Transmission Corporation Of Andhra Pradesh Limited Tender

Plain Cement concrete - Nominal Mix (1:3:6) with 12 to 20mm (50% each) HBG metal with necessary form work including cost and conveyance of all materials, machine mixing, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Plastering with CM (1:5), 20 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, Scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS.

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS.

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12.5mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete.19mm / 20mm x 12.5 mm height

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12.5mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. 25mm x 12.5mm height

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12.5mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. 30mm/ 32mm x 12.5 mm height

Wiring with 2 runs of 22/0.30 (1.5 Sqmm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) : Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make in existing conduit pipe of 20/25mm dia 1.5mm thick, with 6A/10A 1 way 1 module modular switch (Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/Kolors/ Vihan/Hosper/ Vimal make), Ceiling rose and modular cover frame covering to hot dipped galvanized 20/18SWG module switch board including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and Run of 2 of 4.0Sqmm .FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells/KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for Mains from Distribution board to Lighting point Board.

Supply and Run 2 of 2.50Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible copper cable (Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing of 4 Way SPN DB with IP 20 Protection as per IS:13032 and suitable for 4Nos S.P out goings and for 1 No Incommer etc complete of makes Siemens/ ABB/ Standard / Havells/ HPL/ Hager/ Indo Asian / C&S / L&T/ GM / Gold Medal make) with IP-20 protection suitable for single Phase ELCB/ RCCB/ DP Isolator (ABB- S200/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T-Exora/ GM / Gold Medal/ Anchor/ Salzer) as incomer and 10KA SP MCBs (ABB- S200/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T-Exora/ GM / Gold Medal/ Anchor/ Salzer make) as out-going including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for surface/ flush mounting.

Supply and fixing of fluorescent tube light fixtures of single tube 1 X 36/ 40Watts Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessories of makes Wipro / G.E. / Phillips / Crompton / Bajaj/ Havells/ HPL/ Halonix and 1 No. 36/ 40 W tube (Phillips / Crompton / Bajaj / Surya / Style Lamp / Capart make) on Teak Wood Block on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of 6A/10A 3/2 pin 2 Module Modular socket with shutter (: Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/Koncept (Samrat/ Qura) / Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vimal make) with 6A/10A 1 way 1 Module Modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of 16A/6A 1 way combi socket modular switch with shutter ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura) / Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vima make) with 16A/20A 1 way 1 Module Modular switch control on a separate metallic box of size 200x150x60mm made of 18SWG sheet steel box coated with two coats of zinchromate redoxide with 1 or 2 module cover frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of HID / batten holder / slanting holder (Wipro/G.E./Phillips) in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W Fluorescent bulb (Wipro/G.E./Phillips) (for new installation) with all labour charges, Material etc., complete as per the directions of the Engineer in charge at site.

Supplying and fixing TV Shape mirror with PVC frame size 609.6x457.2mm including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing of 40mm thick (0.457x0.457m) polished Kadapa Slabs for cup boards including cost and conveyance of all materials, all leads and lifts complete as per the directions of the Engineer in charge for the finished item of work.

White washing two coats with white cement of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work.

Clearing THICK jungle growth (less than 50 percent open space) including bushes up to 30 cm /parthenium and other weeds including burning or disposing off the same as directed by Engineer in charge for the finished item of work.

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent for Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

white colour casement/Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent.(Casement door with 3D hinges made of (big series) frame 67x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.)

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 415 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and Fixing of 180 GSM LDPE sheet of approved make over slabs and beams centering before placing of Steel reinforcement to avoid slurry leakage and to avoid honeycomb, including labour charges for laying the sheet neatly, cutting and jointing the sheet properly with overlapping of 20cm at joints with Fevicol & Tape and for tying in position with binding wire, removing sheet while removing the centering including cost & conveyance of all materials, tools at all leads and lifts etc complete as per the directions of the Engineer in charge for the finished item of work.

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. FOR SLABS (upto 150mm thick) with steel centering Ground Floor

Dismantling of existing Brick masonry including clearing away and carefully stacking materials useful for re use and all debris 100M away from the site with labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling the existing RCC by mannual means and carefully stacking the reuseful material at site and disposing the unserviceable metraial to any remote place 1000 mts distance away from site with all leads and lifts includung cost of T&P ,labour and as per the directions of the Engineer-in - charge for finished item of work.

Plain Cement concrete - Nominal Mix (1:3:6) with 12 to 20mm (50% each) HBG metal for bed concrete including cost and conveyance of all materials, machine mixing, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Supply and fixing of decorative gate lamps to the gate of sub station including cost and conveyance of materials, and labour charges complete as directed by the Engineer in charge for the finished item of work.

Supply and transportation of ......90 W... LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy 120 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I

GST