Indian Army Tender

CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold,Ambuja,Ultratech,ACC,JK,Dalmiya under Job No 2506 Svl PD with OHP as per store list , Stone boulder 9 inch to 12 inch , Coarse Aggregate 40 to 63mm , Coarse sand free from vegetation , Coarse Aggregate 20mm graded , Coarse Aggregate 40mm graded , Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make-Tata,Sail,JSW , Water proofing compund conforming to IS 2645-2003 Make- Pidilite,Dr Fixit,Fevicol , PBS Roll 20m Long , Width of 0.9Mtr ISI Marked with Min weight of 34 Kgs oblique Roll , GI binding wire TATA,Sail,JSW , Cement based paint Snowcem Make-Berger,Asian,Nerolac , Slack lime , Painting brush 4 inch ISI Marked , HDPE sand Bags khaki colour of size 30 inch x 15 inch inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms oblique Bag , Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 Make-Asian,Berger,Neroloc , Synthetic paint enamelled OG conforming to IS 5-2004 Make-Asian,Berger,Nerolac , Thinner. Make- Nerolac,Berger,Asian , SRT 2440 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make-TATA, SAIL,JSW , SRT 1840 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make-TATA, SAIL,JSW , ISMB hot rolled 200x100mm and 4 mtr long Make-TATA,SAIL,JSW , Prefeb mild steel door of size 750x 1800mm double shutter, outer frame made out of ISA 40x 40x6mm and door shutter frame Make-Tata,Sail,JSW as per store list , Loop Holes 780 x 300 mm Make-TATA,SAIL,JSW , Loop Holes 1000 x 300 mm Make-TATA, SAIL,JSW , Loop Holes 1250 x 300 mm Make-TATA,SAIL,JSW , Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm for shutter frame with blace sheet Make-TATA, SAIL,JSW as per store list att , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Wooden scantling various size , Nails various size , Air terminal single pointed aluminium rod 12mm dia and 300mm long. , Testing point terminal block make of Gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw. , Aluminium strips 25x3mm. , Galvanised iron strip 32x6mm. , Funnel fitted with 20mm dia GI Pipe 1.5m long Make Jindal,Tata, Kalinga , Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings, drilled with two nos holes for 6 mm dia near one side. , CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame. , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make-Presto,Polycab, Finolex. , Charcoal , Salt