Tirumala Tirupati Devasthanams Tender

Cement Concrete (1:4:8) using 40mm (0.46 cum) and 20mm (0.29 cum) and 10mm (0.23 cum) HBG crushed metal from any source conforming to relevents ISI standards for foundations etc., laid in layers of not more than 15cm thick well compacted including curing cost and conveyance of all materials etc., complete.

For Footing

For Columns up to Basement

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of below 36mm Fe-500 /Fe-500D (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement.

Supply, Fabrication and Fixing in position of M.S tubes and pipes of all diameters as per ISI 1161 of approved size design, including labour charges for fabricating & fixing all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges etc., including cost of fixing in position,including Two coats with Synthetic enamel paint in all shades - Grade I - over a Primary coat with ready mixed Red oxide metal primer paint (total Three Coats) approved colour and make, including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete as directed during execution. TATA/JSW/VSP/SAILNote: If any size is not available in the above makes then only the Executive Engineer shall alone spcifically permit on papre the usage of APOLLO brand to that extent only.