Tirumala Tirupati Devasthanams Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Tirumala Tirupati Devasthanams Tender
Civil And Construction
Opening Date7 Jun 2024
Closing Date24 Jun 2024
Tender Amount₹ 33,62,713
Costs
EMD
₹ 33,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
736776Bid Award Id
ViewTender No
02/EEVII/TTD/2024-25Tender Authority
Tirumala Tirupati Devasthanams ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply & fixing of Anodised Alluminium Tower bolts 10mm x 100mm long with ISI Mark IS 204
10
717
71.77
... More
Supply & fixing of Mild steel ( Powder coated ) Aldrop 200mm Long (IS 2681)
10
1135
113.54
... More
Supply & fixing of Anodised Alluminium Door Handels of 100mm long (IS 208)
20
1542
77.12
... More
Supply and fixing of Anodised Aluminium Butt hinges 75 mm long IS 205
30
2859
95.33
... More
Supply of Thermocole 12 mm thick sheets
30
1124
37.49
... More
Supply of UPVC / SWR pipe fittings( U.V resistant) as per approved make with ISI standards
-
-
-
... More
110mm dia Plain Bend 87.5 Degrees.
5
412
82.48
... More
110mm dia coupler
5
283
56.77
... More
110mm dia Single Tee
5
535
107.12
... More
Providing and fixing Cast iron Body bottle type hydraulic door closer( IS: 3564) with double speed adjustment, with necessary accessories and screws etc. complete.
3
2959
986.53
... More
75 mm dia 3 m Single Socket pipe
30
7458
248.6
... More
110 mm dia 3 m Single socket pipe
80
30313
378.92
... More
Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead - Brick work
2
613
306.67
... More
Demolishing and disposal of unserviceable materials within 100 metres lead - Unreinforced cement concrete up to 15cm thickness
3
5488
1829.52
... More
Dismantling doors, windows and clear storey windows, ventilators etc, (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metres lead - Not exceeding 3 sq.m in area
6
1638
273.15
... More
Dismantling, clearing away and carefully stacking materials useful for re-use. Flat and pan tiles or Mangalore tiles over flat tiles without roof timbers
83
2222
26.78
... More
Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work- Ordinary soil-Manual means up to 3m depth
Note: Cost of dewatering may be added, where required, up to 5% of labour cost. Assessment for dewatering shall be made as per site condition
5
1364
272.93
... More
Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.
10
9700
970
... More
Conveyance of waste materials such as debris, dismantling meterials ect with a lead of 5 kms from work site including loading unloading etc., complete
50
5323
106.47
... More
Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.
5
23138
4627.67
... More
Cement Concrete (1:2.5:5) - Grade M15 using 20mm (0.54 cum) and 12mm (0.36 cum) nominal size HBG crushed metal from any source conforming to the relevant ISI Standards for foundations etc., laid in layers of not more than 15cm thick well compacted including curing cost, machine mixing, cost and conveyance of all materials etc., complete
2
10813
5406.84
... More
- do - for 50 mm thick precast slabs using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards, with necessary reinforcement excluding cost of steel and tying of grills, centering charges,but including cost of necessary form work etc., complete as directed by the department.
10
4229
422.96
... More
Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars below 36mm Fe 500/Fe-500D grade (as per IS 1786 - 2008) for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement.
0.08
6690
83631.38
... More
Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position.
20
866
43.31
... More
Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution
50
34477
689.55
... More
Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc excluding cost of fixing in position.
30
1141
38.06
... More
Random Rubble masonry in Cement mortar (1:6) using granite stones from any source confirming to the relevant ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications (excluding cost of bond stones )
1.1
4665
4241.22
... More
Construction of Brick Masonry in CM(1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.
2.9
21031
7252.2
... More
Construction of 110 mm thick Brick partition walls CM (1:4) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. complete
10
8914
891.4
... More
Construction of pre-cast cement brick masonry in CM(1:8) using flyash cement / lime solid blocks with compressive strength of 75 kg/sq.cm - IS: 12894 - 1990 CLASS - 7.5-290x225x140mm pre-cast cement blocks or any approved size including curing cost and conveyance of all materials as directed during execution.
3
21741
7247.12
... More
in CM (1:5) 12 mm thick
12
3051
254.26
... More
in CM (1:3) 12 mm thick
7
1871
267.41
... More
Flooring with Antiskid floor tiles 1st quality of all series& shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply).
'-do- Supply of Non-skid red or white full body Ceramic floor tiles of size 450 x 450 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs
7
7200
1028.62
... More
Finishing the sides of walls with Ist quality glazed wall tiles of following sizes of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply).
'Supply of glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs
30
20664
688.8
... More
Flooring with vitrified tiles of 1st quality of following varieties of series and shades set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete - for finished item of work.(Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)
Supply of soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between8-10 mm 1st quality conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs.
12.5
13332
1066.59
... More
Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.
10
5448
544.88
... More
Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)
25
14495
579.81
... More
Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm confirming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC universal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd specification.
20
21131
1056.55
... More
SPECIALISED INJECTION GROUTING WITH CEMENT AND FREE FLOW ADDITIVES: a]. Drilling of holes with power drilling machine to the required depth [12mm to 14mm dia holes] b]. Fixing of Rubber Nozzles with cement and quick setting, Rapid hardening compound putty - Rapidstrong qs or equivalent. c]. Grouting of holes with 140 PSI Grout pump with cement slurry mixing with Specialized Free flow, Non-shrink Grout additive - RAPIDSTRONG GROUT ADMIX (Armstrong ) /POWER n GROUT ADMIX (EBT) / CEBEX 100 (Fosroc )/ ZORIGROUT GP1 (PMCC) / SIKAGROUT ANCHKOR NSQ (Sika) /WATERSHIELD GROUT ADMIXi.e., 250 Grams per bag of 50 Kgs Cement add required water to make slurry form. d]. After completion of grouting, Remove the Rubber nozzles e]. Later sealing of the hole with polymer cement putty - ROOFCRETE AR (Armstrong ) / ZORIGROUT CMG (PMCC) / POWER n GUARD ARM (EBT) / WATERSHIELD AR / Fosroc NITOBOND AR + Cement. * FOR STRENTHENING AND SEAL THE POROSITY OF THE CONCRETE TO ARREST THE LEAKAGES, DAMPNESS, LEAKAGES OF CONSTRUCTION JOINTS: (FOR TERRACE /CEILING / RCC RETAINING WALLS BASEDMENT FLOORINGS / WATER TANKS / RESERVOIRS / TOILETS etc.,)
100
17835
178.35
... More
Providing and applying wall putty of white cement or polymer or cement based putty of approved/standard make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls for old work
40
5325
133.14
... More
Painting with Ready mixed Synthetic Enamel paint in all shades -Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter, approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.
55
4046
73.57
... More
-do- Single coat for Internal walls for old work
880
37769
42.92
... More
-do- Two coats for Internal walls for old work
60
4371
72.86
... More
Painting single coat for External walls old work with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.
50
5048
100.96
... More
Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using four track window frame of size 122.2 x 31.75mm, for bottom section 1.1 mm thick, weight 1.205 kg/m, sides and top sections 1.2 mm, thick weight 1.093 kg/m; shutter section comprising top and bottom section of size 40mm x 18 mm wall thickness 1.25 mm. weight 0.417 kg/m; shutter side outer 40mm x 18mm, wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40 mm x 26.7 mm, wall thickness 1.1mm, weight 0.469 kg/m, shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles, tower bolts etc., providing and fixing 5mm thick plain glass for shutters fitted with rubber beading including cutting to required length, joints metered subdividing the frame tennoned and rivetted in the assembled frame to be stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams: cills as the case may be with necessary steel screws, rawl plugs or teak wood gutties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pre-treated for removal of any dust and coated with greasy materials for non adhesion of mortar and other sticky materials (this coating should be cleaned after installation) including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.
-
-
-
... More
- do - using aluminium section anodized to 12 - 15 microns.
60
239273
3987.89
... More
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.
-
-
-
... More
--do-- Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.
80
47559
594.49
... More
Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame.
40
146104
3652.62
... More
Providing and fixing 30 mm thick BRAND FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded Prelam Pac ‘C’ channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using Pac solvent cement adhesive etc. complete as per direction of Engineer-in-charge,manufacture specification and drawing.
30
94796
3159.89
... More
Supply and fixing of door frame made of hollow extruded PVC section having dimensions of 40 X 57mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be metre-cut/ welded. PVC DOOR FRAME
200
60198
300.99
... More
Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.
370
45162
122.06
... More
Supplying and fixing in position Flush doors of different sizes with 30 mm thick Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): of standard make Conforming to IS 2202 solid core flush doors , with one side Teak veneering and other side Commercial facing with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Double leaf using Best Indian Country wood (Vepa/Neredu) frames of size 65mmx100mm without threshold plate, including cost of M.S "Z" Hold fasts of 230 x 50 x 6mm, M.S Powder coated Butt hinges of 125 x 65 x 2.12mm, screws, nails, etc., complete, (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).
5
18258
3651.78
... More
Providing Unplasticized PVC SWR Rain water downfall pipes for the following dia with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.
-
-
-
... More
- do - 110 mm dia PVC pipe with wooden block of size 150mmx50mmx50mm
10
2759
275.91
... More
- do - 75 mm dia PVC pipe with wooden block of size 100mmx50mmx50mm
10
1672
167.27
... More
Supply and fixing of glow sign radium stickered Text / sign (or) picture of different sizes directly on the glass door partitions/Sheets/Floors/Roads/walk ways/walls etc., as directed during execution using glow sign radium stickers one layer including cost and conveyance of all materials etc., complete.
50
3856
77.12
... More
Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 4mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 4mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution .
200
36562
182.81
... More
Supply of OP Cement of approved make
0.3
1356
4520.25
... More
Hire charges for supply, erection and removal of digital design flex boards with frame work made with of 25mm x 25mm MS square pipe (light weight)with required back support to erect boards at specified places as directed by the department. The cost inclusive of materials, labour for printing, erection and removal square pipe (light weight) after completion of the function.
300
7563
25.21
... More
Providing and fixing precast concrete blocks (interlocking pavers) using not lessthan M40 grade paver blocks and thickness not less than 80 mm for medium traffic areas conforming to IS 15658-2006 of all shapes and designs as per the specification, over sand bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compactor having 3 tonne compaction force there by forcing part of sand underneath to come up in between joints. final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as interlocking pavers, sand etc., Labour and equipments such as cutting machine, lift, loading & unloading to work site clearing, bringing required all materials for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution by the Engineer-in- charge of the work.
30
26730
891.01
... More
Note: i. Thickness of interlocking pavers and underlaying sand bed shall be as per the Table 1 of IRC SP:63-2004 based on the traffic and type of road. The data can be worked out accordingly. i.e. 1.Cycle tracks and pedestrain footpaths, 2. Residential streets, 3. Industrial streets, bus and truck parkings areas and 4. Arterial streets, etc.
ii. The base and sub-base over which interlocking pavers are to be laid shall also be as per the Table 1 of IRC SP:63-2004 based on the traffic and type of road/ground surfaces.
-
-
-
... More
Supplying & Fixing Orissa Pan white glazed W.C of size 580 x 440 mm 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap ISI Mark or equivalent brand approved by the department.
20
35519
1775.97
... More
Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of white glazed with 'S' trap with ISI mark or equivalent brand approved by the department
25
52593
2103.74
... More
Supplying & Fixing white glazed flat back half stall urinals 590 x 375 x 390 mm 1st quality confirming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm confirming to IS:2556 - Part 6, Sec-6-1974 fixed with screws complete Indian make with ISI mark or equivalent approved by the department.
2
6364
3182.39
... More
Supplying & Fixing Indian make Flat Back Wash Hand Basin of size 550 x 400 mm - Single C.P. Pillar cock 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block
35
68476
1956.46
... More
Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996
25
23344
933.78
... More
Supply & fixing of 10 Litres capacity Single Flush PVC low level system with internal components & short bend.
18
28810
1600.57
... More
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Flowgurard SDR 11 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)
-
-
-
... More
22.20 mm OD Pipe - SDR 11
80
8826
110.33
... More
28.60 mm OD Pipe - SDR 11
50
8569
171.38
... More
34.90mm ODPipe - SDR 11
50
13603
272.07
... More
54.00mm OD Pipe - SDR 11
80
45845
573.07
... More
S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 50 mm NB Size
30
131373
4379.13
... More
S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
40
37672
941.81
... More
S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size
25
16261
650.46
... More
S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 80 mm NB Size
15
129056
8603.74
... More
S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size
125
157660
1261.28
... More
Supply of G.I Specials of approved make / ISI marked
-
-
-
... More
25mm dia G.I Elbows / bends
130
8772
67.48
... More
25mm dia G.I union
130
13925
107.12
... More
25mm dia Hex Nipples
130
6684
51.42
... More
supply and fixing angle stop cock 12.7mm (1/2")dia first quality Indian make heavy duty.(400 grms) - Zoloto/ARK
20
9967
498.35
... More
Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated
20
2137
106.85
... More
Supply & fixing NP soap dish heavy type with NP Screws
250
62795
251.18
... More
Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
10000
93700
9.37
... More
Engaging of SEMI SKILLED WORK MEN (2nd class ) carpenters / masons / plumbers / painters for maintainance works
40
32402
810.06
... More
Engaging of SEMI SKILLED WORK MEN (2nd class ) welder for maintainance works
20
16254
812.74
... More
Engaging of unskilled work man mazdoors/ woman mazdoor for maintainance works
100
74981
749.81
... More
Hire charges for welding set as directed during execution
30
3807
126.93
... More
Supply of welding electrodes 4mm dia
200
3642
18.21
... More
Removing and refixing Water Closets
25
5811
232.44
... More
Vinyl Flooring Sheets/ tiles having a nominal total thickness of 2 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance as per standards
25
24101
964.04
... More
Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm)
15
115282
7685.5
... More
Supply & fixing of UV resistant multi-wall polycarbonate sheets for roofing of approved colour - 6 mm thick confirming to IS specifications relavant for point etc., complete as directed during execution.
100
135179
1351.79
... More
Supply and delivery of 88/80 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights. Makes : Ashirvad / Finolex / Waterflo /Sudhakar
20
11547
577.35
... More
Supply and delivery of heavy duty couplings 88/80 mm UPVC pipe (27 Kgs / CM 2 ) capable of with standing up to 27 Kgs / CM2 above 200 mts and upto 300 mts
10
1039
103.9
... More
CUT STONE FLOORING 4" THICK:
Supply and dressing with hard granite stone slabs for flooring from Mulbhagal quarry including cost and converyance etc., complete with the following specifications.
7.5
29477
3930.37
... More
a) The size of the stone slab should not be less than 0.61mx 0.45m (2'-0"x1'-6").
-
-
-
... More
b) The thickness of the stone slabs should not be less than 100mm ( 4") in all sides.
-
-
-
... More
c) The top of the slab should be dressed with the following dressings properly.
-
-
-
... More
d) All the sides of the slabs should be dressed with following dressing to a depth of 40mm (11/2") from top surface to suit proper alignment and jointing with side slabs.
-
-
-
... More
e) The slabs should be laid horizontally and jointed properly to alignment over sand bed (excluding cost of sand bed).cement mortar bed.
-
-
-
... More
f) The joint of the slab should not be more than 6mm (1/4" thick).
-
-
-
... More
g) The slabs should be jointed with C.M(1:3) and the mortar should not come over the slab for the above item the rate is including cost and conveyance of all materials to site of work including necessary labour charges, dressing, laying, jointing but excluding cost of sand for bed, the bed will be paid under relevent item. (Cement mortar of 0.005 Cum/ Sqm should be used for joints). ... with Three line dressing
-
-
-
... More
Supply & fixing of M.S. Flats of Various sizes and thickness including cost and conveyance of materials to site of work, etc., complete as directed during execution.
10
653
65.34
... More
Supply of M.S Angles , channels etc., complete as directed during execution (TATA / SAIL / VSP/ JINDAL shall be used)
10
642
64.27
... More
Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum)
10
16067
1606.73
... More
1. The owner should transport the JCB to the work spot at his own costs
-
-
-
... More
2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour.
-
-
-
... More
3. The Excavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor.
-
-
-
... More
4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges.
-
-
-
... More
5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above.
-
-
-
... More
6. The Excavator- Loader (JCB) should have the Tacho metre and it should function properly.
-
-
-
... More
Supply and hire charges for plant & machinery For Maintenance works by TRACTOR
20
11375
568.78
... More
Supply of Hot dipped Galvanized Iron Chain link mesh of 2"x2" (50 mm x 50 mm) - 8 Gauge (4.0 mm) as per IS: 2721-2003 including the cost and conveyance and all incidental charges, etc., complete as directed during execution. The chain link mesh shall have a zinc coating of type 'heavy' with mass of coating 290 gm/sqm as per IS:4826-1979 (Reaffirmed 2001) Table.1. The mesh shall be provided with heavily coated galvanizede line wires of 4.50 dia. as given in Table.1 of IS:2721-2003.
50
29349
586.99
... More
Supply of Hot dipped Galvanized Iron Chain link mesh of 3"x3" (76 mm x 76 mm) - 8 Gauge (4.0 mm) as per IS: 2721-2003 including the cost and conveyance and all incidental charges, etc., complete as directed during execution. The chain link mesh shall have a zinc coating of type 'heavy' with mass of coating 290 gm/sqm as per IS:4826-1979 (Reaffirmed 2001) Table.1. The mesh shall be provided with heavily coated galvanizede line wires of 4.50 dia. as given in Table.1 of IS:2721-2003.
50
22547
450.95
... More
Labour charges for fixing various sizes of G.I Chain links and tying in position to the posts / angles or supports with G.I wire including the cost of the G.I wire etc., complete as directed during execution ( excluding cost of G.I chain links angles, posts, bolts and nuts) and fixing with bolts and nuts to the angles.
100
1414
14.14
... More
Supply and fixing of CEMENT BONDED PRELAMINATED PARTICLE BOARDS door shutter made out of U sections of size 12x14x12 made from 0.6mm thick pps sections with 12MM CEMENT BONDED PRELAMINATED PARTICLE BOARDS with necessary screws fixed at every 1’.0”interwells. The hardware consists of 250mm long aldrop – 2 Nos.150mm Handle- 1 No , 150 mm long ms powder coated tower bolt 1 no. nickle coated.The cost is inclusive of all incidentals, labor transportation charges.
5.1
13493
2645.74
... More
SOLAR ITEMS
-
-
-
... More
Annual maintenance of Solar water heating system(for total capacity 75000 LPD @7.20 per liter per year) which is forced circulation during maintenance the DTC panel, level controls, Sensors, Heater coil, breaker coils, water meters, ball valves, Unions and electrical heating equipment during rain or cloudy season are to be checked time to time once in 15 days and Collectors and replaced whenever it requires and its glass panels are to be cleaned daily, the cold water and hot water supplied details and its readings are to be recorded and preserved and sent to higher official for their information. The cost of parts are to distribution line should be opened daily by 3 AM and closed by 10 AM. Any leakage in the line and tanks are to be arrested by welding or any other mean as fit as per site conditions. The draining system should be done once in six months. Due to failure of electricity and pumps do not work, the vacuum will be created and air should be opened to release air/Vacuum steam
1
441000
441000
... More
Supply of 4 KW Heating coil and including all other incidental charges etc., complete
8
18032
2254
... More
Supply of sensors and including all other incidental charges etc., complete
8
17248
2156
... More
Supply & fixing of Electrical backup system4 Nos x 4 KW capacity with auto panel box for electrical backup (DTC system for electrical heaters) thermostat couple sensors including required cable (4sq mm 4 core cable) from DTC panel to tank
2
35476
17738
... More
Supply of Breaker coils and including all other incidental charges etc., complete
4
5488
1372
... More
Supply of Sacrificial Anode and including all other incidental charges etc., complete
4
3136
784
... More
Supply of Rubber gas cuts and including all other incidental charges etc., complete
100
2940
29.4
... More
Supply of Temperature Gauges and including all other incidental charges etc., complete
2
4998
2499
... More
Supply and delivery of CAPSTAN (BAYLAM) Make 25mm dia Water meters, Horizontal inferential type (Multi jet) with Magnetic Drive and Dry dial suitable for 50 degree centigrade temperature sealed against tempering. The Registration Box would be Hermitically sealed and would be complete separate unit with super dry dial and strength reading type. The water meter would strictly confirm to class -B of ISO: 4064 Standard and will bear BIS 779 Certification Mark. Meter should be supplied End coupling. (The rate is including all Taxes) etc., complete
3
15582
5194
... More
Removing the Scale formation block in Solar flat plate collector with help of drilling machine (for unscrewing) and cutting the 9 pin copper header line. Drilling the 9 no, spin absorbers with the help of 6'.6" long drill bit with drilling machine for removal of scales. Bracing will be carried out to 9 pin header line at cutting area. Pump circulation will be done with the HCL chemical and water (For 1 liter of Industrial HCL mixed with 10 liters of water) to confirm that there are no cages/ scales. After pump circulation the copper pin absorber will be fixed in the collector box area and re-fixed the glass or the top of collector. Chemical cleaning will be done with the pump circulation for Internal hot and cold pipe line. If any leakages are found at collector joint, rubber gasket will be re-placed and finally the solar collector will be kept under good working condition. The rate per collector is inclusive of all incidental charges and taxes etc., complete
4
12936
3234
... More
Removing the light Scale formation in Solar flat plate collector with help of Pump circulation will be done with the HCL chemical and water (For 1 liter of Industrial HCL mixed with 10 liters of water) to confirm that there are no cages/ scales. After pump circulation the copper pin absorber will be fixed in the collector box area and re-fixed the glass or the top of collector. Chemical cleaning will be done with the pump circulation for Internal hot and cold pipe line. If any leakages are found at collector joint, rubber gasket will be re-placed and finally the solar collector will be kept under good working condition. The rate per collector is inclusive of all incidental charges and taxes etc., complete
4
4312
1078
... More
Supply of collectors in place of damaged including cost and conveyance of all materials ,labor charges, all taxes etc., nominal collector area: 2sqm Effective Absorber area:1.89 to 1.98sqm riser and header material: Copper 12.50 mm dia risers and 25 mm dia headers 22 SWG for header/24 SWG for risers(with 9 risers for each collector)
7
101528
14504
... More
Supply of Toughened glasses of size 2000x1000x4 mm to collector as directed during execution including cost and conveyance of all materials incidental charges all taxes etc., complete
5
21805
4361
... More
Supply of PVC insulated 4 core 4.0sq mm sheathed flexible copper cable for voltage up to 1100V as per IS 694/1990. Makes: Million / Poly cab / Gold medal / Fortune art / V-guard / Vimal /GM /Kundan cab
10
40180
4018
... More
Supply of the 25mm ISI rigid PVC pipe of makes Finolex / Sudhakar / Supreme / Nandi / Sunlight / Besto Plant
5
392
78.4
... More
Supply of the Flange Rubber washers including all other incidental charges etc., complete.
5
88
17.64
... More
Supply of the Aluminum Flanges including all other incidental charges etc., complete.
5
269
53.9
... More
(Rupees Thirty three lakhs sixty two thousand seven hundred twelve and paise fifty two only )
-
3362712
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements