Tribal Welfare Engineering Department Tender

Vibrated Reinforced Design mix Cement Concrete M25 Grade (Cement:fine aggregate:coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Footings.

Vibrated Reinforced Design mix Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Column pedastals

Vibrated Reinforced Design mix Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Columns

Vibrated Reinforced Design mix Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Plinthbeams.

Vibrated Reinforced Design mix Cement Concrete M25 Grade (Cement:fine aggregate:coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Roof beams

Vibrated Reinforced Design mix Cement Concrete M25 Grade (Cement:fine aggregate:coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Roof SLAB 125 MM THICK

Vibrated Reinforced Design mix Cement Concrete M25 Grade (Cement:fine aggregate:coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Lintels

RCCM25 Nominal mix Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work. (APSS.NO.309 & 310) for :- Refilling foundations.

Ceiling Plastering CM (1:3) Prop: 12mm thick in single coat sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290X200X140mm, for manufacturing of flyash solid blocks using flyash of 80kgs, cement of 15kgs, Gypsum of 5kgs, and stone dust with a compresive strength not less than 50kg/sqm including cost and conveyance of all materials, labour charges, excluding seigniorage charges, scaffolding and curing etc., for foundation and basement.

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290X200X140mm, for manufacturing of flyash solid blocks using flyash of 80kgs, cement of 15kgs, Gypsum of 5kgs. and stone dust with a compresive strength not less than 50 kg/sqm including cost and conveyance of all materials, labour charges, excluding seiniorage charges, scaffolding and curing etc., for Superstructure Walls.

Plastering with CM (1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement,sand,water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work (APSS 901,906)

Plastering with CM (1:5) Prop:12mm thick in single coat including cost and conveyance of all materials like cement,sand,water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work (APSS 901,906)

Supplying, fitting and placing HYSD (Fe 500/Tmt grade as per IS 1786-1985) bar reinforcement VRCC works complete including wastage, as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100,1600 MORTH for Bars 36mm dia and above, where welding required to be done compulsorily including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, opeational, labour cahrges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work. (APSS.No.126)

Supply and fixing of Window Two Leaf shutter with window frame of Medium Teak wood of Section 100MMX 75MM and shutter frame and shutter of 35mm thick of solid bond wood block board type with commercial play on both faces, and safety bars of 10mm square bars at 100mm center to center distance horizantally and Hardware fixtures ie., MSPC Butt Hinges 100mm Long 4nos, MSPC Handles 125mm Long 2Nos MSPC Tower Bolt 150mm long 4Nos, MS Hold Fast 4Nos Including Labour charges for making Window frame and shutter, fixing of Fixtures etc., and cost and conveyance of all materials to site, taxes extra complete for finished item of work.

Flooring with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, excluding seigniorage charges, etc., complete for finished item of work.

White washing two coats with White Cement or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls