Transmission Corporation Of Andhra Pradesh Limited Tender

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 415 grade as per IS 1786-1979) of any ISI make, different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work For SWITCH YARD WORKS

RCC M- 20 Nominal mix (Cement 400 kgs) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work .For septic tank of EE/TLC

Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 110mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 75mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls ,) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing of door frame made of hollow extruded PVC section (Nandi or equivalent) having dimensions of 40 X 57mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be metre-cut/ welded. PVC DOOR FRAME (Nandi or equivalent ) and door shutters made of rigid PVC extruded hollow section (Nandi or equivalent ) of 20mm X 200 mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements. The shutter frame is made of 30mm X 79mm with the wall thickness of 1.5mm +/-0.15mm section mitre-cut and joined at 4 corners with 125mm X 225mm plastic brackets. The shutter shall be horizontally reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed onto the door shutter.PVC DOOR SHUTTER (Nandi or Equivalent). including fixtures like Aluminium Butt hinges (IS:205)- 75 mm ,MS-Powder Coated Door Handles (IS:208) 150 mm, Aluminium Tower Bolt-10 mm Bolt (IS:204) 100 mmand MS-Powder Coated Aldrops (IS:2681) 200 mm.

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent for Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness and Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.0 mm.

Supply, Transportation and installation of Desktop with fully loaded software as desired, with the following configuration. Makes : HP ProDesk or its equivalent in Dell/Lenova 1. Processor:Intel® Core™ i5-10th Generation or Higher version processor with Intel® HD Graphics 630 (2.9 GHz base frequency with Intel® Turbo Boost Technology, 8/12 MB cache) Intel Chipset 2. Memory: 8 GB DDR4-2400 SDRAM (1 x 8 GB) 3. Hard drive 1 TB 7200 rpm SATA 4. HP Monitor : 18.5”/19.5" with TCO 7.0 or its equivalent in Dell/Lenova 5. DVD:RW 9.5MM Optical Disk Drive, 1 audio line in; 1 audio line out; 1 HDMI; 1 RJ-45; 1 VGA; 4 USB 3.0; 4 USB 2.0 6. Operating Systems: Preloaded Windows 10 professional 64 bit with product key License. However, the product key should be mentioned in the installation report at the time of installation. 7. Preloaded with latest version of Antivirus Symantec/ McAfee / NOD32 / eTrust / Avast Internet Security / Kaspersky / Quickheal / eScan / Msecure with following features: Antivirus, Antispyware, Instrusion Prevention Browser protection with single management console with 3 year subscription with support updates and patches. 8. Accessories: With required connecting cables and driver media should be supplied. 9. Warranty: 3 Year Standard On-Site Comprehensive Hardware Warranty (including O.S support, Spares- Parts/Service/Labour/On-site)

Supply, Transportation and installation of Printer Make : HP LaserJet 1020 Plus Printer (OR) It's Equivalent in Canon /Epson. Features: Print technology Laser Duty cycle (monthly, letter) Up to 5000 pages Recommended monthly page volume 250 to 2000 Duty cycle (monthly, A4) Up to 5000 pages print Print speed black (normal, letter) Up to 15 ppm Print speed black (normal, A4) Up to 14 ppm Duplex printing Manual (driver support provided) PROCESSOR Processor speed 234 MHz PAPER HANDLING Envelope feeder No Paper trays, maximum 1 (plus single-sheet priority input slot)

Supply & Fixing PVC soap trays with tooth brush holders complete and fixing in all positions of building as directed by site engineer for finished item of work.

Supplying and fixing TV Shape mirror with PVC frame size 609.6x457.2mm including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Supplying & Fixing 550x400 mm- single C.P. Pillar cock Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 300 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing Pedestal for wash hand basin (HSW/ Parry/ Earthenware ) make including cost of all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing white glazed flat back Bowl urinal basin (Indian type) of size 440x 265x 315mm of HSW/ Parry/ Neycer make including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing white glazed URINAL PARTITION of HSW/ Parry/ Neycer make of size 900mm long and 450mm wide including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing of 12" (300 mm) ISI, 900 RPM heavy duty exhaust fan with metallic blades with mark ( Crompton / Almounard / Havells Ventil Air-DB makes) including cost and conveyance of all fixtures, fittings, labour for fixing in wall inclding making holein wall with necessary connections at all positions of building complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parry ware make with WHITE colour glazed with 'S' trap, Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 8 Litres capacity single Flush and external fixtures complete as per the approved colour and directions of the Engineer in charge for the finished item of work.

Chipping, scrapping on roof slab top/loose ceiling plaster /damaged plastered surface must be clean till the hard and sound strata is exposed duly removing clean from dirt, dust and other contaminations by power grinding wire brushing , air blower & jet water cleaing before treatment including scaffolding charges, carefully stacking materials useful for re use and clearing all debris 1.0KM away from the site with initial lead & lift labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Cleaning the surface for water proof treatment by the surface must be clean and sound duly removing of exisiting tretaments clean from dirt, dust and other contaminations by power grinding wire brushing , air blower & jet water cleaning including all materials and as per the directions of the Engineer in Charge

SPECIALISED FIVE LAYER SYSTEM OF WATERPROOFING TREATMENT TO THE TERRACE WITH Roofcare-prc 5 Systems or equivalent ( ROOFCARE PRC 5 (Armstrong) / ZORICOAT PFC 5 (PMCC)/ POWER SAC 5 L (EBT)/ WATERSHIELD 5 LWC a). Ist Layer Black coloured chemcial treatment : Providng and application of one coat of High bonding, flexible bituminous polyurethane blended bituminous coating with – Roofcare prc 5 systems Confiming to ASTM-G 154 -2000 or equavalent Ist Layer diluting with water at 1 : 1 ratio as a primer coat at a consumption of 200ml per Sqm. b). IInd Layer : Providing and laying of Fibre Mesh 40 GSM, with 1 Mtr width and 50mm overlap on the primed surface. c). IIIrd Layer Grey coloured coating : Providing and application of one coat of Acrylic rubberized elastomeric flexible waterproof grey coating with – Roofcare prc 5 systems ASTM-C 836 or equavalent or equavalent diluting with 50% of water at a consumption of 400ml per Sqm. d) IVth Layer white colured coating : Providing and application of one coat of High solid, cold applied, Fibre reinforced acrylic elastomeric waterproof membrane off white coating –Roofcare prc 5 systems Confiming to ASTM-G 154 -2000 or equavalent coating (add the water upto 200ml ) (Consumption of 350ml per Sqm ). e) Vth Layer super white reflective coating : Application of one coat of 100% pure acrylic solar reflective pure white coating withRoofcareprc 5 systems Confirming to ASTM -C 297 or equavalent solar refective coating diluting with 20% of water (Consumption of 300ml per Sqm ).including cost and conveyance of all materials, labour charges etc complete for the finished item of work. Note : THE ABOVE TREATMENT WILL BE GUARANTEED FOR 5 YEARS

SPECIALISED POLYURETHANE SEALANT TREATMENT to the cracks over the terrace including a). Making ‘’U” Groove (width and depth of 6mm x 6mm) and b). Filling of the groove with polyurethane sealant – ROOFSEAL PU (Armstrong ) / POWER n SEAL PU (EBT) / THIOFLEX 600 (Fosroc) / ZORISEAL PU (PMCC) / SIKAFLEX PRO -3 WF (Sika ) WATERSHIELD PU 3 including cost and conveyance of all materials, labour charges etc complete for the finished item of work.

Providing and fixing in position at all levels of the building and against walls UPVC pipes (SCH 40) as per ASTM D-1785 of Astral / Prince / Supreme / ashirvad or any ISI brand make for water supply line to earth pits / toilets including cost and conveyance of pipe, specials such as elbows, Tees concealing same in walls and floors by cutting 32/ 25/ 20/ 15mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work 25 mm dia Nominal Bore

Providing and fixing in position at all levels of the building and against walls UPVC pipes (SCH 40) as per ASTM D-1785 of Astral / Prince / Supreme / ashirvad or any ISI brand make for water supply line to earth pits / toilets including cost and conveyance of pipe, specials such as elbows, Tees concealing same in walls and floors by cutting 32/ 25/ 20/ 15mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work 20 mm dia Nominal Bore

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with of 500 liters Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks etc complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them at departmental stores ( By departmental Vehicle) and disposing the unserviceable metraial away from site premises by contractors own transport as specified and directed by the engineer-in - charge.

Dismantling of existing Brick masonry including clearing away and carefully stacking materials useful for re use and all debris 100M away from the site with labour charges, T&P complete as per the directions of the Engineer in charge for the finished item of work.

Dismantling of the existing Tiles including clearing away and carefully stacking materials useful for reuse and all debris 100M away from the site with lead & lift labour charges, T&P complete as per the directions of the Engineer-in-charge for the finished item of work.

Supply and fixing of 40mm thick (0.457x0.457m) polished Kadapa Slabs for cup boards including cost and conveyance of all materials, all leads and lifts complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing long body C.P. Taps including cost and conveyance, labour charges complete as per the directions of the Engineer in charge for the finished item of work.

Cleaning of waste and excreta in the existing old septic tanks in the quarters premises by hiring septic tank cleaners including hire charges labour etc., with all leads and lifts complete as per the directions of the Engineer in charge for the finished item of work.

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Continental series, Chrome Finish with 7 years warranty complete as per the directions of the Engineer in charge for the finished item of work.

Supply & Fixing of 25W single tube of 4' length LED batten as directed by site engineer for finished item of work.

GST 18%