Public Works Department Tender
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date10 Jan 2023
Closing Date23 Jan 2023
Tender Amount₹ 4,75,22,382
Costs
EMD
₹ 4,75,300Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PWDAP_1014_1Bid Award Id
ViewTender No
YA/NIT/EDN/2022-23/10Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://www.arunachalpwd.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying in foundations and plinth cement concrete 1:3:6(1 cement : 3 coarse sand :68 graded stone aggregate 20mm nominal size) excluding the cost of centering and shuttering.
(b) For walls
67.1
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Cold twisted bars.
55707.79
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
301.7
-
-
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
288.4
-
-
c) Column, pillars, posts and struts etc.
360
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
1050.4
-
-
e) Stairs (excluding landings) except spiral stair cases.
18.4
-
-
f) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
739.6
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
101.9
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
38.7
-
-
Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5 mm nominal size).
84.6
-
-
Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement.
27.1
-
-
Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
84.6
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
116.2
-
-
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
556.9
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
123.6
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
3
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
113
-
-
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
2.9
-
-
Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth.
149.7
-
-
Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level.
149.7
-
-
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
180
-
-
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
34
-
-
Providing and fixing T-iron frames for doors, windows and ventilators of MS Tee sections joints mitred and welded with 15 x 3 mm legs, 10 cm long embedded in cement concrete block 15 cm x 10 cm x 10 cm size of 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or bolt and nuts as required, including fixing of necessary butt hinges and screws and applying a priming coat of approved primer.
520
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.
(a) 38 mm thick best available local wood, class - B I
34.8
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard olled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
3340
-
-
Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately
1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
86.4
-
-
Providing and fixing glazing in aluminium door,window,ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)
(a) flaot glass panes of 4,00mm thickness
14.4
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
4.0 mm thick glass panes
75.6
-
-
WC / Bathroom and other Door frames:- Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
39.6
-
-
WC / Bathroom and other Door Shutter:- 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For WC and bathroom door shutter).
12.6
-
-
Providing and fixing 12 mm thick and 150 mm wide pelmet of flat pressed 3 layer particle board (medium density) with 25 mm dia second class teak wood curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete
10.9
-
-
12 mm thick cement plaster 1: 3( 1 cement : 4 coarse sand) on walls.
1730.9
-
-
15 mm cement plaster in 1:3 (1 cement :3 fine sand) cement mortor
172.4
-
-
Extra for plastering on circular work not exceeding 6 m in radius.
8.9
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
b) Size of Tile 600x600 mm
194
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
b) Size of Tile 600x600 mm
18.7
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the oints with white cement and matching pigments etc., complete.
67.6
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
155.8
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
(a) 25 mm thick
293.3
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
37.3
-
-
50 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
290
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
2346.5
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
5
-
-
Providing and fixing Aluminium handles with necessary screws etc. complete.
a) 125 mm
44
-
-
b) 100 mm
50
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
44
-
-
Providing and fixing Aluminium tower bolt( barrel type) with necessary screws etc. complete.
a) 250x10 mm
44
-
-
Providing and fixing MS Hooks and Eyes.
a) 300 x 16 mm
68
-
-
Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.
a) 300 x 16 mm
22
-
-
Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
(b) Orissa Pattern WC Pan
6
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
WC pan with white plastic seat and lid.
2
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
8
-
-
Providing and fixing 100 mm sand cast iron grating for gully, floor.
8
-
-
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass
8
-
-
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. screws and washers
8
-
-
Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).
a) 750 x 20 mm size
16
-
-
Providing fixing of electric Geyser
2
-
-
Providing and fixing C.P. Wall mixer 3 in 1
2
-
-
Providing and fixing toilet paper holder :
C.P. brass
6
-
-
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.
300 mm. dia. RCC Pipes
45.76
-
-
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 Coarse sand:6 graded stone aggregate 20 mm nomina; size over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and considered and grouted with fine sand including finishing top smooth.
134.1
-
-
Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.
191.5
-
-
Providing laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement in the proporation of 1:1(1 cement :1fine sand ) including testing of joints etc. complete.
a) 100 mm dia
27
-
-
b) 150mm dia
52
-
-
Providing and laying cement concrete 1:5:10 (1 cement :5 coarse sand : 10 grade stone aggregate 40 mm nominal size) all-round S.W pipes including bed concrete as per standred design.
a) 100 mm dia
27
-
-
b) 150mm dia
52
-
-
Providing and fixing sand cast iron heel rest sanitary bend
a) 100 mm dia
16
-
-
Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
(a) 100 x 100 x 100 mm
16
-
-
Providing and fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet- centrifugally Cast (spun) iron S&S
16
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (external work).
25 mm dia nominal bore
50.4
-
-
50 mm dia nominal bore
90
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
20 mm nominal outer dia Pipes
264
-
-
Painting GI pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.
25 mm dia nominal bore
50.4
-
-
50 mm dia nominal bore
60
-
-
Providing and placing on terrace ( at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
-
-
Providing and fixing CP brass bib cock of approved quality conforming to IS : 8931
15 mm Nominal bore
8
-
-
Providing and fixing CP brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931
15 mm Nominal bore
8
-
-
Providing and fixing CP brass angle valve for basin mixer and gyser points of approved quality conforming to IS : 8931
15 mm Nominal bore
2
-
-
Constructing brick masnory manhole with 2nd class bricks in cement mortar 1:5 (1 cement :5 fine sand ) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 stone single 20mm nomunal size)foundation concrete 1:4:8 mix (1 cement :4 coarse sand : 8 stone aggregate :40 mm nominal size )inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand ;4 stone aggregate 20mm nominal size) neatly finished complete as per standard design.
(a) Inside size 90x80 cm and 45cm deep including CI cover with frame (light duty ) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 kg and weight of frame 15 kg), cement concrete 1:4:8
9
-
-
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
1
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type-A, including jointing with seal ring conforing to IS:5382, leaving 10mm gap for thermal expansion, (i) Single Socketed pipes. 110mm
70
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length
100 mm diameter
84
-
-
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion. 110 mm diameter a) Single tee with door
14
-
-
b) Bend 87.5°
14
-
-
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
3226.9
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
69.6
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
215.56
-
-
SH:- FIRST FLOOR
-
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Cold twisted bars.
38755.2
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Column, pillars, posts and struts etc.
243.9
-
-
b) Lintels, beams, girders, bressumers and cantilevers etc.
369.1
-
-
c) Stairs (excluding landings) except spiral stair cases.
18.4
-
-
d) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
918.96
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
41.7
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
42.4
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
3
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
139.9
-
-
Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20 (1 cement : 1.5 Coarse Sand : 3 stone aggregate 20 mm nominal size).
3.1
-
-
Masonry with pre-cast cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone shingle 20 mm nominal size) blocks in cement mortar 1 : 3 (1 cement : 3 fine sand) in foundations and plinth.
147.9
-
-
Extra for pre-cast cement concrete block masonry in superstructure above plinth level up to floor two level.
147.9
-
-
Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
190
-
-
Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
32
-
-
Providing and fixing T-iron frames for doors, windows and ventilators of MS Tee sections joints mitred and welded with 15 x 3 mm legs, 10 cm long embedded in cement concrete block 15 cm x 10 cm x 10 cm size of 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or bolt and nuts as required, including fixing of necessary butt hinges and screws and applying a priming coat of approved primer.
315
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.
(a) 38 mm thick best available local wood, class - B I
18.9
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard olled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
3720
-
-
Providing and fixing aluminium work for doors,window,ventilators and partions with extruded built up standard tubular sections/approximate Z sections and other section of approved make conforming to IS 733 and 1285,fixed with raw plugs and srews or with fixing clips or with expansion hold fasters including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rust free,straight,miltred and jointed mechanically whenever required including cleat,angle,Aluminium snaps beading for glazing/panelling CP brass/ stainless steel screws, all complete as per architech drwing and the direction of Engineer incharge, glazing and panneling to be paid for separately
1.3:- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
172.8
-
-
Providing and fixing glazing in aluminium door,window,ventilator shutters and partions etc with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of engineer in charge (Cost of alumunium snap beading shall be paid in basic item)
(a) flaot glass panes of 4,00mm thickness
28.8
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
4.0 mm thick glass panes
79.2
-
-
WC / Bathroom and other Door frames:- Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
29.7
-
-
WC / Bathroom and other Door Shutter:- 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For WC and bathroom door shutter).
9.45
-
-
12 mm thick cement plaster 1: 3( 1 cement : 4 coarse sand) on walls.
1680.46
-
-
Extra for plastering on circular work not exceeding 6 m in radius.
8.9
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the oints with white cement and matching pigments etc., complete.
58.7
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
138
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
(a) 25mm thick
189.1
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
33.6
-
-
50 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
490.3
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
2346.5
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
9
-
-
Providing and fixing Aluminium handles with necessary screws etc. complete.
(a) 125mm
30
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
30
-
-
Providing and fixing Aluminium tower bolt( barrel type) with necessary screws etc. complete.
(a) 250x10 mm
30
-
-
Providing and fixing MS Hooks and Eyes.
(a) 300 x 16 mm
76
-
-
Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.
(a) 300 x 16 mm
30
-
-
Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.
(b) Orissa Pattern WC Pan
6
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
6
-
-
Providing and fixing Labouratory sink including making all connection excluding cost of fittings.
2
-
-
Providing and fixing 100 mm sand cast iron grating for gully, floor.
8
-
-
Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass
8
-
-
Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. screws and washers
8
-
-
Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).
a) 750 x 20 mm size
16
-
-
Providing and fixing toilet paper holder :
C.P. brass
6
-
-
Providing and fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet- centrifugally Cast (spun) iron S&S
16
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (external work).
25 mm dia nominal bore
199.2
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
20 mm nominal outer dia Pipes
496
-
-
Painting GI pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.
25 mm dia nominal bore
199.2
-
-
Providing and placing on terrace ( at all floor levels ) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
-
-
Providing and fixing CP brass bib cock of approved quality conforming to IS : 8931
15 mm Nominal bore
6
-
-
Providing and fixing CP brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931
15 mm Nominal bore
6
-
-
Providing and fixing CP brass angle valve for basin mixer and gyser points of approved quality conforming to IS : 8931
15 mm Nominal bore
2
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type-A, including jointing with seal ring conforing to IS:5382, leaving 10mm gap for thermal expansion, (i) Single Socketed pipes. 110mm
50.4
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length
100 mm diameter
84
-
-
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion. 110 mm diameter a) Single tee with door
14
-
-
b) Bend 87.5°
14
-
-
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
3235.7
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
37.8
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
217.62
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements