Tirumala Tirupati Devasthanams Tender

Supply, erection and commissioning of Tilting grinders of 20 liters capacity with the following specification. Capacity : 20 liters Stainless steel tilting drum with S.S Legs fitted on a base box having a heavy duty gear driven motor. The drum and body made of 20 gauge SS 304 grade sheet with 3 phase suitable electrical motor Make: Crompton/ Suguna/ any ISI motor with suitable L & T starter. Stopper rod made of SS 304 grade Make: Suguna / Lakshmi/ Sowbhagya / Crompton / Trident. NOTE: The rate is inclusive of all taxes and excluding GST

Supply, erection and commissioning of 10 liters capacity standard type wet grinders with the following specification. Stainless steel body of wet grinder with black stone. The drum and body made of 20 gauge SS304 grade sheet with 3 phase suitable electrical motor make Crompton/Suguna/ any ISI motor with suitable L&T starter. The gear box mounted on cast iron/MS base plate with gear box system with stoppers and top stone holding in and direct drive. Stopper rod made of SS304 grade including Coconut scrapper NOTE: *The rate is excluding GST and including transportation, loading, unloading, connection accessories, etc., to the work site. *All the materials/process/manufacture shall be as per relevant ISI codes wherever applicable. (Excluding GST)

Supply, erection and commissioning of 05 Liters Capacity Standard Wet Grinder of the following specification. Stainless steel body of wet grinder with black stone. The drum and body made of 20 gauge SS 304 grade sheet with 3 phase suitable electrical motor Make: Crompton / Suguna/ any ISI motor with suitable L & T starter. The gear box mounted on cast iron / MS base plate with gear box system with stoppers and top stone holding in and direct drive. Stopper rod made of SS 304 grade including Coconut scrapper. NOTE: The rate is inclusive of all taxes and excluding GST

Supply, erection and commissioning of Flour Mill with 12" Plates with '100 Kgs/hour capacity without motor and starter etc., as approved by the Department complete. (Excluding GST)

Supply and fixing of 10 HP Motor with Kirloskar Make and RPM 1440 to the Flour Mill Machine with all electrical connections ( Excluding GST )

Supply and fixing of 10 HP Starter (Star Delta) with board etc., of L & T make to the Flour Mill Machine with all electrical connections. (Excluding GST) ;

Supply and fixing of Vee Pulley and Vee belt to the Flour Mill.(Excluding GST)

Supply, fixing and commissioning of Vegetable peeler machine of capacity 25 to 30kgs per batch, the capacity of 1Hp motor of ISI make and drum made with 304 grade stainless steel house in M.S. Angle frame, bottom with the circular in impeller pasted with abrasive stone chips and firmly fixing the inlet and out let water pipe connections etc., The rate is exclusive of GST, cost and conveyance of machine and its accessories F.O.R at Tirupati.(EXCLUDING GST)

Supply of SS Two Burner Gas Stoves of size 48" x 24" x 21" Height with the following Technical specifications: Top cut out AISI 304 quality 10 g thick press folder sections forming. Top cut out portion 16" x 1" - 2 nos. of cast iron rings. Center 5/8 raised all 4 sides 2" + 5/8 down folder SS 1 ¼" x 1 ¼" x 5 mms thick of AISI 304 grade angles. Both bottom and top frame including both rear sides in between 4 legs. 1 ¼" OD - 16 gauge thick pipe welded at 6" height for (Gas connection). Front side 18 gauge - 4 gauge step panel of 9"height other 3 side, the panel should be fitted with10 gauge thick of SS bolt and nuts.18G step panel 9" height panel with air vent louvers panel should be fitted with 10 gauge thick of SS brackets and SS bolt and nuts.2 Nos. 22 gauge SS drip tray with folded handles. To provide T-35 United make LPG burners - I no in each grid in adjustable 304 grade frame and burner clamp in cut of portion. To provide necessary needle control valves left & right adopters. To provide 2" copper pig tails with united make. To provided flexible pipes from existing gas pipeline to the stove. The supplier responsible to test the stove at the time of installation. The rate is exclusive of GST and including cost and conveyance of machine and its accessories to the work site.(Excluding GST)

Supply of SS Four Burner Gas Stoves of size 96" x 24" x 21" Height with the following Technical specifications: Top cut out AISI 304 quality 10 g thick press folder sections forming. Top cut out portion 16" x 1" - 4 nos. of cast iron rings. Center 5/8 raised all 4 sides 2" + 5/8 down folder SS 1 ¼" x 1 ¼" x 5mm thick of AISI 304 grade angles. Both bottom and top frame including both rear sides in between 6 legs. 1 ¼" OD - 16 gauge thick pipe legs with ¾" SS nut and adjustable bullet legs. In between 6 legs 1" OD AISI 304 quality - 16 gauge thick pipe welded at 6" Height for (Gas connection). Front side 18 gauge - 4 gauge step panel of 9" height other 3 side, the panel should be fitted with 10 gauge thick of SS bolt and nuts. 18G step panel 9" height panel with air vent louvers panel should be fitted with 10 gauge thick of SS brackets and SS bolt and nuts 2 No. 22 gauge SS drip tray with folded handles. To provide T-35 United make LPG burners - I no in each grid in adjustable 304 grade frame and burner clamp in cut of portion. To provide necessary needle control valves left and right adopters. To provide 2" copper pig tails with United make. To provide flexible pipes from existing gas pipeline to the stove. The supplier responsible to test the stove at the time of installation. The rate is exclusive of GST and including cost and conveyance of machine and its accessories to the work site. (Excluding GST)