Transmission Corporation Of Andhra Pradesh Limited Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Transmission Corporation Of Andhra Pradesh Limited - APTRANSCO Tender
Civil And Construction
Building Construction
Opening Date18 Jan 2024
Closing Date6 Feb 2024
Tender Amount₹ 4,08,32,327
Costs
EMD
₹ 8,16,647Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
706335Bid Award Id
ViewTender No
TS No. 11/2023-24 of CE/Civil/VS/VJATender Authority
Transmission Corporation Of Andhra Pradesh Limited ViewPurchaser Address
-Website
http://www.aptransco.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Site investigation for locating bore well point
1
1260
1260
... More
Drilling of Borewell by Down The Hole (DTH) hammer drilling to a finished dia of 165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc., and drilling in overburden to dia not less than 200mm etc and reaming the borewell to suit insertion of suitable Casing pipe etc., including insetion of casing pipe with couplings, caps and any other relavent materials upto required depth as directed by the department including transporatation of drilling rigs and supporting vehicle and including bore development (Flushing of Borewell at an average pressure of 150 PSI) conducting yield test, consumable charges, crew charges required for fixation of pipe assembly completely done to the satisfaction of the department and including all albour charges , but excluding the cost of casing pipe, couplings, cap etc., the entire work should be carried out as per IS-2800 part I & II 1979 and amended time to time (A) UPTO 90.0 RM
90
42184
468.72
... More
Drilling of Borewell by Down The Hole (DTH) hammer drilling to a finished dia of 165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc., and drilling in overburden to dia not less than 200mm etc and reaming the borewell to suit insertion of suitable Casing pipe etc., including insetion of casing pipe with couplings, caps and any other relavent materials upto required depth as directed by the department including transporatation of drilling rigs and supporting vehicle and including bore development (Flushing of Borewell at an average pressure of 150 PSI) conducting yield test, consumable charges, crew charges required for fixation of pipe assembly completely done to the satisfaction of the department and including all albour charges , but excluding the cost of casing pipe, couplings, cap etc., the entire work should be carried out as per IS-2800 part I & II 1979 and amended time to time (B) From 90.00RM to 150.0RM
30
15044
501.48
... More
Supplying & fixing of PVC heavy duty casing pipe of 180 mm dia, 10kg/sqcm for the above Bore hole including cost & conveyance of all materials ,labour ,leads, and lifts complete as per the directions of the Engineer in charge for the finished item of work
30
37260
1242
... More
Supplying & fixing 32 mm Nominal Bore UPVC pipes (SCH 40) as per ASTM D-1785 of Ashirvad / Finolex/ Waterflo/ Sudhakar or any ISI brand make with fittings including the cost of pipe & its fittings & labour charges , leads, and lifts complete as per the directions of the Engineer in charge for the finished item of work.
150
41580
277.2
... More
Supplying & fixing 1 1/4" (32 mm) dia HDPE pipe (12.5kg/Sqcm) PE-100 grade of approved quality & make including nipples, bends, couplings etc., complete for finished item of work from bore well to delivery including cost & conveyance of all materials, specials/fixtures and fittings labour charges, leads, and lifts complete as per the directions of the Engineer in charge for the finished item of work.
150
10401
69.34
... More
Supply and fixing of MS Bore cover duly painted suitable for 8" dia casing pipe including cost & conveyance of all materials and fittings and leads complete as per the directions of the Engineer in charge for the finished item of work.
2
380
190
... More
Supply and fixing of MS clamps 1.0No SET suitable for 32mm dia GI pipe including cost & conveyance of all materials and fittings and leads complete as per the directions of the Engineer in charge for the finished item of work.
2
853
426.5
... More
Supplying & fixing of 3 core 2.5 Sqmm Flat copper cable for submerciable motors of make V-Guard/ Gold medal/ GM/ Million/ Vimal/ Fine Cab/ Orbit/ CRI/ Tamra/ Airso/ Ollvin/ Avocab/ Anchor make and as approved by the Engineer in charge for submersible motor including cost & conveyance of all materials, labour charges, leads complete as per the directions of the Engineer in charge for the finished item of work.
200
17850
89.25
... More
Supply, Transportation and fixing of 3HP, 5 to 10 stage, 5 star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 (of makes Kirloskar / Crompton / Texmo / CRI / KSB/ Lubi/ PSG/ Aryen Varsha), with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well including cost & conveyance of all materials, labour charges and Fabrication, Transportation and supply of wall mounted control panel board of size 600x 600x 250mm made of 18SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of red oxide primer and two coats of Grey paint, lock and key arrangements two side louvers with weld mesh inside etc complete consisting of 1 No Volt meter 0-500V 96x96mm size and 1 No 0 to 20Amps / 0to 50 Amps Ammeter (96x96mm size) of L&T/ C&S/ SALZAR/ HPL/ AEI/ Meco/ Rishab, 1 No Single phase preventor of suitable range of makes L&T/ Minilec/ Powertec etc, 1 No 32A TP, 10KA MCB of Legrand/ Schneider make, 1 Set of indicateion lamps (R-Y-B) with switch control, 2Nos Voltmeter & Ammeter selector switch, supply and fixing of ISI mark suitable capacitor of L&T / Siemens/ Schneider/ Epcos/ HAvells make for pumps of capacity upto 7.5HP with DOL starter of makes C&S/ Crompton/ L&T/ Siemens/ BCH etc., complete suitable including nuts & bolts etc complete as per the directions of the Engineer in charge for the finished item of work.
1
43680
43680
... More
Earthwork excavation in all types of soils (up to stone matrix)which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry, wet and slushy etc. covering initial lead and lift etc and backfilling the foundations (after laying foundations) with excavated earth complete as per the the directions of the Engineer in charge for the finished item of work.
1650
338052
204.88
... More
Laying of Cement Concrete (1:4:8) mix using 40mm size HBG Machine crushed metal for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.
73
385495
5280.76
... More
Laying of Cement Concrete (1:4:8) mix using 50% of 40mm size and 50% of 20mm HBG machine crushed metal for bed flooring including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.
50
278033
5560.66
... More
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 415 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
58
4801155
82778.55
... More
Supply and Fixing of 180 GSM LDPE sheet of approved make over slabs and beams centering before placing of Steel reinforcement to avoid slurry leakage and to avoid honeycomb, including labour charges for laying the sheet neatly, cutting and jointing the sheet properly with overlapping of 20cm at joints with Fevicol & Tape and for tying in position with binding wire, removing sheet while removing the centering including cost & conveyance of all materials, tools at all leads and lifts etc complete as per the directions of the Engineer in charge for the finished item of work.
2000
70400
35.2
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (A) FOR FOOTINGS
135
1403649
10397.4
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (B) FOR PEDESTALS/PILE CAPS
50
550161
11003.22
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (C) FOR PLINTH BEAMS
72
793360
11018.89
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (D) FOR COLUMNS with Steel scaffolding GROUND FLOOR
36
495505
13764.05
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (E) FOR COLUMNS with steel scaffolding FIRST FLOOR
21
304732
14511.06
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (F) FOR COLUMNS with steel scaffolding SECOND FLOOR
8
122064
15258.07
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (G) FOR LINTELS with steel scaffolding GROUND FLOOR
24
327336
13639.02
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (H) FOR LINTELS with steel scaffolding FIRST FLOOR
15
214309
14287.32
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (J) FOR LINTELS with steel scaffolding SECOND FLOOR
3
44806
14935.62
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (K) FOR BEAMS with Steel Centering GROUND FLOOR
33
408952
12392.49
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (L) FOR BEAMS with Steel Centering FIRST FLOOR
30
386909
12896.99
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (M) FOR BEAMS with Steel Centering SECOND FLOOR
5
67007
13401.49
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (N) FOR SLABS (upto 150mm thick) with steel centering Ground Floor
75
844740
11263.2
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (O) FOR SLABS & STAIR CASE SLABSin FIRST FLOOR
77
901516
11708.01
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (P) FOR SLABS & STAIR CASE SLABSin SECOND FLOOR
9
109375
12152.82
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (Q) FOR SUNSHADES (0.60 M X (0.075M avg thick) X1M Ground Floor (Steel Centering)
30
35041
1168.04
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (R) FOR SUNSHADES(0.75 M X(0.1M+0.075M)/2) X1M First Floor (Steel Centering)
30
36653
1221.78
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. (S) FOR SUNSHADES(0.75 M X(0.1M+0.075M)/2) X1M Second Floor (Steel Centering)
4
5102
1275.52
... More
RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm and 12mm size machine crushed hard granite metal (50% each) (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work(Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. For PRE CAST SLABS
9
87094
9677.17
... More
FOR VERTICAL WALL upto Ground level for FIRE Protection Wall & Box Culvert
7
77022
11003.22
... More
Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work (A) FOR GROUND FLOOR
165
1332082
8073.23
... More
Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work (B) FOR FIRST FLOOR
150
1283362
8555.75
... More
Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work (C) FOR SECOND FLOOR
63
569411
9038.27
... More
Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work For Masonry works below 1.2m height
98
734971
7499.71
... More
Plain Cement concrete - Nominal Mix (1:3:6) using 20mm graded HBG metal for Drain walls with necessary form work including cost and conveyance of all materials, machine mixing, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456)
115
869431
7560.27
... More
Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. (A) FOR GROUND FLOOR
950
566836
596.67
... More
Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. (B) FOR FIRST FLOOR
745
485978
652.32
... More
Plastering with CM 2 coats, 20 mm thick,base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.on the uneven surfaces of wall including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. (C) FOR SECOND FLOOR
265
187612
707.97
... More
Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. (A) FOR GROUND FLOOR
1235
536632
434.52
... More
Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. (B) FOR FIRST FLOOR
810
385835
476.34
... More
Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work. (C) FOR SECOND FLOOR
290
150266
518.16
... More
Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. (WITHOUT SCAFFOLDING)
315
132712
421.31
... More
Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. (A) FOR GROUND FLOOR
615
283152
460.41
... More
Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. (B) FOR FIRST FLOOR
690
350692
508.25
... More
Plastering with CM (1:3), 12 mm thick ceiling and projections of beams at all heights including cost & conveyance of all materials, scaffloding, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work. (C) FOR SECOND FLOOR
55
30584
556.09
... More
Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for Ground Floor. (A) FOR GROUND FLOOR
950
227031
238.98
... More
Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for Ground Floor. (B) FOR FIRST FLOOR
700
182434
260.62
... More
Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, removing projections using cutter machine applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls upto a height of 3.66m (A) FOR GROUND FLOOR
310
133303
430.01
... More
Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, removing projections using cutter machine applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls upto a height of 3.66m (B) FOR FIRST FLOOR
320
149526
467.27
... More
Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, removing projections using cutter machine applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls upto a height of 3.66m (C) FOR SECOND FLOOR
70
35317
504.53
... More
Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (A) FOR GROUND FLOOR
1520
245176
161.3
... More
Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (B) FOR FIRST FLOOR
1330
232532
174.84
... More
Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS. (C) FOR SECOND FLOOR
220
41442
188.37
... More
Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (A) FOR GROUND FLOOR
680
162452
238.9
... More
Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (B) FOR FIRST FLOOR
630
163649
259.76
... More
Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS. (C) FOR SECOND FLOOR
440
123473
280.62
... More
Providing and fixing of false ceiling in true horizontal level 600 mm x 600 mm, 15 mm thick Mineral Fibre sheet 600 x 600 of fissured-ANF (Board / Tegular) Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance 80%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 using hot dipped Galvanised Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stiched cross tee of size 24 x 27 mm at evry 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fiber Board including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete as per the directions of the Engineer in charge for the finished item of work. ( Recommended brands: ARMSTRONG, Insula etc)
100
137999
1380
... More
Providing stainless steel hand railing with 304 Grade stainless steel sections using 48.26mm OD pipes/ squares as stiles/ verticals at required intervels, 48.26mm OD pipes/ squares as hand railing/ top sloped member and 3 Nos 17.145mm OD pipes/ squares as intermediate members or any other hand railing design specified by the Engineer in Charge including fabrication of stainless steel railing works using stainless steel welding rods, buffing, polishing, lacquer finishing for seamless finish including fixing the verticals by drilling the holes in the concrete/ granite/ tiled floor, grouted with suitable Resin anchor grout such as Lockfix-S of Fosroc or any equivalent chemical including cost of all materials and labour charges for finished item of work as approved and directed by the Engineer-In - Charge.
950
599212
630.75
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.5 Sqm)
90
626400
6960
... More
Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness and Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.0 mm.
12.5
68237
5459
... More
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt - 2 Nos., 6” D handles - 2 Nos., 10” Aldrop - 1 No., Butt Hinges - 6 Nos, Mortise Lock of approved quality - 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work. for Double leaf Door
4
44000
11000
... More
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size of 45x75MM (ISI Make) with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control handdrilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. and fixing with 28-30 MM thick solid Wood Polymer Composite (WPC ) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum (ISI Make). shutter will be fixed to the frame using 3 inch hinges. A minimum of 4 hinges will be required including cost of fixtures like 4Nos. Aluminium Butt hinges (IS:205)- 75 mm , 2Nos. MS-Powder Coated Door Handles (IS:208) 150 mm, 1No. Aluminium Tower Bolt-10 mm Bolt (IS:204) 100 mm and 1No. MS-Powder Coated Aldrops (IS:2681) 200 mm, cost and conveyance of all materials, labour charges for fixing, Transportation etc., complete for finished item of work and as per the directions of the Engineer-in-charge
30
169063
5635.44
... More
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
50
526500
10530
... More
Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (A) FOR GROUND FLOOR
530
663067
1251.07
... More
Flooring with Vitrified floor tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (B) FOR FIRST FLOOR
440
574503
1305.69
... More
Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified polished floor tiles 600X600 of 8 to 10mm thick length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (A) FOR GROUND FLOOR
50
62746
1254.93
... More
Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified polished floor tiles 600X600 of 8 to 10mm thick length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (B) FOR FIRST FLOOR
40
52382
1309.55
... More
Flooring, Skirting and cladding with high polished granite 16 to 18 mm thick slabs (with full or part rounding for cladding or skirting ) other than black and regular colours set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of tilesetc., complete for finished item of work, but excluding the cost of conveyance of all materials complete as per the directions of the Engineer in charge for the finished item of work.
175
647587
3700.5
... More
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (A) FOR GROUND FLOOR
56
56907
1016.21
... More
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (B) FOR FIRST FLOOR
40
42833
1070.83
... More
Providing skirting to internal walls to 15 cm height/risers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (A) FOR GROUND FLOOR
280
157012
560.76
... More
Providing skirting to internal walls to 15 cm height/risers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water including seigniorage charges, etc., complete as per the directions of the Engineer in charge for the finished item of work. (B) FOR FIRST FLOOR
190
109145
574.45
... More
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost & conveyance charges of all materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
680
419226
616.51
... More
RCM facia 5cm thick in CM(1:3) for dropwalls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in charge with dubara sponge finishing, including cost & conveyance of all materials to site, seigniorage charges, sales & other taxes on all materials, operational & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and formwork, lift charges etc.,complete for finished items of work but excluding cost of steel & its fabrication charges, for finished item of work. (APSS No.403 & 903)
100
212795
2127.95
... More
Supplying and fixing of sun control film to the glass openings of PLCC room including cost & conveyance of all materials, labour charges, leads, lifts etc, complete as per the directions of the Engineer in charge for the finished item of work.
85
29240
344
... More
Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls ,) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.
4800
509088
106.06
... More
Supply and fixing Aluminium partition upto 2.75m height partly glazed as per drawing using standard powder coated/ Anodised aluminium sections of 63.5x38.10x2.5mm thick fitted with 12mm thick cement bonded particle boards prelaminated (both sides) top and bottom panels and middle with 8mm thick plain glass glazing fitted with suitable aluminium glazing clipss and rubber beading including cost and conveyance of all materials labour charges for manufacturing fixing in position using wooden blocks and sheet metal screw etc. to complete for finished item of work as approved by Engineer-in-charge.
425
1635803
3848.95
... More
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with of 1000 liters Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks etc complete as per the directions of the Engineer in charge for the finished item of work.
4
36000
9000
... More
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parry ware make with WHITE colour glazed with 'S' trap, Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 8 Litres capacity single Flush and external fixtures complete as per the approved colour and directions of the Engineer in charge for the finished item of work.
19
70695
3720.81
... More
Supplying & Fixing 550x400 mm- single C.P. Pillar cock Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 300 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block as per the directions of the Engineer in charge for the finished item of work.
14
26433
1888.11
... More
Supplying and fixing Pedestal for wash hand basin (HSW/ Parry/ Earthenware ) make including cost of all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.
14
17733
1266.71
... More
Supplying and fixing white glazed flat back Bowl urinal basin (Indian type) of size 440x 265x 315mm of HSW/ Parry/ Neycer make including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.
16
15336
958.51
... More
Supplying and fixing white glazed URINAL PARTITION of HSW/ Parry/ Neycer make of size 900mm long and 450mm wide including all fixtures, labour for fixing as per the directions of the Engineer in charge for the finished item of work.
10
12000
1200
... More
Supplying and fixing 19.05mm dia and 609.6mm long C.P. Towel rod of Ist quality including cost of brackets as per the directions of the Engineer in charge for the finished item of work.
24
9262
385.94
... More
Supplying and fixing NP Soap dish heavy type with NP Screws including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.
26
6159
236.89
... More
Supply & Fixing PVC soap trays with tooth brush holders complete and fixing in all positions of building as directed by site engineer for finished item of work.
20
1200
60
... More
Supplying and fixing TV Shape mirror with PVC frame size 609.6x457.2mm including cost & conveyance of materials and labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.
15
8361
557.46
... More
Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. (A) 34.9 mm OD pipe SDR 13.5
130
31327
240.98
... More
Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. (B) 28.6 mm OD pipe SDR 13.5
80
12251
153.14
... More
Supplying and fixing of Ashirvad/Ajay/Astral flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS(Copper Tube Sizes 1/2" ton 2" Ashirvad flowguard SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for hot and cold water(IS 15778:2007) for water supply line to earth pits / toilets including cost and conveyance of pipe, CPVC specials such as elbows, Tees concealing same in walls and floors by cutting 34.9/ 28.6/ 22.2/15.9 mm dia to be included grooves, packing, finishing after laying pipe in position as per the directions of the Engineer in charge for the finished item of work. (C) 22.2 mm OD pipe SDR 13.5
220
23287
105.85
... More
Providing and fixing in position at all levels of the buildings PPR Ball Valve confirming to DIN standards 8077/8092 for water services for following sizes including jointing etc complete as per the directions of the Engineer in charge for the finished item of work.(A) 32 mm dia Nominal Bore
8
1926
240.86
... More
Providing and fixing in position at all levels of the buildings PPR Ball Valve confirming to DIN standards 8077/8092 for water services for following sizes including jointing etc complete as per the directions of the Engineer in charge for the finished item of work.(B) 25 mm dia Nominal Bore
6
1373
228.86
... More
Providing and fixing in position at all levels of the buildings PPR Ball Valve confirming to DIN standards 8077/8092 for water services for following sizes including jointing etc complete as per the directions of the Engineer in charge for the finished item of work.(C) 20 mm dia Nominal Bore
5
924
184.86
... More
Supplying and fixing long body C.P. Taps including cost and conveyance, labour charges complete as per the directions of the Engineer in charge for the finished item of work.
31
9103
293.67
... More
Providing and fixing 101.6 mm dia PVC Nahani Trap/Floor trap of standard make including making connection to PVC pipes/waste water lines with cement concrete base for embedding traps in position, finishing up to floor level with water proof cement plaster with grating at top complete as per the directions of the Engineer in charge for the finished item of work.
41
10250
250
... More
Providing and fixing in position at all levels of the building under floors and against walls 110mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.
250
41375
165.5
... More
Providing and fixing in position at all levels of the building under floors and against walls 75mm dia (4kg/cm2) PVC pipes of prince / sudhakar or any ISI brand make with specials such as junctions, with or without access doors as required and fixing cowls at top wherever necessary including excavation and refilling wherever required,, testing etc. complete as per the directions of the Engineer in charge for the finished item of work.
200
19034
95.17
... More
Supplying and fixing 110mm dia PVC bends including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.
30
2503
83.46
... More
Supplying and fixing 75mm dia PVC bends including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.
20
1005
50.26
... More
Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Continental series, Chrome Finish with 7 years warranty including cost and conveyance, labour for fixing complete as per the directions of the Engineer in charge for the finished item of work.
