Yogi Vemana University Tender

Civil and Painting Work;Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504).- Ground Floor

Civil and Painting Work;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402)- Ground Floor

Civil and Painting Work;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402)- First Floor

Civil and Painting Work;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed blocks & hold fasts for finished item of work. (APSS No. 402)- Second Floor

Civil and Painting Work;Plain Cement Concrete M 20 nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges centering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for Lintels for finished item of work. (APSS No. 402)- for bed

Civil and Painting Work;Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m, using glass strips and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal sand and water and overheads & contractors profit complete for finished item of work. (APSS No.701 & 710)

Civil and Painting Work;Flooring with polished shahabad / Tandur stone slabs of 15 mm to 18 mm thick set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)

Civil and Painting Work;Flooring with non-skid red or white full body Ceramic floor tiles of size 400 mm x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)- Ground Floor

Civil and Painting Work;Flooring with non-skid red or white full body Ceramic floor tiles of size 400 mm x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)- First Floor

Civil and Painting Work;Supply and fixing jallies ( cement concrete ) of 50mm thick as per the design approved by the Engineer-in-Charge including cost and conveyance of materials to site and labour charges etc., overheads & contractors profit complete for finished item of work.

Civil and Painting Work;Supply and fixing jallies ( cement concrete ) of 50mm thick with available as per the design approved by the Engineer-in-Charge including cost and conveyance of materials to site and labour charges etc., overheads & contractors profit complete for finished item of work.

Civil and Painting Work;Supplying and fixing of MS Grill to windows / in open court yards using 35mm x35 mmx 6mm L angle around and 12 mm MS Square bars Horizontals at 100 mm C/C and verticles at 6 nos's including and fixing with 4 nos of MS Z hold fasts ( 2 on eahc side) duly making cutting brick masonary, fixing and making to original surface neatly including cost and conveyance of all materials cutting bending welding operational charges labour charges overheads and contract profit etc., complete for finished item of work ( Size : 6.5X2.70 m ).

Civil and Painting Work;Supplying and fixing of MS Grill to windows / in open court yards using 35mm x35 mmx 6mm L angle around and 12 mm MS Square bars Horizontals at 100 mm C/C and verticles at 6 nos's including and fixing with 4 nos of MS Z hold fasts ( 2 on eahc side) duly making cutting brick masonary, fixing and making to original surface neatly including cost and conveyance of all materials cutting bending welding operational charges labour charges overheads and contract profit etc., complete for finished item of work ( Size : 3.5X1.85 m ).

Civil and Painting Work;Supplying and fixing of MS Grill to windows / in open court yards using 35mm x35 mmx 6mm L angle around and 12 mm MS Square bars Horizontals at 100 mm C/C and verticles at 6 nos's including and fixing with 4 nos of MS Z hold fasts ( 2 on eahc side) duly making cutting brick masonary, fixing and making to original surface neatly including cost and conveyance of all materials cutting bending welding operational charges labour charges overheads and contract profit etc., complete for finished item of work ( Size : 4.37X1.85 m ).

Civil and Painting Work;Supplying and fixing of MS Grill to windows / in open court yards using 35mm x35 mmx 6mm L angle around and 12 mm MS Square bars Horizontals at 100 mm C/C and verticles at 6 nos's including and fixing with 4 nos of MS Z hold fasts ( 2 on eahc side) duly making cutting brick masonary, fixing and making to original surface neatly including cost and conveyance of all materials cutting bending welding operational charges labour charges overheads and contract profit etc., complete for finished item of work ( Size : 11.85X1.85 Grill /1.2X2.1 door size).

Civil and Painting Work;Supplying and fixing of MS Grill to windows / in open court yards using 35mm x35 mmx 6mm L angle around and 12 mm MS Square bars Horizontals at 100 mm C/C and verticles at 6 nos's including and fixing with 4 nos of MS Z hold fasts ( 2 on eahc side) duly making cutting brick masonary, fixing and making to original surface neatly including cost and conveyance of all materials cutting bending welding operational charges labour charges overheads and contract profit etc., complete for finished item of work( Size : 10.45X1.85 Grill /1.2X2.1 door size).

Civil and Painting Work;Supplying and fixing of MS Grill to windows / in open court yards using 35mm x35 mmx 6mm L angle around and 12 mm MS Square bars Horizontals at 100 mm C/C and verticles at 6 nos's including and fixing with 4 nos of MS Z hold fasts ( 2 on eahc side) duly making cutting brick masonary, fixing and making to original surface neatly including cost and conveyance of all materials cutting bending welding operational charges labour charges overheads and contract profit etc., complete for finished item of work ( Size : 6.8X1.85 Grill /1.8X2.1 door size).

Civil and Painting Work;Supplying and fixing of MS Grill to windows / in open court yards using 35mm x35 mmx 6mm L angle around and 12 mm MS Square bars Horizontals at 100 mm C/C and verticles at 6 nos's including and fixing with 4 nos of MS Z hold fasts ( 2 on eahc side) duly making cutting brick masonary, fixing and making to original surface neatly including cost and conveyance of all materials cutting bending welding operational charges labour charges overheads and contract profit etc., complete for finished item of work ( Size : 4.37X1.85 m grill size /1.8X2.1 door size)

Civil and Painting Work;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Civil and Painting Work;Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Civil and Painting Work;Supplying and fixing single side prelam solid panel PVC door frame (Choukhat): Providing and fixing factory made Pac single side Prelam door frame of the size 50x7 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2 Nos. of 150mm long brackets of 1515mm MS Square tube. The two vertical door profiles are to be reinforced with 19 x 19mm MS. square tube of 19 guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4 Nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-incharge including conveyance of all materials, labour charges for fixing, overheads & contractors profit complete for finished item of work.

Civil and Painting Work;Providing and fixing 30mm thick factory made solid single side prelam panel PVC door shutter consisting of frame made out of MS. Tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, and 15mm x 15mm for top and bottom rails. The MS frame shall have a coat of steel primers of approved make and manufacture. MS frame covered with 5mm thick heat moulded ?Rajshri? single side Prelam Pac ?C? channel of size 30mm x 50mm to form stiles.5mm thick& 75mm wide single side prelim Pac sheets shall be for the top, bottom and lock rails. Panelling of 5mm thick one side Pac sheet to be fitted in the MS frame and sealed to the front (prelam side) stiles and rails (which should have a 5mm 45 bent portion as beading) and attached to the back(white/ivory) stiles and rails which should have a 10mm 900 bent portion as beading) using 2nos. 15mm wide x 5mm thick Pac sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc. an additional 5mm thick Pac strip of 20mm width to be stuck on the interior side of the ?C? channel using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc., complete as per direction of Engineer ?in-Charge, manufacture specification and drawing including ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop bushes including labour charges for fixing the shutter to frame etc., including overheads & contractors profit complete for finished item of work

Civil and Painting Work;Supply and fixing Powder Coated Mild Steel Hallow singlerebate door frames manufactured usingcold roll formed process steel sheet of1.25 mm thick bright (Cold Rolled CloseAnnealed (CRCA) and profile size of105 x 60 mm conforming to IS 4351 -2003 including pretreatment, Galvanizedas per IS:277, zinc phosphating finishedwith Thermosetting Polyurethane paintof Aliphatic Grade providing high levelsof scratch resistance anddurability/Epoxy polyester powder forpowder coating paint thickness 60 ? 65microns(Dry film thickness)StainlessSteel Ball Bearing Butt Hinges 3 mmthick fixed flush to the frame withHinges, Base Ties, Holdfast Lugs,Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock& Strike plates etc. for both single anddouble shutter doors etc., complete as per manufacuture specification and direction of Engineer- in - chrge including conveyance of all materials labour charges for fixing overheads & contractors profit complete for finished item of work.

Civil and Painting Work;Supply and fixing of ISI marked flush door shutters of 35 mm thick single shutter with laminated both side with laminatin sheets bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides and laminated sheets on both sides including cost and conveyance to site flush shutter including supply and fixing including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2100mm)

Civil and Painting Work;Supply and fixing of steel maskito mesh to ventilators with teak wood beading all around incluiding cost and conveyance of all materials labor charges fixing in position overheads & contractors profit etc., complete for finished item of work (as approved by the Engineer in charge ) 1100 mm X960 mm)

Civil and Painting Work;Supply and fixing of plain glass 5 mm thick to windows rubber beading, including cost and conveynance to site of glass, rubber beading, fixtures etc., including labor charges fixing in position overheads & contract profit etc., complete for finished item of work (as approved by the Engineer and fixers shall be of ISI marked) (05 mm X1.25mm)

Civil and Painting Work;Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Civil and Painting Work;Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre over prime coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Civil and Painting Work;Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work

Civil and Painting Work;Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (short body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.

Civil and Painting Work;Painting to old walls with 1 coat of plastic emulsion paint of approved brand and shade after thorughly brushing the surface to remove alldirt and remains of loose powdered materials, including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Civil and Painting Work;Painting to old walls with 2 coats o f acrylic exterior emulsion paint of approved brand and shade after thorughly brushing the surface to remove alldirt and remains of loose powdered materials, for exterior walls including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Civil and Painting Work;Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Civil and Painting Work;Painting to old walls with 1 coat of plastic emulsion paint of approved brand and shade after thorughly brushing the surface to remove alldirt and remains of loose powdered materials, including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Civil and Painting Work;Painting to old walls with 2 coats o f acrylic exterior emulsion paint of approved brand and shade after thorughly brushing the surface to remove alldirt and remains of loose powdered materials, for exterior walls including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Civil and Painting Work;Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Civil and Painting Work;Painting to old walls with 1 coat of plastic emulsion paint of approved brand and shade after thorughly brushing the surface to remove alldirt and remains of loose powdered materials, including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Civil and Painting Work;Painting to old walls with 2 coats o f acrylic exterior emulsion paint of approved brand and shade after thorughly brushing the surface to remove alldirt and remains of loose powdered materials, for exterior walls including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Civil and Painting Work;Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).