Tribal Welfare Engineering Department Tender

Plain Cement Concrete (1:5:10) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work. (APSS No. 402).

Vibrated Reinforced Cement Concrete M20 Grade nomincal mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Footings.

Vibrated Reinforced Cement Concrete M20 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Pedastals.

Vibrated Reinforced Cement Concrete M20 Grade nominal mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Columns.

Vibrated Reinforced Cement Concrete M20 Grade nominal mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Plinth Beam.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Reinforced Cement Concrete M20 Grade nominal mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Lintels.

Reinforced Cement Concrete M20 Grade nominal mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Chajjas/Sunshades.

Reinforced Cement Concrete M20 Grade nominal mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Roof beams.

Vibrated Reinforced Cement Concrete M20 Grade nominal mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 330Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Roof Slab 125mm thick.

Brick Masonary in Superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290x225x140mm, for manufacturing of flyash sold blcoks using flyash of 80kgs, cement of 15kgs, Gypsum of 5kgs, and stone dust with a compressive strength not less than 50kgs/sqm including cost and conveyance of all materials, labour charges, excluding seigniorage charges, scaffolding and curing etc., for foundation and basement.

Brick Masonary in Superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290x225x140mm, for manufacturing of flyash sold blcoks using flyash of 80kgs, cement of 15kgs, Gypsum of 5kgs, and stone dust with a compressive strength not less than 50kgs/sqm including cost and conveyance of all materials, labour charges, excluding seigniorage charges, scaffolding and curing etc., for foundation and basement.

Ornamental Plastering to Ceiling with CM (1:3) Prop: 12mm thick in single coat spong finish including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidential charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.(APSS.No.901,906)

Plastering to even surfaces of wall with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)

Providing Impervious coat to exposed RCC roof slab surface with CM (1:3) 20mm thick with 1skg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, excluding conveyance charges of materials and including all operational, incidential and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, screened sand, water etc., to site, sales & other taxes on all materials, all operational, incidential and labour charges such as mixing mortar, scaffolding charges, lift charges, finishing including cutting of grooves wherever necessary as directed by Engineer-in-charge, curing, etc., for Uneven surfaces of Brick Wall complete for finished item of work (APSS.No.901,903 & 904) External walls.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

Supply and fixing of Doors as per approved drawings with Sal wood frame of section 90mm x 70mm flush door shutter of 35mm thick Single shutter with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-1) both sides commercial ply with internal lipping on all sides, including cost and conveyance to site of salwood frame, flush shutter including supply and fixing 6Nos MS Z hold fasts of size 300mm x 40mm x 5mm including cost of ISI marked aluminium fixtures of 6Nos butt hinges 150mm long - 1No, Aldrop 300mm x 16mm dia - 2 Nos tower bolts of 300mm x 12mm dia at top - 1No. Tower bolt of 150mm x 12mm dia at bottom - 2Nos, 150mm long handles - 2Nos heavy duty door stoppers and - 2Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shallbe embedded in flooring for a depth of not less than 10mm) (Door of size 900mm x 2100mm)

Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60+0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile) appropriate dimension of UPVC extruded glazing beads and UPVC extruded inter locks , EPDM gasket , wool pile , zinc alloy (white powder coated) touch locks with hook , zinc alloy body with single nylonrollers (weight bearing capacity to be 40kg) , GI fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screw sets . Profile of frame & sash shall be mitred cut and fusion welded at all corners , including drilling of holes for fiixng hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality , all complete as per approved drawing & direction of Engineering-charge inclusive of cost of single/double glass panes , wire mesh and silicon sealent two track two panels sliding window made of (small series) frame 52x44mm & sash 32x60mm both having wall thickness of 1.9 + 0.2mm and single glazing boad of appropriate dimension.

Flooring with granite stone tiles 8mm thick (mirror polished of all shades) set over base coat of cement mortar (1:6) 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all mateials like cement, sand water and tiles etc., complete, exclulding seigniorage charges, etc., complete for finished item of work.

Providing Skirting to internal walls to height of 15cm and Risers with granite stone 8mm thick (mirror polished of all shades) over base coat of CM(1:3) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., complete for finished item of work.

Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior grade - 1 of approved brand, making three (3) coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc., complete for finished item of work in all floors for Internal walls. (SS 911)

Painting to New External walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer-in-Charge over base coat of cement primer water base grade - II exterior making three coats in all to give an even shade after throughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site etc., sales & other taxes, all operational, incidential and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External walls.(APSS No.911)

Painting to New wood work with two coats of ready mixed synthetic enamel paint first quality all shades over red oxide primer grade-1 making three (3) coats in all to given and even shade after throughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidenital, operational and all labour charges etc., complete for finished item of work.

Supply and fixing of ISI mark 25mm dia 2.2mm thick PVC conduit pipe Sudhakar / Macoplast / Modimake concealed in roof slab with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.

Supply and fixing of ISI mark 25mm dia 1.8mm thick PVC conduit pipe Sudhakar / Macoplast / Modi make concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan pointand seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.

Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR P.V.C. insulated ISI Copper Cable GM/L&T/RPG/Havells/V-Guard/Power Flex/Polycab/Gold Medal/ Standard /Milion / Vimal/ Suncab/ Paragaon / FortuneArt make in the existing metallic / non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and fixing of 6A 3 pin and 6A 3pin plug socket with indicator lamp and 6A fuse unit and 6A switch control (5 in 1) of Milltec/Vimal opel/Maru mantero/Starex smil/CPL make with ISI mark duly recessed in wall with wooden deep box of 6"x8" x2 1/2" of size covered with hylam sheet including earth ontinuity including cost and conveyance of all materials to site , labour charges and sales tax etc., complete for finished item of work.

Supply and fixing of batten holder/slanting holder Anchor / Gold medal olive/Million zoom make with ISI mark in lieu of ceiling rose of light point with 40W bulb all connections including cost and conveyance of all materials to site , labour charges and sales tax etc., complete for finished item of work.

Supply and run of 1 of 14/.3mm (1.00 sq.mm) fire retardant PVC insulated flexible copper cable finolex RR Cabel/Fortune Art EBXL make with ISI mark in existing metallic/non-metallic conduit pipe for mains including cost and conveayance of all materials to site , labour charges and sales tax etc., complete for finished item of work.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) fire retardant PVC insulated flexible copper cable L&T/Havels/Standard/Polycab/Power flex make with ISI mark in existing metallic/non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour chargews and sales tax etc., complete for finished item of work.

Supply of 1200mm (48") sweep 230V, AC.50HZ ceiling fan of make Crompton Decore / Bajaj G Gold / Havells Deco / Usha striker / Orient PSPO. With 3 blades and double ball bearings with all standard accessories and stepped type electronic regulator of makes Miltec / Vimal opel / Maru Mantero / Starex smile / CPL.

Providing Independent earthing for main switches integrated circuit cutouts and motars with 40mm dia ' B ' class GI pipe of TATA/Zenith/GST make of 1.2m length duly providing 12mm dia 16 Nos holes and rewired botls ,nuts and washers , checknuts , Humepipe ring etc., as per IS specifications with necessary double GI earth wire No.8 SWG including filling with equal preparation of salt and charcoal in layers including cost and conveyance of all materials to site , labour charges and sales tax etf., complete for finished item of work.