Tribal Welfare Engineering Department Tender

Flooring with ceramic tiles Non-skid full body ceramic floor tiles of scratch free-stain free and scratch free-nano finish of size 600x600 mm and thickness between 8-10 mm1st quality confirming ot ISI 13711, IS:13712 IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortor (1:8) 12mm thick over C.C. bed already laid or R.C.C. roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete including seigniorage charges etc.,complete for finished item of work.

Brick Masonry in superstructure with CM (1:8) prop: using second class bricks of size 23 x 11 x 7 Cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work.

Ceiling with false ceiling Gypsum Board tiles of size not less than 0.595 M x 0.595 M of 12.5 mm thick with supporters of G.I. ceiling angular with Section 51.5 mm x 26 mm x 10.5 mm x 0.55 mm thick and all fixyures including cost and conveyance of all materials like other taxews on all materials, all operational, incidental charges and labour charges such as finishing complete for finished item of work.

Dadooing to walls with Supply of glazed full body ceramic wall tiles of size 300 mm x 600 mm and thickness between 6-8 mm1st quality confirming to IS: 13711, IS: 13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-Charge and set over a base coat of C.M. (1:5) 12mm thick and neat cement paste at the rates of 3.3 Kg/sqm and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water tiles etc., to site, seigniorage charges sales and other taxes on all materials and all operational and incidental charges etc.,complete for finished item of work.

High polished granite 16 to 18mm thick upto 8'-0" (2.43 cm) other than block and regular colours set over base coat of cm (1:6) joint of stone mat flushed over C.C. bed already laid including near cement slurry of honey like consistency spread @ 3.30. Kgs per sqm. jointed with neat cement to full depth mixed with pigment of matching shade, including cost of all materials like flooring flab, cement, sand, and water etc., complete excluding seigniorage charges all labour charges for laying, dressing, rubbing and polishing of flooring stones etc., curing complete for finished item of work.

Labour charges for Providing Half rounding the edges for granite stone slabs of all thickness including possessing the same including all labour charges for all operations for extra completing for finished item of work.

Providing and fixing 30mm thick BRAND FACTORY MADE BOTH SIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS tubes of 19 guage thickness and size of 19mm x 19mm for stiles, top and bottom rails MS frame shall have a coat of steel primers of approved make and manufacture MS frame covered with 5mm thick heat moulded "Rajashri" prelam Pac "C'" channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapeered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tappered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tappered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the pannel 10mm (5mmx2) thick, 20mm wide cross pac sheet shall be provided as gap insert for tp and bottom rail. Penolling of 5mm thick both side prelam Pac sheet to be fitted in the MS Frame welded/sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc., an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the "C' channel using Pac solvent cement adhesive etc., complete as per direction.

Supplying and fixing of unplasticised Poly Vinyl Chloride (UPVC) openable doors with openable shutters duly manufactured using UPVC reinforced profiles of 60mm x 55 mm x 2.0 mm for outer frames 70mm x 60mm x 2.25 mm for mullion sections as per the need and 102 mm x 60mm x 2.0 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5mm thick clear float glass of reputed make duly fixed with TPV Gaskets/EPDM weathering seal resistant and accessories for openable door-hinges of stainless steel grade 304-3 Nos, per shutter handle with mazak alloy casting 1 No per shutter locking system suitably concealed 1 No. with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon, rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, errection at site with templates for casement sizing complete for finished item of work.

Providing & Fixing of openable Windows with Fly-mesh made of pre-painted steel (Base steel as pedr IS 513 of 0.58 mm thick galvanised as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polysterl paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72 x 55mm centre mullion of 72 x 50mm section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm and the sections cut to length meter joined with corner bracket, center mullions fixed with mullion cap stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and pannelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonary wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch, complete, for finished item of work double shutter window with vertical mullion 3'.0" x 4'.0" (914.4 mm x 1219.2mm) outer frame section size of 72x50mm shutter frame section size of 48 x 25mm Mullion Section size of 72x50 mm.

Supplying & Fixing 550 x 400 mm Indian make wash hand basin (HSW/Parryware/Neycer) 1st quality confirming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore single chromium plated pillar Tap of 1st quality Indian make 400 grams seiko/Esso/Nice/Senior or equivalent complete with standard C1 brackets including wooden block, 12.7mm PVC connection with brass union nut CP coated 12.7 mm dia first qualify NP angle stop cock, 38.1 mm CP waste coupling, 31.75 dia PVC flexible waste pipe of 914.4 mm length of first quality including cost and conveyance of all materials to site, all labour charges etc.,complete for finished item of work.

Supplying & Fixing white glazed flat back half stall urinals 1st quality confirming to IS:2556-1995 with standard CP spreader of over all size 95x95x57 mm confirming to IS:2556 part 6 Sec-6-1974 fixed with screws complete indian make 590x375x39 mm including all labour charges etc.,complete for finished item of work.

Supply and fixing of PVC IOW level system with internal components & short bend: 10 litres capacity dual flush including cost and conveyance of all materials to site, labour charges for fixing etc., complete for finished item of work for all floors.

Supplying & Fixing of 12.7 mm heavy duty dia high neck trap 1st quality Indian make including all labour charges for all operations for extra completing for finished item of work for all floors.

Supply of 12" (300mm) light duty exhaust fan with metallic blades and wire guard etc., complete makes Crompton/Bajaj Bahar WG/Hvells Ventil Air-DB/ Orient hill air including cost and ocnveyance of all materials to site, labour charges for fixing etc., complete for finished item of work for all floors.

Supplying & Fixing of 12.7 mm dia NP push cock 1st quality including all labour charges for all operations for extra completing for finished item of work.

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FR / FLRS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes KEI / Polycab/ Havells/GM/Million?HPL/ Gold Medal/ Power Flex/ RPG/ Anchor/ Sun cab/ fortune Art/ Great white with run of 1 of 1.0 Sq.mm including cost and conveyance of all materials to site, labour charges and sales tax etc.,complete for finished item of work.

Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR P.V.C. insulated ISI Copper Cable GM/L&T/RPG/Havells/V-Guard/Power Flex/Polycab/Gold Medal/ Standard /Milion / Vimal/ Suncab/ Paragaon / FortuneArt make in the existing metallic / non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings.

Supplying and fixing of 6W LED Slim Panel Round/Square suitable for Recessed/Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS:P 15885 (Part2/Sec 13) : 2012 operating Voltage-Venture ran GE-Venture of 150 to 265 Volts AC, P.F. 0.9 surge Venture protection: 2 KV, THD10% with high power LED's having efficacy of 120 lumins/watt, CCT 3000K-5700K, minimum CRI 70, etc., complete a) Luminaire make: Philips /Lighting Technologies (LT)/GE-Venture/Crompton/Wipro/Bajaj/Havells/Halonix/Jaquard/HPL b) LED MAKE: PHILIPSlumileds/Cree/NICHIA/OSRAM/ SAMSUNG including all labour charges etc.,complete for finished item of work.

Supply and fixing of 1 X 36/40W Patty type tubel light luminaried powder coated CRCA sheet steel housing with copper chokes and all standard accessories of makes Cromption/Bajaj/Surya/ HPL/ Havells/Fortune including giving connection and all labour chrges etc., complete for finished item of work.

Supply and errecting ceiling fan of Crompton/Orient atomake as per IS 374-1979 and with 3 bldes and double ball bearings and with condenser AC 250V 50 C/S of 48 1200mm sweep completely errected in position with regulator canopy down rod upto 301 including cost and conveyance of all materials to site, labour charges and sales tax etc.,complete for finished item of work.

TOTAL NUMBER OF ITMES 24 (TWENTY FOUR NUMBERS)