Transmission Corporation Of Andhra Pradesh Limited Tender

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 415 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work For SWITCH YARD WORKS

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. FOR PLINTH BEAMS

Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work (with scaffolding charges)

Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work For Masonry works below 1.2m height (without scaffolding chares)

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Plastering with CM (1:5), 20 mm thick to the Uneven wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, Scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (paints of make Asian, Berger, Nerolac,JK/Essar/Sheenlac)

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (paints of make Asian, Berger, Nerolac,JK/Essar/Sheenlac)

Supplying and fixing colour coated Jindal JSW colour on +A2 150GSM, 0.5mm, GALVALUME material, Jindal make sheets, sheet width 3.5 feet and length 23feet with regulat range colours and including L- Flash at crown, including cost and conveyance of all materials, labour charges for fixing with J bolts, washers etc complete for finisged item of work as directed by the Engineer incharge.

Supply and fixing of roof exhausters of JSW poly carbonate make, including cost and conveyance of material, fixing charges on roof with all leads and lifts etc., complete for finished item of work.

Levelling by filling with borrowed gravel by mechanical means including cost & conveyance of gravel, depositing the soils in filling areas , spreading soils, breaking clods, sectioning and consolidation with three wheel 8 to 10 MT static Road Roller @ OMC to meet requirement as per standard specification , including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per (Payment will be made based on level for finished item of work).

Laying of Cement Concrete (1:4:8) mix using 50% of 40mm size and 50% of 20mm HBG machine crushed metal for bed flooring including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Flooring plastering with CM (1:3) 12mm thick and finishing smooth to the required slope and thread lining for flooring including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls ,) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push & pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108.

Supply and fixing of readymade cement jally, including cost and conveyance of material, fixing charges in the wall with all leads and lifts etc., complete for finished item of work.

Supply and fixing of polished Black Kadapa Slabs of all sizes between 25- 30mm thickness for cup boards including cost and conveyance of all materials, all leads and lifts complete as per the directions of the Engineer in charge for the finished item of work.

Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 300 x 300 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.(tiles should be of make Johnson/ Kajaria/ Nitco/ AGL/Cera )

Wiring with 2 runs of 1.5 Sqmm ISI marked FRSLS/ FRLS-H/ HFFR/ ZHFR PVC insulated flexible opper cables 1100V grade as per IS:694/ 1990 & IS: 17048/ 2018 specifiation for copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR(Anushakthi) in existing conduit pipe of 20/25mm dia 1.5mm thick, with 6A/10A 1 way 1 Module Modular switch of makes Legrand (Mylinc)/ Crabtree Verona / Lauritz Knudsen (Formerly L&T)/ HPL/ SchneiderLivia/ GM- (G NINE/ GX) C&S/ Goldmedal (Curve/ Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90 series/ Precision( Series 5)/ Koncept (Samrat/ Qura)/ / Polycab (Levana / IndoAsian/ Pointer/ CPL/Kolors/ Vihan/ Hosper/ Vimal/ DEC (Unicus)/ Fybros/ Infinity/ Elleys (e-soft) , and 3 plate Ceiling Rose of makes: GMG Home/ Gold Medal Olive/ Million Zoom/ Greatwhite Omega/ Koncept/ Vimalopel/ Anchor/ Vihan/ CPL/ Havells Reo/ Elleys with modular cover frame covering to hot dipped galvanized 20/18SWG module switch board including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. 25mm x 12 mm height

Supply and fixing of 48" (1200mm) Sweep star rated ceiling fan with double ball bearings air delivery more than 200Cum/Min of makes: Crompton HS Plus / Havells ES PLUS/ Orient Energy Star/ Halonix (Zephyr)/ Polycab (Synergy 50 ISI) / G.M. (Air Wave Premium)/ Bajaj - Edge/ Arcline (Glacier) models with suitable down rod covered with flexible pipe, 2 module modular type electronic Stepped type fan regulator ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura)/ Polycab (Levana / IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ imal/ DEC(Unicus)/ Fybros/ Infinity make) with all standard accessories including cost of all fittings and fixtures, labour for fixing at all positions of building giving electrical connections with necessary tools complete as directed by the Engineer in charge for finished item of work.

Supply and fixing of 20W, not less than 1100mm length LED batten light and all standard accessories of makes Wipro / G.E. / Phillips / Crompton / Bajaj/ Havells/ HPL/ Halonix on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

GST 18%