Border Roads Organisation Tender

Group 4 , Information Sign board size of 900 mm x 600 mm made of Retro Reflective Sheeting as per IRC 67 2022 made on 3mm thick Aluminium Composite panel covered with Hi intensity prismatic Retro Reflective sheeting confirming to Type IV ASTM D 4956 and symbol should be printed. The board should be mounted on a frame made of ms square pipe of 32x32x1 mm The board should be further mounted on a M.S. Square pipe post of 3 mtrs length and dimension 50x50x1.5 mm. The frame and post should be coated in two layers of red oxide and two layers of paint.

Group 5 , Convex Mirror 32 inch with circular pipe 65 NB post height of 1.00 mtr ISI marked.

Group 6 , MS Delineations Ellipsoidal or circular design HT 800 to 900 mm, Ground with about 200 to 300 mm base anchored onto the ground as per Fig 1 page 3 of IRC 79 2019 and latest. MS guide poles shall confirm to Type XI sheeting specifications as per IRC 67 2022 and ASTM D 4956.

Group 7 , Hazard Marker Left 300 x 900 mm as per IRC 67 2022 Fig no. 15.78 made on 3mm thick Aluminium Composite panel covered with Hi intensity prismatic Retro Reflective sheeting confirming to Type IV ASTM D 4956 and symbol should be printed. The board should be mounted on a frame made of ms square pipe of 32x32x1 mm The board should be further mounted on a M.S. Square pipe post of 3 mtrs length and dimension 50x50x1.5 mm. The frame and post should be coated in two layers of red oxide and two layers of paint as per IRC 67 2022 Drg Fig 15.78

Group 8 , Hazard Marker Right 300 x 900 mm as per IRC 67 2022 Fig no. 15.78 made on 3mm thick Aluminium Composite panel covered with Hi intensity prismatic Retro Reflective sheeting confirming to Type IV ASTM D 4956 and symbol should be printed. The board should be mounted on a frame made of ms square pipe of 32x32x1 mm The board should be further mounted on a M.S. Square pipe post of 3 mtrs length and dimension 50x50x1.5 mm. The frame and post should be coated in two layers of red oxide and two layers of paint as per IRC 67 2022 Drg Fig 15.79 .

Group 9 , Chevron Sign board Left 600x500 mm as per IRC 67 2022 Fig as 15.74 made on 3mm thick Aluminium Composite panel covered with Hi intensity prismatic Retro Reflective sheeting confirming to Type IV ASTM D 4956 and symbol should be printed. The board should be mounted on a frame made of ms square pipe of 32x32x1 mm The board should be further mounted on a M.S. Square pipe post of 3 mtrs length and dimension 50x50x1.5 mm. The frame and post should be coated in two layers of red oxide and two layers of paint.

Group 10 , Chevron Sign board Right 600x500 mm as per IRC 67 2022 Fig No. 15.74 made on 3mm thick Aluminium Composite panel covered with Hi intensity prismatic Retro Reflective sheeting confirming to Type IV ASTM D 4956 and symbol should be printed. The board should be mounted on a frame made of ms square pipe of 32x32x1 mm The board should be further mounted on a M.S. Square pipe post of 3 mtrs length and dimension 50x50x1.5 mm. The frame and post should be coated in two layers of red oxide and two layers of paint.

Group 11 , Road Stud as per IRC 35 2015 made of polycarbonate and ABS metal body size 100x90mm height not exceed 20 mm . Reflective Lenses shall be molded of methacrylate confirming to ADTM d 788 or equivalent. Compressive strength of minimum 13635 kg tested in accordance to ASTM D 4280. Visual observation and co efficient of luminous intensity as per MoRTH specifications section 800 Table 800 13. Warranty 2 years.

Group 12 , Solar Road Stud size 130x120x20 mm Red Colour, Solar Cell IP 67 130 MA 1800 MAH 3.25V. Compressive strength of minimum 13635 kg tested in accordance to ASTM D 4280. The product should be resistant to water ingress according to IP 65 standards with IS 12063 1987 Category 2, Warranty 2 years.

Group 13 , Crash Barrier oblique Guardrail Three Beam One set of TSS1 Threi Beam 1 No. Posts 2 Nos. Spacers 2 Nos. Dome Headed Bolts 16 Nos. Hexagonal Headed Bolts 6 Nos. Length of Beam 4318 mm Width of Beam 505 mm The Length of Post 2000mm

Group 14 , Solar Delineator Cum fog edge indicator guide posts made of Mild steel of 75 oblique 76 OD and 1.5mm thickness with pure polyester powder coating with the minimum thickness of powder coating of not less than 60 micron for protection against corrosion. The surface should be concealed so that there should not be any exposed surface without powder coating. The posts should have a circular design with the height of 900 mm above the ground and 300mm base underground total 1200mm.The guide post indicator shall have 8 red LEDs on equalivant gap total 48LEDs for brighter viewing of the motorists in fog. The LEDs shall start blinking as it gets dim. The post shall have solar panel on top of the surface for recharging. Further it should have 2 strips of 150mm each of Type XI sheeting specifications as per IRC 67 and ASTM D 4956 which would ensure to obtain clear visibility of the road alignment during night time also.

Group 15 , Epoxy Resin Hardener and Filler Kit for Road stud fixing application.