19
58593
3083.86
... More
Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12.5mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. (A) 19mm / 20mm x 12.5 mm height
50
3237
64.74
... More
Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12.5mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. (B) 25mm x 12.5mm height
100
7974
79.74
... More
Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12.5mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. (C) 30mm/ 32mm x 12.5 mm height
75
6505
86.74
... More
Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12.5mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. (D) 38mm /40 mm x 12.5 mm height
75
8905
118.74
... More
Supply and fixing of 20 mm outer dia 1.55 mm thick mediium grade with IS: 9537 part 3 regid PVC pipe (ISI mark) (Precision/ Universal & Marudhar/ VIP / Gold Medal / Million plast / GM / Sudhakar / Anchor/ Polyline/ Polycab/ Orbit/ AKG makes) concealed in walls for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.
350
37964
108.47
... More
Supply and fixing of 25 mm outer dia 1.80 mm thick mediium grade with IS: 9537 part 3 regid PVC pipe (ISI mark) ( Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin makes) concealed in walls for wiring with all required accessories incl masonry work and labour charges etc., complete as per the directions of the Engineer in charge for the finished item of work.
250
29827
119.31
... More
Wiring with 2 runs of 22/0.30 (1.5 Sqmm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) : Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make in existing conduit pipe of 20/25mm dia 1.5mm thick, with 6A/10A 1 way 1 module modular switch (Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/Koncept (Samrat/ Qura) /Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/Kolors/ Vihan/Hosper/ Vimal make), Ceiling rose and modular cover frame covering to hot dipped galvanized 20/18SWG module switch board including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings
320
250390
782.47
... More
Supply and fixing of 12" (300 mm) ISI, 900 RPM heavy duty exhaust fan with metallic blades with mark ( Crompton / Almounard / Havells Ventil Air-DB makes) including cost and conveyance of all fixtures, fittings, labour for fixing in wall inclding making holein wall with necessary connections at all positions of building complete as directed by the Engineer in charge for the finished item of work at all levels of building.
6
25199
4199.98
... More
Supply and fixing of 16A/6A 1 way combi socket modular switch with shutter ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura) / Ploycab(Levana)/ Anchor-Roma/ IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ Vima make) with 16A/20A 1 way 1 Module Modular switch control on a separate metallic box of size 200x150x60mm made of 18SWG sheet steel box coated with two coats of zinchromate redoxide with 1 or 2 module cover frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete as per the directions of the Engineer in charge at site.
155
85673
552.73
... More
Supply and fixing of HID / batten holder / slanting holder (Wipro/G.E./Phillips) in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED bulb with input voltage 90 to 300V Makes: Phillips /Crompton / Bajaj / Havells / Halonix/GM/HPLSyska / Green Lites / Fortune Arrt / GoldMedal / Luker/Leo/Orbit /Rhino / GLO LED (for new installation) with all labour charges, Material etc., complete as per the directions of the Engineer in charge at site.
20
5386
269.33
... More
Supply and fixing of 1200mm (48") Sweep star rated ceiling fan with double ball bearings air delivery more than 200Cum/Min of makes:standard make Crompton HS Plus / Havells ES PLUS/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium) models with suitable down rod covered with flexible pipe, 2 module modular type electronic Stepped type fan regulator ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura)/ Polycab (Levana / IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ imal/ DEC(Unicus)/ Fybros/ Infinity make) with all standard accessories including cost of all fittings and fixtures, labour for fixing at all positions of building giving electrical connections with necessary tools complete as directed by the Engineer in charge for finished item of work.
60
199803
3330.05
... More
Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD70, .etc., complete for a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/ Jaquar/ HPL/ GM / GreenLites / Gold Medal/ Eveready/ Rhino/ Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ EVERLIGHT make) on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.
150
105223
701.49
... More
Supply and transportation and Fixing of 60W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F 0.90, high power LEDs having System Efficacy 100 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty.Makes: a) LUMINAIRE Makes: Syska / GM / C&S/ VIN/Gold Medal /Pharox / Cosmo / Enrich/Pro-lite(I) / Renesola / Stanjo / Goldwyn/ Ib LED/ Orbit/ Luker/Trinic/ GLO LED/ Vimal b) LED MAKE : CREE / NICHIA / OSRAM / SAMSUNG / LG.
20
108601
5430.09
... More
Supply and fixing decorative portico LED ceiling light fitting with all accessories to the ceiling of veranda including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.
10
3350
335
... More
Supply and fixing of 4 Way SPN DB with IP 20 Protection as per IS:13032 and suitable for 4Nos S.P out goings and for 1 No Incommer etc complete of makes Siemens/ ABB/ Standard / Havells/ HPL/ Hager/ Indo Asian / C&S / L&T/ GM / Gold Medal make) with IP-20 protection suitable for single Phase ELCB/ RCCB/ DP Isolator (ABB- S200/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T-Exora/ GM / Gold Medal/ Anchor/ Salzer) as incomer and 10KA SP MCBs (ABB- S200/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T-Exora/ GM / Gold Medal/ Anchor/ Salzer make) as out-going including internal connection and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for surface/ flush mounting.
25
85806
3432.26
... More
Supply and Run 5 of 10.0Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible Copper cable (Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe for run of Mains from AC panel to Main DB as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.
50
31542
630.84
... More
Supply and Run 4 of 6.0Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible Copper cable (Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe for run of Mains from AC panel to 32Amps Main switch as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.
150
53793
358.62
... More
Supply and Run of 4 of 4.0Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible Copper Cable (Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe including giving connections, all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building from AC Distribution board to Power DB
400
106232
265.58
... More
Supply and Run 2 of 2.50Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible copper cable (Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.
1200
105084
87.57
... More
Supply and Run 1 of 2.50Sqmm FRLS/ FRLS-H / HFFR PVC insulated flexible copper cable (Finolex / RR kabel / Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM make) in existing pipe for run of Mains from Main switch to Distribution board as per colour code of wires including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building.
500
21940
43.88
... More
Supply and fixing of 15W heavy duty LED Down lighter, suitable for Recessed mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265 Volts AC, P.F 0.9, SurGE-Venture protection: 2KV, THD10% with high power LED's having efficacy of 120 lumins / watt, CCT: 3000K - 5700K, minimum CRI 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete a) LUMINAIRE MAKE : Phillips /Lighting Technologies(LT) / GE-Venture / Crompton / Wipro / Bajaj/ Havells / Halonix/Jaquar/HPL/GM b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.
8
10096
1262
... More
Providing independent earthing by excavating a trench to a depth of 2.1m in all soils, as per size specified in the data, using 40mm dia 'B' class GI pipe of 2.5m length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and including giving connections and labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work.
6
26161
4360.28
... More
Supply, fixing and commissioning of 5'X2.5' Glowsign Board (BL) lettering of "TRANSMISSION CORPORATION OF ANDHRA PRADESH LIMITED, OFFICE OF THE SUPERINTENDING ENGINEER, OMC CIRCLE, ONGOLE" in suitable size and color as specified by APTRANSCO, sheet covering all 3 sides of the frame, all power supply with accessories, and all taxes for the material and labour at site and necessary tools fastenings, fittings, screws, brackets, bolts, drilling holes, making suitable scaffoldings and proportions work etc., completed for finished item of work as approved and directed by the Engineer-In-charge etc., for finished item of work.
5
13455
2691
... More
Supply and transportation of 25Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I. Makes:RPG / Finolex / Paragon / V-Guard / Suncab / Delton / Payal / Gemscab/ Orbit/Avocab/Laser/Rhino/Pawancab/LS cable including labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for Mains from Distribution boards to Lighting point boards
50
9550
191
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of 3.5 core Armoured XLPE aluminum conductor cable of 1100 volt grade for 3.5Core x 25mm Sqmm size and Makes: Dowels/ Comet/ SMI for finished item of work as directed by Engineer in charge.
2
546
273
... More
AC supply distribution board control panel board: Supply and Manufacturing of 3Ph, 440V, 50Hz, 50KA MCCB withoperated 200A incomer including fuse carrier unit & power indication lamps along with (0-500) V Voltmeter, (0-200) A Ammeter and with 4 nos outgoing feeders (63A) and with 2 nos outgoing feeders (32A). The complete power control panel dimension is (1830x 940x 356mm) for finished item of work.
1
125000
125000
... More
Supply and Fixing of 200A 415V TPN Rewirable/ Double Break Switch in SS enclosure without fuses as per IS:13947 of Makes: HPL / Havells / Standard / Indo Asian /Benlo complete for finished item of work.
1
12734
12734.11
... More
Supply and transportation of 50Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I. Makes:RPG / Finolex / Paragon / V-Guard / Suncab / Delton / Payal / Gemscab/ Orbit/Avocab/Laser/Rhino/Pawancab/LS cable including giving connections all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for Mains from Distribution boards to Lighting point boards
50
16550
331
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of 3.5 core Armoured XLPE aluminum conductor cable of 1100 volt grade for 3.5Core x 50mm Sqmm size and Makes: Dowels/ Comet/ SMI for finished item of work as directed by Engineer in charge.
2
848
424
... More
Supply and transportation of 70Sqmm 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I. Makes:RPG / Finolex / Paragon / V-Guard / Suncab / Delton / Payal / Gemscab/ Orbit/Avocab/Laser/Rhino/Pawancab/LS cable including giving connections all labour charges and cost of materials complete as directed by the Engineer in charge for the finished item of work at all levels of building for Mains from Distribution boards to Lighting point boards
40
17040
426
... More
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminum lugs duly crimped with crimping tool, PVC tape etc., for following size of 3.5 core Armoured XLPE aluminum conductor cable of 1100 volt grade for 3.5Core x 70mm Sqmm size and Makes: Dowels/ Comet/ SMI for finished item of work as directed by Engineer in charge.
2
1258
629
... More
Supply and fixing TPN Distribution board with IP-30 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going of makes ABB/Standard / Havells-euro II / C&S / L&T/GM /Gold Medal/Anchor/Salzer/Polycab including internal connection and labour charges for surface / flush mounting etc., complete. ( 40A FP Isolator/RCCB/ELCB-1 No for incomer, 10KA-6-32 A SP MCBs-12 Nos for outgoing)
1
9542
9542.29
... More
Construction of Granular sub base by providing HBG material ( 9.5 - 4.75 chips @ 66%, 2.36 mm & below @ 34%) confirming to Grading -III of MoRT T&H Table 400-2 including cost, (including seigniorage) charge and conveyance of all materias to work site and spreading in uniform layers with motor grader or by approved means,on prepared surface mixing by mix in place method with Rotavator/approved means at OMC and compatin with vibrotary roller to achieve the disired density etc,complete for finished item of work per MoRT T&H Specification 401 (5th revision) and as directed by Engineer-in-charge for finished item of work.
95
156361
1645.91
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.
140
317095
2264.97
... More
Plain Cement concrete pavement with Nominal Mix (1:2:4) with 40 to 20mm (50% each) HBG metal using concrete mixer laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work) including cost and conveyance of all materials, labour charges, water charges, tools and tackles, all leads & lifts etc., complete for finished item of work as per directions of the Engineer-in-charge. (IS-456). FOR ROAD PAVEMENT WORK
70
464403
6634.33
... More
Supply & Spreading of gravel for formation of Road berms including cost of all materials, all leads and lifts, rolling with hand roller, watering , consolidation etc.complete as per the directions of the Engineer in charge for the finished item of work.
15
8396
559.76
... More
Construction sawn joint groove (using diamond studded blades) 3 to 5mm wide and dowel bars complying with clause 602.6.5 of specifications for road and bridge works (third revision) published at New Delhi in 1955 by IRC on behalf of Government of India, Ministry of surface transport and as directed in the drawings. the construction joints shall be out as soon as the contract as undergone intial hardening and as hard enough top take take the load of joints sawing machine without causing damage to the slab. the joint ceiling compound shall be of hot poured bitumen type having flexibility resistance to age hardening and due ability of the sealent shall be in accordance with BS5212 (part-2) with all lead and lift including cost and conveyance of all materials etc.,
90
4490
49.89
... More
Supplying & fixing of 600 mm dia RCC Hume pipe for culvert with RCC plain ended pipe & collars required confirming to BIS 458/2003 NP - 2 Class including cost & conveyance of all materials, labour charges complete for finished item of work as per the directions of the Engineer-in-charge.
15
22382
1492.18
... More
20 mm thick plain cement mortar bands in cement mortar 1 : 4 (1cement : 4 sand) upto 300 mm in width including cost & conveyance of all materials, labour charges, leads, lifts, scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.
30
23313
777.12
... More
GST applicable on total value of above civil works
0.18
6228660
34603667.32
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements