Tirumala Tirupati Devasthanams Tender

Cutting of Open BT road surface (as well as asphalt concrete up to 75 mm thick) including water bound macadam including stacking of excavated materials for pipe line trench work

Cutting of open cement concrete road surface with concrete saw cutter and removal with breaker including tacking of excavated materials for pipe line trench work

Earthwork excavation for foundation and depositing on bank for all lifts and with an initial lead of 10 M including all operational, incidental, labour charges such as shoring, sheeting, planking, struting, etc., complete for finished item of work

-do- ordinary soil - manual means up to 3 M depth

-do- Hard rock (blasting prohibited) up to 3 M depth

Conveyance of excavated surplus earth debris to a distance of 3 KM place specified by the Engineer-in-charge from the site of work including loading, unloading, etc., complete

Filling of foundations and basement with best river sand in layers of not more than 15 cms thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges, etc., complete.

Supply of machinary in desilting works guide lines for engaging excavator - loader (JCB) - (capacity/ output of the machine: 0.24/1 Cum). 1. The owner should transport the JCB to the work spot at his own costs. 2. The excavator -loader (JCB) should be able to excavate a minimum of 40 Cum of earth per hour. 3. The excavator -loader (JCB) should be able to load 20 tractors per hour with quantum of 2.83 Cum lof loose factor per each tractor. 4. The rate of per hour is inclusive of all the costs like POL, transportation of machine, driver batta and other incidental charges 5. The payment of the excavator - loader (JCB) should be paid hourly basis subject to the condition 2 & 3 cited above. 6. The excavator - loader (JCB) should have the tacho meter and it should function properly.

Hire chrages for engaging Tractor for pulling. The rate including Hire charges, Fuel, Crew, other incidental charges, etc., complete

Supply of scavengers for regular maintenance, festivels, etc.,

Supply of Masons/ Stone cutters - semi skilled for regular maintenance, festivels, etc.,

Supply of Man Mazdoor

Cement Concrete (1:3:6) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant lSl standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.2 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant lSl standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Supply and placing of the M20 Design mix Concrete corresponding to lS 456 using concrete mixer using of 20mm HBG crushed metal 0.480 cu.m , 10mm HBG crushed metal 0.320 cu.m , sand 0.400 cu.m and cement 350 kg with water cement ratio of 0.53 (185.5 Lit per cu.m of CC) etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, Iaying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department, but excluding cost of centering, shuttering charges and excluding cost steel and its fabrication charges, for finished item of work (APSS No 402). for foundations, plinth, pedstals (below Plinth) Note : The design mix shall be got designed by furnishing the information required as perclause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M20 grade concrete is 350 kg/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.

Centering charges for VCC vertical walls of plane surface (rate is for both sides centering including open drains)

Constructlon of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance oi all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding off corners, incidental charges as directed during esecution complying with standard specifications, etc., complete for the following proportions & thickness

-do- in CM (1:3) 20 mm thick

-do- in CM (1:5) 12 mm thick

-do- in CM (1:5) 20 mm thick

Supply the following PVC/ SWR pipes as per ISI standards

110 mm dia - Single socket pipe - 6 Kg/ CM²

160 mm dia - double socket pipe - 6 Kg/ CM²

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., any dia including fixing necessary fittings like bends, plugs, couplers, junctions, tees,etc., with solvent jointing as per standard practice

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

Supply fabrication and erection of steel structure in position by using M.S Tubes & pipes of all diameters as per IS-1161 including Labour charges for fabricating all heavy steel works like Trusses, Stanchions, heavy Beams and Girders including cost of welding rods, power charges, etc and cost and conveyance of all materials and including labour charges for fixing etc.,complete as directed during execution.