Transmission Corporation Of Andhra Pradesh Limited Tender

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. Footings

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. Plinth beams

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. COLUMNS with Steel scaffolding GROUND FLOOR

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. LINTELS with steel scaffolding GROUND FLOOR

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. SUNSHADES (0.60 M X (0.075M avg thick) X1M Ground Floor (Steel Centering)

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. BEAMS with Steel Centering GROUND FLOOR

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. SLABS (upto 150mm thick) with steel centering Ground Floor(AVG thk 125mm)

Construction of RR Masonry in CM (1:6) using hard CRS, rough granite stone and bond stones (0.16 cum) including cost and conveyance of all materials., labour charges, water lead , Curing, all leads and lifts etc., complete for finished item of work as per directions of the Engineer-in-charge.

Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work

Plain Cement concrete - Nominal Mix (1:3:6) with 12 to 20mm (50% each) HBG metal for encasing/ embedding the structural steel supportng 'Y' angles with necessary form work including cost and conveyance of all materials, machine mixing, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door(an old removed door avaialble with DEE/Main, hence this data excludes cost of door but includes cost of door closure and door stopper and labour)

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent for Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work.

Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Plastering with CM (1:5), 20 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, Scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Plastering to Uneven surfaces of RR /CR, PCC with CM (1:5) 20mm. thick including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. ( with out scafolding)

Laying of Cement Concrete (1:4:8) mix using 50% of 40mm size and 50% of 20mm HBG machine crushed metal for bed flooring including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified polished floor tiles 600X600 of 8 to 10mm thick length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work.

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS.

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS.

Providing and fixing of false ceiling in true horizontal level 600 mm x 600 mm, 15 mm thick Mineral Fibre sheet 600 x 600 of fissured-ANF (Board / Tegular) Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance 80%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 using hot dipped Galvanised Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stiched cross tee of size 24 x 27 mm at evry 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fiber Board including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete as per the directions of the Engineer in charge for the finished item of work. ( Recommended brands: ARMSTRONG, Insula etc)

Supply and fixing of polished Black Kadapa Slabs of all sizes between 25- 30mm thickness for cup boards including cost and conveyance of all materials, all leads and lifts complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls ,) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Providing and fixing in position at all levels of the building under floors and against walls 110mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.

Supplying and fixing 110mm dia PVC bends including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.

Wiring with 2 runs of 22/0.30 (1.5 Sqmm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) Finolex / RR kabel / Havells /KEI make in existing conduit pipe of 20/25mm dia 1.5mm thick, with 6A/10A 1 way 1 module modular switch (Legrand Myrius / Crabtree Murano / L&T/ HPL/ Schneider Livia/ GM- Zicono/ C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90 series/ Precision/ Koncept (Samrat/ Qura)/ Ploycab (Levana)/ Anchor-Roma/ Amron/ IndoAsian/ Pointer make), Ceiling rose and modular cover frame covering to hot dipped galvanized 20/18SWG module switch board including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and fixing of 1200mm (48") Sweep star rated ceiling fan with double ball bearings air delivery more than 200Cum/Min of makes:standard make Crompton HS Plus / Havells ES PLUS/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium) models with suitable down rod covered with flexible pipe, 2 module modular type electronic Stepped type fan regulator ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura)/ Polycab (Levana / IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ imal/ DEC(Unicus)/ Fybros/ Infinity make) with all standard accessories including cost of all fittings and fixtures, labour for fixing at all positions of building giving electrical connections with necessary tools complete as directed by the Engineer in charge for finished item of work.

Supply and fixing of HID / batten holder / slanting holder (Wipro/G.E./Phillips) in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W Fluorescent bulb (Crompton/Bajaj/Phillips) (for new installation).

Supply and fixing of 20W, not less than 1100mm length LED batten light and all standard accessories of makes Wipro / G.E. / Phillips / Crompton / Bajaj/ Havells/ HPL/ Halonix on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Supply and fixing of 16A/6A 1 way combi socket modular switch with shutter (Legrand Myrius/ Crabtree murano/ L&T/ HPL/ Schneider Livia/ GM-(G NINE/GX)/ C&S/ Gold Medal (Curve/Air)/ Million Mway/ Logus Platina/ Panasonic Vision/ Salzer S90 Series/ Precision/ Koncept (Samrat/Qura)/ Polycab (Levana)/ Anchor- Roma/ Amron/ Indoasian/ Pointer make) with 16A/20A 1 way 1 Module Modular switch control on a separate metallic box of size 200x150x60mm made of 18SWG sheet steel box coated with two coats of zinchromate redoxide with 1 or 2 module cover frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and fixing of 6A/10A 3/2 pin 2 Module Modular socket with shutter (Legrand Myrius/ Crabtree murano/ L&T/ HPL/ Schneider Livia/ GM-(G NINE/GX)/ C&S/ Gold Medal (Curve/Air)/ Million Mway/ Logus Platina/ Panasonic Vision/ Salzer S90 Series/ Precision/ Koncept (Samrat/Qura)/ Polycab (Levana)/ Anchor- Roma/ Kolars/vihan/hosper/Vimal make) with 6A/10A 1 way 1 Module Modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.

Supply and Run of 4 of 56/0.30 (4.0Sqmm) FR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells /KEI make) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for Mains from Distribution board to Lighting point Board.

Supply and fixing of 4 Way SPN DB with IP 30 Protection as per IS:13032 and suitable for 4Nos S.P out goings and for 1 No Incommer etc complete of makes ABB/ Standard / Havells-euro II / C&S / Lauritz Knudsen (Formerly L&T)/ GM / Gold Medal/ Salzer/ Polycab/ Million/ Benlo/ BCH with IP-30 protection suitable for single Phase supply of 40A, DP Isolator of makes as incomer and 10KA-6-32A range SP_ MCBs of make ABB- S200/ Standard / Havells-euro II / C&S / Lauritz Knudsen (Formerly L&T)-Exora/ GM/Gold Medal/ Salzer / Polycab/ Million/ Benlo/ BCH as out-going including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for surface/ flush mounting.

Supply and Run 2 of 36/0.30 (2.50Sqmm) FR PVC insulated flexible copper cable (Finolex / RR kabel / Havells /KEI make) in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Supply and fixing in position 32A 240V SPN rewirable Fuse Switch in SS Enclosure as per IS (HPL/ Havells/ Standard/ Indoasian make) and including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.

Providing independent earthing by excavating a trench to a depth of 2.1m in all soils, as per size specified in the data, using 40mm dia 'B' class GI pipe of 2.5m length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12.5mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. 19mm / 20mm x 12.5 mm height

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12.5mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. 25mm x 12.5mm height

GST 18%