Water Resources Department Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Water Resources Department - WRD Tender
Civil And Construction
Building Construction
Opening Date24 Jan 2022
Closing Date22 Feb 2022
Tender Amount₹ 22,28,769
Costs
EMD
₹ 53,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
UKPRR/2021-22/BD/WORK_INDENT774Bid Award Id
ViewTender No
UKPRR/2021-22/BD/WORK_INDENT774Tender Authority
Water Resources Department ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
KSRB 2.5 : Earthwork excavation ( in deposited soil ) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with all lead and lift including cost of all labour complete as per specifications. specification. No. KBS 2.9.9 / 2.9.10.1 / 2.1.1 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
171.89
-
69271.67
... More
KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix M7.5 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregtes @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
9.47
-
49234.53
... More
KSRB 4-1.2 : Providing and removing centering, shuttering, strutting, propping etc.,and removal of form work for sides and soffits of beams, beam haunchings,cantilever girders, bressumers and lintels not exceeding 1m in depth including costof all materials, labour complete as per specifications.Specification No. KBS 4.6.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
24.3
-
6196.5
... More
KSRB 5-1.3 : Providing and constructing granite/trap/basalt rubble stone masonry in foundation with cement mortar 1:6 (uncoursed), bond stones at two m apart in each course including cost of materials, labour, curing complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4.59
-
16120.08
... More
KSRB 5.3-3 : Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
8.18
-
47378.56
... More
KSRB 4-6.8 : Providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for sides and soffits of beams, beams haunchings, cantilever, girders, bressumers and lintels exceeding 1m in depth including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
189.84
-
75746.16
... More
KSRB 4-1.2 : Providing and removing centering, shuttering, strutting, propping etc.,and removal of form work for sides and soffits of beams, beam haunchings,cantilever girders, bressumers and lintels not exceeding 1m in depth including costof all materials, labour complete as per specifications.Specification No. KBS 4.6.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
79.47
-
23205.24
... More
KSRB 4-6.5 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square I rectangular/ polygon in plan including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
66.1
-
30141.6
... More
KSRB 4-6.2: Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes thickness upto 200mm including cost of all materials, labour complete as per specifications, Specification No. KBS 4.6.2(0-5m above GL) with all lead and lifts etc complete & as per directions of Engineer in charge of work.
83.29
-
32982.84
... More
KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor, cills, plinth including cost of all materials, labour complete as per specificaiton. Specification No. KBS 4.6.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
6.74
-
4866.28
... More
KSRB 4.2.8 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @3lts confirming to IS9103- 1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for R.C.C. beams, columns of all sizes in foundation plinth and superstructure ground floor level for roof slabs, staircase, lintles, columns, including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1, 4.6 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
62.48
-
371256.16
... More
KSRB 4-6.10 :Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specificaiton. Specification No. KBS 4.6.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
6.54
-
2092.8
... More
KSRB 4.2.11 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 27.20kgs, with 12mm and down size graded granite metal coarse aggregates @0.5865cum and fine aggregtes @ 0.391cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 8.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete as per specifications. Specification No. KBS 4.1, 4.6 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
6.54
-
3270
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3(Fe-550) with all lead and lifts etc complete & as per directions of Engineer in charge of work.
10.8
-
766346.4
... More
KSRB 6-1.3 : Providing and constructing burnt brick masonry with approved quality of modular bricks ground moulded of standard size of class designation 3.5 N/Sqmm with cement mortar1:6 for basement and superstructure with cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
35.96
-
219104.28
... More
KSRB15-3.13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
88.32
-
19783.68
... More
KSRB 10-3 :Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc , consisting of following application. (a) Applying and grouting a slurry coat of neat cement using 2.75 kglsqm of cement admixed with proprietary water proofing compound conforming to 18:2645 over the RCC slab after cleaning the surface before treatment. (b) Laying cement concrete using broken brick bats 25mm to 1OOmm size with 50% of cement mortar 1:5 admixed with proprietary water proofing compound conforming 18:2645 over 20mm thick layer of cement mortar 1:5 admixed with proprietary water proofing compound to required slope and treating similarly the adjoining walls upto 300mm height including rounding off junctions of walls and slabs. (c) After two days of proper curing, applying a second coat of cement lurry admixed with proprietary water proofing compound (d) Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 admixed with proprietary water proofing compound and finally finishing the surface with trowel and neat cement slurry and making of 300x300mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test including cost of materials, labour complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
86.01
-
86182.02
... More
KSRB 4-1.6 ; Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 ems. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM curing complete as per specifications. Specification No. KBS 4.1, 4.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
5.75
-
30365.75
... More
KSRB 4-1.7 : Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes @ 0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
7
-
18333
... More
KSRB 14.10-1: Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, including cost of materials, labour, curing, polishing complete as per specifications. Specification No. KBS with all lead and lifts etc complete & as per directions of Engineer in charge of work.
65.58
-
82106.16
... More
KSRB15-3.3 : Providing 12mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
108.18
-
20878.74
... More
KSRB15-5 : Providing rough cement plastering 15mm thick in single coat with cement mortar to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. in CM 1:4 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
39.22
-
8000.88
... More
Providing and fixing colour glazed tiles of size 300mmx450mm for walls with borders of size 300x100mm, set in Cement Mortar 1:3 and pointed with white cement with matching colour pigment with necessary curing, cleaning including providing and removing scaffolding wherever necessary etc., complete. The work includes cost of all materials, mortar, labour charges for all items of work, hire charges for equipment etc, complete as per specification with all lead and lifts etc complete & as per directions of Engineer in charge of work.
39.22
-
40514.26
... More
Providing and fixing Ceramic tiles of size 400mmx400mm for flooring, threads, steps and landing, laid on a bed of 20mm thick cement mortar 1:3 mix flush pointing with white cement mixed with matching colour pigment including curing, cleaning etc., complete. The work includes cost of all materials, mortar, labour charges for all items of work, hire charges for equipment, etc., complete as per specification with all lead and lifts etc complete & as per directions of Engineer in charge of work.
9.94
-
10268.02
... More
KSRB15-3 : Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required srnooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
230.92
-
48031.36
... More
KSRB15-3 : Providing 20mm thick cement plaster in single coat with cement mortar, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, including providing and removing scaffolding, cost of materials, labour, curing etc., complete as per specification with all lead and lifts etc complete & as per directions of Engineer in charge of work.
6.75
-
1404
... More
KSRB 9.4-3 : Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications. Specification No. KBS 9.33 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
0.42
-
23584.26
... More
KSRB 9-7.3 :Providing and fixing in position fully panelled Mathi/ Nandi wood shutters for doors, styles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications. (excluding cost of fixtures) Specification No. KBS 9.34 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4.73
-
15429.26
... More
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum Ti02(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer framehaving a overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standardhardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size - 1519mm x 1519mm with all lead and lifts etc complete & as per directions of Engineer in charge of work.
5.76
-
26150.4
... More
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum Ti02(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with Gl reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm. Maximum possible size - 1OOOmm x 1000mm with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1.89
-
6864.48
... More
KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
5476
... More
KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification No. KBS 7.12 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
356.04
-
33823.8
... More
KSRB 15-14.2 Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.(for ceiling) with all lead and lifts etc complete & as per directions of Engineer in charge of work.
176.84
-
20867.12
... More
KSRB 15-14.2 Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.(for walls) with all lead and lifts etc complete & as per directions of Engineer in charge of work.
187.87
-
20665.7
... More
KSRB 15-16.1 • Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.(with primer) with all lead and lifts etc complete & as per directions of Engineer in charge of work.
237.67
-
24242.34
... More
KSRB 15-17.4 : Applying priming coat over new wood surface and / or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
10.63
-
329.53
... More
KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
19.14
-
1856.58
... More
KSRB 15-18.2 : Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
27.18
-
2582.1
... More
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/SOmm sizecomplete as per manufacturers specification & direction of Engineer-in-charge with all lead and lifts etc complete & as per directions of Engineer in charge of work.
3.78
-
1769.04
... More
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for styles and 15x15mm for top & bottom rails, covered with heat moulded PVC channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges with all lead and lifts etc complete & as per directions of Engineer in charge of work.
3.78
-
10497.06
... More
KSRB 11-11.6 :Providing and fixing white vitreous china clayof size 600x480 mm Specification No. KBS 11, angle back wash basin size with a single 15mm C.P brass pillar tap with C. I I M .S brackets, 32 mm C P brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
3288
... More
KSRB 11-4 : Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, (approved make ) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
2067
... More
KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type (Pedestal type, P-trap) with black solid plastic seat and lid, C. P brass hinges, rubber buffers. 10 litre low level, PVC flushing cistern ( all are approved make ) with fittings, C. I I M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and rnaking good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
4956
... More
Providing and fixing CI Nahani Trap of approved made confirming to ISI specifications and construction of cistern in CC 1:2:4 as per directions. (Rate includes cost of all materials, fixtures and lead) -do- 10cm x 7.50 cm with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
1000
... More
Providing stoneware gully trap of approved quality and make fixing in CC 1:2:4 and plastering with CM 1:3 wherever necessary (Rate includes cost of all materials,fixtures and lead) 10cmx10cm with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
760
... More
KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks as per IS 12701: 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
6828
... More
KSRB 12-8.1 : Constructing brick masonry inspection chamber 455x610mm, and 450mm depth, (clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS with all lead and lifts etc complete & as per directions of Engineer in charge of work.
2
-
14128
... More
KSRB13-4.2 : Making connection of G.I distribution branch with G.I main of 50 to 85mm. and 100 to 150 nominal bore, including cutting and threading the pipes, providing and fixing Tee, nuts, labour for all item of works, testing and HOM of equipments complete as per specifications. Specification No.KBS 13.10 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
879
... More
KSRB13-8.9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 75 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.2 / 13.9 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
76
-
32300
... More
KSRB13-8.9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 75 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.2 / 13.9 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
86
-
36550
... More
KSRB13-8.9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 50 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.2 / 13.9 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
30
-
9840
... More
KSRB13-8.9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 32 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.2 / 13.9 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
30
-
7050
... More
KSRB13-6.4-2 : Providing and fixing in position brass ball valve high or low pressure with plastic float of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
1436
... More
KSRB13-6.2-2 : Providing and fixing in position brass stop cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
564
... More
KSRB13-6.1-3 Providing and fixing in position brass bib cock of approved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No.KBS 13.2.2/13.3(25mm NB) with all lead and lifts etc complete & as per directions of Engineer in charge of work.
3
-
708
... More
Aluminium handles - 15mm with all lead and lifts etc complete & as per directions of Engineer in charge of work.
8
-
474.56
... More
Aluminium hinges 75 mm length with all lead and lifts etc complete & as per directions of Engineer in charge of work.
8
-
271.2
... More
Aluminium tower bolt - 20 cm with all lead and lifts etc complete & as per directions of Engineer in charge of work.
6
-
457.62
... More
Aluminium tower bolt - 20 cm with all lead and lifts etc complete & as per directions of Engineer in charge of work.
12
-
10170.72
... More
KSRB 11-15.1 • Providing and fixing 600x450mm bevel lead edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C. P screws, washers, including cost of materials, labour complete as per specifications with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
1157
... More
Supplying…25…mm dia 2mm/2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary with all lead and lifts etc complete & as per directions of Engineer in charge of work.
40
-
2120
... More
Supplying 25 dia 2mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc.,and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary with all lead and lifts etc complete & as per directions of Engineer in charge of work.
50
-
2700
... More
Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete.12"x9"x3" (300x228x76) with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
344
... More
Supply and fixing of bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches.as per IS 1293 and IS 3854 16Combined switch and socket with indication Group-A with all lead and lifts etc complete & as per directions of Engineer in charge of work.
30
-
5250
... More
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, copper conductor flexible multistrand FRLS PVC insulate, 2x1.5 sqmmcable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch with all lead and lifts etc complete & as per directions of Engineer in charge of work.
10
-
2000
... More
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, copper conductor flexible multistrand FRLS PVC insulate, 2x1.5 sqmmcable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
1100
... More
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, copper conductor flexible multistrand FRLS PVC insulate, 2x1.5 sqmmcable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr up to 10Mtr from tapping point to out let via switch with all lead and lifts etc complete & as per directions of Engineer in charge of work.
8
-
3200
... More
Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. 6Amps 3/5 Way with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
528
... More
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws with all lead and lifts etc complete & as per directions of Engineer in charge of work.
5000
-
1350
... More
Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size …110…mm conduit using necessary machine screws with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
44
... More
Supplying and fixing a drop light using one PBBC/bakelite pendent holder, PVC insulated twin twisted copper wire of 23/0.0076"upto 1Mtr, one of 60/100 watts lamp of 230 volts grade and one of 5 amps bakelite ceiling rose fixed on the existing wooden block of the outlet with all lead and lifts etc complete & as per directions of Engineer in charge of work.
2
-
242
... More
Supplying and fixing PBBC bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps with all lead and lifts etc complete & as per directions of Engineer in charge of work.
10
-
880
... More
Supplying & fxing retroft type -PL- LED Lamp 18-20W LED linear source with CCT 6500 degree K, CRI 70%. effcacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18-20 Watts with all lead and lifts etc complete & as per directions of Engineer in charge of work.
12
-
5100
... More
Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL /LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clampswith all lead and lifts etc complete & as per directions of Engineer in charge of work.
12
-
1320
... More
supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc. for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 46" Economy model with all lead and lifts etc complete & as per directions of Engineer in charge of work.
3
-
6270
... More
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring completelywith all lead and lifts etc complete & as per directions of Engineer in charge of work.
3
-
450
... More
Supplying and fixing 8 way SP & N regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc.. With provisions for fixing suitable type capacity MCB's single phase /3 phase/single door with powder coated painting. Made out of 14 SWG MS encloure with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
960
... More
Supplying and fixing 5-32 Amps SP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898with all lead and lifts etc complete & as per directions of Engineer in charge of work.
4
-
1736
... More
Supplying and fixing 5-32 Amps DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898 with all lead and lifts etc complete & as per directions of Engineer in charge of work.
2
-
1818
... More
supplying, fixing , wiring, earth electrode for grounding conduits. I.C, cutouts and other equipment's on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5 mtr long buired in a pit… The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc. the pipe shall have 16 through holes of 122 mm dia with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
2999.7
... More
Supplying of 1.1 kv 2 core 10 sqmm LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised, steel strip ( except 2Cx10sq.mm wire armoured) confirming to IS-3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 part-1:1988 & confirming to GTP of GROUP-A with all lead and lifts etc complete & as per directions of Engineer in charge of work.
120
-
11400
... More
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/on wall/on pole as required with all lead and lifts etc complete & as per directions of Engineer in charge of work.
100
-
1188
... More
Digging of trench of 0.6 m deepx0.50 mtr wide in hard soil refilling the trench to the required ground level and consolidating etc complete with all lead and lifts etc complete & as per directions of Engineer in charge of work.
100
-
10200
... More
supplying, fixing and wiring electronic 5 to 20 Amps single phase class-1 Accuary with Temper proof Energy Meter with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
1150
... More
Supplying andfixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV with all lead and lifts etc complete & as per directions of Engineer in charge of work.
10
-
3350
... More
Supplying PVC/GI flexible conduit pipe25…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and the either end of the pipe terminated completely with all lead and lifts etc complete & as per directions of Engineer in charge of work.
10
-
280
... More
supplying and fixing LT cast Iron pot heads suitable for 1.1 kv class 10 sqmm UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
260
... More
supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kv class (metal only) 25 mmwith all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
84
... More
"supplying and installation/Fixing/Provision of 300mmx300mmx214mm Outdoor type Thermoplastic Modular Panel enclosure with transparent polycarbonate Lid, shock proof, IP65 (Weather Proof) rust proof, dust proof, water proof, corrosion proof, having internally Embedded gasket on both lid and flap suitable to fix Single phase/Three phase Energy Meter in suitable base plate and having a provision for Fuse/MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility with all lead and lifts etc complete & as per directions of Engineer in charge of work.
1
-
3754
... More
Supplying and Fixing of25mm dia class A GI pipe bracket up to 2 Mtrs long bent at suitable angle and fxing to this bracket 1x40/2x40 watts fluorescent tube street light ftting of all capacities to GI or CI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. 25mm GI Pipe with all lead and lifts etc complete & as per directions of Engineer in charge of work.
8
-
6200
... More
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fxture with 40W System Power consumption. LED Effciency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certifed agency & Design & Development facility certifed by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source with all lead and lifts etc complete & as per directions of Engineer in charge of work.
8
-
26896
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements