Public Works Department Tender
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Eprocure
Opening Date2 Mar 2024
Closing Date8 Mar 2024
Tender Amount₹ 3,96,00,000
Costs
EMD
₹ 3,96,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDAP_1770_1Bid Award Id
ViewTender No
CD/DRG-II/NIe-T/2023-24/01Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://www.arunachalpwd.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
24.47
-
100
CONCRETE WORK
-
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
-
-
-
a) Foundations and plinth :
41.11
-
100
Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
48.02
-
100
Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 Kg per Sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
12.01
-
100
RCC WORK
-
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
-
-
-
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
56.95
-
100
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface
-
-
-
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
139.17
-
100
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
-
-
-
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
6.86
-
100
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 2 : 4( 1 cement: 2 coarse sand : 4 stone aggregate 20 mm nominal size).
5.66
-
100
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
17.84
-
100
Centring and shuttering including strutting, propping etc and removal of form work for :
-
-
-
a)Foundation, footings, bases of columns etc. and mass concrete.
203.04
-
100
b) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
180
-
100
c) Column, pillars, posts and struts etc.
155.52
-
100
d) Lintels, beams, girders, bressumers and cantilevers etc.
395.26
-
100
Reinforcement of RCC work including bending, binding and placing in position complete.
-
-
-
a)Tar/ TMT steel
9135.3
-
100
BRICK WORK
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
89.22
-
100
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
55.94
-
100
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
55.69
-
100
Extra for half brick masonry in superstructure above plinth level and up to floor two level.
55.69
-
100
WOOD WORK
-
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
2632.5
-
100
Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
1540.07
-
100
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.
-
-
-
a) 38 mm thick best available local wood, class - B I
87.48
-
100
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
320
-
100
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
-
-
-
a) Ornamental grill.
1108.8
-
100
: IRON FITTINGS :
-
-
-
Providing and fixing Aluminium sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.
-
-
-
a)300 x 16 mm
56
-
100
Providing and fixing Aluminium tower bolts (barrel type) with necessary screws etc complete.
-
-
-
a) 250 x 10 mm
32
-
100
b) 150 x 10 mm
168
-
100
Providing and fixing Aluminium handles with necessary screws etc complete.
-
-
-
a)125 mm
56
-
100
b) 100 mm
28
-
100
Providing and fixing MS Hooks and Eyes.
-
-
-
a) 150 mm
52
-
100
Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
50.8
-
100
Timber class A-IV
-
-
-
Providing and fixing 25mm dia first class Indian teak wood curtain rods with brackets plugs etc whereever required.
50.8
-
100
STEEL WORK
-
-
-
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
8
-
100
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
4764.99
-
100
Providing and fixing bolts up to 300 mm in length including nuts and washers complete
1.92
-
100
FLOORING
-
-
-
Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:4 ( 1 Cement : 4 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete.
-
-
-
a) Size of Tile 1000x1000 mm
197.41
-
100
Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:3 ( 1 Cement : 3 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete.
-
-
-
a) Size of Tile 1000x1000 mm
58.28
-
100
White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
90.46
-
100
Chequered terrazzo tiles 22 mm thick with marble chips of sizes up to 6mm in floors on 25 mm thick bed morter 1:3 ( 1 cement: 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete
14.4
-
100
ROOFING
-
-
-
Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.
-
-
-
a) 0.63 mm thick GI sheet
1005.71
-
100
Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.
-
-
-
a) 0.63 mm thick GI sheet
273.72
-
100
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
207.2
-
100
: CEILING :
-
-
-
Providing and fixing 12 mm thick insulated board ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).
170.18
-
100
Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.
-
-
-
a) Best local approved quality wood.
568.56
-
100
Extra for making chamfered edges of beading.
568.56
-
100
Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).
-
-
-
b) 100 mm diameter pipe
72
-
100
Providing and fixing M.S Holder bat clamps of approved design of C.I or S.C.I pipes embedded in and including cement concrete block 10 cm x 10 cm x 10cm of 1:2:4 mix (1 cement :2 coarse sand : 4 stone aggregate 20mm nominal size) including cost of cutting holes and maiking good the wall etc
-
-
-
b) 100 mm diameter pipe
72
-
100
Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand).
-
-
-
A C.I Plain bend
-
-
-
b) 100 mm diameter pipe
48
-
100
B) C.I head flat or corner type bend
-
-
-
b) 100 mm diameter pipe
48
-
100
FINISHING
-
-
-
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
500.26
-
100
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
451.24
-
100
Applying one coat of cement primer of approved brand and manufacture on wall surface.
951.5
-
100
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
951.5
-
100
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
951.5
-
100
Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
271.59
-
100
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
271.59
-
100
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
73.8
-
100
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
271.59
-
100
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
73.8
-
100
Varnishing (two or more coats) with superior quality spar varnish of approved brand and manufacture brand and manufacture on new work including an under coat of flatting varnish with glue sizing.
170.18
-
100
Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work.
255.68
-
100
Painting two or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white,grey or green shades on new work to give an even shade
255.68
-
100
DRAINAGE
-
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
134
-
100
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
a) 100 mm dia SW pipes
72
-
100
b) 150 mm dia SW pipes
72
-
100
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.
-
-
-
a) 100 mm dia SW pipes
72
-
100
b) 150 mm dia SW pipes
144
-
100
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
-
-
-
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
12
-
100
WATER SUPPLY
-
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
-
-
-
a) 15 mm nominal bore
180
-
100
b) 20mm nominal bore
360
-
100
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
-
-
-
a) 25 mm nominal bore
180
-
100
Providing and fixing brass bib cock of approved quality.
-
-
-
a)15 mm nominal bore
48
-
100
b)20mm nominal bore
12
-
100
Providing and fixing brass stop cock of approved quality.
-
-
-
a) 15 mm nominal bore
12
-
100
b) 20 mm nominal bore
12
-
100
Providing and fixing PVC connection pipe with brass union.
-
-
-
A) 30 cm length
-
-
-
a) 15 mm nominal bore
16
-
100
Providing and fixing non-return valve of approved quality.
-
-
-
a) 25 mm nominal bore
12
-
100
Painting GI pipes and fitting with two coats of anti corrosive bitumastic paint of approved qualtiy.
-
-
-
a) 15 mm nominal bore
540
-
100
b) 20 mm nominal bore
360
-
100
Providing and filling sand all round GI pipes in external work.
-
-
-
a) 25 mm nominal bore
540
-
100
SANITARY INSTALLATION
-
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
-
-
-
a) WC pan with white plastic seat and lid.
4
-
100
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
-
-
-
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
4
-
100
Providing and fixing kitchen sink including making all connection excluding cost of fittings.
-
-
-
a) White glazed fire clay sink size 600x450x150 mm
4
-
100
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
12
-
100
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
8
-
100
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
8
-
100
Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand) complete.
-
-
-
b)100 mm dia
12
-
100
Providing and fixing sand cast iron heel rest sanitary bend.
-
-
-
a) 100 mm dia
8
-
100
b) 50 mm dia
8
-
100
Providing and fixing sand cast iron single equal plain junction of required degree with accessdoor, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
a) 100 x 100 x 100 mm
12
-
100
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
-
-
-
b) 100 mm inlet and 75 mm outlet
12
-
100
Internal Electrification for Type-I Quarters
-
-
-
(A) SUB HEAD-I ( WIRING)
-
-
-
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable sizeM.S. box and earthing the point with 1.5mm² FR PVC insulated copper conductor single core cable etc as required
-
-
-
Group "A"
40
-
100
Group "B"
40
-
100
Group "C"
32
-
100
Wiring for twin control light point with 1.5 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way Piano type switch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5 mm² FR PVC insulated copper conductor single core cable etc as required
16
-
100
Wiring for light / power plug with 2x4 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required
180
-
100
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
2 x 2.5 mm² + 1 x 2.5 mm² earth wire
140
-
100
2 x 4.0 mm² + 1 x 4.0 mm² earth wire
140
-
100
SUB-HEAD-II (PVC CONDUIT, METAL BOXES, SWITCHES & ACCESSORIES)
-
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
32 mm
120
-
100
40 mm
60
-
100
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
-
-
-
150 mm x 75 mm x 60 mm deep
12
-
100
150 mm x 150 mm x 60 mm deep
12
-
100
Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc as required
-
-
-
5/6 Amp Switch
16
-
100
3 pin 5/6 amp socket outlet
16
-
100
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
8
-
100
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
63 A TP&N
4
-
100
100 A TP&N
4
-
100
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (4 + 12), Double door
8
-
100
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 way , Double door
8
-
100
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole and neutral
16
-
100
Supplying and fixing brass batten/ angle holder including connection etc. as required.
16
-
100
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
16
-
100
Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
200
-
100
Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required.
100
-
100
Supplying of PVC Junction box 2way, 3 way and 4way
96
-
100
Supply of PVC Bend 20mm /25mm
480
-
100
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
48
-
100
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
8
-
100
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
8
-
100
Supplying of 4'-40 watt Decorative single box type tube fitting with all accessories as required
4
-
100
Supplying of 2' - 20 watt Single Box type flourescent tube fitting complete as required
8
-
100
Supplying of exhaust fan of 300/380 mm sweep
4
-
100
Supplying and fixing of Ding Dong call bell and bell push suitable for 230 VAC supply with all accessories etc. as required.
4
-
100
Supplying & fixing of 4'-40' watt flourescent tube.
20
-
100
Supplying & fixing of 100/60 watt incandescent lamp.
100
-
100
Providing 15A, five in one switch socket combined.
12
-
100
Supplying of Bakelite round sheet 4" diameter
12
-
100
Supplying of PVC flexible pipe of 1" diameter
100
-
100
Suppying of 18 SWG PVC insulated Copper earthing wire
8
-
100
Supplying and Providing of Celing fan
16
-
100
Supplying of Al. Thimble of following sizes :-
-
-
-
35 sqmm
32
-
100
95 sqmm
20
-
100
Drill Bit of size 1/2"
4
-
100
Supplying of Machine Screw of sizes:-
-
-
-
1x1/2"
16
-
100
3/4"
16
-
100
1"
16
-
100
Supplying of Machine Screw with Nut of size 2" length
400
-
100
Supplying of white coloured brass washer
60
-
100
Supplying of Nuts & Bolts of 1" length
400
-
100
( C) 'SUB-HEAD -III(EARTHING)
-
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required..
4
-
100
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
100
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
40
-
100
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
40
-
100
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
40
-
100
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
40
-
100
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
40
-
100
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
100
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
40
-
100
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
48
-
100
SH:-Septic Tank
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
21.11
-
100
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
-
-
-
a) Foundations and plinth
1.86
-
100
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
-
-
-
a) Foundations and plinth
0.82
-
100
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
1.03
-
100
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
-
-
-
a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
0.05
-
100
Centring and shuttering including strutting, propping etc and removal of form work for :
-
-
-
a) uspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
3.47
-
100
b) Lintels, beams, girders, bressumers and cantilevers etc.
0.95
-
100
Reinforcement of RCC work including bending, binding and placing in position complete.
-
-
-
a) Cold twisted steel bars.
184.8
-
100
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
7.41
-
100
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
5.22
-
100
20 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
40.64
-
100
Neat cement punning.
40.64
-
100
Providing and fixing sand cast iron single equal plain junction of required degree.
-
-
-
a) 100 x 100 x 100 mm
2
-
100
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
-
-
-
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
1
-
100
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
1
-
100
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
a) 100 mm dia SW pipes
7.2
-
100
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.
-
-
-
a) 100 mm dia SW pipes
7.2
-
100
SH : Type-II
-
-
-
EARTH WORK
-
-
-
Earth work in excavation in foundation trenches in soils containing 50% or more of shingle or small size boulders up to 30 cm size, lift up to 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
111.52
-
100
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
73.73
-
100
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
15.67
-
100
CONCRETE WORK
-
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
-
-
-
a) Foundations and plinth :
22.16
-
100
Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
18.46
-
100
Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 Kg per Sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
18.46
-
100
RCC WORK
-
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
-
-
-
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
28.48
-
100
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface
-
-
-
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
63.21
-
100
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
-
-
-
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
3.43
-
100
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 2 : 4( 1 cement: 2 coarse sand : 4 stone aggregate 20 mm nominal size).
3.1
-
100
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
10.68
-
100
Centring and shuttering including strutting, propping etc and removal of form work for :
-
-
-
a)Foundation, footings, bases of columns etc. and mass concrete.
101.52
-
100
b) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
125.8
-
100
c) Column, pillars, posts and struts etc.
77.76
-
100
d) Lintels, beams, girders, bressumers and cantilevers etc.
219.6
-
100
Reinforcement of RCC work including bending, binding and placing in position complete.
-
-
-
a)Tar/ TMT steel
7198.12
-
100
BRICK WORK
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
55.21
-
100
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
25.54
-
100
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
56.27
-
100
Extra for half brick masonry in superstructure above plinth level and up to floor two level.
56.27
-
100
WOOD WORK
-
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
1575.94
-
100
Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
588.95
-
100
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.
-
-
-
a) 38 mm thick best available local wood, class - B I
61.25
-
100
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
228
-
100
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
-
-
-
a) Ornamental grill.
585.9
-
100
: IRON FITTINGS :
-
-
-
Providing and fixing Aluminium sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.
-
-
-
a)300 x 16 mm
18
-
100
Providing and fixing Aluminium tower bolts (barrel type) with necessary screws etc complete.
-
-
-
a) 250 x 10 mm
36
-
100
b) 150 x 10 mm
284
-
100
Providing and fixing Aluminium handles with necessary screws etc complete.
-
-
-
a)125 mm
36
-
100
b) 100 mm
40
-
100
Providing and fixing MS Hooks and Eyes.
-
-
-
a) 150 mm
40
-
100
Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
27.9
-
100
Timber class A-IV
-
-
-
Providing and fixing 25mm dia first class Indian teak wood curtain rods with brackets plugs etc whereever required.
27.9
-
100
STEEL WORK
-
-
-
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
6
-
100
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
3031.16
-
100
Providing and fixing bolts up to 300 mm in length including nuts and washers complete
1.08
-
100
FLOORING
-
-
-
Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:4 ( 1 Cement : 4 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete.
-
-
-
a) Size of Tile 1000x1000 mm
118.01
-
100
Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:3 ( 1 Cement : 3 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete.
-
-
-
a) Size of Tile 1000x1000 mm
16.44
-
100
White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
-
-
-
Chequered terrazzo tiles 22 mm thick with marble chips of sizes up to 6mm in floors on 25 mm thick bed morter 1:3 ( 1 cement: 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete
16.37
-
100
ROOFING
-
-
-
Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses.
-
-
-
a) 0.63 mm thick GI sheet
545.38
-
100
Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.
-
-
-
a) 0.63 mm thick GI sheet
165.38
-
100
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
140.6
-
100
: CEILING :
-
-
-
Providing and fixing 12 mm thick insulated board ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).
108.26
-
100
Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.
-
-
-
a) Best local approved quality wood.
337.96
-
100
Extra for making chamfered edges of beading.
337.96
-
100
Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).
-
-
-
b) 100 mm diameter pipe
36
-
100
Providing and fixing M.S Holder bat clamps of approved design of C.I or S.C.I pipes embedded in and including cement concrete block 10 cm x 10 cm x 10cm of 1:2:4 mix (1 cement :2 coarse sand : 4 stone aggregate 20mm nominal size) including cost of cutting holes and maiking good the wall etc
-
-
-
b) 100 mm diameter pipe
36
-
100
Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand).
-
-
-
A C.I Plain bend
-
-
-
b) 100 mm diameter pipe
24
-
100
B) C.I head flat or corner type bend
-
-
-
b) 100 mm diameter pipe
24
-
100
FINISHING
-
-
-
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
264.49
-
100
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
224.31
-
100
Applying one coat of cement primer of approved brand and manufacture on wall surface.
488.8
-
100
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
488.8
-
100
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
488.8
-
100
Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
130.09
-
100
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
130.09
-
100
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
36.9
-
100
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
130.09
-
100
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
36.9
-
100
Varnishing (two or more coats) with superior quality spar varnish of approved brand and manufacture brand and manufacture on new work including an under coat of flatting varnish with glue sizing.
85.09
-
100
Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work.
127.84
-
100
Painting two or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white,grey or green shades on new work to give an even shade
127.84
-
100
DRAINAGE
-
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
67
-
100
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
a) 100 mm dia SW pipes
36
-
100
b) 150 mm dia SW pipes
36
-
100
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.
-
-
-
a) 100 mm dia SW pipes
36
-
100
b) 150 mm dia SW pipes
72
-
100
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
-
-
-
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
6
-
100
WATER SUPPLY
-
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
-
-
-
a) 15 mm nominal bore
90
-
100
b) 20mm nominal bore
180
-
100
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
-
-
-
a) 25 mm nominal bore
120
-
100
Providing and fixing brass bib cock of approved quality.
-
-
-
a)15 mm nominal bore
24
-
100
b)20mm nominal bore
6
-
100
Providing and fixing brass stop cock of approved quality.
-
-
-
a) 15 mm nominal bore
6
-
100
b) 20 mm nominal bore
6
-
100
Providing and fixing PVC connection pipe with brass union.
-
-
-
A) 30 cm length
-
-
-
a) 15 mm nominal bore
8
-
100
Providing and fixing non-return valve of approved quality.
-
-
-
a) 25 mm nominal bore
6
-
100
Painting GI pipes and fitting with two coats of anti corrosive bitumastic paint of approved qualtiy.
-
-
-
a) 15 mm nominal bore
90
-
100
b) 20 mm nominal bore
180
-
100
Providing and filling sand all round GI pipes in external work.
-
-
-
a) 25 mm nominal bore
270
-
100
SANITARY INSTALLATION
-
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
-
-
-
a) WC pan with white plastic seat and lid.
1
-
100
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
-
-
-
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
2
-
100
Providing and fixing kitchen sink including making all connection excluding cost of fittings.
-
-
-
a) White glazed fire clay sink size 600x450x150 mm
1
-
100
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
3
-
100
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
2
-
100
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
2
-
100
Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand) complete.
-
-
-
b)100 mm dia
3
-
100
Providing and fixing sand cast iron heel rest sanitary bend.
-
-
-
a) 100 mm dia
3
-
100
b) 50 mm dia
3
-
100
Providing and fixing sand cast iron single equal plain junction of required degree with accessdoor, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
a) 100 x 100 x 100 mm
3
-
100
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
-
-
-
b) 100 mm inlet and 75 mm outlet
3
-
100
Internal Electrification for Type-II Quarters
-
-
-
(A) SUB HEAD-I ( WIRING)
-
-
-
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable sizeM.S. box and earthing the point with 1.5mm² FR PVC insulated copper conductor single core cable etc as required
-
-
-
Group "A"
30
-
100
Group "B"
30
-
100
Group "C"
20
-
100
Wiring for twin control light point with 1.5 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way Piano type switch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5 mm² FR PVC insulated copper conductor single core cable etc as required
10
-
100
Wiring for light / power plug with 2x4 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required
90
-
100
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
2 x 2.5 mm² + 1 x 2.5 mm² earth wire
100
-
100
2 x 4.0 mm² + 1 x 4.0 mm² earth wire
100
-
100
(B) SUB-HEAD-II (PVC CONDUIT, METAL BOXES, SWITCHES & ACCESSORIES)
-
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
32 mm
90
-
100
40 mm
50
-
100
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
-
-
-
150 mm x 75 mm x 60 mm deep
8
-
100
150 mm x 150 mm x 60 mm deep
6
-
100
Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc as required
-
-
-
5/6 Amp Switch
20
-
100
3 pin 5/6 amp socket outlet
20
-
100
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
10
-
100
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
63 A TP&N
2
-
100
100 A TP&N
2
-
100
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (4 + 12), Double door
4
-
100
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 way , Double door
6
-
100
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole and neutral
12
-
100
Supplying and fixing brass batten/ angle holder including connection etc. as required.
12
-
100
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
12
-
100
Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
100
-
100
Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required.
50
-
100
Supplying of PVC Junction box 2way, 3 way and 4way
48
-
100
Supply of PVC Bend 20mm /25mm
250
-
100
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
24
-
100
Installation of ceiling fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
6
-
100
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
6
-
100
Supplying of 4'-40 watt Decorative single box type tube fitting with all accessories as required
2
-
100
Supplying of 2' - 20 watt Single Box type flourescent tube fitting complete as required
4
-
100
Supplying of exhaust fan of 300/380 mm sweep
2
-
100
Supplying and fixing of Ding Dong call bell and bell push suitable for 230 VAC supply with all accessories etc. as required.
2
-
100
Supplying & fixing of 4'-40' watt flourescent tube.
20
-
100
Supplying & fixing of 100/60 watt incandescent lamp.
40
-
100
Providing 15A, five in one switch socket combined.
12
-
100
Supplying of Bakelite round sheet 4" diameter
12
-
100
Supplying of PVC flexible pipe of 1" diameter
48
-
100
Suppying of 18 SWG PVC insulated Copper earthing wire
10
-
100
Supplying and Providing of Celing fan
8
-
100
Supplying of Al. Thimble of following sizes :-
-
-
-
35 sqmm
16
-
100
95 sqmm
12
-
100
Drill Bit of size 1/2"
4
-
100
Supplying of Machine Screw of sizes:-
-
-
-
1x1/2"
8
-
100
3/4"
8
-
100
1"
8
-
100
Supplying of Machine Screw with Nut of size 2" length
200
-
100
Supplying of white coloured brass washer
30
-
100
Supplying of Nuts & Bolts of 1" length
200
-
100
(C) 'SUB-HEAD -III(EARTHING)
-
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required..
2
-
100
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
100
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
28
-
100
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
26
-
100
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
24
-
100
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
30
-
100
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
30
-
100
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
100
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
24
-
100
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
30
-
100
SH:-Septic Tank
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
42.23
-
100
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
-
-
-
a) Foundations and plinth
3.73
-
100
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :
-
-
-
a) Foundations and plinth
1.64
-
100
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
2.06
-
100
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
-
-
-
a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
0.09
-
100
Centring and shuttering including strutting, propping etc and removal of form work for :
-
-
-
a) uspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
6.95
-
100
b) Lintels, beams, girders, bressumers and cantilevers etc.
1.91
-
100
Reinforcement of RCC work including bending, binding and placing in position complete.
-
-
-
a) Cold twisted steel bars.
369.61
-
100
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
14.81
-
100
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
10.44
-
100
20 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
81.28
-
100
Neat cement punning.
81.28
-
100
Providing and fixing sand cast iron single equal plain junction of required degree.
-
-
-
a) 100 x 100 x 100 mm
4
-
100
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
-
-
-
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
2
-
100
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
2
-
100
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
a) 100 mm dia SW pipes
14.4
-
100
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.
-
-
-
a) 100 mm dia SW pipes
14.4
-
100
SH : Type-III
-
-
-
EARTH WORK
-
-
-
Earth work in excavation in foundation trenches in soils containing 50% or more of shingle or small size boulders up to 30 cm size, lift up to 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
57.83
-
100
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
45.65
-
100
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
9.43
-
100
CONCRETE WORK
-
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
-
-
-
a) Foundations and plinth :
12.27
-
100
Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
9.84
-
100
Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 Kg per Sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
9.84
-
100
RCC WORK
-
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
-
-
-
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
15.83
-
100
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface
-
-
-
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
33.45
-
100
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
-
-
-
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
2.29
-
100
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 2 : 4( 1 cement: 2 coarse sand : 4 stone aggregate 20 mm nominal size).
2.37
-
100
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
6.11
-
100
Centring and shuttering including strutting, propping etc and removal of form work for :
-
-
-
a)Foundation, footings, bases of columns etc. and mass concrete.
62.64
-
100
b) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
61.39
-
100
c) Column, pillars, posts and struts etc.
51.84
-
100
d) Lintels, beams, girders, bressumers and cantilevers etc.
107.14
-
100
e) Vertical and horizontal fins individually or forming box louvers bands and facias.
108.9
-
100
Reinforcement of RCC work including bending, binding and placing in position complete.
-
-
-
a)Tar/ TMT steel
3783.5
-
100
BRICK WORK
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
32.35
-
100
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
19.02
-
100
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
46.89
-
100
Extra for half brick masonry in superstructure above plinth level and up to floor two level.
46.89
-
100
WOOD WORK
-
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
980.16
-
100
Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
332.67
-
100
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.
-
-
-
a) 38 mm thick best available local wood, class - B I
30.06
-
100
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
114
-
100
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
-
-
-
a) Ornamental grill.
413.7
-
100
: IRON FITTINGS :
-
-
-
Providing and fixing Aluminium sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete.
-
-
-
a)300 x 16 mm
9
-
100
Providing and fixing Aluminium tower bolts (barrel type) with necessary screws etc complete.
-
-
-
a) 250 x 10 mm
18
-
100
b) 150 x 10 mm
56
-
100
Providing and fixing Aluminium handles with necessary screws etc complete.
-
-
-
a)125 mm
18
-
100
b) 100 mm
20
-
100
Providing and fixing MS Hooks and Eyes.
-
-
-
a) 150 mm
22
-
100
Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
16.4
-
100
Timber class A-IV
-
-
-
Providing and fixing 25mm dia first class Indian teak wood curtain rods with brackets plugs etc whereever required.
16.4
-
100
STEEL WORK
-
-
-
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
4
-
100
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
1770.51
-
100
Providing and fixing bolts up to 300 mm in length including nuts and washers complete
0.54
-
100
FLOORING
-
-
-
Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:4 ( 1 Cement : 4 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete. a) Size of Tile 1000x1000 mm
71.48
-
100
Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:3 ( 1 Cement : 3 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete. a) Size of Tile 1000x1000 mm
22.32
-
100
White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
24.56
-
100
Chequered terrazzo tiles 22 mm thick with marble chips of sizes up to 6mm in floors on 25 mm thick bed morter 1:3 ( 1 cement: 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete
11.94
-
100
ROOFING
-
-
-
Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. a) 0.63 mm thick GI sheet
334.05
-
100
Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. a) 0.63 mm thick GI sheet
178.45
-
100
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
72.8
-
100
: CEILING :
-
-
-
Providing and fixing 12 mm thick insulated board ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).
63.23
-
100
Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. a) Best local approved quality wood.
114.83
-
100
Extra for making chamfered edges of beading.
114.83
-
100
Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand). b) 100 mm diameter pipe
24
-
100
Providing and fixing M.S Holder bat clamps of approved design of C.I or S.C.I pipes embedded in and including cement concrete block 10 cm x 10 cm x 10cm of 1:2:4 mix (1 cement :2 coarse sand : 4 stone aggregate 20mm nominal size) including cost of cutting holes and maiking good the wall etc b) 100 mm diameter pipe
60
-
100
Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand).
-
-
-
A C.I Plain bend
-
-
-
b) 100 mm diameter pipe
18
-
100
B) C.I head flat or corner type bend
-
-
-
b) 100 mm diameter pipe
18
-
100
FINISHING
-
-
-
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
242.54
-
100
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
163.23
-
100
Applying one coat of cement primer of approved brand and manufacture on wall surface.
405.77
-
100
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
405.77
-
100
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
405.77
-
100
Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
86.42
-
100
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
86.42
-
100
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
18.45
-
100
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
86.42
-
100
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
18.45
-
100
Varnishing (two or more coats) with superior quality spar varnish of approved brand and manufacture brand and manufacture on new work including an under coat of flatting varnish with glue sizing.
42.54
-
100
Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work.
63.92
-
100
Painting two or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white,grey or green shades on new work to give an even shade
63.92
-
100
DRAINAGE
-
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
39.5
-
100
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
a) 100 mm dia SW pipes
18
-
100
b) 150 mm dia SW pipes
18
-
100
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.
-
-
-
a) 100 mm dia SW pipes
18
-
100
b) 150 mm dia SW pipes
36
-
100
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
-
-
-
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
3
-
100
WATER SUPPLY
-
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
-
-
-
a) 15 mm nominal bore
50
-
100
b) 20mm nominal bore
90
-
100
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
-
-
-
a) 25 mm nominal bore
60
-
100
Providing and fixing brass bib cock of approved quality.
-
-
-
a)15 mm nominal bore
12
-
100
b)20mm nominal bore
4
-
100
Providing and fixing brass stop cock of approved quality.
-
-
-
a) 15 mm nominal bore
3
-
100
b) 20 mm nominal bore
3
-
100
Providing and fixing PVC connection pipe with brass union.
-
-
-
A) 30 cm length
-
-
-
a) 15 mm nominal bore
4
-
100
Providing and fixing non-return valve of approved quality.
-
-
-
a) 25 mm nominal bore
3
-
100
Painting GI pipes and fitting with two coats of anti corrosive bitumastic paint of approved qualtiy.
-
-
-
a) 25 mm nominal bore
140
-
100
a) 15 mm nominal bore
50
-
100
Providing and filling sand all round GI pipes in external work.
-
-
-
a) 25 mm nominal bore
140
-
100
SANITARY INSTALLATION
-
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required. a) WC pan with white plastic seat and lid.
1
-
100
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
2
-
100
Providing and fixing kitchen sink including making all connection excluding cost of fittings. a) White glazed fire clay sink size 600x450x150 mm
1
-
100
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
6
-
100
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
2
-
100
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
2
-
100
Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand) complete. b)100 mm dia
4
-
100
Providing and fixing sand cast iron heel rest sanitary bend.
-
-
-
a) 100 mm dia
3
-
100
b) 50 mm dia
3
-
100
Providing and fixing sand cast iron single equal plain junction of required degree with accessdoor, insertion rubber washer 3 mm thick, bolts and nuts complete. a) 100 x 100 x 100 mm
3
-
100
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors. b) 100 mm inlet and 75 mm outlet
3
-
100
Internal Electrification for Type-II Quarters
-
-
-
(A) SUB HEAD-I ( WIRING)
-
-
-
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable sizeM.S. box and earthing the point with 1.5mm² FR PVC insulated copper conductor single core cable etc as required
-
-
-
Group "A"
15
-
100
Group "B"
15
-
100
Group "C"
10
-
100
Wiring for twin control light point with 1.5 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way Piano type switch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5 mm² FR PVC insulated copper conductor single core cable etc as required
10
-
100
Wiring for light / power plug with 2x4 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required
60
-
100
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
a) 2 x 2.5 mm² + 1 x 2.5 mm² earth wire
60
-
100
b) 2 x 4.0 mm² + 1 x 4.0 mm² earth wire
60
-
100
SUB-HEAD-II (PVC CONDUIT, METAL BOXES, SWITCHES & ACCESSORIES)
-
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
a) 32 mm
45
-
100
b) 40 mm
25
-
100
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
-
-
-
a) 150 mm x 75 mm x 60 mm deep
4
-
100
b) 150 mm x 150 mm x 60 mm deep
3
-
100
Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc as required
-
-
-
a) 5/6 Amp Switch
10
-
100
b) 3 pin 5/6 amp socket outlet
10
-
100
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
5
-
100
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
a) 63 A TP&N
1
-
100
b) 100 A TP&N
1
-
100
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double door
2
-
100
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way , Double door
3
-
100
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole and neutral
6
-
100
Supplying and fixing brass batten/ angle holder including connection etc. as required.
6
-
100
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
6
-
100
Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
50
-
100
Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required.
25
-
100
Supplying of PVC Junction box 2way, 3 way and 4way
24
-
100
Supply of PVC Bend 20mm /25mm
125
-
100
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
12
-
100
Installation of ceiling fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
3
-
100
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
3
-
100
Supplying of 4'-40 watt Decorative single box type tube fitting with all accessories as required
1
-
100
Supplying of 2' - 20 watt Single Box type flourescent tube fitting complete as required
2
-
100
Supplying of exhaust fan of 300/380 mm sweep
1
-
100
Supplying and fixing of Ding Dong call bell and bell push suitable for 230 VAC supply with all accessories etc. as required.
1
-
100
Supplying & fixing of 4'-40' watt flourescent tube.
5
-
100
Supplying & fixing of 100/60 watt incandescent lamp.
24
-
100
Providing 15A, five in one switch socket combined.
4
-
100
Supplying of Bakelite round sheet 4" diameter
3
-
100
Supplying of PVC flexible pipe of 1" diameter
25
-
100
Suppying of 18 SWG PVC insulated Copper earthing wire
4
-
100
Supplying and Providing of Celing fan
4
-
100
Supplying of Al. Thimble of following sizes :-
-
-
-
a) 35 sqmm
8
-
100
b) 95 sqmm
5
-
100
Drill Bit of size 1/2"
2
-
100
Supplying of Machine Screw of sizes:-
-
-
-
a) 1x1/2"
4
-
100
b) 3/4"
4
-
100
c) 1"
4
-
100
Supplying of Machine Screw with Nut of size 2" length
100
-
100
Supplying of white coloured brass washer
15
-
100
Supplying of Nuts & Bolts of 1" length
100
-
100
(C) 'SUB-HEAD -III(EARTHING)
-
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required..
1
-
100
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
-
100
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
12
-
100
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
14
-
100
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
12
-
100
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
12
-
100
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
12
-
100
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
-
100
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
12
-
100
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
15
-
100
( SH:-Septic Tank)
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
21.11
-
100
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: a) Foundations and plinth
1.86
-
100
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth
0.82
-
100
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
1.03
-
100
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
0.05
-
100
Centring and shuttering including strutting, propping etc and removal of form work for :
-
-
-
a) uspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
3.47
-
100
b) Lintels, beams, girders, bressumers and cantilevers etc.
0.95
-
100
Reinforcement of RCC work including bending, binding and placing in position complete. a) Cold twisted steel bars.
184.8
-
100
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
7.41
-
100
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
5.22
-
100
20 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
40.64
-
100
Neat cement punning.
40.64
-
100
Providing and fixing sand cast iron single equal plain junction of required degree. a) 100 x 100 x 100 mm
2
-
100
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
-
-
-
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
1
-
100
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
1
-
100
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 100 mm dia SW pipes
7.2
-
100
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes
7.2
-
100
SH : Type-IV
-
-
-
EARTH WORK
-
-
-
Earth work in excavation in foundation trenches in soils containing 50% or more of shingle or small size boulders up to 30 cm size, lift up to 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
72.08
-
100
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
77.32
-
100
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
18.48
-
100
CONCRETE WORK
-
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: a) Foundations and plinth :
19.59
-
100
Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
14.1
-
100
Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 Kg per Sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
14.1
-
100
RCC WORK
-
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
16.9
-
100
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
51.69
-
100
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
2.67
-
100
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 2 : 4( 1 cement: 2 coarse sand : 4 stone aggregate 20 mm nominal size).
1.63
-
100
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
7.99
-
100
Centring and shuttering including strutting, propping etc and removal of form work for :
-
-
-
a)Foundation, footings, bases of columns etc. and mass concrete.
70.56
-
100
b) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
132.82
-
100
c) Column, pillars, posts and struts etc.
60.48
-
100
d) Lintels, beams, girders, bressumers and cantilevers etc.
166.17
-
100
e) Vertical and horizontal fins individually or forming box louvers bands and facias.
53.31
-
100
Reinforcement of RCC work including bending, binding and placing in position complete.
-
-
-
a)Tar/ TMT steel
5569.56
-
100
BRICK WORK
-
-
-
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
55.24
-
100
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
27.69
-
100
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
85.73
-
100
Extra for half brick masonry in superstructure above plinth level and up to floor two level.
85.73
-
100
WOOD WORK
-
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
858.75
-
100
Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.
500.45
-
100
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws. a) 38 mm thick best available local wood, class - B I
27.05
-
100
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
102
-
100
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. a) Ornamental grill.
515.55
-
100
: IRON FITTINGS :
-
-
-
Providing and fixing Aluminium sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete. a)300 x 16 mm
12
-
100
Providing and fixing Aluminium tower bolts (barrel type) with necessary screws etc complete.
-
-
-
a) 250 x 10 mm
18
-
100
b) 150 x 10 mm
32
-
100
Providing and fixing Aluminium handles with necessary screws etc complete.
-
-
-
a)125 mm
18
-
100
b) 100 mm
20
-
100
Providing and fixing MS Hooks and Eyes. a) 150 mm
21
-
100
Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
22.13
-
100
Timber class A-IV
-
-
-
Providing and fixing 25mm dia first class Indian teak wood curtain rods with brackets plugs etc whereever required.
22.13
-
100
STEEL WORK
-
-
-
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
6
-
100
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
3465.87
-
100
Providing and fixing bolts up to 300 mm in length including nuts and washers complete
0.54
-
100
FLOORING
-
-
-
Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:4 ( 1 Cement : 4 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete. a) Size of Tile 1000x1000 mm
94.64
-
100
Providing and laying vitrified floor tiles in different sizes( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mmthick cement morter 1:3 ( 1 Cement : 3 coarse sand) including grouting the joints with the white cement and matching pigments etc, complete. a) Size of Tile 1000x1000 mm
39.96
-
100
White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
33.08
-
100
Chequered terrazzo tiles 22 mm thick with marble chips of sizes up to 6mm in floors on 25 mm thick bed morter 1:3 ( 1 cement: 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete
7.13
-
100
ROOFING
-
-
-
Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. a) 0.63 mm thick GI sheet
546.62
-
100
Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. a) 0.63 mm thick GI sheet
258.09
-
100
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
72.8
-
100
: CEILING :
-
-
-
Providing and fixing 12 mm thick insulated board ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately).
123.78
-
100
Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling.
-
-
-
a) Best local approved quality wood.
206.58
-
100
Extra for making chamfered edges of beading.
206.58
-
100
Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).
-
-
-
b) 100 mm diameter pipe
30
-
100
Providing and fixing M.S Holder bat clamps of approved design of C.I or S.C.I pipes embedded in and including cement concrete block 10 cm x 10 cm x 10cm of 1:2:4 mix (1 cement :2 coarse sand : 4 stone aggregate 20mm nominal size) including cost of cutting holes and maiking good the wall etc b) 100 mm diameter pipe
60
-
100
Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement: 2 fine sand).
-
-
-
A C.I Plain bend
-
-
-
b) 100 mm diameter pipe
18
-
100
B) C.I head flat or corner type bend
-
-
-
b) 100 mm diameter pipe
18
-
100
FINISHING
-
-
-
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
376.92
-
100
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
286.12
-
100
Applying one coat of cement primer of approved brand and manufacture on wall surface.
663.04
-
100
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
663.04
-
100
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
663.04
-
100
Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.
86.19
-
100
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
86.25
-
100
Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.
20.9
-
100
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
86.19
-
100
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
20.9
-
100
Varnishing (two or more coats) with superior quality spar varnish of approved brand and manufacture brand and manufacture on new work including an under coat of flatting varnish with glue sizing.
123.78
-
100
Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work.
433.81
-
100
Painting two or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white,grey or green shades on new work to give an even shade
433.81
-
100
DRAINAGE
-
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
52.1
-
100
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
a) 100 mm dia SW pipes
18
-
100
b) 150 mm dia SW pipes
18
-
100
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.
-
-
-
a) 100 mm dia SW pipes
18
-
100
b) 150 mm dia SW pipes
36
-
100
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
-
-
-
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
4
-
100
WATER SUPPLY
-
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
-
-
-
a) 15 mm nominal bore
250
-
100
b) 20mm nominal bore
175
-
100
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). a) 25 mm nominal bore
75
-
100
Providing and fixing brass bib cock of approved quality.
-
-
-
a)15 mm nominal bore
7
-
100
b)20mm nominal bore
2
-
100
Providing and fixing brass stop cock of approved quality.
-
-
-
a) 15 mm nominal bore
4
-
100
b) 20 mm nominal bore
4
-
100
Providing and fixing PVC connection pipe with brass union.
-
-
-
A) 30 cm length
-
-
-
a) 15 mm nominal bore
4
-
100
Providing and fixing non-return valve of approved quality. a) 25 mm nominal bore
6
-
100
Painting GI pipes and fitting with two coats of anti corrosive bitumastic paint of approved qualtiy. a) 25 mm nominal bore
250
-
100
Providing and filling sand all round GI pipes in external work. a) 25 mm nominal bore
250
-
100
SANITARY INSTALLATION
-
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required. a) WC pan with white plastic seat and lid.
1
-
100
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
2
-
100
Providing and fixing kitchen sink including making all connection excluding cost of fittings. a) White glazed fire clay sink size 600x450x150 mm
1
-
100
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
6
-
100
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
2
-
100
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
2
-
100
Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar 1 : 2 (1 cement : 2 coarse sand) complete. b)100 mm dia
3
-
100
Providing and fixing sand cast iron heel rest sanitary bend.
-
-
-
a) 100 mm dia
3
-
100
b) 50 mm dia
10
-
100
Providing and fixing sand cast iron single equal plain junction of required degree with accessdoor, insertion rubber washer 3 mm thick, bolts and nuts complete. a) 100 x 100 x 100 mm
10
-
100
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors. b) 100 mm inlet and 75 mm outlet
10
-
100
Internal Electrification for Type-IV Quarters
-
-
-
(A) SUB HEAD-I ( WIRING)
-
-
-
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable sizeM.S. box and earthing the point with 1.5mm² FR PVC insulated copper conductor single core cable etc as required
-
-
-
Group "A"
20
-
100
Group "B"
20
-
100
Group "C"
15
-
100
Wiring for twin control light point with 1.5 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way Piano type switch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5 mm² FR PVC insulated copper conductor single core cable etc as required
10
-
100
Wiring for light / power plug with 2x4 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required
100
-
100
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
a) 2 x 2.5 mm² + 1 x 2.5 mm² earth wire
150
-
100
b) 2 x 4.0 mm² + 1 x 4.0 mm² earth wire
150
-
100
(B) SUB-HEAD-II (PVC CONDUIT, METAL BOXES, SWITCHES & ACCESSORIES)
-
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
a) 32 mm
60
-
100
b) 40 mm
30
-
100
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required
-
-
-
a) 150 mm x 75 mm x 60 mm deep
15
-
100
b) 150 mm x 150 mm x 60 mm deep
15
-
100
Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc as required
-
-
-
a) 5/6 Amp Switch
30
-
100
b) 3 pin 5/6 amp socket outlet
30
-
100
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
15
-
100
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
a) 63 A TP&N
3
-
100
b) 100 A TP&N
3
-
100
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double door
4
-
100
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way , Double door
3
-
100
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required a) Single pole and neutral
10
-
100
Supplying and fixing brass batten/ angle holder including connection etc. as required.
10
-
100
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
10
-
100
Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
100
-
100
Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required.
100
-
100
Supplying of PVC Junction box 2way, 3 way and 4way
24
-
100
Supply of PVC Bend 20mm /25mm
125
-
100
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
12
-
100
Installation of ceiling fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
6
-
100
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
6
-
100
Supplying of 4'-40 watt Decorative single box type tube fitting with all accessories as required
15
-
100
Supplying of 2' - 20 watt Single Box type flourescent tube fitting complete as required
10
-
100
Supplying of exhaust fan of 300/380 mm sweep
4
-
100
Supplying and fixing of Ding Dong call bell and bell push suitable for 230 VAC supply with all accessories etc. as required.
1
-
100
Supplying & fixing of 4'-40' watt flourescent tube.
7
-
100
Supplying & fixing of 100/60 watt incandescent lamp.
15
-
100
Providing 15A, five in one switch socket combined.
4
-
100
Supplying of Bakelite round sheet 4" diameter
3
-
100
Supplying of PVC flexible pipe of 1" diameter
25
-
100
Suppying of 18 SWG PVC insulated Copper earthing wire
4
-
100
Supplying and Providing of Celing fan
4
-
100
Supplying of Al. Thimble of following sizes :-
-
-
-
a) 35 sqmm
8
-
100
b) 95 sqmm
5
-
100
Drill Bit of size 1/2"
5
-
100
Supplying of Machine Screw of sizes:-
-
-
-
a) 1x1/2"
5
-
100
b) 3/4"
5
-
100
c) 1"
5
-
100
Supplying of Machine Screw with Nut of size 2" length
100
-
100
Supplying of white coloured brass washer
15
-
100
Supplying of Nuts & Bolts of 1" length
100
-
100
(C) 'SUB-HEAD -III(EARTHING)
-
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required..
1
-
100
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
-
100
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
12
-
100
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
14
-
100
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
12
-
100
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
12
-
100
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
12
-
100
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
-
100
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
12
-
100
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
15
-
100
SH:-Septic Tank
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
30
-
100
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: a) Foundations and plinth
2.25
-
100
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth
0.82
-
100
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
1.13
-
100
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
0.05
-
100
Centring and shuttering including strutting, propping etc and removal of form work for : a) uspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
3.47
-
100
b) Lintels, beams, girders, bressumers and cantilevers etc.
0.95
-
100
Reinforcement of RCC work including bending, binding and placing in position complete. a) Cold twisted steel bars.
184.8
-
100
Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).
7.41
-
100
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
5.22
-
100
20 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
40.64
-
100
Neat cement punning.
40.64
-
100
Providing and fixing sand cast iron single equal plain junction of required degree. a) 100 x 100 x 100 mm
2
-
100
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
-
-
-
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
1
-
100
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
1
-
100
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 100 mm dia SW pipes
7.2
-
100
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes
7.2
-
100
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements