Tirumala Tirupati Devasthanams Tender

Providing Drip Irrigation System at Tirumala;Cement Concrete C.C(1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Providing Drip Irrigation System at Tirumala;Cement Concrete C.C.(1:2.5:5) -Grade M15 using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Providing Drip Irrigation System at Tirumala;Finishing the flooring with rough kadapa slabs of 40 mm to 50 mm thick set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar (1:3) duly filling joints neatly, including curing cost & conveyance of all materials like cement, sand, water and flooring stones, etc. complete for finished item of work.

Providing Drip Irrigation System at Tirumala;Plastering in Cement mortar (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions.

Providing Drip Irrigation System at Tirumala;Construction of 110 mm thick Brick partition walls in CM (1:5) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. Complete

Providing Drip Irrigation System at Tirumala;Supply of G.I. pipes for the following dia of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked (TATA make or equivalent)

Providing Drip Irrigation System at Tirumala;100mm dia

Providing Drip Irrigation System at Tirumala;80 mm dia pipe

Providing Drip Irrigation System at Tirumala;Supply of G.I. Specials of approved make / ISI marked

Providing Drip Irrigation System at Tirumala;100 mm dia G.I. Elbows/bends

Providing Drip Irrigation System at Tirumala;100 mm dia G.I.Tees

Providing Drip Irrigation System at Tirumala;100 mm dia G.I.Couplings

Providing Drip Irrigation System at Tirumala;80 mm dia G.I. Elbows/bends

Providing Drip Irrigation System at Tirumala;80 mm dia G.I.Tees

Providing Drip Irrigation System at Tirumala;80 mm dia G.I.Couplings

Providing Drip Irrigation System at Tirumala;80mm dia G.I Reducing socket to any smaller size Approved make / ISI marked

Providing Drip Irrigation System at Tirumala;Providing, installation, testing and commissioning of dual Plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: BDK / NEU-G / Leader/ Zolotto / SANT/Honeywell

Providing Drip Irrigation System at Tirumala;SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE. (1/2" TO1")

Providing Drip Irrigation System at Tirumala;Supply & Fixing for Solvent Cement Permafix ( PFSP1LTIN) 1000 ml

Providing Drip Irrigation System at Tirumala;Supply of single socket PVC pipes and fittings of following diameters with ISI mark

Providing Drip Irrigation System at Tirumala;Supply of 110 mm dia 3 M Single socket pipe 6 kgs/cm²

Providing Drip Irrigation System at Tirumala;Supply of 90 mm dia 3 M Single socket pipe 6 kgs/cm²

Providing Drip Irrigation System at Tirumala;Supply of 63 mm dia 3 M Single socket pipe 6 kgs/cm²

Providing Drip Irrigation System at Tirumala;Manufacture, supply & Delivary of HDPE pipes confirming to IS : 4987-1995 including tranportation to any where in AP, excluding all taxes and specials atc complete ( supply up to 90 mm dia in coil and above 90 mm dia straight length)

Providing Drip Irrigation System at Tirumala;Labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., any dia including fixing necessary fittings like bends, plugs, couplers, junctions, tees,etc., with solvent jointing as per standard practice

Providing Drip Irrigation System at Tirumala;Fixing of PVC pipe 110 mm dia single socket pipe of 6 kgs/cm²

Providing Drip Irrigation System at Tirumala;Fixing of PVC pipe 90 mm dia single socket pipe of 6 kgs/cm²

Providing Drip Irrigation System at Tirumala;Fixing of PVC pipe 63 mm dia single socket pipe of 6 kgs/cm²

Providing Drip Irrigation System at Tirumala;Laying, jointing of PVC/HDPE pipes as per BIS No.7634 part-III/75 for PVC and BIS No.7634 part-II/75 for HDPE pipes including trench excavation and refilling.;PART - B;Supply of the following PVC pipe fittings confirming to IS standards with PN-10 Heavy duty.;110 mm dia single Tee;90 mm dia single Tee;63 mm dia single Tee;110 mm dia plain Elbow;90 mm dia plain Elbow;63 mm dia plain Elbow;110 x 90 mm dia reducers;90 x 63mm dia reducers;Supply & Fixing of JCM 50 M3/HR-M 3" SIN with M.MF ,Machine pump design flow having an suitable inlet connections and back wash assembling for removable of algae, trash, silt at regular intraval in the incomming water with fine sand media bottom of filter & maxumum working presure of 7 bars Excluding GST).;Supply & Fixing of super flow filter 50 M3/HR-M 3" , having an suitable inlet connections, to create a helical effect in the incomming and so minimizing cleaning frequancy, 3/4 outlet for flushing at bottom of filter & maximum working presure of bars( excluding GST).;Supply,Fixing & Commissioning of Drip system Providing, fixing & commissioning of Drip system of approved make along with all the necessary fittings & accessories as per manufacturers specification & as per directions of EIC. Rate includes transportation, labour charges, tools/tackles, materials, all sorts of taxes & as required as per site condition for completion of job etc.( Plain lateral, gromete, take off, end cap);Supply & Fixing of PC Dripper 4.2 /8.0LPH;Supply & Fixing of lateral emitting pipe joiner 16x16 OD high quality bars to grab turbing for a secure fit. Unique barb design to reduce insertion force. Non obstrusive black coloures fittings of 16 mm BardxBarb joiners including cost and conveyance of all materials and labour charges etc. complete-joiners(excluding GST).;Supply & Fixing of PR relief valve plastic 4" (Excluding GST);Supply & Fixing of DBL ACT AIR/VAC RELEASE VALVE 32 mm(1) + D 3750 Air release valve. The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar including cost & conveyance of all materials and labour charges etc. complete-valve(excluding GST).;Supply & Fixing of ARV ASSEM, W/O AIR VALVE1"X110MM (excluding GST);Supply & Fixing of PVC CONTROL VALVE 63MM Teflon seal plain. Security pivot to maintain lever in space, double water tight joint, direct injection stem non mechanical with a base which permits maximum penetration in to the valve of size 63 mm with pressure rating PN-10 including cost and conveyance of all materials and labour charges etc. complete-assessories( excluduing GST).;Supply & Fixing of self closing Flush valve 63mm that are installed at the end of the irrigation line for effecting flushing of particles, sediments and other impurities from the water including cost and conveyance of all materials and labour charges etc. complete. FLUSH VALVE 63 mm -Accessories (excluding GST).;Supply & Fixing of 2" dia pressure gauge GLYCERINE FILLED & CORK 1/4" pressure gauge glycrine filled & cork 1/4 '' valve and filter accessories (excluding GST).;Supply & Fixing PVC Tail Piece with flange 110 mm X 6 kg/cm2 (excluding GST).