Pradhan Mantri Gram Sadak Yojana Tender

Construction of reference pillars as per Fig 1600.1 (b) as per drawing and techinical specification Clause1602.1

Construction of job pillars as per Fig 1600.1 (d) as per drawing and techinical specification Clause1602.4

SH: EARTHWORK IN ROAD FORMATION { Formation cutting }

EARTHWORK IN HILLY ROAD-FC Excavation in all kinds of soil,ordinary rock and hard rock ( requiring blasting including cutting and trimming of slopes as per specification and deposal cut materilas with a lift upto 1.5 mtr and lead upto 20mtr as per Clause 1603.1 and 1603.2

SH : EARTHEN DRAIN

Construction of unlined surface drain of avareage cross-sectional area 0.40sqm in all kinds soil to specified line,grade,levels and dimensions excavated materials to be used in embankment with a lift of 3m and lead of 50m(Avarage lead 25m) as per technical specifications.

SH: CD,Protection and Minor Bridges

Earth work in excavation for structure as per drawing and technical specification clause 305.1 in all kinds of soil, ordinary rock,hard rock ( requiring blasting)-( blasting prohibited) and marshy soil including setting out,construction of shoring and bracing ,removal of stumps and other deliteriouses material and deposal upto a lead of 50m,dressing of side and bottom and back filling in trenches with excavated suitable materials.

Providing concrete for plain/reinforced concrete in open foundations as drawing and technical specifications clause 802,803,1202 and 1203. PCC grade M15 1:2.5:5 ( Hand mixing).

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Coursed Rubble masonry ( 1st sort ) In 1:4 cement mortar

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Coursed Rubble masonry ( 2nd sort ) In 1:5 cement mortar

Providing and laying reinforced cement concrete in super structure as per drawing and specification clause -800 , 1205.4 & 1205.5 ( RCC M25).

Providing and laying reinforced cement concrete in superstructure as per Drg. and technical specification clauses 800,1205.4,1205.5 For nominal mix 1:2:4(Hand mixing)

Supplying fitting and placing HYSD bar reinforcement(Fe415) in superstructure complete as per drawing and technical specification.Clause -1002,1010 &1202 (as per RRM plate No. 7.08)

Back filing behind the Abutment, wing wall and return wall complete as per drawing and technical specifications ,clause 1204.3.8 Granular materials

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

I). P.C.C grade M 10

(I) Nominal mix 1:3:6

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204

For height upto 5 m.

III) R.C.C. grade M 20

Drainage spouts complete as per drawing and technical specification clause 1209.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204

For height upto 5 m.

III) R.C.C. grade M 20

Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and technical specification Clauses 615, 710 and 1204.3.11

Providing and laying of an elastometri slab expansion joint complete as per approved drawing and approved specification to be installed by manufacture/supplier or their authorised representative ensuring compliance to the manufacture's.

Providing and laying wire created boulder structures boulder size 22.5 cm to 45 cm having 25 kg average weight for each i/c dumping /laying in SWG wire mesh of 10 cm x 10 cm (woven diagonally) 4 mm dia i/c lying properly the mesh by cutting the mouth and

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing .Three MS plates of 1.6mm thk.top and middle plate duly welded with MS flat iron 25mmx5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm.The angle iron frame of the lower most plate and flate iron frame of middle plate will be welded to 2nos.75mmx75mmof 12 swg sheet tubes posts duly embedded in c.c M-15 grade blocks of 450mmx450mmx600mm,600mmbelow ground level.The top most diamond plate will be welded to middle plate by 47mmx47mm of 12 swg steel plate tube . All M.S will be stove enameled on both sides.Lettering and printing arrows,borders etc will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All section of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per Drg.clause 1701 and 1700.1

Kilometre stone : Reinforcement cement concrete M15 grade kilometre stone/local stone of standard design as per IRC -8 fixing in position including painting etc as per drawing and technical specification Clause 1703

5th Kilometere stone precast

Ordinary Kilometre stone (precast)

Providing and fixing traffic signs for limited period at suitable location in construction zone comprising of warning zone approved transition zone…..

men at work

Diversion

Road closed

stop

slow