Tungabhadra Board Tender

F Type Renovation;Dismantling of existing structures cement concrete by manual means including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead up to 50m including breaking of clods complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and laying in position plain cement concrete for leveling course of mix 1:2:4 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregates @ 0.459cum machine mixed, concrete laid in layers not exceeding 15cm thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and constructing granite/trap/basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15cms high, bond stones at 2m apart in each course including cost of materials, labour, curing complete as per specification as directed by the Engineer in Charge.

F Type Renovation;Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes @ 0.56cum, machine mixed, concrete laid in layers not exceeding 15cm thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specification as directed by the Engineer in Charge.

F Type Renovation;Providing and constructing burnt brick masonry for superstructure in CM 1:6 with approved quality of non-modular bricks of standard size of class designation 5 Newton per sqmm (table moulded) including cost of materials, labour charges, scaffolding, curing complete as per specification as directed by the Engineer in Charge.

F Type Renovation;Providing 12mm thick cement plaster single coat with cement mortar 1:3 for ceiling of all slabs and internal faces of superstructure of brick masonry walls including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as directed by the Engineer in Charge.

F Type Renovation;Providing TMT steel grade Fe500 reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and removing centering, shuttering, strutting propping etc, and removal of form work for suspended floors, landings, balconies and likes, thickness, up to 200mm including cost of all materials. labour complete as per specification as directed by the Engineer in Charge.

F Type Renovation;Providing and laying in position RCC for roof slabs, beams of design mix M25 with OPC cement @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70cum and fine aggregates @ 0.47cum, with super plasticizer @3lts confirming to IS9103-1999 reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15cm thick, vibrated for all works in ground floor level including attached pilasters, columns, lintels, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specification as directed by the Engineer in Charge.

F Type Renovation;Providing and filling sand in foundation upto plinth to required depth for sub soil treatment including watering ramming with all lead and lift complete as per specification as directed by the Engineer in Charge.

F Type Renovation;Providing and applying painting on interior wall surface in two coats with plastic emulsion paint with primer of approved brand to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and finishing external walls in two coats with waterproof cement paint with primer of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and fixing 65mmx90mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM) UV stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 6 locations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/Plaster with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the frame but including cost of materials, labour, HOM of machineries complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using UV stabilized Isopthalic Gelcoat and on layer of 45 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.5mm expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confirmation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments, exclusive of cost of fixtures and inclusive of supply of shutters to respective work spot including cost of materials, labour, HOM of machineries complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and fixing aluminum casement windows, using aluminum section anodized to 12-15 microns, combination of fixed glazing at top fully openable windows using Z sections of 33mm, web thickness 4mm, weight 0.663kg/m; central mullion section 59x33mm with web thickness 3mm section weight 1.123kg/m; the shutters on aluminum hinges with approved quality of fixtures such as aluminum tower bolts, handles, stays etc., providing and fixing 5.5mm plain glass for shutters fitted with glazed clips 19mmx17.3mmx11mm, 0.9mm thick and rubber beading, aluminum sections cutting to required length, joints metered, subdividing the frame tennoned and riveted, assembled frame to be stiffened with end clips at corner, angles and fixed to wall, lintel beam, floor; cill, as the case may be with necessary screws, rawl plugs, cutting masonry or concrete and making good the original surface; aluminum surface pretreated for removal of any rust and coated with greasy materials for no adherence of mortar or any other sticky materials; (coating removed after installation) and thoroughly cleaned free from dirt, rust etc., including cost of materials, fixtures, labour and HOM of machinery complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and laying flooring with M15 cement concrete 40 mm thick using broken granite 20mm and down size laid to line and level in one layer and finish with a floating coat of neat cement , including cost of materials, labour, curing, complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing RCC design mix M20 for 7.5cm thick solid parapet or perforated as per design using granite metal 20mm and down size, specification and directions (exclusive of cost of steel and fabrication charges) including necessary centering, form work and finishing smooth with CM (1:3) etc., complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing flooring with 60cm x 60cm size vitrified glazed tiles of approved quality & make, fixed on top of existing flooring fixed with suitable adhesive, including cutting the tiles to the required size and fixing etc., complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing Ceramic tiles of size 30x30cms 6mm thick of approved make, shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment, including cost of materials, labour, curing, complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and placing on terrace, polyethylene water storage tanks 1000 litre capacity with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Supply and fixing of door frame made of hollow extruded PVC Section (Nandi or Equivalent) having dimension of 40x57mm with the wall thickness of 2mm+/-0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2corners shall be metric cut/welded complete as per specifications and as directed by the Engineer in Charge.

F Type Renovation;Providing & fixing 30mm thick factory made rigid foam Prelam Paneled Door Shutters made from MS tube of 19x19mm, 19 gauge for styles and 15x15mm for top & bottom rails, covered with heat moulded Pre laminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form styles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Paneling of 5mm thick PVC sheet Prelaminated on either side fitted in the MS frame, Sealed to the styles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 Nos of 75mm Aluminum hinges with both side prelam as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing & of Fixed Louvered Ventilator made out of multi chambered uPVC sections with TPv gaskets having isolated drainage and reinforced with Galvanized Iron profiles through out the window. The outer frame having a overall size of 60x55mm with reinforcement of 1 mm thickness and Mullion with overall size of 74x60mm with reinforcement of 1 mm thickness. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, Wall thickness of frame Mullion shall be 2-2.2 mm complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and laying in position to required level or slope salt glazed 100mm stoneware pipes grade A and jointing with stiff mixture of cement mortar in proportion of 1:1, testing of pipes and joints, including cost of materials, labour charges complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and fixing to wall, ceiling and floor unplasticised 110mm PVC pipes 10kgf/Sqcm working pressure 32mm outside diameter chemp plast/Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and fixing Chlorinated Poly Venyl Chloride (CPVC) pipes 20mm dia conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints and cutting chases and good the walls etc.., complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and fixing white vitreous china clay, water closet European type (Pedestal type, P-trap) with black solid plastic seat and lid, CP brass hinges, rubber buffers 10 litre low level, PVC flushing cistern (all are approved make) with fittings, CI/MS brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a single 15mm CP brass pillar tap with CI/MS brackets, 32mm CP brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specification and as directed by the Engineer in Charge.

F Type Renovation;Supply and fixing of fresh air Exhaust fan 300 mm size (12") 1440rpm heavy duty metallic body of heavy duty 250V, AC 50Hz, of Crompton/ Havells/Bajaj/Orient make, wire mesh with condenser and erected in an approved manner, fan motor with moisture proof treatment and lettering Sl No and date of erection with enamel paint including cost and conveyance of all materials and labour charges etc complete for finished item of work as per the approval of the Engineer-in-Charge