Tirumala Tirupati Devasthanams Tender

Clearing Juliflora (Prosafis)Jungle including up- rooting and removing of Juliflora stumps

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum)

1. The owner should transport the JCB to the work spot at his own costs 2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor. 4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above. 6. The Excavator- Loader (JCB) should have the Tacho metre and it should function properly.

Hire charges for Tractor with ripper attachement as directed during execution

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including Ordinary soil-Manual means upto 3m depth.

Conveyance of excavated surplus earth /debris to a distance of uo to 3 KMS from the site of work at at a place specified by the Engineer in charge including loading and unloading etc., complete as directing during execution.

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete

Cement Concrete (1:4:8) using 40mm (0.54 cum), 20mm (0.27 cum) and 12mm (0.09 cum) nominal size hard broken granite crushed metal from any source conforming to the relevent ISI standards for foundations etc., laid in layers of not more than 15cm thick well compacted including curing, machine mixing cost and conveyance of all materials etc., complete

Supply   and placing of M 25 Design Mix   Concrete corresponding to IS 456   using concrete mixer using of 20 mm HBG crushed metal   0.530 cum (707 kgs),. 10 mm HBG   crushed metal, 0.362 cum (471 kgs) , sand 0.407 cum (616 kgs.) and cement 380   kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cum of CC) etc., to site   and including Seignoirage charges, sales & other taxes on all materials   including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete,   curing etc., complete with cement from standard suppliers approved by the   department but including cost of   centering,shuttering charges of steel scaffolding pipes,jack props, wallers, foot plates, brackets, steel centering plates etc., and excluding   steel and its fabrication charges, for finished item of work (APSS No. 402)

-do- For footings

-do- For columns

-do- For drain slab excluding cost of   centering,shuttering charges of steel scaffolding pipes,jack props, wallers, foot plates, brackets, steel centering plates etc., and excluding   steel and its fabrication charges, for finished item of work (APSS No. 402

Centering & Scaffolding charges - Floor wise rates for steel scaffolding pipes, jack props, steel centering plates etc., for unsupported height 3.66 m roof slab above 150mm - up to 300 mm thick. For drain slab.

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of High yield strength deformed bars below 36 mm Fe 500 (as per IS 1786 - 1979) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (in the absence of 18 G binding wire, 2 nos of 20 G binding wire in tanem are to be strictly adhered). do-below 36 mm Fe 500/Fe-500-D.

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions

-do- in CM (1:3) 12mm thick

-do- in CM (1:5) 12mm thick

-do- in CM (1:5) 20mm thick

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Painting Two coats for new walls with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter over a cement primer exterior grade - 2 (Total Three Coats) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.