Tribal Welfare Engineering Department Tender

Providing HYSD bars (Fe-415) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc.,and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per technical specification MoRT&H 1600&2200 (4th revision) and 1002, 1005,1010, 1202 MORD and as per I.S.1786 of 1985 complete for finished item of work for Substructure.

Construction of RCC railing of M25 grade using HBG crushed stone aggregate of size not exceeding 20 mm and fine aggregate conforming to table 1000-2 true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical posts not to exceed 2000mm, leaving adequate space between vertical posts for expansion including cost conveyance of all materials to site and seignorage charges, labour charges for centering, machine mixing, laying concrete in position, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution, excluding cost of steel and its fabrication charges as per approved drawings and technical specifications per MoRT&H 2703,1500,1600,1700(4th revision) and 800,900 and1208.3 MORD complete for finished item of work as per standard plans of MORTH vide drawing No.SD/202

Vibrated reinforced Cement Concrete M15 grade using 40mm,20mm & 10mm HBG machine crushed stone aggregate conforming to table 1000.1 and fine aggregate conforming to table 1000.2) including cost, seigniorage and conveyance of all materials to site and all labour charges for machine mixing, laying in position, compacting, vibrating and curing including all other incidental and all other operational charges of T&P required etc, as per techinical specification MORTH & H 1500,1700,2100 and 802, 803,1202 &1203 MORD complete for finished item of work for footings, Abutments, Piers, Wing walls and Raft foundations.

Providing Plain Cement Concrete (1:3:6) mix M10 Grade using 40mm (SS5) size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost and conveyance of all materials to site, seigniorage charges and labour charges for centering, machine mixing, laying concrete in position, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., as per technical specification MoRT&H 1500, 1700, 2100 (4th Revision), and 802, 803, 1202 and 1203 MORDas directed by the Engineer-in-Charge complete for finished item of work for levelling course

Vibrated reinforced Cement Concrete M25 grade using 20mm & 10mm HBG crushed stone aggregate conforming to table 1000.1 and fine aggregate conforming to table 1000.2) including cost, seigniorage and conveyance of all materials to site and all labour charges for machine mixing, laying in position, compacting, vibrating and curing including all other incidental and all other operational charges of T&P etc, complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MORTH specification 1500,1600,1700,2200( 4th revision) and 800,1205.4 &1205.5 MORD and as directed by the Engineer-in-Charge for Bed blocks..

Construction of un-reinforced, dowel jionted at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregate conforming to IS:383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weight batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continious operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, with water finishing to lines and grade as per drawing and technical Specification Clause 1501 MORD.

Earth work excavation by mechanical means for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 Mt, dressing of sides and bottom and backfilling in trenches with excavated suitable material and seigniorage charges complete for finished item of work as per Technical Speicification 305 MORD/304 MORTH

Vibrated reinforced Cement Concrete M15 grade using 40mm,20mm & 10mm HBG machine crushed stone aggregate conforming to table 1000.1 and fine aggregate conforming to table 1000.2) including cost, seigniorage and conveyance of all materials to site and all labour charges for machine mixing, laying in position, compacting, vibrating and curing including all other incidental and all other operational charges of T&P required etc, as per techinical specification MORTH & H 1500,1700,2100 and 802, 803,1202 &1203 MORD complete for finished item of work for body walls, Abutments, Piers, Wing walls.