Tirumala Tirupati Devasthanams Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Tirumala Tirupati Devasthanams Tender
Civil And Construction
Building Construction
Opening Date13 Mar 2024
Closing Date28 Mar 2024
Tender Amount₹ 1,41,96,501
Costs
EMD
₹ 1,42,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
733094Bid Award Id
ViewTender No
443/SE-II/TTD/2023-24Tender Authority
Tirumala Tirupati Devasthanams ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Conveyance of excavated surplus earth/debris to a distance upto 2KM's from the site of work to the place where specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution.
140
8283
59.17
Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.
290
454798
1568.27
Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.
100
575056
5750.56
-do- FOR FOOTINGS
30
326748
10891.63
-do- FOR PLINTH BEAMS
10
137152
13715.24
-do- FOR COLUMNS UP TO BASEMENT (PEDESTALS)
6
69418
11569.81
-do- For Columns In First Floor
9
131903
14655.92
-do- For Columns In Second Floor
9
139423
15491.51
-do- For Columns In Third Floor
3
48976
16325.53
-do- for ROOF BEAMS (RECTANGULAR) IN FIRST FLOOR
22
294141
13370.09
-do- for ROOF BEAMS (RECTANGULAR) IN SECOND FLOOR
25
348358
13934.35
-do- for ROOF BEAMS (RECTANGULAR) IN Third floor FLOOR
3
43491
14497.04
-do- FOR LINTEL BEAMS IN first FLOOR
0.6
6238
10398.26
-do- FOR LINTEL BEAMS IN SECOND FLOOR
1.2
13019
10849.77
-do- for ROOF SLAB (EXCLUDING CENTERING) IN FIRST FLOOR
46
352272
7658.09
-do- for ROOF SLAB (EXCLUDING CENTERING) IN SECOND FLOOR
50
395008
7900.17
-do- for ROOF SLAB (EXCLUDING CENTERING) IN third FLOOR
3.5
28497
8142.26
-do- 0.6m width for sun shades in First Floor
10
11634
1163.41
-do- 0.6m width for Sun shades in Second Floor
20
24408
1220.41
- do - for 50mm thick precast slabs using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards, with necessary reinforcement excluding cost of steel and tying of grills, centering charges,but including cost of necessary form work etc., complete as directed by the department.
5
2554
510.91
-do- Slabs Upto 150mm thick in first floor
300
199590
665.3
-do- Slabs Upto 150mm thick in second floor
325
228601
703.39
for Third floor Upto 150mm roof slab
25
18537
741.48
Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars below 36mm Fe500 grade /Fe500D grade (as per IS 1786 - 2008) for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).
Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement
24.5
2256307
92094.19
Random Rubble masonry in CM(1:6) using granite stones from any source confirming to the relevant ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications (excluding cost of bond stones )
10
54636
5463.63
-do- Upto basement
16
136543
8533.95
-do- in First Floor
40
347223
8680.59
-do- in Second floor
60
539153
8985.89
-do- in Third floor
20
185823
9291.16
-do- in First Floor
35
37254
1064.42
-do- in Second floor
105
116274
1107.38
-do- First Floor
515
171814
333.62
-do- Second Floor
515
187732
364.53
-do- Third Floor
22
8699
395.45
-do- Upto basement
70
21339
304.85
-do- in First floor
175
55917
319.53
-do- in Second floor
265
92869
350.45
-do- Upto basement
70
33114
473.06
-do- in First Floor
175
85354
487.74
-do- in Second floor
265
141319
533.28
Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item. - DO - FIRST FLOOR
30
19424
647.49
- DO - IN SECOND FLOOR
280
196610
702.18
Providing 200 mm thick plain cement mortar Raised band in cement mortar 1:4 (1 cement : 4 sand) upto 300 mm in width
40
3363
84.09
-do- First floor
60
70704
1178.41
-do- Second floor
55
68170
1239.46
first floor
28
25639
915.68
second floor
40
37238
930.97
Supply and fixing of 10 mm wide PVC edge beeding including cost and conveyance of all materials and incidental charges etc.,complete.
45
2493
55.41
-do- In First Floor
95
138237
1455.13
-do- in second floor
106
160715
1516.18
Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 X 25mm any shades set over base coat of cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)
300
331884
1106.28
Supply and fixing of stainless steel SS 304 grade Tubes, sections, Plates sheets and pipes of all size and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finishing etc., complete as directed during execution.
780
594250
761.86
Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint in all shades over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.
930
128628
138.31
Supply, fabrication and erection of steel structure in position by using MS tubes & pipes of all diameters as per IS -1161 including labour charges for fabricating all heavy steel works like strusses, stanchions, heavy beams and girders including cost of welding rods,power chages etc..and cost and conveyence of all materials and including labour for fixing etc complete as directed during execution.
700
105287
150.41
Supplying and fixing in position Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 35 mm thick conforming to IS:2202 of standard make with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Single leaf using Best Indian Teak wood frames of size 75mm x 100mm without threshold plate, including cost of M.S "Z" Hold fasts of 230 x 50 x 6mm, M.S Powder coated Butt hinges of 125 x 65 x 2.12mm, screws, nails, etc., complete, (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).
30
155866
5195.56
Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame
15
58566
3904.4
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. -do- Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum no.s for horizontal member.
10
6354
635.46
-do- Three track three panels sliding window with fly proof SS wire mesh(Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).
26
267926
10304.87
Providing and fixing factory made uPVC white colour fixed glazed windows / Ventilators comprising of uPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant.Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made.
-do- Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.
3.5
25872
7392.03
Anodized alluminium aldrop slidding door bolts of 16 mm x 300 mm long
10
3040
304
Anodized alluminium aldrops slidding door bolts of 16 mm x 200 mm (3T pieces)
6
1442
240.45
Anodised alluminium Tower bolts of size 12 mm dia X 300 mm long with ISI mark IS 204 (pt-II) 1978
32
6320
197.52
Anodised alluminium Tower bolts of size 12 mm dia X 150 mm long with ISI mark IS 204 (pt-II) 1978
32
3407
106.48
Anodized alluminium door handles IS 208 of 150mm long
32
4470
139.69
Heavy duty Aluminium Door Stopper
16
1172
73.28
Providing Unplasticized 110mm dia PVC pipe with wooden block of size 150mmx50mmx50mm PVC SWR Rain water downfall with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.
65
19170
294.93
-do- 110mm dia PVC/SWR pipe
30
12520
417.35
-do- 75mm dia PVC/SWR pipe
25
6951
278.05
-do- 22.20mm ODPipe - SDR 13.5
35
3766
107.62
-do- 28.60mm ODPipe - SDR 13.5
35
5449
155.71
-do- 34.90mm ODPipe - SDR 13.5
20
4900
245.02
-do- 41.30mm ODPipe - SDR 13.5
15
5066
337.77
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'P' trap with ISI mark or equivalent brand approved by the Department.
2
4797
2398.56
Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996
2
2023
1011.7
Supply and fixing of 10 litres capacity single flush PVC low level Cistern with internal components & short bend.
2
3551
1775.89
Supplying & Fixing of 550 X 400 mm Single C.P piller cock Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams with standard CI brackets including wooden block.
2
4295
2147.74
S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 40 mm NB Size
2
5412
2706.23
S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size
2
2032
1016.23
Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality
3
91
30.66
S & F 19.05 mm heavy duty NP stop cock Indian make with ISI mark 400 grams
6
4065
677.53
Supply & Fixing NP soap dish heavy type with NP Screws
2
541
270.68
Supply and fixing of NP coat hook.
4
229
57.27
Supply & fixing towel rod (CP) of 24" long and 3/4 " dia
2
909
454.91
Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457.2 mm
2
1149
574.78
Supplying and fixing of BITW coat hanger of size 0.60 x 0.076 x 0.025 m including finishing smooth the teak wood reapers and polishing with two coats of French Polish over Bee waxing of approved quality and fixing the specified (CP or aluminium ) coat hooks of different sizes of required numbers at equal spacing as directed during execution and fixing the coat hangers to the walls including cost and conveyance of all materials like screws, nails etc( excluding cost of hooks and fixing charges).
2
402
201.33
Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over new plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls.
515
117878
228.89
Painting two coats for new walls with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade over primary coat using ready mixed cement primer (water thinnable) for interior grade-1 (total three coats) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls.
590
124377
210.81
Painting two coats for new walls with Acrylic Emulsion paint exterior grade - 2 with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade over one coat of primer using cement primer (water thinnable) for exterior grade-II (Total three coats) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work. FOR EXTERNAL WALLS
520
150727
289.86
Painting two coats for new wood work with ready mixed Synthetic enamel paint in all shades - Grade-1 having VOC (Volatile organic compound) content less than 50 grmas per litre over a primary coat with ready mixed wood primer (total three coats) of approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.
20
4484
224.22
Supply of Round jali
4
100
25.18
Supply of 110mm dia Door Bend 87.5 Degree of U.V. resistant UPVC SWR pipe fittings (as per BIS standards).
5
572
114.49
Supply of 110mm dia Plain Bend 87.5 Degree U.V. resistant UPVC SWR pipe fittings (as per BIS standards).
5
440
88.16
Supply of 110mm dia Single Tee (With Door) of U.V. resistant UPVC/ SWR pipe fittings (as per BIS standards).
5
686
137.39
Supply of 110mm dia Vent cowl of U.V. resistant UPVC/ SWR pipe fittings (as per BIS standards).
5
103
20.6
Supply of 110mm dia Single Y (With Door) of U.V. resistant UPVC/ SWR pipe fittings (as per BIS standards).
5
910
182.05
Supply of 75mm dia Door Bend 87.5 Degree of U.V. resistant UPVC SWR pipe fittings (as per BIS standards).
5
354
70.98
Supply of 75mm dia Plain Bend 87.5 Degree U.V. resistant UPVC SWR pipe fittings (as per BIS standards).
5
263
52.66
Supply of 75mm dia Single Tee (With Door) of U.V. resistant UPVC/ SWR pipe fittings (as per BIS standards).
5
383
76.71
Supply of 75mm dia Vent cowl of U.V. resistant UPVC/ SWR pipe fittings (as per BIS standards).
5
74
14.88
Supply of 75mm dia Single Y (With Door) of U.V. resistant UPVC/ SWR pipe fittings (as per BIS standards).
5
498
99.61
Supply of 4" (101.6 mm ) Nahany Trap (Without Jali with Inlet
5
515
103.04
Flooring with high polished granite 16 to 18 mm thick slabs up to 8'-00 (2.43 M) - Regular colours (other than black and Premium colours) set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply)
20
85274
4263.72
Flooring with high polished granite 16 to 18 mm thick slabs up to 8'-00 (2.43 M) - black colour set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply)
5
18890
3778.02
SPECIALISED FIVE LAYER SYSTEM OF WATERPROOFING TREATMENT TO THE TERRACE WITH FOLLOWING SPECIFICATION.
310
207997
670.96
Providing weather proof course with Screeding concrete in CC(1:2:4), 25mm average thickness using 6 to 10mm nominal size HBG crushed metal chips, screeding duly embedding 24G chicken mesh with necessary overlap etc.., and finishing the surface neatly and rounding the edges at parapet walls, columns etc.., including cost of chicken mesh including cost and conveyance of all materials etc..., complete as directed during execution.
22
198035
9001.63
Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead Brick work
40
14540
363.51
Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead R.C.C.work
45
172778
3839.53
Dismantling, clearing away and carefully stacking materials useful for re-use, stone masonry in cement mortar
85
73791
868.14
Cement Concrete using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including necessary centering charges, curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.(C.C 1:2.5.5)
15
108514
7234.3
Supply and Fixing of ISI Mark 25mm outer dia heavy grade (2.20mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal
600
60102
100.17
Supply and Fixing of ISI mark 25mm outer dia heavy grade (2.20mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in walls of brick building duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and for surface wiring on chromium plated metallic base saddles on ceiling of roof / existing brick building walls, columns, beams, roofs / trusses / channel etc., and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal
2200
208098
94.59
Supply and run of 3 wire of 14/0.3mm (1.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI
20
1263
63.16
Supply and wiring with 3 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with 3 plate pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / L&T englaze / Crabtree - Murano / Amare / Ducor / GM Four-Five
120
91269
760.58
Supply and wiring with 3 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Grade-A: Modular Switch Makes: LegrandArteor / Schneider Zen cello / Goldmendal / GIFA / L&T englaze / Crabtree- Murano / Amare / Ducor / GM Four-Five
10
6711
671.13
Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI
1400
155260
110.9
Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI
300
50553
168.51
Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI
100
36687
366.87
Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
100
12022
120.22
Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
100
17175
171.75
Supply and fixing of 6 /10 Amps 2 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
8
1053
131.67
Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
15
2318
154.57
Supply and fixing of 20 Amps 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
15
3349
223.27
Supply and fixing of Remote Bell on the existing switch board and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)
8
6665
833.16
Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
40
33715
842.89
Supply and fixing of 6 /10 Amps Modular Bell Push with Neon Indicator on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five
8
1328
166.02
Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.
40
7132
178.32
Fixing of given (9" to 24") Exhaust fan on to the existing hole and giving necessary connections complete.
20
9917
495.89
Fixing of given 25 Ltrs to 50 Ltrs Storage type water heater with 2 Nos. of Nylon / PVC / Metallic hose pipe etc., on wall with Anchor fasteners of size 12mm x 75mm pin type including connections etc., complete.
6
5048
841.41
Supply and Fixing 19/20mm dia MS tubular fan down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete
8
1611
201.44
Fixing of given Tube light fitting with 1/2 Mtr conduit suspension arrangements with ball & socket from ceiling etc., including giving connections and all labour charges etc., complete.
8
3712
464.01
Supply and fixing of 16A(or)20 Amps 2 module 3 Pin Combine Sockets with shutter and a 20/25 Amps SP MCB 10kA Breaking capacity C Curve insert in a 4 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. ( Note The rate will given supply of obove 20Amps module socket,20/25 SP MCB and 4 Module Hot Dip Galvanized 20 / 18 SWG Module box, including fixing accessaries and all labour charges etc., complete.
4 module concealed GI Box Make:Legrand / G.M / L&T / Anchor / Goldmedal
Socket & 4 module Cover plate Make:Legrand mylinc/ G.M-four five / Anchor roma /Goldmedal (GIFA) /L&T englaze
6 to 32A MCBs Grade A:Makes: Legrand-DX3 / Schneider-Acti9 / Hager-h3 / Siemens-5SX4 / Havells STADx / L&T-AU / Indo Asian-Opti pro / HPL (Techno)
20
15022
751.14
Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with SS tank and ABS plastic body of 25 Ltrs capacity to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete.
Makes : Crompton Solarium BLX / Jaquar Elena / Venus Lyra / Racold Eterno Swift / AO Smith HSE SDS /Havells Puro Turbo/Warmex
6
72134
12022.36
Supply and fixing of 4 Way TP & N Horizontal type Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly concealed in the wall with neat plastering etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)
1
3659
3659.6
Supply and fixing of 63A Four Pole,30mA RCCB for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).
1
3933
3933.44
Supply and fixing of 63 Amp FP Isolator as per IEC:60947 Part-III with sheet steel enclosure with IP 20 Protection as per IS 8623; IS 13032; IEC 61439-3 Concealed in wall (Brick / stone) and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).
1
1773
1773.3
Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).
20
5850
292.54
Supply and fixing of 40 to 63 Amp FP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).
1
2201
2201.54
Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.
160
30227
188.92
Supply and transportation of 70 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.
240
115413
480.89
Labour charges for run of U.G.Cable upto 50 sq.mm on wall through existing (PVC / G.I) pipe/cable tray with necessary fixing arrangements such as saddles, clamps, wooden separator etc., or existing trench if any with necessary connections (as directed by departmental official)
160
7942
49.64
Labour charges for run of U.G.Cable from 70 sq.mm to 150Sq.mm on wall through existing (PVC / G.I) pipe with necessary fixing arrangements such as saddles, clamps, wooden separator etc., if any with necessary connections (as directed by departmental official).
240
23143
96.43
Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.
60
687
11.45
Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 70 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.
16
549
34.35
Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc upto 16 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI
30
2919
97.32
Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 70 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI
4
801
200.37
Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.
80
3786
47.33
Supply and fixing of fabricated M.S clamps made out of 25mm x 6mm MS flat with necessary holes on either side with suitable 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 70 Sq.mm to 120 Sq.mm on walls etc., including all labour charges etc., complete.
100
6803
68.03
Providing earthing as per IS 3043/ 1987 with 100mm (ID), 13mm thick C.I. Pipe of 3.0 mtr. length after excavating an earth pit of size1.5 m X 0.9 M X 3.00M(Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 M X 1.20 M X 1.65 M) and filling with a homogenous layer of 40 Kgs. of Coke / Char Coal, 20 Kgs. of Salt and the required quantity of sand around 100mm pipe from the bottom of the pipe to a height of 2.7mtr. and filling the remaining excavated portion with earth and consolidation / Settlement of the trench should be done by filling with sufficient quantity of water. A concrete bed of size 0.8 M X 0.8 M X 0.1 M thick and an inspection chamber having inside measurements of 0.4 M X0.4 M X 0.4 M with wall thickness of 100 mm with cement concrete CC (1:2.5:5) using 20 mm HBG Metal is to be constructed with side wall 100 mm above ground level and plastering the exposed walls neatly with CM (1:3) with 12 mm thick.
4
38306
9576.57
Supply and run of ' 25mm X 3mm G.I Strip for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.
200
19878
99.39
Supply and fixing of 1 or 2 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
16
2988
186.81
Supply and fixing of 8 or 9 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
20
6553
327.65
Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
35
12870
367.72
18/24 Module Vertical GI Sheet Metal Box of 18 guage Make:Legrand Mosaic/North west/M.K/G.M/L&T/Indo Siman/Salzar/G.M Four-five/Legrand Areator/Schneider Zen celo / MK Blenge/Toyoma/Vimal/Anchor Roma/ Clipsal / Havells / ABB / Indo Asian / Siemen Delta Vega /Spectra mettalic/Wave-Pointer/Fortune Art/Feno Switch/Legrand Myris/Cabtree Thamees Platinum/Millian Logus/Gold Medal Curve/CPL/Great White Myrah.
8
3457
432.24
Supply and fixing of 1 or 2 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five
16
1465
91.6
Supply and fixing of 8 Modular Horizontal / Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five
20
4007
200.37
Supply and fixing of 12 Modular Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five
35
8415
240.45
Supply and fixing of 18/24 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-I: Make:Legrand Mosaic/North west /M.K /G.M/L&T/Indo Siman/Salzar/G.M Four-five /Legrand Areator/Schneider Zen celo / MK Blenge
8
3846
480.82
Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex
8
26649
3331.19
Supply of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes: Crompton / Almounard / Havells Turbo Force
20
62974
3148.71
Supply and fixing of 3 mm thick laminated sheet of I.S.I Mark white or approved colour to be fixed with brass screws, cup washers on the existing T.W. Board duly removing the existing damaged Hylum sheet as directed during execution.
6000
6840
1.14
Supply of Linear LED Batten with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 125 lm/W. System wattage should not exceed 35W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a colour temperature of 6500K and CRI80. Driver of the luminaire shall have THD 10% and PF 0.95. The luminaire housing should be made of CRCA with a PC glossy diffuser. The driver shall comply to IEC 60598, IEC 62384 , IEC 61347-2-13, IEC 61547, EMI- CISPR15 standards.
Make: Philips BN308C LED40S-6500 L12O PSU WH
50
80500
1610
Fixing of given T5/T8 batten light luminaire on wall/Ceiling/Trusses/Channels,labour charges and giving necessary connections.
42
4044
96.29
Screen painting on the new existing tube light fittings, ceiling fans, Heaters, AC units etc. indicating TTDs area, location, No.. The size of the letter should be minimum 25 mm. The work will have to be done at site.
1000
2010
2.01
Supply and Fixing of 4 feet T5, 18W LED Batten type fitting with Internal driver with Polycarbonate Material suitable to operate on 230V AC, 50 Hz power supply as per following specification.
40
9640
241
Supply of 1400mm ( 56" ) BLDC ( Brush less Direct Current ) Ceiling fan with double bearing to operate as 230 V , Single phase, 50 Hz AC Supply. including transportation
40
91960
2299
Supply and Fixing of 2 feet T5, 9W LED Batten type fitting with Internal driver with Polycarbonate Material suitable to operate on 230V AC, 50 Hz power supply as per following specification.
10
2240
224
Supply of 120W LED Day light integral IP 66 Street light / Road light fitting with high pressure diecast aluminium body suitable for mounting to the existing poles with 40mm to 60mm outer dia bracket (Adjustable stem pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with lens for distribution of lighting and suitable to operate on 230V, 50 Hz AC supply as per the following specification.
Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus.
Specifications:-
16
80692
5043.26
Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.
20
5315
265.78
Cutting open BT road surface (As well as Asphalt concrete up to 75 mm thick) including water bound macadam.
20
2520
126.02
Cutting open cement concrete road
16
61554
3847.15
Cement concrete using 20mm HBG metal in CC (1:3:6) laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete.
16
82976
5186.05
Supply and fixing of LT cable route indicators made out of cast iron fixed to one meter long 1''x1''x1/4'' MS angle 4'' bent at one end buried in the ground and the other end fixed with G.I. bolts and nuts to the cable route indicators as directed during execution.
4
2068
517.05
Manufacture, Supply and delivery of 150 mm dia NP-2 Class RCC Socket and spigot pipes conforming to B.I.S 458/2003 at Ex-factory (Rate per meter of effective length) excluding, Transportation Taxes & Duties. Make: As per B.I.S 458/2003
100
24045
240.45
Supply Laying and Transportation of Outer dia 90mm and inner dia 76mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.
120
23062
192.19
Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.
16
3348
209.31
Supply and run of 4 core 2.5 Sq.mm PVC insulated and sheathed FRLS copper round cable for voltage upto 1100V as per IS 694/1990. Makes: Finolex/ RRkabel/ Havells/ KEI/ Polycab/ Gloster/ Goldmedal/ GM.
40
5724
143.12
Supply and Fixing of Premium make CPVC Pipes and Fittings of 28.60mm OD pipe - SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS15778:2007)
60
8449
140.83
Supply of 4.0 KVA Stabilizer. Makes: V-Guard / Real Guard / Uni Stab / ITL.
2
6182
3091.46
Installation of Split Air Conditioners.
2
3663
1831.98
Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of split AC unit.
2
2747
1373.98
Providing 2 runs of 1/2" x 1/4" Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air- Conditioner including foaming etc., complete. Make: Copper:Totaline /Nippon /Mandev.Nitrile Insulation: Kflex/ Totaline /Armaflex
20
18548
927.44
Supply and Fixing of ISI Mark 50mm outer dia medium grade (2.85mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately)
Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal
40
6728
168.21
Providing of Independent Chemical Earthing after excavating an earth pit of size1.5 m X 0.9 m X 2.05 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.15 m) with the following specification: (a) Supply of Copper Earth Electrode, 38 mm dia wall thickness 1.60 mm, 2 meter long, inner space of pipe filled with high conductive material along with 1 bag (25Kg to a bag) of Earth Life Compound. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing.
1
15511
15511.08
Supply of 1.5 Ton capacity DC Inverter Hot & Cold type Split AC units suitable for operation on 230V,50Hz,1-Phase AC supply, with 3mts of copper piping, insulation kit and 4mts of 4core copper flexible chord with cord less remote control etc., with the following specification. Technical specifications: Capacity-1.5Ton Split type Inverter-DC Inverter Hot&Cold series Star rating- 3star Condenser type-Copper Cooling capacity(BTU/hr)-17100/8550 (5970-17740) Power consumption(cool)-1600/483watts (375 to 1750) Heating capacity(BTU/hr)-17100(4450-17700)
2
83000
41500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements