, posts and struts etc.
104.5
-
-
Reinforcement of RCC work including bending, binding and placing in position complete. b) Tar/ TMT steel
6237.78
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
24.74
-
-
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
35.18
-
-
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
35.18
-
-
ROOFING AND TERRACING Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses.
178.5
-
-
Providing and fixing on wall face C.I Rain water pipes including filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2.100 mm diameter
24
-
-
Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10mm x 10cm x 10cm of 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc. 100 mm diameter
24
-
-
Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) b)- CI Plain Bend-100mm dia
10
-
-
b)- CI Plain shoe-100mm dia
10
-
-
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
101.33
-
-
Providing approved best local wood ( Class-B II) work in frames of doors , windows clerestory windows and other frames , wrought framed and fixed in position.
0.23
-
-
Providing and fixing flush door shutters, decorative type, core of black board construction with frame of 1st class hard wood and well matched 1st class teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. a) 40mm thick including anodized aluminum butt hinges with necessary screws.
8.4
-
-
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
24
-
-
Providing and fixing aluminum handles anodised transparent or dyed to required color or shade with necessary screws etc complete. 100 mm
8
-
-
Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. a) 300 x 10 mm
4
-
-
Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a) 300 x 16 mm
4
-
-
Providing and fixing 50 cm long aluminum kicking plate 100x3.15mm anodised, transparent or dyed to required color or shade with necessary screws etc. complete.
4
-
-
Providing and fixing chromium plated finished 100mm mortice latch and lock with 6 levers and a pair of CP handles with necessary screws etc.
4
-
-
Providing and fixing aluminium floor door stopper anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws, etc. complete.a) Twin rubber stoper (Except Toilet doors)-D3
4
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm refer carpet area calculation
101.33
-
-
SKIRTING/ DADO : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 12mm thick cement mortar 1:3 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm
10.13
-
-
Providing and fixing 1 st quality ceramic glazed wall tiles confirming to IS: 15622 ( thickness to be specified by manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any sizes as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 Cement : 3 Coarse sand) and joining with grey cement slurry @3.30kg per sqm including pointing with white cement mixed with pigment of matching shade complete.
42
-
-
Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm
33.05
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
520
-
-
12 mm thk cement plaster 1: 4( 1 cement : 4 coarse sand) on walls.
94.09
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement :4 fine sand)
94.09
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
188.18
-
-
Finishing walls with water proofing cement paint of required shade :
94.09
-
-
Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
94.09
-
-
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.
26.7
-
-
With ready mixed pink primer of approved brand and manufacture on resinous wood and plywood works.
18.48
-
-
painting with synthetic enamel paint of approved brand and manufacture to give an even shade- 2 or more coats
20.16
-
-
Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminum paint of approved quality over a priming coat of ready mixed genuine red lead on new work.
32
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS:
1868
290.18
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading
shall be paid in basic item) With float glass panes of 5.5 mm thickness.
26.7
-
-
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-incharge
complete. 255 X 19 mm.
11
-
-
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section arcound the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment) windows area @ 2.07Kg/m.
49.68
-
-
Carraiage charges
1
-
-
Hostel+Dining Hall Building-Electrical works
-
-
-
POINT WIRING
1
-
-
MCCB, MCB & DB’S
1
-
-
E A R T H I N G
1
-
-
MV CABLE LAYING
1
-
-
MV CABLE JOINTING & END TERMINATION
1
-
-
CONVENTIONAL FIRE ALARM SYSTEM & PUBLIC ADDRESS SYSTEM
1
-
-
SUB DISTRIBUTION PANEL
1
-
-
TELEPHONE SYSTEM
1
-
-
SUPPLY OF LIGHTING FIXTURES & FANS
1
-
-
CABLE WORK
1
-
-
IP CCTV SYSTEM
1
-
-
EXTERNAL LIGHTING
1
-
-
Hostel+ Dinning Hall Building-Plumbing works
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid,10 litre low level white vitreous china flushing cistern & C.P flush bend with fitting & C.I brackets,40mm flush bend,overflow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete including painting of fitting and bracketss,cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid.
9
-
-
Providing and fixing white vitreous china wash basin with C.I./M.S. brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : Flat back wash basin size 550x450 mm with a single 15 mm CP pillar tap
12
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
2
-
-
Providing and fixing CP Brass or MI trap for wash basin and sinks. b) 40 mm dia
12
-
-
Providing and fixing rubber plug for sink or wash basin.
12
-
-
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with CP brass screws and washers.
12
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. 100 mm dia
110
-
-
Providing and fixing sand cast iron heel rest sanitary bend. 100 mm
20
-
-
Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 x100x100 mm
22
-
-
Providing and fixing sand cast iron trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.a) 100 mm inlet and 100 mm outlet
22
-
-
Painting sand cast iron soil spun soil waste vent pipes and fittings with paint of any color such as chocolate, grey or buff etc over a coat of primer (of approved quality) for new work.100 mm diameter pipe
110
-
-
G I Pipes and Fittings Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (internal work) 20 mm dia nominal bore
145
-
-
25 mm dia nominal bore
80
-
-
32 mm dia nominal bore
50
-
-
Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia nominal bore
145
-
-
25 mm dia nominal bore
80
-
-
32 mm dia nominal bore
50
-
-
Providing and fixing brass full way valve with wheel of approved quality. 32 mm nominal bore
5
-
-
Providing and fixing ball valve (brass) of approved quality complete 25 mm nominal bore
2
-
-
Providing and placing on terrace ( at all floor levels ) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
8000
-
-
Providing and fixing CP brass bib cock of approved quality conforming to IS : 8931 20 mm Nominal bore
12
-
-
Providing and fixing brass stop cock of approved quality. 20 mm Nominal bore
9
-
-
Providing and fixing CP Angle Valve for basin mixtures and geysers points EWC Cisterns of approved quality conforming to IS : 8931
42
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150mm diameter
145
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. 250mm
145
-
-
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1: 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
6
-
-
Providing and fixing square mouth SW gully trap class SP-1 complete with CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg. as per standard design. 180x150mm size P type With common burnt clay FPS(non modular) bricks of class designation 7.5.
8
-
-
Providing and fixing white vitreous china Flatback urinal basin of size 430x260x350mm with CI Automatic flushing cistern with fittings, RS or CI Brackets, standard size glvanised steel flush pipe & spreader with brass union & GI clamps complete
a) One urinal basin with 5 ltr cistern
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements