Public Works Department Tender
... More
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Mar 2025
Closing Date26 Mar 2025
Tender Amount₹ 6,94,00,000
Costs
EMD
₹ 6,94,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWDAP_2388_1Bid Award Id
ViewTender No
YA/NIT/SASCI/2024-25/04Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://arunachalpwd.org
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Cold twisted bars.
51246.69
-
-
... More
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
341.16
-
-
... More
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
965.89
-
-
... More
c) Column, pillars, posts and struts etc.
206.63
-
-
... More
d) Lintels, beams, girders, bressumers and cantilevers etc.
1038.56
-
-
... More
f) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
760.52
-
-
... More
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
111.28
-
-
... More
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
25.13
-
-
... More
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
a) Foundations and plinth
149.54
-
-
... More
b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.
149.54
-
-
... More
Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5 mm nominal size).
104.99
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement.
26.88
-
-
... More
Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
104.99
-
-
... More
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
124.06
-
-
... More
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
1488.73
-
-
... More
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
112.64
-
-
... More
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
4.01
-
-
... More
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
90.45
-
-
... More
50 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
77.61
-
-
... More
Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth.
107.87
-
-
... More
Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level.
107.87
-
-
... More
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
8
-
-
... More
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
22
-
-
... More
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
0.55
-
-
... More
Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved pink primer.
a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
26.37
-
-
... More
Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately
1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
283.44
-
-
... More
Providing and fixing glazing in aluminium door,window,ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)
(a) flaot glass panes of 4,00mm thickness
47.24
-
-
... More
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineerin- charge.
71.61
-
-
... More
Providing and fixing 35 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit eading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge.
a) Decorative finish (wood grained finish)
26.9
-
-
... More
Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete
54.6
-
-
... More
Extra for using veneered particle board in item of pelmet 12 mm thick and 150 mm wide.
(a) Teak wood veneering each face
54.6
-
-
... More
Providing and fixing 25 mm dia first class Indian teak wood curtain rods with brackets plugs etc wherever required.
54.6
-
-
... More
12 mm thick cement plaster 1: 3( 1 cement : 4 coarse sand) on walls.
1286.61
-
-
... More
15 mm cement plaster in 1:3 (1 cement :3 fine sand) cement mortor
134.1
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
b) Size of Tile 600x600 mm
446.69
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the oints with white cement and matching pigments etc., complete.
54.42
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
124.26
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
a) 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown Cat Eye or equivalent,
334.69
-
-
... More
Providing and fixing stainless steel ( Grade-304) railing made of hollow tubes chennel plates etc i/c welding ,grinding,buffing polishing & matching curvature ( where required ) and filling the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary acessories and stainless steel dash fasteners,stainless steel bolt etc. of required size on the top of the floor or the side of waist with suitable arrangment as per approval of engineer in charge. ( For payment purpose only weight of steel hand rail by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved stainless steel member shall be considard excluding fixing acessories such as nut,bolt,fastener etc.
653.4
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ tainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
944.81
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
12
-
-
... More
Providing and fixing bright finished brass handles with necessary screws etc. complete.
a) 125 mm
140
-
-
... More
b) 100 mm
6
-
-
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
10
-
-
... More
Providing and fixing bright finished brass tower bolt( barrel type) with necessary screws etc. complete.
a) 250x10 mm
50
-
-
... More
b) 150 mm
88
-
-
... More
c) 100 mm
6
-
-
... More
Providing and fixing MS Hooks and Eyes.
a) 300 x 16 mm
66
-
-
... More
Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.
a) 300 x 16 mm
52
-
-
... More
Providing and fixing WC pan 2098 Campbell EWC S Concealed flushing effenciency with 6/3 LPF as base and manufactured by CERA conforms to UIPC-i
6
-
-
... More
Providing and fixing wash basin white wall hung wash basin with full pedestal super special colour No-4135 made by CERA.
6
-
-
... More
Providing and fixing CP brass waste for wash basins and sinks.
(b) 40 mm dia
6
-
-
... More
Providing and fixing 100 mm sand cast iron grating for gully, floor.
6
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass
6
-
-
... More
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. screws and washers
6
-
-
... More
Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).
a) 750 x 20 mm size
6
-
-
... More
Providing fixing of electric Geyser
6
-
-
... More
Providing and fixing of Telephone shower with C.P. matelic flexible tube and wall hook.
6
-
-
... More
Providing and fixing C.P. Wall mixer 3 in 1
6
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
150 mm diameter
6
-
-
... More
Providing and fixing toilet paper holder :
C.P. brass
6
-
-
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.
300 mm. dia. RCC Pipes
52
-
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 Coarse sand:6 graded stone aggregate 20 mm nomina; size over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and considered and grouted with fine sand including finishing top smooth.
89.4
-
-
... More
Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.
149
-
-
... More
Providing laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement in the proporation of 1:1(1 cement :1fine sand ) including testing of joints etc. complete.
a) 100 mm dia
81.2
-
-
... More
b) 150mm dia
79.8
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand : 10 grade stone aggregate 40 mm nominal size) all-round S.W pipes including bed concrete as per standred design.
a) 100 mm dia
81.2
-
-
... More
b) 150mm dia
79.8
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
Centrifugally cast (spun) iron S & S 100 mm
12
-
-
... More
Providing and fixing plain bend of required degree
Centrifugally cast (spun) iron S & S 100 mm
12
-
-
... More
Providing and fixing collar :
Centrifugally cast (spun) iron S & S 100 mm
12
-
-
... More
Providing and fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet- centrifugally Cast (spun) iron S&S
12
-
-
... More
Providing and fixing CP brass bib cock of approved quality conforming to IS : 8931
15 mm Nominal bore
18
-
-
... More
Providing and fixing CP brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931
15 mm Nominal bore
18
-
-
... More
Providing and fixing CP brass angle valve for basin mixer and gyser points of approved quality conforming to IS : 8931
15 mm Nominal bore
12
-
-
... More
Construction brick masnory manhole in cement mortar 1:4 (1 cement :4 coarse sand ) R.C.C top salb with 1:2:4 mix (1 cement :2 coarse sand :4 grade stone aggregate 20mm nomunal size)foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 grade stone aggregate :4o mm nominal size )inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand )finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand ;4 grade stone aggregate 20mm nominal size 0finished with a floating coat of neat cement complete as per standred design.
inside size 90X80 cm and 60cm deep including C.I cover with frame (light duty )455X610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)
with F.P.S brick with class designation 75
6
-
-
... More
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
2
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type-A, including jointing with seal ring conforing to IS:5382, leaving 10mm gap for thermal expansion, (i) Single Socketed pipes. 110 mm diameter
50
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length
100 mm diameter
76.2
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion. 110 mm diameter Single tee with door
16
-
-
... More
Bend 87.5°
16
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams.
18
-
-
... More
Applying one coat of cement primer of approved brand and manufacture on wall surface :
2037.53
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2037.53
-
-
... More
Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
2037.53
-
-
... More
Finishing walls with textured exterior paint : New work (Two or more coats ) over a base coat of WP cement paint applied @ 2.20kg/10 sqm.
134.1
-
-
... More
Applying priming coat With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood works.
59.33
-
-
... More
French spirit polishing: Two or more coats on new works including a coat of wood filler
59.33
-
-
... More
FIRST FLOOR
Civil Works
-
-
-
... More
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Cold twisted bars.
37306.06
-
-
... More
Centring and shuttering including strutting, propping etc and removal of form work for :
c) Column, pillars, posts and struts etc.
206.63
-
-
... More
d) Lintels, beams, girders, bressumers and cantilevers etc.
533.02
-
-
... More
e) Stairs (excluding landings) except spiral stair cases.
36.94
-
-
... More
f) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
723.59
-
-
... More
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
19.1
-
-
... More
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
61.1
-
-
... More
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
3.91
-
-
... More
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
85.76
-
-
... More
Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth.
126.27
-
-
... More
Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level.
126.27
-
-
... More
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
308
-
-
... More
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
20
-
-
... More
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
0.8
-
-
... More
Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved pink primer.
a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
37.4
-
-
... More
Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately
1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
273.9
-
-
... More
Providing and fixing glazing in aluminium door,window,ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)
(a) flaot glass panes of 4,00mm thickness
45.65
-
-
... More
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineerin- charge.
97.19
-
-
... More
Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit eading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge.
a) Decorative finish (wood grained finish)
36.51
-
-
... More
Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete
65.1
-
-
... More
Extra for using veneered particle board in item of pelmet 12 mm thick and 150 mm wide.
(a) Teak wood veneering each face
65.1
-
-
... More
Providing and fixing 25 mm dia first class Indian teak wood curtain rods with brackets plugs etc wherever required.
65.1
-
-
... More
12 mm thick cement plaster 1: 3( 1 cement : 3 coarse sand) on walls.
1570.7
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
b) Size of Tile 600x600 mm
446.69
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the oints with white cement and matching pigments etc., complete.
54.42
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
124.26
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
a) 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown Cat Eye or equivalent,
322.51
-
-
... More
Providing and fixing stainless steel ( Grade-304) railing made of hollow tubes chennel plates etc i/c welding ,grinding,buffing polishing & matching curvature ( where required ) and filling the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary acessories and stainless steel dash fasteners,stainless steel bolt etc. of required size on the top of the floor or the side of waist with suitable arrangment as per approval of engineer in charge. ( For payment purpose only weight of steel hand rail by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved stainless steel member shall be considard excluding fixing acessories such as nut,bolt,fastener etc.
653.4
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ tainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
913.01
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
19
-
-
... More
Providing and fixing bright finished brass handles with necessary screws etc. complete.
a) 125 mm
156
-
-
... More
b) 100 mm
6
-
-
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
15
-
-
... More
Providing and fixing bright finished brass tower bolt( barrel type) with necessary screws etc. complete.
a) 250x10 mm
70
-
-
... More
b) 150 mm
84
-
-
... More
c) 100 mm
42
-
-
... More
Providing and fixing MS Hooks and Eyes.
a) 300 x 16 mm
63
-
-
... More
Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.
a) 300 x 16 mm
74
-
-
... More
Providing and fixing WC pan 2098 Campbell EWC S Concealed flushing effenciency with 6/3 LPF as base and manufactured by CERA conforms to UIPC-i
14
-
-
... More
Providing and fixing wash basin white wall hung wash basin with full pedestal super special colour No-4135 made by CERA.
14
-
-
... More
Providing and fixing CP brass waste for wash basins and sinks.
(b) 40 mm dia
14
-
-
... More
Providing and fixing 100 mm sand cast iron grating for gully, floor.
14
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass
6
-
-
... More
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. screws and washers
14
-
-
... More
Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).
a) 750 x 20 mm size
14
-
-
... More
Providing fixing of electric Geyser
14
-
-
... More
Providing and fixing of Telephone shower with C.P. matelic flexible tube and wall hook.
14
-
-
... More
Providing and fixing C.P. Wall mixer 3 in 1
14
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
150 mm diameter
14
-
-
... More
Providing and fixing toilet paper holder :
C.P. brass
14
-
-
... More
Providing laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement in the proporation of 1:1(1 cement :1fine sand ) including testing of joints etc. complete.
a) 100 mm dia
27
-
-
... More
b) 150mm dia
79.8
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand : 10 grade stone aggregate 40 mm nominal size) all-round S.W pipes including bed concrete as per standred design.
a) 100 mm dia
27
-
-
... More
b) 150mm dia
79.8
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
Centrifugally cast (spun) iron S & S 100 mm
28
-
-
... More
Providing and fixing plain bend of required degree
Centrifugally cast (spun) iron S & S 100 mm
28
-
-
... More
Providing and fixing collar :
Centrifugally cast (spun) iron S & S 100 mm
28
-
-
... More
Providing and fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet- centrifugally Cast (spun) iron S&S
28
-
-
... More
Providing and fixing CP brass bib cock of approved quality conforming to IS : 8931
15 mm Nominal bore
42
-
-
... More
Providing and fixing CP brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931
15 mm Nominal bore
42
-
-
... More
Providing and fixing CP brass angle valve for basin mixer and gyser points of approved quality conforming to IS : 8931
15 mm Nominal bore
28
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type-A, including jointing with seal ring conforing to IS:5382, leaving 10mm gap for thermal expansion, (i) Single Socketed pipes. 110 mm diameter
50
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length
100 mm diameter
146
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion. 110 mm diameter Single tee with door
32
-
-
... More
Bend 87.5°
32
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams.
26
-
-
... More
Applying one coat of cement primer of approved brand and manufacture on wall surface :
2072.51
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2072.51
-
-
... More
Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
2072.51
-
-
... More
Applying priming coat With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood works.
84.14
-
-
... More
French spirit polishing: Two or more coats on new works including a coat of wood filler
84.14
-
-
... More
SECOND FLOOR
Civil Works
-
-
-
... More
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Cold twisted bars.
27130.05
-
-
... More
Centring and shuttering including strutting, propping etc and removal of form work for :
c) Column, pillars, posts and struts etc.
206.63
-
-
... More
d) Lintels, beams, girders, bressumers and cantilevers etc.
534.62
-
-
... More
e) Stairs (excluding landings) except spiral stair cases.
19.57
-
-
... More
f) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
691.36
-
-
... More
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
19.1
-
-
... More
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
61.1
-
-
... More
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
2.17
-
-
... More
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
52.26
-
-
... More
Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth.
98.9
-
-
... More
Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level.
98.9
-
-
... More
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
308
-
-
... More
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
20
-
-
... More
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
0.8
-
-
... More
Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved pink primer.
a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
37.4
-
-
... More
Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately
1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
273.9
-
-
... More
Providing and fixing glazing in aluminium door,window,ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)
(a) flaot glass panes of 4,00mm thickness
45.65
-
-
... More
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineerin- charge.
97.19
-
-
... More
Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit eading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge.
a) Decorative finish (wood grained finish)
36.51
-
-
... More
Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete
65.1
-
-
... More
Extra for using veneered particle board in item of pelmet 12 mm thick and 150 mm wide.
(a) Teak wood veneering each face
65.1
-
-
... More
Providing and fixing 25 mm dia first class Indian teak wood curtain rods with brackets plugs etc wherever required.
65.1
-
-
... More
12 mm thick cement plaster 1: 3( 1 cement : 3 coarse sand) on walls.
1600.91
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
b) Size of Tile 600x600 mm
446.69
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the oints with white cement and matching pigments etc., complete.
54.42
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
124.26
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
a) 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown Cat Eye or equivalent,
311.64
-
-
... More
Providing and fixing stainless steel ( Grade-304) railing made of hollow tubes chennel plates etc i/c welding ,grinding,buffing polishing & matching curvature ( where required ) and filling the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary acessories and stainless steel dash fasteners,stainless steel bolt etc. of required size on the top of the floor or the side of waist with suitable arrangment as per approval of engineer in charge. ( For payment purpose only weight of steel hand rail by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved stainless steel member shall be considard excluding fixing acessories such as nut,bolt,fastener etc.
653.4
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ tainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
913.01
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
19
-
-
... More
Providing and fixing bright finished brass handles with necessary screws etc. complete.
a) 125 mm
156
-
-
... More
b) 100 mm
6
-
-
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
15
-
-
... More
Providing and fixing bright finished brass tower bolt( barrel type) with necessary screws etc. complete.
a) 250x10 mm
70
-
-
... More
b) 150 mm
84
-
-
... More
c) 100 mm
42
-
-
... More
Providing and fixing MS Hooks and Eyes.
a) 300 x 16 mm
63
-
-
... More
Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.
a) 300 x 16 mm
74
-
-
... More
Providing and fixing WC pan 2098 Campbell EWC S Concealed flushing effenciency with 6/3 LPF as base and manufactured by CERA conforms to UIPC-i
14
-
-
... More
Providing and fixing wash basin white wall hung wash basin with full pedestal super special colour No-4135 made by CERA.
14
-
-
... More
Providing and fixing CP brass waste for wash basins and sinks.
(b) 40 mm dia
14
-
-
... More
Providing and fixing 100 mm sand cast iron grating for gully, floor.
14
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass
14
-
-
... More
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. screws and washers
14
-
-
... More
Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).
a) 750 x 20 mm size
14
-
-
... More
Providing fixing of electric Geyser
14
-
-
... More
Providing and fixing of Telephone shower with C.P. matelic flexible tube and wall hook.
14
-
-
... More
Providing and fixing C.P. Wall mixer 3 in 1
14
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
150 mm diameter
14
-
-
... More
Providing and fixing toilet paper holder :
C.P. brass
14
-
-
... More
Providing laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement in the proporation of 1:1(1 cement :1fine sand ) including testing of joints etc. complete.
a) 100 mm dia
27
-
-
... More
b) 150mm dia
79.8
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand : 10 grade stone aggregate 40 mm nominal size) all-round S.W pipes including bed concrete as per standred design.
a) 100 mm dia
27
-
-
... More
b) 150mm dia
79.8
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
Centrifugally cast (spun) iron S & S 100 mm
28
-
-
... More
Providing and fixing plain bend of required degree
Centrifugally cast (spun) iron S & S 100 mm
28
-
-
... More
Providing and fixing collar :
Centrifugally cast (spun) iron S & S 100 mm
28
-
-
... More
Providing and fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet- centrifugally Cast (spun) iron S&S
28
-
-
... More
Providing and fixing CP brass bib cock of approved quality conforming to IS : 8931
15 mm Nominal bore
42
-
-
... More
Providing and fixing CP brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931
15 mm Nominal bore
42
-
-
... More
Providing and fixing CP brass angle valve for basin mixer and gyser points of approved quality conforming to IS : 8931
15 mm Nominal bore
28
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type-A, including jointing with seal ring conforing to IS:5382, leaving 10mm gap for thermal expansion, (i) Single Socketed pipes. 110 mm diameter
50
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length
100 mm diameter
94
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion. 110 mm diameter Single tee with door
32
-
-
... More
Bend 87.5°
32
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams.
26
-
-
... More
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
8346.52
-
-
... More
Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product)sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses.
Total coated thickness 0.45mm Roofing Sheet.
682.44
-
-
... More
Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product)sheet ridges fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses.
Total coated thickness 0.45mm Roofing Sheet.
135.4
-
-
... More
Providing and fixing MS round holding down bolts with nuts and washer plates etc complete.
For Colunns 300mm Dia &16mmDia
0.62
-
-
... More
Providing and fixing false ceiling at all height including providing & fixing of frame work made of special sections, power pressed from M.s sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the dceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolth, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required llenngth with nuts & bolth of required size and other end oof angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the sppacing of 12 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction prependicular to G.I. wire at every junction, in cluding fixed perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to all/partition with the help of rawl plugs at 450 mm centre, the 25 mm long dry wall screw @ 230 mm interval, including fixing of gypsum boart to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finiishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for boaard, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specifications and direction of Engineer in Charge but excluding the cost of painting with 12.5mm thick tapered edge gypsum plain board conforming to IS:2095-(Part I):2011(Board with BIS Certificate marks)
520.34
-
-
... More
Applying one coat of cement primer of approved brand and manufacture on wall surface :
2102.72
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2102.72
-
-
... More
Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
2102.72
-
-
... More
Applying priming coat With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood works.
84.14
-
-
... More
French spirit polishing: Two or more coats on new works including a coat of wood filler
84.14
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements