Public Works Department Tender
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date10 Aug 2022
Closing Date18 Aug 2022
Tender AmountRefer Documents
Costs
EMD
₹ 4,84,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_PWDAP_862_1Bid Award Id
ViewTender No
JD/NIT/08 of 2022-23Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://arunachaltenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
10.4
-
-
((SH:II- CONCRETE WORK)
-
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
12.73
-
-
Providing and laying damp proof course 25 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm nominal size).
9.5
-
-
(SH:III - RCC WORK)
-
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
10.75
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
14.89
-
-
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20( 1 cement: 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
0.36
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
13.04
-
-
Reinforcement cement concrete work in columns, pillars,post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
3.1
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
2.19
-
-
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers bands and facias up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding the 6 mm to give a smooth and even surface but excluding the cost of centering, shuttering and reinforcement with M20 (1 cement :1.5 fine sand : 3 stone aggregate 12.5 mm nominal size).
2.94
-
-
Reinforced cement concrete work in shelves up to floor two level excluding cost of centering and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
0.3
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Tar/ TMT steel
3728.16
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
70.32
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
117.87
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
111.3
-
-
e) Column, pillars, posts and struts etc.
84.24
-
-
f) Stairs (excluding landings) except spiral stair cases.
16.8
-
-
(SH:IV - BRICK WORK)
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 Cement:6 fine sand)
11.4
-
-
Half Brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement: 3 coarse sand) in foundation and plinth
142.76
-
-
(SH:V - WOOD WORK)
-
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
8.7
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.
a) 38mm thick best available local wood class - B I
4.59
-
-
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
12
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
b) Ornamental grill.
19.2
-
-
Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.
a) 300 x 16 mm
4
-
-
Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete.
a) 250 x 10 mm
2
-
-
d) 100 x 10 mm
2
-
-
Providing and fixing MS handles with necessary screws etc complete.
a) 125 mm
8
-
-
Providing and fixing MS Hooks and Eyes..
a) 150 mm
8
-
-
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
723.53
-
-
SH:VI - FLOORING
-
-
-
25 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
66
-
-
Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor.
a) 18 mm thick
40.77
-
-
SH: VII -ROOFING
-
-
-
Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses.
Details of cost for 179.655 Sq.m. Laying and fixing 20 sheets in 3 row require Overall Sheet area of 20 x 3 x 3.05 x 1.072 plus 3% wastages = 202.061 Sqm After H & L laping as per manufacturer's specification, effective Area Measurable will be 20 x 3x 2.95 x 1.015 = 179.655 Sqm
108.16
-
-
Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet ridges fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses.
Details of cost for 11.75m Laying and fixing 4 lenths of 3.05m each require Overall length of 4 x 3.05 plus 3% wastages = 12.566m After laping as per manufacturer's specification, effective Measurable length will be (4 x 3.05) - (3 x 0.15) = 11.75m
12
-
-
SH: VIII -FINISHING
-
-
-
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
172.99
-
-
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
220.33
-
-
White washing with lime on new work (two or more coats) to give an even shade.
393.32
-
-
Colour washing such as green, blue or buff on new work (two or more coats) including a base coat of white washing with lime to give an even shade.
393.32
-
-
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
45.56
-
-
Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
3.28
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
3.28
-
-
SH:X - DRAINAGE
-
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/Aggrigate 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 fine sand) including shuttering complete.
48
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 100 mm dia SW pipes
8
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggre
a) 100 mm dia SW pipes
8
-
-
SH:XI - WATER SUPPLY
-
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
24
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work) work
a) 15 mm nominal bore
20
-
-
b) 20 mm nominal bore
7
-
-
Providing and fixing brass bib cock of approved quality.
a) 15 mm nominal bore
4
-
-
Providing and fixing brass stop cock of approved quality.
a) 15 mm nominal bore
9
-
-
b) 20 mm nominal bore
2
-
-
Providing and fixing PVC connection pipe with brass union.
A) 30 cm length
a) 15 mm nominal bore
9
-
-
SH:XII - SANITARY INSTALLATION
-
-
-
Providing and fixing white vitreous china pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Litres white vitreous china low-level flushing cistern with fittings and brackets 40 mm white porcelain in enamel led flush band, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.
a) WC pan with white plastic seat and lid.
2
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
2
-
-
Providing and fixing Laboratory sink including making all connection excluding cost of fittings.
a) White glazed fire clay sink size 600x400x200 mm
1
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. a) 75mm dia
8
-
-
Providing and fixing sand cast iron heel rest sanitary bend.
a) 100 mm dia
1.2
-
-
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleat with CP brass screws and washers.
2
-
-
SH:Furniture
-
-
-
Supreme Cushion Chair
20
-
-
Sofa Set
2
-
-
Center Table/Tea Table
6
-
-
Plastic Chair (Supreme)
25
-
-
Speaker Podium
1
-
-
Sound System with all accessories
1
-
-
Red Carpet
95
-
-
SH:- Public Gallery at Vijaynagar-3 Nos.
SH:I- EARTH WORK
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
333.87
-
-
Re-filling excavated earth in foundations and plinth ect. In 15 cm layer including ramming and watering etc complete.
183.03
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
61.02
-
-
SH:II- CONCRETE WORK
-
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
44.55
-
-
Providing and laying damp proof course 25 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm nominal size).
64.59
-
-
SH:III - RCC WORK
-
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
80.58
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
58.32
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
78.63
-
-
Reinforcement cement concrete work in columns, pillars,post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
22.17
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
1.89
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Tar/ TMT steel
14846.61
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
268.11
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
388.62
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
730.08
-
-
e) Column, pillars, posts and struts etc.
216
-
-
SH:IV - BRICK WORK
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand).
38.76
-
-
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
421.2
-
-
SH: V WOOD WORK
-
-
-
Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
1329.9
-
-
SH:VI - ROOFING
-
-
-
Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses
b) 0.63 mm thick GI sheet
739.2
-
-
Providing ridges or hips 60cmove rallinplain G.I.sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia.G.I.limpet and bitumen washers complete. b) 0.63 mm thick GI sheet
168
-
-
SH:VII - FLOORING
-
-
-
40 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
305.04
-
-
SH: VIII -FINISHING
-
-
-
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
1235.52
-
-
SH:IX - MISCELLANEOUS
-
-
-
Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
131.04
-
-
Construction of cement concrete drain 30cm wide and 23cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complet
240
-
-
SH:-Toilet Blocks at Vijaynagar-5 Nos.
SH: Earth Work
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
69.85
-
-
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
7.2
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
2.4
-
-
SH : CONCRETE WORK
-
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
8.3
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.
3.5
-
-
SH : RCC WORK
-
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
11.15
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
3.75
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
1.4
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
4.95
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
59.5
-
-
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
11.2
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
30
-
-
c) Lintels, beams, girders, bressumers and cantilevers etc.
10.3
-
-
d) Column, pillars, posts and struts etc.
80.5
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Cold twisted bars.
1330.75
-
-
SH : BRICK WORK
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
24.55
-
-
Half brick masonry (with best available local bricks) in cement mortar 1 : 4 (1 cement : 4 coarse sand) in foundation and plinth
b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.
101.9
-
-
Extra for brick work in superstructure above floor two level, per floor per Cu.m. (1% of rate of brickwork from plinth up to floor two level).
101.9
-
-
SH : WOOD WORK
-
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
51.3
-
-
Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
23.55
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.
a) 38mm thick best available local wood class - B I
15.4
-
-
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
100
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
a) Plain grill.
21.15
-
-
Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.
a) 300 x 16 mm
10
-
-
Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete.
a) 250 x 10 mm
40
-
-
c) 150 x 10 mm
20
-
-
Providing and fixing MS handles with necessary screws etc complete.
a) 125 mm
20
-
-
a) 100 mm
10
-
-
Providing and fixing MS Hooks and Eyes.
a) 150 mm
40
-
-
SH : FLOORING WORK
-
-
-
Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.
a) 40 mm thick
30.8
-
-
Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor.
a) 18 mm thick
3.6
-
-
SH :ROOFING WORK
-
-
-
Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.
b) 0.63 mm thick GI sheet
48.6
-
-
Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).
18
-
-
Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.
a) Best local approved quality wood.
63
-
-
Extra for making chamfered edges of beading.
63
-
-
SH : FINISHING WORK
-
-
-
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
215.9
-
-
White washing with lime on new work (two or more coats) to give an even shade.
233.9
-
-
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
233.9
-
-
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
233.9
-
-
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
153.2
-
-
Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
63.95
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
63.95
-
-
Applying priming coat with ready mixed primer of approved brand an manufacture on steel work.
48.6
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
63.95
-
-
Painting two or more coats on GI sheets with ready mixed superior paint of approved brand and manufacture on new work to give an even shade.
48.6
-
-
SH : MISCELLANEOUS WORK
-
-
-
Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
22.2
-
-
Providing and fixing 40 mm dia GI Pipe outlet in cement mortar 1 : 3 (1 cement : 3 fine sand) including cutting and making good the wall.
80
-
-
SH : DRAINAGE WORK
-
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
135
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 100 mm dia SW pipes
140
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. .
a) 100 mm dia SW pipes
140
-
-
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
10
-
-
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
5
-
-
SH : WATER SUPPLY WORK
-
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
125
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
a) 15 mm nominal bore
40
-
-
b) 20 mm nominal bore
80
-
-
Providing and fixing brass bib cock of approved quality.
a)15 mm nominal bore
10
-
-
Providing and fixing brass stop cock of approved quality.
a) 15 mm nominal bore
10
-
-
SH : SANITARY WORK
-
-
-
Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required..
a) Long Pan patten WC Pan
10
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
a) One urinal basin with 5 Litres CI automatic flushing cistern
10
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.rnal work).
a) 100 mm dia
10
-
-
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
a) 100 mm inlet and 100 mm outlet
10
-
-
Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand) complete.
a) 100 mm dia
20
-
-
SH : VIP Gallery at Gandhigram
SH:I- EARTH WORK
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
43.01
-
-
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
25.02
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
10.4
-
-
SH:II- CONCRETE WORK
-
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering
10.42
-
-
Providing and laying damp proof course 25 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm nominal size).
9.5
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
9.28
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
12.41
-
-
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20( 1 cement: 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).sand : 3 stone aggregate 20 mm nominal size).
0.14
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
12.2
-
-
Reinforcement cement concrete work in columns, pillars,post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
3.22
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
1.96
-
-
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers bands and facias up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding the 6 mm to give a smooth and even surface but excluding the cost of centering, shuttering and reinforcement with M20 (1 cement :1.5 fine sand : 3 stone aggregate 12.5 mm nominal size).: 3 stone aggregate 20 mm nominal size).
1.18
-
-
Reinforced cement concrete work in shelves up to floor two level excluding cost of centering and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
0.12
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Tar/ TMT steel
3188.94
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
54.64
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
118.47
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
103.04
-
-
e) Column, pillars, posts and struts etc.
86.4
-
-
f) Stairs (excluding landings) except spiral stair cases.
14.4
-
-
g) Vertical and horizontal fins individually or forming box louvers bands and facias
19.6
-
-
SH:IV - CC WORK
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 Cement:6 fine sand)
6.31
-
-
Half Brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement: 3 coarse sand) in foundation and plinth
140.73
-
-
SH:V - WOOD WORK
-
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
8.7
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.
a) 38mm thick best available local wood class - B I
4.59
-
-
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
12
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
b) Ornamental grill.
19.2
-
-
Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.
a) 300 x 16 mm
4
-
-
Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete.
a) 250 x 10 mm
2
-
-
Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete.
d) 100 x 10 mm
2
-
-
Providing and fixing MS handles with necessary screws etc complete.
a) 125 mm
8
-
-
Providing and fixing MS Hooks and Eyes.
a) 150 mm
8
-
-
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
317
-
-
SH:V - FLOORING WORK
-
-
-
25 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement..
66
-
-
Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor.
a) 18 mm thick
40.77
-
-
SH: VII -ROOFING
-
-
-
Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. Details of cost for 179.655 Sq.m. Laying and fixing 20 sheets in 3 row require Overall Sheet area of 20 x 3 x 3.05 x 1.072 plus 3% wastages = 202.061 Sqm After H & L laping as per manufacturer's specification, effective Area Measurable will be 20 x 3x 2.95 x 1.015 = 179.655 Sqm
108.16
-
-
Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet ridges fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses.
Details of cost for 11.75m Laying and fixing 4 lenths of 3.05m each require Overall length of 4 x 3.05 plus 3% wastages = 12.566m After laping as per manufacturer's specification, effective Measurable length will be (4 x 3.05) - (3 x 0.15) = 11.75m
12
-
-
Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).
64
-
-
Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.
i) Best local approved quality wood.
56
-
-
Extra for making chamfered edges of beading.
56
-
-
SH: VIII -FINISHING
-
-
-
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
180.27
-
-
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
168.87
-
-
White washing with lime on new work (two or more coats) to give an even shade.
349.14
-
-
Colour washing such as green, blue or buff on new work (two or more coats) including a base coat of white washing with lime to give an even shade.
349.14
-
-
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
20.36
-
-
Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
3.28
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
3.28
-
-
SH:X - DRAINAGE
-
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/Aggrigate 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 fine sand) including shuttering complete.
22
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 100 mm dia SW pipes
3
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.
a) 100 mm dia SW pipes
3
-
-
SH:XI - WATER SUPPLY
-
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
13
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc
(external work).
a) 15 mm nominal bore
14
-
-
b) 20 mm nominal bore
15
-
-
Providing and fixing brass bib cock of approved quality.
a) 15 mm nominal bore
3
-
-
Providing and fixing brass stop cock of approved quality.
a) 15 mm nominal bore
9
-
-
Providing and fixing brass stop cock of approved quality.
a) 20 mm nominal bore
2
-
-
Providing and fixing PVC connection pipe with brass union.
A) 30 cm length
a) 15 mm nominal bore
9
-
-
SH:XII - SANITARY INSTALLATION
-
-
-
Providing and fixing white vitreous china pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Litres white vitreous china low-level flushing cistern with fittings and brackets 40 mm white porcelain in enamel led flush band, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.
a) WC pan with white plastic seat and lid.
2
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
2
-
-
Providing and fixing Laboratory sink including making all connection excluding cost of fittings.
a) White glazed fire clay sink size 600x400x200 mm
1
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
b) 75 mm dia
5
-
-
Providing and fixing sand cast iron heel rest sanitary bend.
b) 100 mm dia
3
-
-
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleat with CP brass screws and washers.
2
-
-
SH:-Furniture Yardsticks
-
-
-
Supreme Cushion Chair
20
-
-
Sofa Set
2
-
-
Center Table/Tea Table
5
-
-
Plastic Chair (Supreme)
15
-
-
Speaker Podium
1
-
-
Sound System with all accessories
1
-
-
Red Carpet
70
-
-
SH : Public Gallery at Gandhigram-02 Nos.
-
-
-
Clearing and Grubbing Road Land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.)
(i) By Manual Means:-
A ) In area of light jungle
0.72
-
-
SH:I- EARTH WORK
-
-
-
Excavation in Soil by Manual Means. (Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres.
1360
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
222.58
-
-
Re-filling excavated earth in foundations and plinth ect. In 15 cm layer including ramming and watering etc complete.
122.98
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
41
-
-
SH:II- CONCRETE WORK
-
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
19.8
-
-
Providing and laying damp proof course 25 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm nominal size).
43.06
-
-
SH:III - RCC WORK
-
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
53.5
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
36
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
52.42
-
-
Reinforcement cement concrete work in columns, pillars,post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
13.82
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
1.08
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Tar/ TMT steel
10587.8
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
178.74
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
273.48
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
393.12
-
-
e) Column, pillars, posts and struts etc.
288
-
-
SH:IV - BRICK WORK
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand).
25.84
-
-
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
280.8
-
-
SH: V WOOD WORK
-
-
-
Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
536.62
-
-
SH:VI - ROOFING
-
-
-
Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusseses
b) 0.63 mm thick GI sheet
357.5
-
-
Providingridgesorhips60cmoverallinplainG.I.sheetfixedwithgalvanised iron J or L hooks, bolts and nuts 8 mm dia.G.I.limpet and bitumen washers complete. b) 0.63 mm thick GI sheet
55
-
-
SH:VII - FLOORING
-
-
-
40 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
129.6
-
-
SH: VIII -FINISHING
-
-
-
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
1029.6
-
-
SH:IX - MISCELLANEOUS
-
-
-
Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
67.2
-
-
Constructiono of cement concrete drain30cm wide and 23cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete
138
-
-
SH:- Toilet Blocks at Gandhigram-04 Nos.
SH : EARTH WORK
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
55.88
-
-
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
5.76
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
1.92
-
-
SH : CONCRETE WORK
-
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
6.64
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in
b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level. :
2.8
-
-
SH : RCC WORK
-
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
8.92
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
2.16
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
1
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
3.72
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
47.6
-
-
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
8.72
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
20.4
-
-
c) Lintels, beams, girders, bressumers and cantilevers etc.
7.16
-
-
d) Column, pillars, posts and struts etc.
48.32
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Cold twisted bars.
943
-
-
SH : BRICK WORK
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
2.2
-
-
Half brick masonry (with best available local bricks) in cement mortar 1 : 4 (1 cement : 4 coarse sand) in foundation and plinth
b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.
80.56
-
-
Extra for brick work in superstructure above floor two level, per floor per Cu.m. (1% of rate of brickwork from plinth up to floor two level).
80.56
-
-
SH : WOOD WORK
-
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
41.04
-
-
Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
16.88
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.
a) 38mm thick best available local wood class - B I
12.32
-
-
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
80
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws..
a) Plain grill.
16.92
-
-
Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.
a) 300 x 16 mm
8
-
-
Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete.
a) 250 x 10 mm
32
-
-
c) 150 x 10 mm
16
-
-
Providing and fixing MS handles with necessary screws etc complete.
a) 125 mm
16
-
-
b) 100 mm
8
-
-
Providing and fixing MS Hooks and Eyes.
b) 125 mm
32
-
-
SH : FLOORING WORK
-
-
-
Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.
a) 40 mm thick
9.88
-
-
Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor.
a) 18 mm thick
2.48
-
-
SH : ROOFING WORK
-
-
-
Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.
b) 0.63 mm thick GI sheet
38.88
-
-
Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).
14.4
-
-
Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.
a) Best local approved quality wood.
50.4
-
-
Extra for making chamfered edges of beading.
50.4
-
-
SH : FINISHING WORK
-
-
-
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
168.32
-
-
White washing with lime on new work (two or more coats) to give an even shade.
182.72
-
-
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
182.72
-
-
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
182.72
-
-
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
122.56
-
-
Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
51.16
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
51.16
-
-
Applying priming coat with ready mixed primer of approved brand an manufacture on steel work.
38.88
-
-
APainting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
51.16
-
-
Painting two or more coats on GI sheets with ready mixed superior paint of approved brand and manufacture on new work to give an even shade..
38.88
-
-
SH : MISCELLANEOUS WORK
-
-
-
Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
17.76
-
-
Providing and fixing 40 mm dia GI Pipe outlet in cement mortar 1 : 3 (1 cement : 3 fine sand) including cutting and making good the wall.
48
-
-
SH : DRAINAGE WORK
-
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
36
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 100 mm dia SW pipes
24
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes
14.4
-
-
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
4
-
-
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
4
-
-
SH : WATER SUPPLY WORK
-
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
60
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
a) 15 mm nominal bore
24
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
b) 20 mm nominal bore
24
-
-
Providing and fixing brass bib cock of approved quality.
a)15 mm nominal bore
8
-
-
Providing and fixing brass stop cock of approved quality.
a)15 mm nominal bore
8
-
-
SH : SANITARY WORK
-
-
-
Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
a) Long Pan patten WC Pan
8
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
a) One urinal basin with 5 Litres CI automatic flushing cistern
8
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
a) 100 mm dia
8
-
-
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
a) 100 mm inlet and 100 mm outlet
8
-
-
Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand) complete.
a) 100 mm dia
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements