Tirumala Tirupati Devasthanams Tender

 -do- in CM(1:5) 12mm thick 

 -do- in CM(1:5) 20mm thick 

Supplying and  fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design  including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel Gr-I paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Hire charges for engaging tractor for shifting of department materials to the specified places as directed during execution.

Painting two coats for New walls with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter over a cemet priming coat (TOTAL 3 COATS) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Man / Woman Mazdoors 

Welder  2nd class 

Hire charges for Welding Set (machine) including fuel charges (but excluding crew charges and electrodes ) to meet the emergency works as directed during execution.

Supply of Welding Electrodes 4mm dia for welding works.

Providing and fixing precast concrete blocks (interlocking pavers) using not lessthan M40 grade paver blocks and thickness not less than  80 mm for medium traffic areas conforming to IS 15658-2006 of all shapes and designs as per the specification, over sand bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compactor having 3 tonne compaction force there by forcing part of sand underneath to come up in between joints. final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as interlocking pavers, sand etc., Labour and equipments such as cutting machine, lift, loading & unloading to work site clearing, bringing required all materials for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution by the Engineer-in- charge of the work. Note: i. Thickness of interlocking pavers and underlaying sand bed shall be as per the Table 1 of IRC SP:63-2004 based on the traffic and type of road. The data can be worked out accordingly. i.e. 1.Cycle tracks and pedestrain footpaths, 2. Residential streets, 3. Industrial streets, bus and truck parkings areas and 4. Arterial streets, etc.ii. The base and sub-base over which interlocking pavers are to be laid shall also be as per the Table 1 of IRC SP:63-2004 based on the traffic and type of road/ground surfaces.

Supply of Hot dipped Galvanized Iron Chain link mesh  2"x2" (50 mm x 50 mm) - 8 Gauge (4mm) as per IS: 2721-2003 including the cost and conveyance and all incidental charges, etc., complete as directed during execution.  The chain link mesh shall have a zinc coating of type 'heavy' with mass of coating 290 gm/sqm as per IS:4826-1979 (Reaffirmed 2001) Table.1.  The mesh shall be provided with heavily coated galvanizede line wires of 4.50 dia. as given in Table.1 of IS:2721-2003.

Providing,laying,spreading and compacting graded stone aggregate(IRCsize HBG crushed stone aggregate confirming toTable 400-12 & Table 400-13 )to Wet mix Macadam specification including premixing the material with water at OMC in Mechanica lmixer ,carriage of mixed material by Tipper to site, laying inuniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory roller 8-10Tonnes weight to achieve desired density including lighting ,barricading and maintenance of diversion etc.,as per Technical specification vide clause No.406 of MORTH (5thRevision)etc., complete in all respects and as directed by Engineer-in-charge during execution

Supply of MS Flats/ Angles/Channels/Sections/ of different sizes including cost and conveyance of all materials etc complete as directed during execution.

Rupees Eight Lakh(s) Thirty Six Thousand Eight Hundred Eighteen And Paise Forty Five Only

Rupees Eight Lakh(s) Thirty Six Thousand Eight Hundred Eighteen And Paise Forty Five Only