Public Works Department Tender
... More
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Construction Works
Eprocure
Opening Date21 Dec 2021
Closing Date5 Jan 2022
Tender Amount₹ 12,25,00,000
Costs
EMD
₹ 12,25,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
C/o District Secretariat At Lemmi
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_PWDAP_560_1Bid Award Id
ViewTender No
PKDPKSD/NIT/CMCSRDP/2021-22/15Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://arunachaltenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
505.09
-
-
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
505.09
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
168.36
-
-
... More
SH : II: PCC WORK
-
-
-
... More
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand (Zone III) : 8 graded stone aggregate 40 mm nominal size).
155.22
-
-
... More
SH : III : RCC WORK
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal
of form for :
-
-
-
... More
a) Foundations, footings, bases of columns, etc. for mass concrete
296.58
-
-
... More
Suspended floors, roofs, landings, balconies and access
platform
3970.2
-
-
... More
b) Lintels, beams, plinth beams, girders, bressumers and
cantilevers
2869.6
-
-
... More
c) Columns, Pillars, Piers, Abutments, Posts and Struts
1723.99
-
-
... More
d) Stairs, (excluding landings) except spiral-staircases
137.97
-
-
... More
f) Extra for additional height in centering, shuttering where ever required
with adequate bracing, propping etc., including cost of de-shuttering
and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
... More
e) Suspended floors, roofs, landing, beams and balconies
(Plan area to be measured)
2542.03
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
-
-
-
... More
a) All works upto plinth level : Concrete of M-25 grade Mix with minimum cement content of 330kg/cum
660.11
-
-
... More
b) All works above plinth level upto floor V level : Concrete of M-25 grade Mix with minimum cement content of 330kg/cum
897.27
-
-
... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.
-
-
-
... More
Thermo Mechanically treated bars
194139
-
-
... More
Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 Kg per Sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil
143.9
-
-
... More
SH : IV : BRICK WORK
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
901.16
-
-
... More
Half brick masonry in cement mortar 1:4 (1 cement :4 coarse sand) in foundation and plinth.
2200.73
-
-
... More
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
2200.73
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia M.S. bars at every third course of half brick masonary.
2200.73
-
-
... More
SH : V : FLOORING WORK
-
-
-
... More
Dry Stone Kharanja using stone as directed by Engineer In Charge using approved quality Stones
258.16
-
-
... More
Providing and laying in foundations and plinth cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
168.36
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete
-
-
-
... More
c) Size of Tile 600x600 mm
2737.88
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of eps,over 12mm thick bed of cemen tmortar1:3 (1cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete
-
-
-
... More
c) Size of Tile 600x600 mm
205.9
-
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete
142.15
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
123.71
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse and) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
547.18
-
-
... More
SH : VI : FINISHING WORK
-
-
-
... More
12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
4744.53
-
-
... More
15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.
4821.5
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite of any colour and shade, Area of slab over 0.50 sqm
15.72
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete.
12442.8
-
-
... More
Applying one coat of cement primer of approved brand and manufacture on wall surface.
12442.8
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
4516.53
-
-
... More
Providing and Fixing of Exterior Texture Paint, complete in all respect and in supervision of Engineer-in-charge
228
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : 13.60.1 Two or more coats on new work
7698.27
-
-
... More
Painting two coats with oil wood preservatives of approved brand and manufacture on new work.
678.4
-
-
... More
French spirit polishing (two or more coats) including a coat of wood filler on new work
182.75
-
-
... More
Applying priming coat with ready mixed genuine red lead paint of approved brand and manufacture on steel work.
263.45
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate primimng coat, preparation of surface, etc, complete. On steel surface
263.45
-
-
... More
SH : VII : WOOD/ ALUMINIUM WORK
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood
5.04
-
-
... More
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
190.05
-
-
... More
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
30.24
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
a) For fixed portion
-
-
-
... More
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
1575
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
2028.6
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item)
-
-
-
... More
With float glass panes of 5 mm thickness.
263.45
-
-
... More
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
618
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc.
2634.54
-
-
... More
Providing and fixing aluminum butt hinges anodised, transparent or dyed to required color or shade with necessary screws etc complete.
-
-
-
... More
a) 100 x 63 x 4 mm
618
-
-
... More
Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.
-
-
-
... More
a) 250 x 10 mm
206
-
-
... More
Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.
-
-
-
... More
a) 125 mm
206
-
-
... More
Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a) 300 x 16 mm
206
-
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
103
-
-
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
-
-
-
... More
9.46.3 25 mm dia
286.1
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1077.79
-
-
... More
SH : VIII : SANITARY & PLUMBING WORK
-
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require
-
-
-
... More
a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
16
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.
-
-
-
... More
Kitchen sink without drain board
-
-
-
... More
a) 610x510 mm bowl depth 200 mm
2
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
25
-
-
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
25
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
22
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Semi rigid pipe
-
-
-
... More
a) 40 mm dia
2
-
-
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
5
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
16
-
-
... More
Providing and fixing toilet paper holder :
-
-
-
... More
a) C.P. brass
25
-
-
... More
Providing and fixing soil, waste and vent pipes :
-
-
-
... More
100 mm dia
-
-
-
... More
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
460
-
-
... More
75 mm diameter :
-
-
-
... More
Centrifugally cast (spun) iron socketed pipe as per IS: 3989
85
-
-
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
-
-
-
... More
75 mm dia pipe
10
-
-
... More
100 mm dia pipe
50
-
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
-
-
-
... More
For 100 mm dia pipe
270
-
-
... More
For 75 mm dia pipe
40
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete
-
-
-
... More
100 mm dia
-
-
-
... More
Sand cast iron S&S as per IS - 3989
25
-
-
... More
Providing and fixing heel rest sanitary bend
-
-
-
... More
100 mm dia
-
-
-
... More
Sand cast iron S&S as per IS - 3989
25
-
-
... More
75 mm dia
-
-
-
... More
Sand cast iron S&S as per IS - 3989
5
-
-
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
-
-
-
... More
100 mm
295
-
-
... More
75 mm
30
-
-
... More
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
-
-
-
... More
100mm
200
-
-
... More
75mm
10
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
... More
100 mm inlet and 100 mm outlet
-
-
-
... More
Sand cast iron S&S as per IS - 3989
50
-
-
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
-
-
-
... More
100 mm dia
85
-
-
... More
75 mm dia
18
-
-
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete
25
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
6
-
-
... More
C.P.V.C. PIPES
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Internal work - Exposed on wall
-
-
-
... More
a) 20 mm nominal outer dia Pipes
85
-
-
... More
b) 25 mm nominal outer dia Pipes
120
-
-
... More
c) 32 mm nominal outer dia Pipes
35
-
-
... More
d) 40 mm nominal outer dia Pipes
25
-
-
... More
e) 50 mm nominal outer dia Pipes (For Bottle Trap & O.H. Filling)
75
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge
-
-
-
... More
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
a) 20 mm nominal outer dia Pipes
245
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
External work
-
-
-
... More
20 mm nominal outer dia Pipes
25
-
-
... More
BRASS FITTINGS
-
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
20 mm dia nominal bore
5
-
-
... More
25 mm dia nominal bore
10
-
-
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :
-
-
-
... More
25 mm dia nominal bore
1
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
30 cm length
-
-
-
... More
15 mm nominal bore
5
-
-
... More
45 cm length
-
-
-
... More
15 mm nominal bore
51
-
-
... More
C.P. BRASS FITTINGS
-
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
... More
15 mm nominal bore
25
-
-
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
... More
15 mm nominal bore
5
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
10
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15mm nominal bore
56
-
-
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
25
-
-
... More
Cutting holes up to 30x30 cm in walls including making good the same:
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks
25
-
-
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
65
-
-
... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
85
-
-
... More
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
15
-
-
... More
DRAINAGE
-
-
-
... More
STONE WARE PIPES AND FITTINGS
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
100 mm diameter pipe
20
-
-
... More
150 mm diameter pipe
288
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
-
-
-
... More
100 mm diameter S.W. pipe
20
-
-
... More
150 mm diameter S.W. pipe
288
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
... More
180x150 mm size P type
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
30
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :
-
-
-
... More
b) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
... More
Extra for depth for manholes :
-
-
-
... More
Size 90x80 cm
-
-
-
... More
a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Size 120x90 cm
-
-
-
... More
b) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
-
-
-
... More
a) With 20x20 mm square bar
10
-
-
... More
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg
5
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
... More
a) For pipes 100 to 250 mm diameter
1
-
-
... More
SH : IX : STRUCTURAL GLAZING
-
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment
1430.95
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
-
-
-
... More
(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
-
-
-
... More
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
-
-
-
... More
(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
-
-
-
... More
(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
... More
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporatingprinciples of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
-
-
-
... More
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.
-
-
-
... More
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.
-
-
-
... More
The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or by any other accreditation body which operates in accordance with ISO / IEC 17011 and accredits labs as per ISO/ IEC 17025.
-
-
-
... More
1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr
-
-
-
... More
2. Static Water Penetration Test. (50pa to 1500p) as per ASTME- 331-09 testing method for a range up to 2000 ml.
-
-
-
... More
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml
-
-
-
... More
4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm
-
-
-
... More
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4- 09 testing method for Qualitative test, Tests to be conducted on site.
-
-
-
... More
6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
71.55
-
-
... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.
-
-
-
... More
(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2)
-
-
-
... More
For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.
-
-
-
... More
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
118.44
-
-
... More
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin-Charge.
30
-
-
... More
Providing and fixing of Dorma ES-200 frameless Automatic bi-parting sliding door operator for clear opening size of 2000 mm x2400mm, modular design, including internal cover, eagle sensors on both sides,Electromechanical lock,light barriers and programme switch complete, With Operator Dimensions (LxH x T): 4150x100 x 180 mm. The track profile should be separate from the main profile for enabling reduction in vibration. Microprocessor control, self-learning, reversing when obstruction is encountered. Microprocessorcontrolled control unit. It should be Selflearning, with adjustable parameters for opening and closing speed, hold-open time and opening and closing force. Class of protection IP 20.,The glasses shall be of 12mm clear toughend frameless with polished edges.
-
-
-
... More
Item includes supply installation of toughened high performance glass of thickness 12mm as per ST - 467of Saint Gobain/ Modi/ Asahi Glass or equivalent of including of sealants, brackets, fasteners, screws, sieve, backer rod, bolts, gasket, fixtures, etc. complete) The above work is to be carried out by associate Specialized Agency as per approval of the Engineer-in- Charge
1
-
-
... More
SH : X : FALSE CEILING
-
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board
conforming to IS: 2095- (Part I) : 2011 (Board with BIS
certification marks)
151.83
-
-
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge.
-
-
-
... More
With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)
970.6
-
-
... More
SH : XII : FIRE FIGHTING
-
-
-
... More
Fire Hydrant System
-
-
-
... More
Supply, Installation, Testing & Commissioning of: Single headed, SS/ Gun Metal ISI marked oblique pattern hydrant landing valve with 80 mm dia flanged inlet and 63mm dia instantaneous type female outlet complete with Gun Metal cap and G.I. chain, twist release type plug and all accessories as per 13:5290-1983 (Type 'A')
6
-
-
... More
Supply, Installation, Testing & Commissioning of: First-Aid Fire Hose Reel wall mounting swinging type complete with drum, bracket, ball valve and 20mm dia.x 30M long high pressure Hose Reel tubing as per IS:444 with Gun Metal shut-off nozzle having 5mm dia. orifice. The Hose Reel shall strictly confirm to IS : 884-1985
6
-
-
... More
Supply, Installation, Testing & Commissioning of: Non-percolating flexible hose (RRL type-'A') ISI marked (IS:636) 63 mm dia x 15 M long complete with instantaneous type SS/ Gun Metal 63 mm dia. IS marked Male and female couplings (IS:903) bound and riveted to hose pipe with Gun Metal rivets and 1.5 mm Gun Metal wire
12
-
-
... More
Supply, Installation, Testing & Commissioning of: SS/ Gun Metal 63mm dia short size branch pipes with 20 mm dia nozzle with 63mm instantaneous coupling ISI marked (IS: 903)
6
-
-
... More
Providing & fixing standard fireman's axe with heavy insulated rubber handle.
6
-
-
... More
Supply, Installation, Testing & Commissioning of:M.S. hose door fabricated from 16g M.S. sheet with full glass door and locking arrangement, suitable to accommodate 1 Hydrant landing valve, 1fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe. The door shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx. size 1.2m x .6m x 2.1m )
6
-
-
... More
Supply, Installation, Testing & Commissioning of Gun Metal Fire Brigade connection (Suction collecting head) consisting of 63 mm dia instantaneous type male coupling with built-in check valves and 150 mm dia. flanged outlet complete with bolts, nuts and rubber insertions as required as per IS:904-1983
2
-
-
... More
Supply, Installation, Testing & Commissioning of: M.S. cabinet (to enclose above. Draw-out/Fire brigade inlet connections) fabricated from 16 g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx.0.6 m x 0.6 M x 0.45 M ).
2
-
-
... More
Supply, Installation, Testing & Commissioning of: Air cushion tank (air-vessel) 250 mm dia. x 1.0 M high with dished top, made of minimum 6 mm thick M.S. pipe/plate complete with 25 mm dia. Brass Air Valve (Ball valve, pressure gauge type), 25 mm dia. Stop with brass stop cock, nipple, tees, elbow, pipe and all accessories as required incl. fixing brackets.
1
-
-
... More
SUPPLY, INSTALLATION, TESTING & COMMISSIONING of Mild Steel pipe (IS:1239 Part-I) heavy class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc.including cutting holes in brick or RCC walls/slabs and making good the same complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work.
-
-
-
... More
a) 200 mm dia IS 1239
6
-
-
... More
b) 150 mm dia IS 1239
15
-
-
... More
c) 100 mm dia IS 1239
85
-
-
... More
d) 80 mm dia IS 1239
10
-
-
... More
e) 50 mm dia IS 1239
10
-
-
... More
f) 25 mm dia IS 1239
15
-
-
... More
Supply, Installation,Testing & Commissioning of: Mild Steel black pipe (IS:1239 Part-1) heavy class including cutting, screwing, welding etc.complete with fitting viz. tees elbow, bends, flanges, reducers.etc including providing anti-corrosive treatment (coating & wrapping) with 4mm thick tape and holiday test check as per IS: 10221complete as required including necessary excavation, refilling etc. complete.
-
-
-
... More
a) 150 mm dia
45
-
-
... More
b) 100 mm dia
3
-
-
... More
Supply, Installation, Testing & Commissioning of slim seal dual type non-return valves (PN 1.6) complete with matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes.
-
-
-
... More
a) 150 mm dia
1
-
-
... More
Providing and fixing Slim seal Butterfly valves (PN 1.6) complete with matching flanges rubber insertion, nuts. bolts and washer etc. of following sizes
-
-
-
... More
a) 150 mm dia nominal bore
1
-
-
... More
AUTOMATIC SPRINKLER SYSTEM
-
-
-
... More
SUPPLY, INSTALLATION, TESTING. & COMMISSIONING OF:
-
-
-
... More
Electrical Motor Driven Fire Pumping set suitable for automatic operation consisting of the following as per the specifications.
-
-
-
... More
a) Horizontally mounted, centrifugal type single stage fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 1620 LPM against a total head of 60 M complete with all accessories pressure gauge etc. as required As per approved make
-
-
-
... More
b) Squirrel cage induction motor totally enclosed fan cooled 2900 RPM type suitable for 415 Volts+ 10% - 15% , 3 phase, 50 HZ A.C. supply of suitable capacity for the above pump coupled with flexible coupling including earthling as per relevant Indian Standard & specifications.
-
-
-
... More
c) Common bed plate for mounting Pump and Motor fabricated of suitable M.S.Channel as per manufacturer's recommendations.
-
-
-
... More
d) Suitable RC.C Pump-Foundations as per manufacturer's design and 4 nos.Dunlop (cushy foot) heavy duty Anti vibration mounting pads.
1
-
-
... More
Diesel Engine Driven Fire Pumping set suitable for automatic operation consisting of the following as per specifications
-
-
-
... More
a) Horizontally mounted, centrifugal type single stage/ multi-stage fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 1620 lpm against a total head of 60 m complete with all accessories pressure gauge etc. as required As per approved make
-
-
-
... More
b) Water cooled TAC approved Diesel Engine suitable for developing required BHP at 1800 RPM) for above pump complete with automatic starting mechanism, batteries, automatic battery charger unit, flexible coupling with the pump, coupling with the pump, fuel tank, silencer, exhaust pipe & all standard accessories as required as per TAC rules including earthing, mandatory spares and tool kit.
-
-
-
... More
c) Common bed plate for mounting Pump and Engine fabricated of suitable M.S.Channel as per manufacturer's recommendations.
-
-
-
... More
d) Suitable RCC Pump foundations as per manufacturer ' s design 8 Nos Dunlop Anti-vibration (cushy foot) heavy duty mounting pads.
1
-
-
... More
SUPPLY, INSTALLATION TESTING & COMMISSIONING OF:
-
-
-
... More
a) Electrical Motor Driven Automatic pressurisation (Jockey) pumping set consisting of the following as per specifications. Horizontally mounted centrifugal type single/multi-stage fire pump for building pressure loss due to any leakage in the system and capable to deliver approx 180 LPM against a total head of 60 M with all accessories pressure gauge etc. as required As per approved make
-
-
-
... More
b) Squirrel cage induction motor totally enclosed fan cooled type at 2900 RPM suitable for 415 Volts + 10% - 15% 3 phase. 50 HZ A.C. supply of suitable capacity for the above pump with synchronous speed of 1500/3000 RPM confirming to IS: 325 & duly coupled with above pump coupled with flexible coupling including earthling as per relevant Indian Standard and specifications.
-
-
-
... More
c) Common bed plate for mounting Pump and Motor fabricated of suitable M.S.Channel as per manufacturer's recommendations.
-
-
-
... More
d) Suitable RCC Pump foundations as per manufacturer's design 4 Nos Dunlop Anti-vibration (cushy foot) heavy duty mounting pads.
1
-
-
... More
Supply,Installation,Testing & Commissioning of fire pump on terrace as per specification horizontally mounted centrifugal type for building and capable to deliver approax 450 LPM against a total head of 35M having cast iron body.Bronze impeller, stainless steel shaft and complete with 'Y' strainer on the suction side,butterfly valve on suction and delivery side,non return valve on delivery side and Pressure Gauge with stop G.M. Stop Valve etc. for periodical testing of the working of the pumping set and Suitable RCC Pump foundations as per manufacturer's design 4 Nos Dunlop Anti-vibration (cushy foot) heavy duty mounting pads including all kinds of accessories & valves required for terrace pump installation complete in all respect.
1
-
-
... More
Supply, Installation, Testing & Commissioning of cubical type wall mounted Fire Pump Control Panel (For Terrace Pump at Roof) with One Fully Automatic DOL Starter suitable for 450 LPM Pump Motor with over load relay, timer push buttons and Auto/Manual selector switch.
1
-
-
... More
Supply, Installation, Testing & Commissioning of cubical type floor mounted Fire Pump Control Panel (For Fire Pump Room) fabricated from 14 g M.S. CRCA Sheet duly powder coated finish of approved shade and comprising of :
-
-
-
... More
INCOMING:
-
-
-
... More
One 125 amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA
-
-
-
... More
One- digital Volt Meter (0-500 V) with selector switch
-
-
-
... More
One Set indicating lamps (LED)
-
-
-
... More
BUS BARS OUTGOING:
-
-
-
... More
125 Amp TPN BUS BAR (Aluminum).
-
-
-
... More
One - 100 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA
-
-
-
... More
One - 40 Amp.TP + NL M.C.B. with breaking capacity 10KA
-
-
-
... More
One - 20 Amp.DP M.C.B. with breaking capacity 10KA
-
-
-
... More
Two Fully Automatatic Star-Delta starters suitable for two electric & jockey Pump Motor with over load relay timer push buttons and Auto/Manual selector switch
-
-
-
... More
Four panel type Amp. meters one for each motor with ASS. CTS etc.
-
-
-
... More
Four sets of On/Off - LED indicating lamp.
-
-
-
... More
Fully Automatic Diesel engine starting system complete with battery charger, 4 window annunciator, indicating lights, transformer, rectifier, timer, voltmeter ammeter, selector switches, push buttons, auxiliary relay etc. complete as required as per fire authority.
-
-
-
... More
All interconnecting power & control wires/cables suitable size within the panel and from panel to motors diesel engine, pressure switches, level switches, cable Tray, pipes etc. including brass glands termination within fire pump house and earthing as per specifications (Power cable size shall not be less than 1Nos. 3.5 x 95 mm sq., (3.5 x 50 Sqmm) for main pumps motor and 1 No. 4x16 mm sq for jockey pump motor.
1
-
-
... More
Slim seal dual plate type non-return valves (PN 1.6) complete with matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes.
-
-
-
... More
150 mm dia
2
-
-
... More
100 mm dia
-
-
-
... More
80 mm dia
1
-
-
... More
Slim seal Butterfly valves B 190 Class (PN1.6) complete with matching flanges rubber insertion, nuts. bolts and washer etc. of following sizes :
-
-
-
... More
80 mm dia
3
-
-
... More
100 mm dia
1
-
-
... More
150 mm dia
5
-
-
... More
200 mm dia
1
-
-
... More
Providing and fixing Ball valve with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete: in all respects.
-
-
-
... More
50 mm dia nominal bore
2
-
-
... More
Supply, fixing, testing and commissioning in position the following Y - STRAINER in Pump Suction Water line complete with flanges etc as per specifications & drawings.
-
-
-
... More
150 mm dia MS pipes
2
-
-
... More
100 mm dia MS pipes
1
-
-
... More
Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water up to 450C temperature working pressure 7kg and test pressure 14 kg/ cm2.
-
-
-
... More
80 mm dia
1
-
-
... More
100 mm dia
1
-
-
... More
150 mm dia
4
-
-
... More
Day Oil Tank (Rectangular)
-
-
-
... More
Double shell M.S. fabricated of IS:226 plate of 200 liters Capacity x 8mm thick. With inlet & outlet nozzles, Control Valve, Float Valve, Pipes, Flanges, Gaskets, bolts, nuts & internal supports.(The outer shall be having 110% capacity of the inner shell)
1
-
-
... More
Electrical Fault-isolation Modules to protect the system against wire to wire short circuits on loops, to be installed at the rate of every 3 nos. monitor modules complete as per manufacturer specifications and in an accessible location as per site, excluding wiring to Annunciation Panel, with UL/FM approval.
3
-
-
... More
Automatic electrically operated hooter of required db (min.40) capacity fire alarm, to be connected to the main fire panel and zonal sprinkler annunciation panel, complete in all respects as per requirements.
-
-
-
... More
a) For main fire panel at the main fire pump starter
1
-
-
... More
b) For sprinklers zonal panel at main sprinkler pump starter
1
-
-
... More
PORTABLE CHEMICAL FIRE EXTINGUISHERS
-
-
-
... More
Supply and fixing of ISI marked ( IS : 15683 ) ABC (Dry Powder) fire extinguishers cap 10 kg (9Kg) in seamless HP steel cylinders ISI marked and approved by CCE Nagpur fitted with pressure indicating gauge, internal tube squeeze level type valves fully charged with ABC powder and pressurized by Nitrogen complete in all respects including wall suspension bracket.
15
-
-
... More
Supply and fixing of ISI marked (IS:2878) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1m long & complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 filled to a filling ratio of not more than 0.667and wall suspension bracket.
-
-
-
... More
Capacity 4.5 Kg
2
-
-
... More
SH : XI : HVAC WORK
-
-
-
... More
HVAC SYSTEM SUPPLY:
-
-
-
... More
AIR COOLED DX SYSTEM :
-
-
-
... More
Supply and installation of copper refrigerant piping of required sizes duly insulated with closed cell elastomeric insulation thickness as specified by manufacturer,as per pipe size and cabling between indoor and outdoor complete with proper supports etc for following capacity unit. All related civil work such as making hole, chasing in wall, shall be inclusive in the quoted price.
-
-
-
... More
a) GROUND FLOOR
-
-
-
... More
1.0 TR WALL MOUNTED UNIT
10
-
-
... More
1.5 TR WALL MOUNTED UNIT
75
-
-
... More
2.0 TR WALL MOUNTED UNIT
210
-
-
... More
2.5 TR WALL MOUNTED UNIT
45
-
-
... More
b) FIRST FLOOR
-
-
-
... More
1.0 TR WALL MOUNTED UNIT
10
-
-
... More
1.5 TR WALL MOUNTED UNIT
75
-
-
... More
2.0 TR WALL MOUNTED UNIT
210
-
-
... More
2.5 TR WALL MOUNTED UNIT
45
-
-
... More
c) SECOND FLOOR
-
-
-
... More
1.0 TR WALL MOUNTED UNIT
20
-
-
... More
1.5 TR WALL MOUNTED UNIT
75
-
-
... More
2.0 TR WALL MOUNTED UNIT
190
-
-
... More
To supply, install, test and commission UPVC drain pipes duly insulated with 6 mm thick nitrile rubber and 'U ' traps from indoor units to nearest drain point.
-
-
-
... More
25 mm dia.
390
-
-
... More
50 mm dia.
85
-
-
... More
AIR DISTRIBUTION
-
-
-
... More
Supplying, installing, testing and commissing of direct driven PROPELLER FANS for exhaust air as shown in drawings. Each fan shall be complete with permanent split capacitor or shaded pole motor, mounting plate, accessories like guard, bird-screen & fixed louvers for weather protection as required. Fan selection arrangement and electrical characteristics shall be as follows.
-
-
-
... More
230 mm dia 1400 RPM fan suitable for 220 +(-)6% volts 50 cycles, 1 Phase AC supply
5
-
-
... More
300 mm dia 1400 RPM fan suitable for 220 +(-)6% volts 50 cycles, 1 Phase AC supply
3
-
-
... More
450 mm dia 1400 RPM fan suitable for 220 +(-)6% volts 50 cycles, 1 Phase AC supply
6
-
-
... More
AIR DISTRIBUTION SYSTEM
-
-
-
... More
DUCT
-
-
-
... More
Supply, fabrication, installation, and testing of site Fabricated ducts of following thickness including necessary supports flexible hangers with isolators, nut bolts, gasket, splitter damper,duct dampers, vanes, etc. complete as per specifications in accordance with the approved shop drawings.
-
-
-
... More
SITE FABRICATED DUCT
-
-
-
... More
24 gauge galvanised sheet (0.63 mm)
12
-
-
... More
GRILLE / DIFFUSER
-
-
-
... More
Supply, installation, testing and commissioning of terminal air distribution equipment as per approved shop drawings, colour and specifications.
-
-
-
... More
Aluminium powder coated air grille with damper for exhaust of 150 x 150mm
6
-
-
... More
SH : XII: PASSANGER ELEVATOR
-
-
-
... More
Providing & Fixing Passanger elevator as per specifications
-
-
-
... More
for thyssenkrupp Elevator (India) Pvt. Ltd.
2
-
-
... More
SH : XIII: ELECTRICAL & COMMUNICATION WORK
-
-
-
... More
CHAPTER-1 - W I R I N G
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group B
580
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
8
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1036
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
80
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
50
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2035
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
500
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
300
-
-
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
200
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
300
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
2 Pair
800
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
500
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
100
-
-
... More
25 mm
500
-
-
... More
32 mm
300
-
-
... More
40 mm
200
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
Telephone socket outlet
80
-
-
... More
TV antenna socket outlet
-
-
-
... More
Bell push
10
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
80
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
75
-
-
... More
3 Module (100mmX75mm)
30
-
-
... More
4 Module (125mmX75mm)
90
-
-
... More
6 Module (200mmX75mm)
80
-
-
... More
8 Module (125mmX125mm)
10
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
159
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required
100
-
-
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
-
-
-
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
500
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.
10
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
80
-
-
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
-
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm sweep
20
-
-
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
-
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
1750
-
-
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group B
270
-
-
... More
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
-
-
-
... More
CHAPTER-2-MCCB, MCB & DB’S
-
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
12 way , Double door
9
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral surface/ recess, complete with tinned copper bus bar, neutral including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
a) 4 way (4 + 12), Double door
1
-
-
... More
b) 6 way (4 + 18), Double door
12
-
-
... More
c) 8 way (4 + 24), Double door
1
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
a) Single pole
198
-
-
... More
b) Double pole
36
-
-
... More
c) Triple pole and neutral
11
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
10
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DBcomplete with connections, testing and commissioning etc. as required.
-
-
-
... More
a) 25 A
9
-
-
... More
b) 40 A
36
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150
mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
-
-
-
... More
a) For 4 way, Double door TPN MCB DB
1
-
-
... More
b) For 6 way, Double door TPN MCB DB
12
-
-
... More
c) For 8 way, Double door TPN MCB DB
1
-
-
... More
CHAPTER-4-CABLE TRAYS
-
-
-
... More
Hot Dipped Galvanized Iron Cable Tray
-
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
370
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
20
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
8
-
-
... More
CHAPTER - 5 - E A R T H I N G
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut,bolt, spring, washer excavation and re-filling etc. as required.
40
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
80
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
40
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
80
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
50
-
-
... More
CHAPTER 6 - LIGHTNING CONDUCTOR
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with
85 mm dia 6 mm thick G.I. base plate including holes etc.
complete as required.
2
-
-
... More
Fixing of lightning conductor finial (single prong) with base plate
including holes etc. complete as required.
2
-
-
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base
of the finial or any other metallic object) by riveting / nut
bolting/ sweating and soldering etc as required.
20
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
150
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or
surface of wall for lightning conductor complete as required.(For vertical run)
150
-
-
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick
G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
4
-
-
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
60
-
-
... More
CHAPTER 7 - MV CABLE LAYING
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
a) Upto 35 sq. mm
10
-
-
... More
b) Above 35 sq. mm and upto 95 sq. mm
10
-
-
... More
c) Above 95 sq. mm and upto 185 sq. mm
80
-
-
... More
CHAPTER 8-HT CABLE LAYING
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE
power cable of 11 KV grade of following size direct in ground
including excavation, sand cushioning, protective covering and
refilling the trench etc as required.
-
-
-
... More
Upto 120 sq. mm
80
-
-
... More
CHAPTER 9-MV CABLE JOINTING & END TERMINATION
-
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
a) 3½ X 35 sq. mm (32mm)
4
-
-
... More
b) 3½ X 50 sq. mm (35mm)
4
-
-
... More
c) 3½ X 70 sq. mm (38mm)
4
-
-
... More
d) 3½ X 185 sq. mm (57mm)
4
-
-
... More
CHAPTER-10- FIRE DETECTION AND ALARM SYSTEM
-
-
-
... More
INTELLIGENT FIRE ALARM SYSTEM
-
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
-
-
-
... More
a) Two Loop Panel.
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
125
-
-
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
10
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
10
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
10
-
-
... More
PUBLIC ADDRESS SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
30
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
1
-
-
... More
CABLING & WIRING
-
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
800
-
-
... More
speaker cable Single pair, 2-core, 1.5 sqmm
250
-
-
... More
NON DSR ITEMS
-
-
-
... More
Fixture
-
-
-
... More
Supply of below mentioned Items-
-
-
-
... More
a) 36 Watt Square LED Natural Light
140
-
-
... More
b) 12 Watt LED Light
354
-
-
... More
c) 1200 MM Ceiling Fan
80
-
-
... More
d) 225mm Exaust fan
10
-
-
... More
e) Data Socket(RJ-45 CAT6) (Legrand Myrius)
85
-
-
... More
Make:
-
-
-
... More
Light- Philips
-
-
-
... More
Fan -Havells
-
-
-
... More
Supply of HT/ LT CABLES
-
-
-
... More
Supply of following 1100 volt grade XLPE insulated PVC inner sheathed and FR PVC outer sheathed Aluminium conductor armoured LT cables .(Make: Cable- Gupta Power, Polycab, RR Kabel, Havells )
-
-
-
... More
3.1/2 core 185 sq. mm.
120
-
-
... More
3.1/2 core 70 sq.mm
80
-
-
... More
3.1/2 core 50 sq.mm
40
-
-
... More
3.1/2 core 35 sq. mm
40
-
-
... More
Supply of LT PANEL
-
-
-
... More
(Make: L & T)
-
-
-
... More
MAIN LT PANEL with AMF
-
-
-
... More
INCOMER
-
-
-
... More
400A, FP, MCCB ,36 KA (2 Nos.)
-
-
-
... More
METERING & INDICATION with each incomer
-
-
-
... More
- ON/OFF phase indicating lamps with control fuses .
-
-
-
... More
- Multifunction Meter with CT's
-
-
-
... More
BUS BAR
-
-
-
... More
'800 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves
-
-
-
... More
OUTGOINGS
-
-
-
... More
100 A, FP, MCCB, 16 Ka – 12 Nos
-
-
-
... More
63 A, FP, MCCB, 16 Ka – 2 Nos
-
-
-
... More
63 A, FP, MCB–2 Nos
-
-
-
... More
All MCCB's should with Extended Rotary Handle and Spreader terminals
-
-
-
... More
Cable Entry from Top.
-
-
-
... More
Supply of Building LT PANEL - as described above
1
-
-
... More
Supply installation Testing and commissioning of 120 KVAr with 6 stage relay
1
-
-
... More
Supply of UPS
-
-
-
... More
Supply installation Testing and commissioning of .......... KVA on line UPS system as per IEC 62040-I(Safety) ,IEC 62040-3(Performance) for critical IT solutions ,fully digital IGBT Converter and Inverter ,with Internal /External isolation transformer from DC to AC, PWM, pure sine wave out put, double conversion ,output pf 0.9, with parallelling facility , standard communicaton features/options auto and manual static by pass switch three phase input / Three phase output. Accoustic level shall be less than 58dB at 1 mtr distance.
Makes: Numeric/APC/Consul Neowatt/Sakshham /Emerson
-
-
-
... More
20.0 KVA 312/360 V DC
1
-
-
... More
Supply of Transformer
-
-
-
... More
Supply, Installation, Testing and commissioning of copper wound Transformers 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories with off load tap changer (+5% to -10% in steps of 2.5%), winding / Top --- temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 KV as per energy efficiency level - 2 at basic Insulation level conferming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014.
-
-
-
... More
250 KVA
1
-
-
... More
Supply of DG
-
-
-
... More
SITC of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.Alternator shall be self regulated with standard Alternator Protection( Over voltage, over speed & under voltage). Engine shall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank ( with Stand) & piping, control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having microprocessor based genset monitoring and control system mccb Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level is less than 75 db (A) at a distance of 1 Mtrs. duly certified by authorized agency. Complete in all respect of following capacity : Radiator cooled and turbo charged ( AMF include in the LT panel)
-
-
-
... More
250 KVA at 0.8 pf 415V 50Hz 3-Ø
1
-
-
... More
Two Pole Structure
-
-
-
... More
Supply & Installation of D.P. Structure With AIR BREAK SWITCH having following specifications:
-
-
-
... More
DP :double pole structure on 2no ISMB 125mm 10 mtr high pole or 2no PCC pole 10 mtr high using 7 no MS channel each of size 75mmx50mmx2500mm complete in all respect with nuts, springs ashers, clamps as required
-
-
-
... More
GO:Off load type gang operated 3-pole vertical flute type switch suitable for 11KV ; 400A ,3-ø, central post rotating double break isolator complete with MS hardware , copper moving & fixed contact ,assembly of 9nos pin insulator ,GI pipe of suitable length for operation.
-
-
-
... More
DO: 3nos Vertical / Horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pin insulators
-
-
-
... More
LA:3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv oh linewith rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc as required.
-
-
-
... More
JUMPERS: 3 no 11kv acsr conductors mounted on pin type insularors as required. 6.GENERAL:The go shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’
1
-
-
... More
(SH-XIV:- Boundary wall ) Details of cost for 320.00 Mtr.
-
-
-
... More
Earth work in excavation in foundation and trenches in soils containing 50% ormore of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
130.9
-
-
... More
Providing and laying in foundations and plinth cement concrete 1 : 4 : 8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
20.04
-
-
... More
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
-
-
-
... More
a) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.
15.25
-
-
... More
Reinforcement cement concrete work in columns, pillars,piers,abutments, post and struts etc upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
-
-
-
... More
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)
28.47
-
-
... More
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar1:3 (1cement:3finesand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
-
-
-
... More
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
25.07
-
-
... More
Centring and shuttering including strutting, propping etc and removal of form work for
-
-
-
... More
a) Lintels, beams, girders, bressumers and cantilevers etc.
1548.39
-
-
... More
b) Column, pillars, posts and struts etc.
366.37
-
-
... More
Reinforcement of RCC work including bending, binding and placing in position complete.
-
-
-
... More
b) Tar/TMT steel
4124.92
-
-
... More
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
371.38
-
-
... More
Extra for half brick masonary in superstructure above floor two level.
371.38
-
-
... More
Providing and fixing MS grills of required pattern in wooden frames of windows etc. With MS flat, square or round bars with round headed bolts and nuts or by screws.
-
-
-
... More
a) Plain grill
2000.12
-
-
... More
12 mm cement plaster 1 : 6 (1 cement : 6 fine sand).
824.29
-
-
... More
Colour washing such as green, blue or buff on new work (two or more coats) including a base coat of white washing with lime to give an even shade
1089.99
-
-
... More
SH- XV:- STEEL GATE AND CATTLE TRAP
-
-
-
... More
Earth work in excavation in foundation and trenches in soils containing 50% ormore of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.
23
-
-
... More
Providing and laying in foundations and plinth cement concrete 1 : 4 : 8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
4
-
-
... More
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
-
-
-
... More
a) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.
4
-
-
... More
Reinforcement cement concrete work in columns, pillars,piers,abutments, post and struts etc upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
-
-
-
... More
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)
2
-
-
... More
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar1:3 (1cement:3finesand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
-
-
-
... More
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
1
-
-
... More
Centring and shuttering including strutting, propping etc and removal of form work for
-
-
-
... More
a) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.
29
-
-
... More
b) Lintels, beams, girders, bressumers and cantilevers etc.
20
-
-
... More
c) Column, pillars, posts and struts etc.
20
-
-
... More
Reinforcement of RCC work including bending, binding and placing in position complete.
-
-
-
... More
b) Tar/TMT steel
249
-
-
... More
Providing and fixing MS Gate / grills of required pattern with MS flat, square or round barswith roundheaded boltsand nuts or by screws. MS Steel Gate and Cattle Trap (3.50M wide)
1364
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements