Tirumala Tirupati Devasthanams Tender

Cuttung open Cement concrete road surface with concrete saw cutter and removal with breaker.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including Ordinary soil-Manual means upto 3m depth.

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete

Conveyance of excavated surplus earth/debris to a distance of 4 to 5 KM from the work site of work at the place specified by the Engineer-in-charge including loading at site of work and unloading at the place specified by the department during execution.

Cement Concrete (1:4:8) using 40mm (0.54 cum), 20mm (0.27 cum) and 12mm (0.09 cum) nominal size hard broken granite crushed metal from any source conforming to the relevent ISI standards for foundations etc., laid in layers of not more than 15cm thick well compacted including curing, machine mixing cost and conveyance of all materials etc., complete

Supply and placing of the M20 Design Mix, using of 10mm HBG crushed metal 0.480 cum, 6 mm HBG crushed metal 0.320 cum, sand 0.400 cum and cement 350 kgs with water cement ratio of 0.53 (185.5 cum of CC) etc. from any source conforming to the relevent ISI standards including cost and conveyance of all mterials like cement, fine aggregare (sand) coarse aggregate, water etc., to site and including and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of centering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for 50mm thick precast slabs using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevent ISI standards with necessary reinforcement, but including cost of necessary form work etc., complete as directed by the department. 50mm thick

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of High yield strength deformed bars below 36 mm Fe 500 (as per IS 1786 - 1979) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (in the absence of 18 G binding wire, 2 nos of 20 G binding wire in tanem are to be strictly adhered). do-below 36 mm Fe 500/Fe-500-D.

Labour charges for fabricating steel works like window grills, compound wall grills, iron doors, windows, including cost of welding rods, power charges, excluding cost of fixing in position.

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Randum Rubble masonry CM (1:6) using granite stones from any source conforming to the relevent ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications. ( excluding cost of bond stones)

Plastering in Cement mortar (1:3) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Plastering in Cement mortar (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Painting two coats for external walls for new plastered surface with Acrylic Emulsion paint exterior grade with silicon additives having VOC (volatile organic compound) content less than 50 grams/litre of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting single coat for external walls for old plastered surface with Acrylic emulsion paint Exterior grade with silicon additives having VOC (volatile organic compound) content less than 50 grams /litre of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting Two coats for old plasterd surface with Synthetic enamel paint in all shades grade -1 having VOC (volatile orgainc compound) content less than 50 grams/litre of approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Painting single coat for old plasterd surface with Synthetic enamel paint in all shades grade -1 having VOC (volatile orgainc compound) content less than 50 grams/litre of approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Painting piming coat with Ready mixed Cement Primer exterior grade-2 for new work (Water thinnable) plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of M.S. Tubes & pipes of all diametres as per IS-1161 as and when required by the dept., as directed during execution.

Supply of the following labour as and when required by the dept., as directed during execution.

(a) Man / Woman Mazdoors

(b) Carpenter / Stone cutter / Manson - Semi skilled work man ( Second class )

Supply of fine aggregate/ Sand (Un screened) for filling

Supply of sand for motor

Supply of 60/70 Bitumen (Bulk) VG 30 including all charges etc. complete.

Providing and laying of Hot applied Thermoplastic Compound 2.5 mm thick inlcuding with Reflectorising Glass Beads @ 250 grams per Sqm area, thickness of 2.5 mm is exclusive of surface applied Glass Beads as per IRC:35, including cost and conveyance of materials, labour charges, hire charges of machinery for finished item of work. The material should be of BERGER make (as per MORTH 803). The finished surface to be level,uniform and free from steaks and holes as per specification 803 MORTH. ( On Cement concrete pavement surface) 1.A sealing primer may be applied in advance on cement concrete pavement to ensure proper bonding.Any laitance and/or curing compound to be removed where paint is required to be applied on concrete surface. 2. Cost of painter is already included in hire charges of road marking machine.