Pradhan Mantri Gram Sadak Yojana Tender

Construction of Job pillars as per Fig.1600.1(d) as per drawing and Technical Specification Clause 1602.4

Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2.

Earth work in excavation for structure as per drawing and technical specification clause 305.1 including setting out,construction of shoring and bracing ,removal of stumps and other deliteriouses material and deposal upto a lead of 50m,dressing of side . Ordinary soil upto 3m depth

Earthen Shoulder Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as

Granular Sub-base with Well Graded Material (Table 400.1) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. For Grading I Material

WBM Grade-III Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN in static roller in stages to proper grade and camber, applying and brooming, crushable screening to fillup the intersties of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405 By Manual Means

Prime Coat (Medium porosity) Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface granular base i/c cleaning of road surface and spraying primer @ 0.70 - 1.00 kg/sqm using mechanical means as per technical specification clause 502.80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. Case-I : BY Manual means Bitumen (S-90)

Tack Coat Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor @ 0.20 to 0.25 kg/sqm on the prepared bituminus surface cleaned with hydraulic broom as per technical specification clause 503. Case-I, Type A (i) Bitumen (S-90)

20 mm thick open graded primix carpet using bitumineous binder. Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.

Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510

Providing concrete for plain/reinforced concrete in open foundations as drawing and technical specifications clause 802,803,1202 and 1203.(M-10,1:3:6)

Coursed Rubble Masonry (Second sort) with hard stone in foundation and plinth in cement mortar 1:4

Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and technical specification Clauses 615, 710 and 1204.3.11

Back filing behind the Abutment, wing wall and return wall complete as per drawing and technical specifications ,clause 1204.3.8 Granular materials

Construction of CRM side drain 15cm thick both side wall height 0.32cm in 1:4 CM with hardstone, cc base in M10(cc 1:3:6) 15cm thick i/c inside pointing in cement morter 1:4 i/c earthwork complete as per drawing and direction of engineer incharge.

Providing and fixing typical PMGSY informatory sign board with logo as per MoRD specification and drawing. Three MS plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 25mm x 5mm. The iron frame of the lower most plate and flat iron frame will be welded welded to 2 nos 75mm x 75mm of 12 SWG sheet tubes posts duly embeded in cement concrete M15 grade blocks of 450mm x450mm x600mm, 600mm below ground level. The topmost diomond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plates tube. All MS will be stove enameled on both sides. lettering and printing arrows, border etc will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed post and steel tubes will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1. a) Informatory board

b) Citizen information Maintenance board

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MoRD for Rural Roads of required shade and colour supported and welded on 47mmx47mmx12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M15 grade concrete 450x450x600mm,600mm below ground level as per approved clause 1701.2.2 a) Traffic signs ( cautionery signs etc.)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 Bench Mark Stone

T B M Stone

200 mtr stone

SH:- 5 - Years Maintenance

First Year Maintenance

Second Year Maintenance

Third Year Maintenance

Fourth Year Maintenance

Fifth Year Maintenance