Military Engineer Services Tender

M&L for PCC1:3:6, Type B-2 (40 mm graded stone aggrregate) cement tetaining walls, any thickness, size or shape including Pilasters,buttresses columns. Pillars coundary pillars and posts (includings ccaps and bases)

Rendering 15mm thick on fair faces of brick work or concrete surface in cement plaster 1:4 finished even and smooth without using exstra cement completed all as specified and directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete wall, floors and roofs ans sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20cm wide.(Where RCC/PCC band in walls, spanning and opening , for flat surcace complete all as specified and directed.

Supply and Laying and connecting with appropriate lugs in replacement XLPE LT cable PVC insulated, size 10 Sqmm 2 Core. heavy duty electric cables with Aluminum conductors,1100 volts grade, laid in trenches/on pole/in pipe /on wall ,using suitable clamps for fixing of cable complete all as specified and directed of following cross-sectional area including removing/ taking down of old unserviceable cables :-

All as per above item No-7 but size 16 Sqmm 2 Core.

All as per above item No-7 but size 25 Sqmm 2 Core.

All as per above item No-7 but size 35 Sqmm 3.5 Core.

All as per above item No-7 but size 50 Sqmm 3.5 Core.

All as per above item No-7 but size 70 Sqmm 3.5 Core.

Excavation in trenches, n exc 1.5m wide and m exc 1.5m in depth, for foundation, etc or for shafts, wells, cess-pits, menholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out for soft/loose soil.

Returning, filling in, including spreading, levelling, waterring and wall ramming in layers not exc 25 cm. for hard/dense soil.

Removing excavated material n exc. 50 m and depositing where directed at a layers not exc 25 cm. for hard/dense soil.

S&F Double walled corrugated (DWC) Pipe conforming to IS 14930(Part-II) Pipes of Outer dia 50 mm and innder dia 38mm all as specified and as directed.

S&F 3- layer PP-R Polypropylene random copolymer) concealed pipes 63 MM outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches all as specified and directed.

S&F 3- layer PP-R Polypropylene random copolymer) concealed pipes 40 MM outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches.

M&L for Making connection of PP-R distribution branch 50 to 75 mm with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc

S&F PP-R Gate valves (brass insert) 63 mm as per requirement of the site

S&F PP-R Gate valves (brass insert) 40 mm as per requirement of the site

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 5000 Ltr capacity hoisted and fixed in position all as specified and directed

S&F Ball valves high pressure of PTMT 40 mm bore with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight - 690 gms)

S&F PVC Junction box sheet moulding compound type (SMC) off white colour with hinged type door of size 250 x 200 x 100mm (internal) comprising bakelite 16 sqmm size terminal block 4 ways-1 No, MCB SPN - 01 No housed inside junction box with neutral bus bar, internally wired, complete fixed on pole with suitable MS clamps bolts nuts and washers including taking out old junction box all as specified and as directed.Make:-Sintex/Prayag/Indoasian

M & L for cable route marker with route indication on cast iron disc of 100mm dia and 10mm thick, marked / written for "LT CABLE 1100 VOLTS" embosed including indicating direction fixed / bolted to 40mmx40mmx6mm thick MS angle iron support of 0.5m long embedded upto 200mm depth in concrete block of size 200mm x 200mm x 500mm of mix PCC 1:3:6, type C-1 including painting with two coats of synthetic enamel paint over a coat of red oxide primer to exposed steel surfaces complete all as specified and directed.

Supply and fixing in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including removing of old unserviceable street light complete.

S&F in pvc coduit Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required for 2x2.5sq mm+1x2.5sq mm earth wire including removing of old wiring all as specified.

S&F Double walled corrugated (DWC) Pipe conforming to IS 14930(Part-II) Pipes of Outer dia 63 mm and innder dia 50mm all as specified and as directed.

Supply, installation, commissioning and testing in replacement powder coated factory made out door type double door panel board confirming to IP 66 protaction, of suitable size made of Robust steel sheet construction made from min 3.15 mm steel sheet with countersunk holes at bottom for base mounting brackets and sheet steel gland plates for cable entry, formed gasket arround doors, with provision of Lock inserts, earthing straps, door stay and grouted in ground by using angle iron frame of size 50mm x 50mm x 6mm, pedastal type and provided with four nos of angle iron supports duly embedded in foundation using PCC (1:2:4) type C-1 with 20mm graded stone aggregate. The panel will be prewired with suitable size PVC insulated copper conductor cable, multistranded housed with the following accessories:- (a) Al bus bar of suitable capacity for phase and neutral. (b) MCCB 4 pole 250 Amp 36 KA alongwith Spreader terminals with adjustable thermal setting – 01 Nos (Incomming) (c) MCCB 4 pole 125 Amp 25 KA alongwith Spreader terminals with adjustable thermal setting – 04 Nos (Out going) (d) Digital volt meter 0 to 500 volt with selector switch – 01 Nos (e) Digital Amp meter 0 to 500 Amp with CT of suitable ratio and selector switch – 01 Nos (f) Phase indicator lamp RYB-01 Set

Supply, installation, commissioning and testing in replacement powder coated factory made out door type double door Feeder panel board confirming to IP 66 protaction, of suitable size made of Robust steel sheet construction made from min 3.15 mm steel sheet with countersunk holes at bottom for base mounting brackets and sheet steel gland plates for cable entry, formed gasket arround doors, with provision of Lock inserts, earthing straps, door stay and grouted in ground by using angle iron frame of size 50mm x 50mm x 6mm, pedastal type and provided with four nos of angle iron supports duly embedded in foundation using PCC (1:2:4) type C-1 with 20mm graded stone aggregate. The panel will be prewired with suitable size PVC insulated copper conductor cable, multistranded housed with the following accessories:- (a) Al bus bar of suitable capacity for phase and neutral. (b) MCCB 4 pole 125 Amp 25 KA alongwith Spreader terminals with adjustable thermal setting – 01 Nos (Incoming) (c) MCCB 4 pole 100 Amp 16 KA alongwith Spreader terminals with adjustable thermal setting – 01 Nos (Outgoing) d) Digital volt meter 0 to 500 volt with selector switch – 01 Nos (e) Digital Amp meter 0 to 500 Amp with CT of suitable ratio and selector switch – 01 Nos (f) Phase indicator lamp RYB-01 Set

M&L for earthing complete with galvanised steel earth plate electrode 60cmX60cmX6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level)with top edge of the plate not less than 1.5 metres below normal groundlevel, connected to galvanised earth lead strip 32x6mm by means of volts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm bore GI medium grade earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of earth pit reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer,charcoal and testing on completion all as specified and directed..