Indian Army Tender

CATEGORY: Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold,Ambuja,Ultratech,ACC,JK or Dalmiya under Job No 2502 MMG BKR as per store list , Stone Boulder 9 inch to 12 inch , Coarse aggregate 40-63 mm graded , Coarse sand free from vegetation , Coarse aggregate 20mm graded , Coarse aggregate 40 mm graded , Water Proofing compound confirming to IS 2645-2003 Make-Pidilite,Dr fixit, Fevicol , PBS Roll 20m Long , Width of 0.9 Mtr ISI Marked with Min weight of 34 Kgs oblique Roll , Cement based paint Snowcem Make-Berger,Asian,Nerolac , Synthetic Paint enamelled OG confirming to IS 5-2004 Make- Berger,Asian,Nerolac , Synthetic Paint enamelled Brown confirming to IS 5-2004 Make-Berger,Asian,Nerolac , Anti corrosive red oxide zinc chromate primer confirming to IS 5- 2004 Make-Berger,Asian,Nerolac , Loop Holes 1000 x 300 mm Make-TATA,SAIL,JSW , Ventilator Steel 300 x450 mm wiil be fabricated using ISA 35x35x5mm for outer frame and ISA 30x30x3mm for shutter frame with blace sheet Make- TATA, SAIL,JSW as per store list att , MS binding wire TATA, SAIL,JSW , ISMB hot rolled MS 125, 4000mm long Make- TATA,SAIL,JSW , ISMB hot rolled MS 125, 1200mm long Make-TATA, SAIL,JSW , SRT 1840 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make-TATA,SAIL,JSW , Prefab mild steel door of size 900x1700, outer frame made out of ISA 40x40x6mm and door shutter frmae of ISA 35x35x5mm and all stiffner ISA 30x30x3mm. Steel shall conform to IS-800 Make- TATA,SAIL,JSW , HDPE sand bag OG colour of size 34 inch x 14 inch , Mild Steel Bars of size 6 to 8mm dia conforming to IS 432 Part I 1982 Make-TATA,SAIL,JSW , Preferb folding double sleeping sleeping bunks made of MS columns 65x65x6 mm and ms plate from made of ISA 40x40x6mm, hold fast Make-Tata,Sail,Jsw as per store list attached , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Wooden Scantling various sizes , Nails various size , Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side , Air termination single pointed aluminium rod 12 mm dia and 300 mm long , GI pipe 40 mm dia light grade Make-Jindal,Tata,Kalinga , GI pipe 20 mm dia light grade Make-Jindal,Tata, Kalinga , Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make-Presto,Polycab,Finolex , Testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw , Aluminium strips 25 x 3.0 mm , Nut and bolts 6 mm dia 30mm long with check nut and washer , Charcoal , Salt Normal , CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long Pipe Make-Jindal,Tata,Kalinga , Galvanized Iron strip 32 x 6 mm