Public Works Department Tender
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Civil And Construction
Eprocure
Opening Date29 Jan 2021
Closing Date12 Feb 2021
Tender AmountRefer Documents
Costs
EMD
₹ 32,14,790Document Cost
₹ 20,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_PWDAP_402_1Bid Award Id
ViewTender No
20/KD/2020-21/Khonsa/KhonsaTender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://www.arunachalpwd.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolishing brick work in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
225.59
-
-
Dismantling wood work of sectional area 40 Sq.cm. and above wrought, framed and fixed in frames, other frames and trusses including stacking the material within 50 m lead.
51.13
-
-
Dismantling wood work of sectional area below 40 Sq.cm. and above wrought, framed and fixed in frames, other frames and trusses including stacking the material within 50 m lead.
4514.4
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutters including chowkhats, architrave, hold fasts etc complete and stcking within 50 m lead.
b) Of area beyond 3 Sq.m.
262
-
-
Dismantling GI sheet roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 m lead.
1695.18
-
-
Dismantling cement, asbestos, celotax or other ceiling or partition hard board partition wall including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead.
1151.25
-
-
Demolishing RCC work including stacking of steel bars and disposal of un-serviceable materials within 50 metres lead.
78.06
-
-
Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 m lead.
a) For thickness of tiles above 25 mm and up to 40 mm
298.08
-
-
SH: SITE DEVELOPMENT
-
-
-
Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)
1477.91
-
-
Excavation in Hilly Area in Ordinary Rock by Mechanical Means not Requiring Blasting. (Excavation in hilly area in ordinary rock not requiring ballasting by mechanical means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 1000 metres )
3448.46
-
-
SH: HOSPITAL BUILDING (BLOCK-A & BLOCK-B)
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
2977.82
-
-
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
813.2
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
196.39
-
-
Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
370.02
-
-
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
a) Foundations and plinth
177.32
-
-
Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
164.25
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)
591.96
-
-
Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)
74.17
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
730.35
-
-
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20( 1 cement: 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
48.59
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)
639.61
-
-
Reinforcement cement concrete work in columns, pillars,post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)
252.77
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
80.43
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
528.01
-
-
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
645.1
-
-
b) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
5799.54
-
-
c) Lintels, beams, girders, bressumers and cantilevers etc
5988.65
-
-
d) Column, pillars, posts and struts etc.
2555.57
-
-
e) Stairs (excluding landings) except spiral stair cases.
543.07
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
a) Tar/ TMT steel
276711.63
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
986.66
-
-
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
570.01
-
-
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
2983.87
-
-
Extra for half brick masonry in superstructure above plinth level and up to floor two level.
2983.87
-
-
Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge
2864.55
-
-
Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge.
292.14
-
-
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm).
377.69
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
361.2
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
105.84
-
-
Providing and fixing chromium plated brass handles with necessary screws etc. complete:
a) 125 mm
802
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
a) 250x10 m
262
-
-
b) 150x10 mm
618
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : a) 250x16 mm
144
-
-
Zinc alloy (white powder coated) handles with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key for uPVC casement door.
95
-
-
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
717.1
-
-
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
a) 20 mm dia
582.5
-
-
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
1280
-
-
Providing and fixing 2.50 cm thick approved local wood eaves boards 23 cm wide with necessary mouldings etc.
17.8
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
a) Ornamental grill.
8183.63
-
-
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete
180
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20 mm x 5 mm size with top and bottom rails of T iron 40 mm x 40 mm x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.
78.83
-
-
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
1369.75
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
a) Size of Tile 1000x1000 mm
3103.01
-
-
Providing and laying Vitrified tiles skirting in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
a) Size of Tile 600x600 mm
3309.07
-
-
Chequered terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete:
a) Light shades using white cement
220.48
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
1857.12
-
-
Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.
a) 0.63 mm thick GI sheet
128.77
-
-
Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.
a) 0.63 mm thick GI sheet
14.6
-
-
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).
5003.95
-
-
Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge.
13344
-
-
Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Flame retardant face insulating board.
A) 12 mm thick
3335.97
-
-
Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).
a) 100 mm diameter pipe
382.5
-
-
Providing and fixing M.S. Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1 : 2 : 4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm nominal size) including cost of cutting holes and making good the wall etc.
a) 100 mm diameter
1190
-
-
Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand).
(A) CI Plain bend -100mm dia
102
-
-
Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand).
(B) CI Plain shoes :100mm dia
102
-
-
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
14867.25
-
-
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
5392.47
-
-
Neat cement punning.
93.28
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
20213.07
-
-
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
3789.97
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer.
20213.07
-
-
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
695.99
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
567.22
-
-
Painting two or more coats on GI sheets with ready mixed superior paint of approved brand and manufacture on new work to give an even shade.
128.77
-
-
Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
280.09
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
8428.08
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/Aggrigate 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
366.61
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 150 mm dia SW pipes
900
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 150 mm dia SW pipes
900
-
-
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
70
-
-
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
8
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
1250
-
-
b) 25 mm nominal bore
500
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
a) 25 mm nominal bore
480
-
-
a) 40 mm nominal bore
420
-
-
b) 80 mm nominal bore
480
-
-
Providing and fixing brass bib cock of approved quality.
a)15 mm nominal bore
236
-
-
Providing and fixing brass full way valve with wheel of approved quality.
a) 32 mm nominal bore
36
-
-
Providing and fixing brass stop cock of approved quality.
a) 15 mm nominal bore
36
-
-
Providing and fixing PVC connection pipe with brass union.
A) 30 cm length
a) 15 mm nominal bore
74
-
-
Providing and filling sand all round GI pipes in external work.
a) 25 mm nominal bore
480
-
-
b) 40 mm nominal bore
420
-
-
c) 80 mm nominal bore
480
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
a) WC pan with white plastic seat and lid.
70
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
a) One urinal basin with 5 Litres CI automatic flushing cistern
4
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
74
-
-
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
81
-
-
Providing and fixing Laboratory sink including making all connection excluding cost of fittings.
a) White vitreous china sink 600x400x200 mm
6
-
-
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
71
-
-
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
71
-
-
Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).
a) 750 x 20 mm size
81
-
-
Providing and fixing toilet paper holder.
a) CP Brass
70
-
-
Providing and fixing soap dish holder a) CP Brass
37
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
a) 100 mm dia
210
-
-
Providing and fixing sand cast iron heel rest sanitary bend.
a) 100 mm dia
70
-
-
Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
a) 100 x 100 x 100 mm
70
-
-
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
a) 100 mm inlet and 100 mm outlet
70
-
-
Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand) complete.
a) 100 mm dia
390
-
-
Painting sand cast iron soil spun soil waste vent pipes and fittings with paint of any color such as chocolate, grey or buff etc over a coat of primer (of approved quality) for new work.
a) 100 mm dia
390
-
-
SH: WATER PROOFING
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(a) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
296.56
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.
1901.05
-
-
Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete.
1901.05
-
-
Providing and Fixing of tripple layer POLYTHENE water tank of 10 KL capacity approved make and quality. With cover and locking arranngement.
30000
-
-
Providing and Fixing of Floor mounted Drinking water dispenser of approved make and quality.
6
-
-
SH: APPROACH ROAD & DRAIN
-
-
-
ExcavationinSoilwithDozerwithleadupto100metres(Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100metres (average lead 50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.)
1434.6
-
-
Excavation in Ordinary Rock with Dozer with lead upto 100 metres (Excavation for roadway in ordinary rock by deploying a dozer, 80 HP including cutting and pushing the cut earth to site of embankment upto a distance of 100 metres (average lead 50 metres ), trimming bottom and side slopes in accordancewith the requirementsof lines, grades and cross sections.)
860.76
-
-
Preparation of sub grade (Preparation of sub grade by excavating earth to an average depth of 22.50 cm, dressing to camber and consolidating with road roller, making good the undulations etc. and disposal of surplus earth, lead upto 50 m.)
1450
-
-
Consolidation of sub-grade with road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the sub grade.
1450
-
-
Granular Sub-Base with Coarse Graded Material (Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)
a) for grading- I Materials
290
-
-
Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, handpacking,rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)
A) By Manual Means
I) Grading- II (Using Screening Type-B (11.2mm Agg.)
137.5
-
-
Dry Lean Cement Concrete Sub- base (Construction of drycoarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.)
137.5
-
-
Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing )
206.25
-
-
Cable Duct across the road (Providing and laying of a reinforced cement concree pipe duct 300 mm dia across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minium fill of granular material over top and sides of RCC pipe as per IRC 98- 1997, bedded on a 0.30 mtr thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than level to prevent entry of water anf dirt, all as per IRC: 98 -1997 and approved drawing.
i) Double Row for two utility services.
15
-
-
SH: CC DRAIN
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
162.5
-
-
Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
25
-
-
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
a) Foundations and plinth
76.88
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
a) Cold twisted bars
3595.68
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Founadtion & Footings
500
-
-
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
437.5
-
-
Neat cement punning.
437.5
-
-
SH: STORM WATER DRAIN
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
162.5
-
-
Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
25
-
-
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
a) Foundations and plinth
76.88
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
a) Cold twisted bars
3595.68
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Founadtion & Footings
500
-
-
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
437.5
-
-
Neat cement punning.
437.5
-
-
SH: EXTERNAL SEWERAGE
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
290
-
-
Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
29
-
-
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
a) Foundations and plinth
87
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
39
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
a) Cold twisted bars
7060.09
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Founadtion & Footings
780
-
-
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
500
-
-
Neat cement punning.
500
-
-
SH: FIRE PROTECTION & DETECTION SYSTEM
-
-
-
FIRE PUMP ROOM : Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required:
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55
protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered with anti vibration pads. 1620 lpm at 56 m Head (The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.)
1
-
-
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel riven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts
electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly lastered and with anti vibration pads. 1620 lpm at 56 m Head (The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.)
1
-
-
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.
180 lpm at 56 m head
1
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
a) 25 mm dia
8
-
-
b) 40 mm dia
8
-
-
c) 80 mm dia
8
-
-
d) 100 mm dia
12
-
-
e) 150 mm dia
25
-
-
f) 200 mm dia
10
-
-
g) 250 mm dia
10
-
-
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
a) 80mm
4
-
-
b) 150mm
1
-
-
Supplying, Installing, testing and commissioning wafer type butterfly valves in CI body with integrally moulded liner of Nitrile or EPDM, lever operated with required flanges, nuts, bolts etc. complete. (Test Pressure - PN 10)
a) 80mm
9
-
-
b) 150mm
4
-
-
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
a) 100mm
4
-
-
b) 150mm
2
-
-
Supplying, installing, testing and commissioning Cast Iron Gate valves conforming to IS 14846 (PN 1.6), Non rising stem with hand wheel operation, SS stem, EPDM coated CI wedge 100% vacuum tight design with toroidal sealing rings and over 250 micron epoxy coating.
a) 200 mm
4
-
-
Supplying, installing, testing and commissioning of brass forged body ball valves screwed with teflon seals, stainless steel ball & stem, with all suitable nuts, bolts, etc complete.
a) 40 mm dia
4
-
-
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
4
-
-
Supplying, installing, testing and commissioning of Pressure gauges of 0-16 kg/sqcm for pump sets and pipe lines for the respective floors near to the flow switches with Ball valves, siphon, Fittings like unions / colors / reducers etc. Glycerin filled pressure gauges to use on pump discharge lines.
2
-
-
HYDRANT SYSTEM
-
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
a) 100 mm dia
183
-
-
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
(External Yard Hydrant and underground pipe)
a) 80 mm dia
12
-
-
b) 150 mm dia
350
-
-
Supply, installation, testing & commissioning of R.C.C Hume pipe of NP3,10 kg/sq cm rating ( IS 4985 : 81) laid to the required level and grade with collars jointed with in CM1:3. Including encasing the pipe around a depth of not less than 15cm thick with selected earth (fine aggregate) availble from the excavation as per specification and direction of the engineer. The excavated soil shall be deposited on banks with all lead, lift, including necessary wooden/steel form work where ever required. Depositing of the surplus earth after backfilling to a initial lead of 30 meters. Refilling of the pipe line trenches and foundation with selected earth available from the trench excavation including watering consolidation in layers of 15cm thickness complete as per specifications. The back fill soil shall be graded soil free from stones, pebbles, clay lumps and vegetation etc., complete as per the specifications, and drawings. a) 600 mm dia
25
-
-
Supplying, Installing, testing and commissioning wafer type butterfly valves in CI body with integrally moulded liner of Nitrile or EPDM, lever operated with required flanges, nuts, bolts etc. complete. (Test Pressure - PN 10) a) 100mm
8
-
-
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
a) 3-way - 150 mm dia MS pipe
1
-
-
External Hydrant System :
-
-
-
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :
a) Single Headed Gun metal
6
-
-
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
8
-
-
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
6
-
-
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
a) 40 m
6
-
-
Steel buckets with hanging clamp filled with sand
6
-
-
Internal Hydrant system:
-
-
-
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
a) Single Headed Gun metal
6
-
-
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
12
-
-
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
6
-
-
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
a) 40 m
6
-
-
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required
9
-
-
25mm Air release valve as per IS:14845 ISI Marked
2
-
-
Steel buckets with hanging clamp filled with sand
6
-
-
AUTOMATIC SPRINKLER SYSTEM :
-
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
a) 25 mm dia
650
-
-
b) 32 mm dia
80
-
-
c) 40 mm dia
120
-
-
d) 50 mm dia
180
-
-
e) 65 mm dia
150
-
-
f) 80 mm dia
80
-
-
g) 100 mm dia
50
-
-
h) 150 mm dia
180
-
-
Supplying, installing, testing and commissioning of brass forged body ball valves screwed with teflon seals, stainless steel ball & stem, with all suitable nuts, bolts, etc complete
9
-
-
Supplying, Installing, testing and commissioning wafer type butterfly valves in CI body with integrally moulded liner of Nitrile or EPDM, lever operated with required flanges, nuts, bolts etc. complete. (Test Pressure - PN 10)
a) 150 mm
15
-
-
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
a) Pendent
320
-
-
b) Upright
60
-
-
c) Horizontal Sidewall Sprinkler
54
-
-
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 141 degree centigrade with required accessories :
a) Pendent
6
-
-
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :
a) 100 mm dia
1
-
-
b) 150 mm dia
1
-
-
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required:
a) 1500 mm
24
-
-
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
a) 150 mm dia
8
-
-
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
90
-
-
25mm Air release valve as per IS:14845 ISI Marked
4
-
-
FIRE EXTINGUISHERS :
-
-
-
Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity.
Carbon-di-oxide Gas Type Fire Extinguisher 4.5 Kgs, squeeze Grip, Discharge Time less than 10 Secs, Controllable discharge mechanism with nozzle, bend, Hose and wall mounting bracket etc., Applicable on Class B&C Fire, B Rating 21B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Seamless Cylinder, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI Approved as per IS:2878:2004
6
-
-
ABC Powder 6 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fitted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyester Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006
60
-
-
45 (Ltr) Mechanical Foam Wheeled Fire Extinguisher (AFFF) Based, Operating Temperature Range (+) 5 to (+) 55 oC
2
-
-
AFFF Foam Type fire extinguisher 9 Lt Capacity, Stored Pressure Type, Pressure Gauge, Discharge Time less than 60 Secs, with hose and brackets, Controllable discharge mechanism, Range minimum 6 Meters, applicable on Class A,B, A Rating 13A, B Rating 55B, Can Construction : Deep drawn & CO2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyester Powder coating, Sheet metal thickness : 2.0MM, ISI Approved as per IS 15683:2006
2
-
-
SIGNAGES :
-
-
-
Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC reflective self adhesive vinyl painted foam board, complete with mirror fasteners.
a) Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground. The size of the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished floor near Manual call points.
20
-
-
b) Floor identification signage (i.e., GROUND FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 60cm.
16
-
-
c) Fire Exit signage- Double sided: 150 x 400
Providing and fixing "Fire Exit" letters signage (with or without directional arrows as per signage plan, ref. by architect). Signage to be made of 3 mm thick foam board with edge to edhe self-adhesive, self luminiscent Forex or equivalent inyl stuck on it. Fix green vinyly to cover Forex vinyl leaving 6 mm border around edges with Exit letters cut-out. The exit letters shall be 150 mm height. Double side false ceiling suspended with chain look and hook. Unidirectional, printed both sides with sinle arrow or double arrow.
16
-
-
Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC reflective self adhesive vinyle painted foam board, complete with mirror fasteners.
a) Fire hose reel
16
-
-
b) Lifts
4
-
-
c) Fire extinguishers
36
-
-
d) Analogue addressable Main fire alarm panel
2
-
-
e) Sprinkler control valves
2
-
-
f) Manual Call Points
20
-
-
Stair case Arrow Sign - Imported Acrylic Sheet 4mm, grade 1 autoluminscent film, preplotted media with extra over laminate at the back.
A) Size: 6’’ x 4’’
16
-
-
FIRE DETECTION SYSTEM
-
-
-
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of upporting not less than 240 devices (including detectors) and inimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free atteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Two Loop Panel.
2
-
-
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
2
-
-
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
350
-
-
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
50
-
-
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
20
-
-
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
16
-
-
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
46
-
-
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
36
-
-
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
2500
-
-
[SH: AIR CONDITIONING SYSTEM]
-
-
-
Air Cooled Split Units :
-
-
-
Hydrofolic Golden Fins (Evaporator) :It is imperative to maintain the condenser and evaporator coils and ensure that they do not rust or corrode.
Stabilizer Free Operation: this feature ensures that the AC can withstand voltage fluctuations. Even in low or uneven voltage conditions, the cooling and performance of AC should not be affected.
Self Clean :Self Cleaning function removes the moisture from the indoor unit which causes mould to form.
R32 Green Gas : As well as having a lower global warming potential, R32's other benefits include: It has a lower toxicity, which is good for both human health and the wider environment. It has a high energy efficiency, so will not increase your energy bills.
Inverter Air Conditioner :Consumes less power in comparison to a traditional AC.,. No voltage fluctuation.,. Effective cooling.,. Keeps constant room temperature. 1.5 TR Hi-Wall Split Unit
20
-
-
INLINE FAN FOR EXHAUST AIR : Supply,installation,testing and commissioning of circular / rectengular type Inline type fans complete with motor, blower, mounting arrangement, power and control wiring etc. of below capacity. The Inline fan shall be suitable for 230V, 1Ph., 50Hz AC power supply. The static pressure will be calcualted by HVAC contrctor on basis of final duct layout. a) 150 CFM, 10 mm wc SP for Exhaust Air
6
-
-
b) 650 CFM, 15 mm wc SP for Exhaust Air
1
-
-
c) 800 CFM, 15 mm wc SP for Exhaust Air
2
-
-
PROPELLER FAN : Supply, installtion,Testing and commissioning of Propeller fan wiith motor complete in all respect & of following capacities. The casing of propeller fans Shall be PVC / METALIC and should be lower noise level. The fan shall be suitable for 230V, 1Ph., 50Hz AC power supply,
a) 150 CFM
17
-
-
AXIAL FLOW FAN : Supply, installtion,Testing and commissioning of exhaust unit wiith motor complete in all respect & of following capacities. The casing of fans Shall be PVC / METALIC and should be lower noise level. The fan shall be suitable for 230V, 1Ph., 50Hz AC power supply,
a) 600 CFM
1
-
-
DRAIN PIPING : Supply,installation,testing and commissioning of CPVC drain pipes density 20Kg/m3 complete with fittigs like elbows, tees, reducers, bends, flanges, supports with 9 mm thick class - O nitrile rubber insulatiions complete with supports as per drawings and specifications of below sizes.
a) 32mm dia
100
-
-
b) 25mm dia
60
-
-
GI DUCT : Supply, Febrication & Fixing of 120 GSM GS sheet metal rectangular ducting as per IS 655/SMACNA complete with turning vanes, companion flanges, support, sealing of all seams with a suitable metal sealant as per drawings.
A) 20G
150
-
-
Refrigerant Pipe : Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work suitable for refrigerant R410A/R32 duly insulated with class-O, GC cloth pasted elastomeric nitrile rubber type tubular insulation of density 40 ~60kg/m3 between indoor & out door units. External refrigerant piping shall be laid on 16G GI covered perforated cable trays, it shall include the cost of all the fitting, insulation and all required fittings, joints etc. as per drawings of the following sizes. Piping inside occupied area and vertical shaft shall de supported using GI Hangers. The 19mm thick insulation shall be considered for 19.1mm and above dia copper pipe and 13mm thick from 15.9mm dia and below size. All exposed pipe shall have weather proof quoting on GC Cloth and cost to be included in the piping rate and cable tray is quantified separately. Price of Cable Tray will be charged in item of cable tray in electrical part. External piping should be covred with the GI sheet on cable tray for weather protection. a) 12.7mm dia (0.80mm thick.)
150
-
-
b) 6.4mm dia (0.80mm thick.)
150
-
-
SH: LOW VOLTAGE SYSTEM
-
-
-
NETWORK SYSTEM :
-
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
1 run of cable
12000
-
-
Supply, Installation, Testing & Commissioning of internet socket RJ45 on recessed metal box and cover plate (inclusive) including all accessories as required like connection etc at site.
200
-
-
Supply, Installation, Testing & Commissioning of TV Coaxial socket with metal box on recessed including all required like connection etc at site.
6
-
-
Supply, Installation, Testing & Commissioning of CAT6 patch cord factory crimp cable for connecting RJ 45 including all required like connection etc at site.
a) 1 metre
200
-
-
b) 2 metre
200
-
-
Supply, Installation, Testing & Commissioning of Data Switch 24 port 10/100/1000 mbps, etc as required for site.
12
-
-
Supply, Installation, Testing & Commissioning of Data Switch 16 port 10/100/1000 mbps, etc as required for site.
4
-
-
Supply, Installation, Testing & Commissioning of CAT6 UTP 24 port Patch Panel complete with all accessories complete.
12
-
-
Supply, Installation, Testing & Commissioning of CAT6 UTP 16 port Patch Panel complete with all accessories .
6
-
-
CCTV SYSTEM :
-
-
-
Supplying, installation, testing and commissioning of 32 channels CCTV NVR 2 SATAPORT Network Video Recorder with all accessories such as internet connection, 2x4tb Hard Disk etc. complete in all respect to use at site.
2
-
-
Supplying, installation, testing and commissioning of 16 channels CCTV NVR 2 SATAPORT Network Video Recorder with all accessories such as internet connection, 2x4tb Hard Disk etc. complete in all respect to use at site.
2
-
-
Supplying, installation, testing and commissioning of 2MP full HD 1080p dome IP CCTV camera with all accessories complete in all respect to use at site.
50
-
-
Supplying, installation, testing and commissioning of 2MP full HD 1080p bullet IP CCTV camera IP-66 with all accessories complete in all respect to use at site.
30
-
-
Supplying, installation, testing and commissioning of 24 port rack mountable POE switch complete with all accessories .
2
-
-
Supplying, installation, testing and commissioning of 16 port rack mountable POE switch complete with all accessories .
4
-
-
Supplying, installation, testing and commissioning of 32 inch LED Monitor with VGA and HDMI Ports complete with all accessories .
2
-
-
Supply, installation, testing and commissioning of Closed Network rack with Front Glass Door and Perforated double door on the back, vertical power strips of surge protection sockets, with Front and Rear Equipment mounting angle, Side panels shall be secured with sliding latches operated from inside the rack, Cable Entry at the rear top and bottom. Top Cooling Fans min 2 Nos. Earthing kit, front door lock Bolts nuts and all accessories. For Server Room.
a) 21U Rack
2
-
-
b) 15U Rack
2
-
-
c) 4 U Rack
2
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm
2800
-
-
b) 25 mm
6000
-
-
PUBLIC ADDRESS SYSTEM :
-
-
-
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
2
-
-
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
20
-
-
Supplying, installing, testing and commissioning of Hand held Microphone including accessories as required.
2
-
-
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. a) speaker cable Single pair, 2-core, 1.5 sqmm
600
-
-
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
a) 25 mm
600
-
-
NURSE CALL SYSTEM
-
-
-
Supply, Installation, Testing & Commissioning of call Station Board with Membrane push switches for call and Re-set buttons, & LEDs for Ready, Call and Wait, Connector for console connection, and connector for Patient remote hand set & Patient Remote Handset with flexible cord of 2 meters, Telephone type Jack connector, switceh for call and indication for Ready, Call & Wait.
74
-
-
Supply, Installation, Testing & Commissioning of toilet Pull cord toilet pull Cord with indicator. Rope Length standard 1.5 m
20
-
-
Supply, Installation, Testing & Commissioning of with 8 Nos Red LEDs, Red Acrylic cover suitable for connecting up to 8 beds in one room.
20
-
-
Supply, Installation, Testing & Commissioning Digital display Board with 4 digit (Numeric + Alphabet) display with five No.4 Digit display card, Acralic cover and Hooter with volume control in CRCA box. (Suitable for up to 10 points)
12
-
-
Supply, Installation, Testing & Commissioning Digital display Board with 4 digit (Numeric + Alphabet) display with five No.4 Digit display card, Acralic cover and Hooter with volume control in CRCA box. (Suitable for up to 5 points)
2
-
-
Supply, Installation, Testing & Commissioning Call-Response Monitoring Software- This Software is insalled in Computer at Nursing Station. This Software records call & reset time of each Bedside Call Unit &Toilet Emegency Calling Unit. Calls & reset times got highlighted in red if a call is rest after a pre defined time (Say 8 minutes.) One file can record 60,000 entries & 60,000 files can be created on a computer. Pritout can b e taken of call - Rest times in PDF or in card Copy. On going & previous Call & reset times can be seen on computer at Nursing Station.
2
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
a) 1 run of cable
900
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm
900
-
-
[SH: ALLIED HOSPITAL SERVICES] (Modular Operation Theatre, Lift, Medical Gas pipe line)
-
-
-
Modular Operation Theatre (MOT) comprising of wall & Ceiling system for operating area, steel framework, static dissipative flooring, laminar flow, double dome OT light, touch screen, hatch box, automatic sliding doors, anesthesia pendent, surgeon pendent etc. (a) With Stainless steel technology
2
-
-
Medical Gas Pipeline system (as per intenational standard) comprsising of oxygen, carbon dioxide, nitrous oxide, AGSS, Air-4, Air-7, Vaccum outlets, manifolds, pressure alarm, fully automatic gas control system, Bed head panels, copper wiring, cylinder banks, plant equipments such as compressor, Vaccum pumps etc.
60
-
-
Supplying, installation, testing and commissioning of 33kV substation comprsing of 33kV HT Panel, Transformer 33kV/ 11kV, 11kV HT panel, interconnection, 11 kV HT underground cabling to the distribution substation on ring main sustem, substation earthing, substation safety equipments (For Dedicated Power Supply Arrangement)
250
-
-
Passenger Lift (Bed Lift) Capacity-20 Person, Speed- 0.75m per second
2
-
-
Supplying and istalltion, testing and commissioning of STP/ETP plant of appropriate technology including Civil Works, (except plant room), Tertiary Treatment etc of the building/campus:
(i) Per day plant size up to 50,000 LPD
40
-
-
[SH: WATER SUPPLY & PUBLIC HEALTH]
-
-
-
AIR TO WATER HEAT PUMPS FOR GENERATING HOT WATER: Supply, Erection, Testing & Commissioning of Micro Processor Controlled Modular Air to Water Scroll Heat pump delivering actual capacity as per the following parameters duly installed at site(modules shall operate in master slave combination with automatic run time equalization between the modules. ) The Heat Pump should be complete with Single/multiple hermatic scroll compressors , Condensors, Heat Exchangers, Electronic Expansion Valve,Primary circulation pump, braze plate type (SS316) primary heat exchanger, anitvibration rubber mounts with factory assembled with Electrical panel mounted on the heat pump including the disconnect switch suitable for 50 Hz, 3 Phase, 415 volts, AC supply. The vibration isolators shall be shipped alongwith heat pump from your works. Heat Pump should be capable of generating Hot Water upto 55ºC.
Suitable Nos. & Suitable capacity starter in IP 55 protection, First charge of R410 A refrigerant and oil duly changed at factory, Outdoor ambient air temparature 9.5ºC DB/9ºCDB/9ºCWB, Minimum COP 4.39 at above conditions. Heating Capacity = Cold water inlet Tem = 10 Deg C, Hot water Outlet Temp = 60 Dec C, Air Ambient Temp = 25 Deg C Avg, Minimum Hot water genaration = 3500 Liter/Day, Assumed peak usage hours/day = 4 hours, Refrigerant : R-410A, Syastem should be capable to operate at Air Ambient Temp from 5 to 45 Deg C.
a) Heating capacity = 10 KW , Flowrate = 1500 LPH Nominal, Connection size DN 32, Minimum COP = 4.1
2
-
-
Supply of MS/SS Hot water mixing tank with Glasswool Insulation, Working pressure 4 bar/Testing Pressure 6 bar, Moc - MS. HOT WATER MIXING TANK, CAP:1000 L (1W), Fitted with Air / steam release valve and drain valve
1
-
-
Associated electrical Panels and Accessories including cabling, MCB & RCCBs as required , glands, Supports, Earthings, Terminations etc
1
-
-
PUMPS AND ASSOCIATED ITEMS-WATER SUPPLY AND SEWARAGE:
-
-
-
LIFTING PUMPS FROM TWT TO OHT : Procurement, supply, erection & commissioning of electrically operated clear water multistage vertical lifting pumpsets (IE3 Rating & Suitable for aluminium cabling) self priming type complete with mechanical seals,protection sensors overload/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) level sensing unit & dry run cut off. The pumps should be with C.I. housing, bronze or S.S. impeller,to be housed in Pump room with minimum one size higher port valves for discharge & suction lines.
The pump discharge pipe is to be provided with glycerine filled diaphragm pressure gauge with shatterproof glass & bleed valve . All accessories viz. expansion bellow, pressure gauge, switch, pet cock & all other materials for fixing should be included in the offer. Electrical control panel should be included in the offer as separate item given below.
a) Head : 55 M , Flowrate : 22 GPM (Delivery Port : 40 mm Dia , Minimum Motor Power : 1.2 KW )
2
-
-
b) Head : 55 M , Flowrate : 44 GPM (Delivery Port : 40 mm Dia , Minimum Motor Power : 1.2 KW )
2
-
-
SUBMERSIBLE WASTER WATER TRANSFER PUMP: Procurement, supply, erection & commissioning of electrically operated submersible wastewater transfer pump (IE3 Rating & Suitable for aluminium cabling) complete with mechanical seals,protection sensors overload/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) level sensing unit & dry run cut off. The pumps should be with bronze or S.S. impeller,to be housed inside sumps as indicated in drawing.Minimum Partcle size upto 50 mm and head 20 M.
All accessories for fixing along with delivery hose should be included in the offer. Electrical control panel should be included in the offer.
Head : 20 M Flowrate : 15 Cum/Hr, Delivery pipe size 80 mm
2
-
-
TERRACE BOOSTER PUMP WITH PRESSURE VESSEL: Procurement, supply, erection & commissioning of electrically operated Inline water Pressure booster pump ( (IE3 Rating & Suitable for aluminium cabling)) suitable to be integrated with Pressure Vessel and Hydraulic Pressure drop sensor, complete with Pressure vessel ( Pressure Vessel Type: Single Diaphram type, with SS water Connection and PP liner and including complete with mechanical seals, Air Valves, level sensing unit etc. and size as per manufacturer specification). Pump shall be provided with seals,protection sensors overload/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) level sensing unit & dry run cut off. The pump discharge pipe is to be provided with glycerine filled diaphragm pressure gauge with shatterproof glass & bleed valve . Electrical control panel should be included in the offer as integrated item .
a) Flowrate : 65 GPM or 15 Cum/Hr , Head : 36 M , 2. 4 KW For DWS
1
-
-
b) Flowrate : 45 GPM or 10 Cum/Hr , Head : 36 M , 1.7 KW For FWS
1
-
-
c) Pressure Vessel Capacity : Minimum 50 L , Vertical Type,10 BAR
2
-
-
HOT WATER RECIRCULATION PUMP: Procurement, supply, erection & commissioning of electrically operated inline hot water recirculation pumpset (IE3 Rating & Suitable for aluminium cabling), self priming type complete with mechanical seals,protection sensors overload/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) level sensing unit & dry run cut off. The pumps should be with C.I. housing, bronze or S.S. impeller,to be housed in attic floor with same size port valves for discharge & suction lines. All accessories viz. expansion bellow, pressure gauge, switch, pet cock & all other materials for fixing should be included in the offer. Electrical control panel should be included in the offer as separate item given below.
a) Head : 45 M Flowrate : 20 LPM , Port Size 25 mm
2
-
-
40 KLD CAPACITY SEWAGE CUM EFFLUENT TREATMENT PLANT: Supplying, installation, testing & commissioning of 40 KLD Sewage Cum Effluent Treatment Plant for the following duty (The Plant shall be semi automatic with a central Control panel fully pre/site wired and with all power and control cables to all pumps and equipment including all instrumentation, level switch. ( SBR Type )
Daily Sewage inflow at peak = 35-40 Cum/Day
Daily Effluent inflow at peak = 2-4 Cum/Day
Influent Characteristic = pH - 6.5 - 8.5, BOD = 500 mg/liter, S. Solids = 250-450 mg/liter, COD = 600-800 mg/liter, Oil & Grease = 10 to 50 mg/liter
Effluent discharge standard after treatment = pH - 6.5 - 7.5, BOD = Less than 10 mg/liter, S. Solids = Less than 50 mg/liter, COD = Less Than 100 mg/liter, Oil & Grease = Less Than 10 PPM
1
-
-
DOMESTIC WATER TREATMENT PLANT : Supplying, installation, testing & commissioning of Water Treatment Plant ( capable to deliver 4 cum/ hr Day water at desired quality ( less than 350 PPM) as per codesof practice ). PLANT BREAK UP AS FOLLOWS
-
-
-
IRON REMOVAL FILTER : Supply Erection , testing, Commissioning of approved make Iron Removal Filter filter of FRP make with Epoxy Coated with necessary equipment complete with Frontal piping, valves, suitable supports for mounting, pressure guage, orifice plate etc..,complete as per the detailed specification for the efficient working of system. Pressure Vessel to be designed as per IS 2825 unfired preesure vessel with necessary corrossion allowance along with necessary pumps, fittings, pipes, valves, Supports and accessories.
Flow: 53 M3/Hr and upto 30 M3/day, Max working Pressure : 3.5Kg/SqCM, Minimum working Pressure : 2Kg/SqCM.
Type of Flow : Down Flow, Back Wash : once in a day
1
-
-
ACTIVATED CARBON FILTER : Supply Erection , testing, Commissioning of approved make ACF of FRP construction with necessary equipment complete with Frontal piping, valves, suitable supports for mounting, pressure guage, orifice plate etc..,complete . Pressure Vessel to be designed as per IS 2825 unfired preesure vessel with necessary corrossion allowance. To be supplied along with necessary pumps, fittings, pipes, valves, Supports and accessories . Filter Diameter : Min 600 mm. Height: 1800mm, . Filter media: Activated charcoal ( carbon) Min Flow: 5 M3/hr and up to 30 M3/Day with 6 Hrs Operation , Min Working Pressure:3.5 Kg/cm2. Back Wash : once in a day
1
-
-
MULTI GRADE FILTERS :Supply Erection , testing, Commissioning of approved make ACF of FRP construction necessary equipment complete with Frontal piping, valves, suitable supports for mounting, pressure guage, orifice plate etc..,complete. Pressure Vessel to be designed as per IS 2825 unfired preesure vessel with necessary corrossion allowance. To be supplied along with necessary pumps, fittings, pipes, valves, Supports and accessories . Min Filter Diameter : 800 mm. Height: 1800mm, Shell thick ness : 6 mm, Disk thick ness- 8 mm. Filter media: Filtering sand, gravels and pebbles. Min Flow: 5 M3/hr and up to 30 M3/Day with 6 Hrs Operation , Min Working Pressure:3.5 Kg/cm2. Back Wash : once in a day (Make: Tata/Pentair)
1
-
-
PUMPS, VALVES AND ACCESSORIES : Supplying , testing, Commissioning of All necessary Pumps, Valves and Accessories along with mechanical seals,protection sensors overload/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) with dry run cut off. The pumps should be with bronze or S.S. impeller,to be housed inside designated WTP area Make : Xylem/Kirloskar / Approved Equivalent Flowrate and Head as per Manufacturer Specifications
1
-
-
CHLORINATOR : Supplying of chlorine dosing system consisting of one HDPE tank of 50 litres capacity with a positive displacement diaphragm dosing pump having variable flowrate. The motor shall be suitable for operation at 240 V/Single phase/50 Hz. Supply.
1
-
-
FEED PUMP : Supplying, installing, testing and commissioning vertical online/horizontal centrifugal pumping set with mechanical seal, C.I. Housing, C.I. volute and SS impeller & SS shaft connected to a TEFC induction motor of suitable HP for 415 volts, 3 phase, 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads, base plate wiring upto panel and equipment for water level controller to start and stop the pump automatically at predecided levels of the water in the tank with provision of protection for dry run etc. complete in all respect with provision of protection for dry run etc. complete in all respect.
(The shop drawing of the pumps along with its characteristics, curves, model and technical data etc. are to be submitted for approval before purchase of pump)
WTP Filter feed pump (1 W + 1 SB)
Head 20 M, Capacity : 120 LPM (Kirloskar/Wilo)
2
-
-
Electrical pannel and Accessories
1
-
-
RO PLANT
-
-
-
PRIMARY RO PLANT : Supply ,Testing and Commissioning of R.O. Plant capable to deliver Output water at TDS 150 PPM and along with necessary dozing system to set the TDS value as per requirement (Output water TDS adjustable atleast upto 70 PPM) . Plant should be POWDER coated M.S. skid complete with
i) Required Numbers and grade of membrane (vendor to design and get approval from consultant), ii) 2 element housing, iii) SS 316 Impeller - High Pressure Pump, iv) Control Panel, v) Pr. Gauge, Flow meter, TDS meter & All other Equipments
The Rate Should Include Complete items inclusive of Necessary 3KL PVC Storage Tanks, Valves, Pipings, Pumps, Strainers, Supports and Other accessories . Rate to include piping cost to blend reject from secondary RO back to TWT ( Suction Tank). Backwash once a day. Vendor to consider pre filter reqirement , if any, based on water test at their own cost. Vendor to submit design details, p&ID and plan /section drawings along with membrane calculations for approval. Vendor to submit technical datasheet including membrane details.
1
-
-
SECONDARY RO PLANT : Supply ,Testing and Commissioning of 500 LPH R.O. Plant capable to deliver Output water at TDS 5 PPM and along with necessary dozing system to set the TDS value as per requirement (Output water TDS adjustable atleast upto 2 PPM) . Plant should be epoxy coated M.S. skid complete with :
i) Required Numbers and grade of membrane (vendor to design and get approval from consultant)
ii) 1 no.1 element housing.
iii) SS 316 High Pressure Pump.
iv) Control Panel
v) Pr. Gauge, Flow meter, TDS meter. The Rate Should Include Complete items inclusive of Necessary 1 KL PVC Storage Tanks, Valves, Pipings, Pumps, Strainers, Supports and Other accessories . Backwash once a day
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements