Tirumala Tirupati Devasthanams Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Tirumala Tirupati Devasthanams Tender
Civil And Construction
Building Construction
Opening Date15 Mar 2024
Closing Date30 Mar 2024
Tender Amount₹ 32,07,709
Costs
EMD
₹ 32,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
733252Bid Award Id
ViewTender No
85/EEVII/TTD/2023-24Tender Authority
Tirumala Tirupati Devasthanams ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work- Ordinary soil-Manual means up to 3m depth
Note: Cost of dewatering may be added, where required, up to 5% of labour cost. Assessment for dewatering shall be made as per site condition
5
1364
272.93
Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.
5
4850
970
Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.
5
23138
4627.67
Cement Concrete (1:2.5:5)-Grade M15 using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.
Note:- Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.
5
27034
5406.84
Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480cu.m,6mm HBG Crushed metal 0.320cu.m,sand 0.400cu.m and cement 350Kgs with water cement ratio of 0.53(185.50 ltrs/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, centering charges, shuttering charges for finished item of work (APSS No. 402)
Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.
-
-
-
- do - for 50 mm thick precast slabs using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards, with necessary reinforcement excluding cost of steel and tying of grills, centering charges,but including cost of necessary form work etc., complete as directed by the department.
30
12688
422.96
... do ... for fret work for precast blocks (Jollies) of 50 mm finished thickness using 10 mm graded HBG crushed metal from any source conforming to the relevant ISI standards with necessary reinforcement excluding cost of steel and tying of grills but including cost of necessary form work and including smooth finishing complete as directed during execution.
6
2537
422.96
Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of Fe 500/Fe-500D (as per IS 1786 - 1979) of below 36 mm for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).
Note:- Unless othewise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement.
0.15
12713
84756.08
Construction of Brick Masonry in CM(1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.
14
101530
7252.2
Random Rubble masonry in Cement mortar (1:6) using granite stones from any source confirming to the relevant ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications (excluding cost of bond stones )
5
21206
4241.22
Plastering in Cement mortar 12mm thick & 20mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions
-
-
-
in cm (1:5) 12 mm thick
100
25426
254.26
in cm (1:5) 20 mm thick
50
19750
395
Supply of M.S Tubes & Pipes of all diameters as per IS: 1161
200
17996
89.98
Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position.
200
8662
43.31
Providing Unplasticized PVC SWR Rain water downfall pipes for the following dia with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.
-
-
-
- do - 110 mm dia PVC pipe with wooden block of size 150mmx50mmx50mm
200
55182
275.91
- do - 75 mm dia PVC pipe with wooden block of size 100mmx50mmx50mm
200
33454
167.27
Painting with Ready mixed Synthetic Enamel paint in all shades -Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter, approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.
-
-
-
- do- Single coat for old wood work
65
3192
49.11
- do- Single coat for old iron work& old plastered surface
150
6823
45.49
-do- Two coats for old wood work & old plasterd surface
30
2471
82.38
- do- Two coats for old iron work
470
34577
73.57
- do - Three coats for new wood work
250
42770
171.08
Providing and applying wall putty of white cement or polymer or cement based putty of approved/standard make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls for old work
350
46599
133.14
Painting with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.
-
-
-
-do- Single coat for Internal walls for old work
410
17597
42.92
-do- Two coats for Internal walls for old work
410
29872
72.86
Painting with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.
-
-
-
… do … Single coat for External walls - old
330
33316
100.96
Polishing the old wood work with best French Sprit polish of two or more coats of approved quality and make including brushes to have an even shade and including linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution etc., complete.
30
5403
180.1
Supplying & Fixing Orissa Pan white glazed W.C of size 580 x 440 mm 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap ISI Mark or equivalent brand approved by the department.
13
23087
1775.97
Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of white glazed with 'S' trap with ISI mark or equivalent brand approved by the department
13
27348
2103.74
Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996
13
12139
933.78
Supply, Installation and commissioning approved make floor mounted close coupled EWC Suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved made etc., complete for finished item of work in all respects : Coloured - Grade I / Grade II
10
143041
14304.14
Supplying & Fixing Indian make Flat Back Wash Hand Basin of size 550 x 400 mm - Single C.P. Pillar cock 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block
10
19564
1956.46
Supplying and Fixing Pedestal for Wash Hand Basin with ISI mark or equivalent approved by the department.
10
13287
1328.76
Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make confirming to IS:2556-1995 with ISI mark or equivalent approved by the department.
5
5002
1000.45
Supply & fixing of 10 Litres capacity Single Flush PVC low level cistern with internal components & short bend.
5
8002
1600.57
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)
-
-
-
22.20mm OD Pipe - SDR 13.5
180
18124
100.69
28.60mm OD Pipe - SDR 13.5
400
58272
145.68
34.90mm OD Pipe - SDR 13.5
100
22923
229.23
54.00mm OD Pipe - SDR 13.5
120
62341
519.51
Supply of 25mm x15mm dia Elbow 90 degrees (Brass)
900
74691
82.99
Supply of 25mmx 25mm x 25mm dia Tees (Brass)
1050
178888
170.37
S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 50 mm NB Size
15
56608
3773.93
conveyance of wast meterials such as debris dismantling meterials etc., with a lead of 5 kms from work site including loading unloading but excluding cost of stocking charges etc., complete
55
5855
106.47
Engaging of second class carpenters, masons, Welders, painters, mechanics & Plumbers for maintainance works
40
32402
810.06
Engaging of man mazdoors/ women mazdoor for maintainance works
150
112471
749.81
Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.
100
12206
122.06
Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution
75
51716
689.55
Flooring with Antiskid floor tiles 1st quality of all series& shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sqm. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)
50
51431
1028.62
Supply of Non-skid red or white full body Ceramic floor tiles of size 450 x 450 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs
-
-
-
Finishing the sides of walls with Ist quality glazed wall tiles of following sizes of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10Sqm shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)
630
365437
580.06
Supply of glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs
-
-
-
Flooring with vitrified tiles of 1st quality of following varieties of series and shades set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete - for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)
80
103494
1293.68
Supply of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs
-
-
-
Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 4mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 4mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution .
30
5484
182.81
Supply and fixing of glow sign radium stickered Text / sign (or) picture of different sizes directly on the glass door partitions/Sheets/Floors/Roads/walk ways/walls etc., as directed during execution using glow sign radium stickers one layer including cost and conveyance of all materials etc., complete.
30
2313
77.12
Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame
50
182631
3652.62
Supply and fixing of door frame made of hollow extruded PVC section having dimensions of 40 X 57mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be mitre-cut/ welded. PVC DOOR FRAME
130
39128
300.99
SPECIALISED INJECTION GROUTING WITH CEMENT AND FREE FLOW ADDITIVES: a) Drilling of holes with power drilling machine to the required depth [12mm to 14mm dia holes] b) Fixing of Rubber Nozzles with cement and quick setting, Rapid hardening compound putty - Rapidstrong qs or equivalent. c) Grouting of holes with 140 PSI Grout pump with cement slurry mixing with Specialized Free flow, Non-shrink Grout additive - RAPIDSTRONG GROUT ADMIX (Armstrong ) /POWER n GROUT ADMIX (EBT) / CEBEX 100 (Fosroc )/ ZORIGROUT GP1 (PMCC) / SIKAGROUT ANCHKOR NSQ (Sika) /WATERSHIELD GROUT ADMIXi.e., 250 Grams per bag of 50 Kgs Cement add required water to make slurry form. d) After completion of grouting, Remove the Rubber nozzles e) Later sealing of the hole with polymer cement putty - ROOFCRETE AR (Armstrong ) / ZORIGROUT CMG (PMCC) / POWER n GUARD ARM (EBT) / WATERSHIELD AR / Fosroc NITOBOND AR + Cement.
* FOR STRENTHENING AND SEAL THE POROSITY OF THE CONCRETE TO ARREST THE LEAKAGES, DAMPNESS, LEAKAGES OF CONSTRUCTION JOINTS: (FOR TERRACE /CEILING / RCC RETAINING WALLS BASEDMENT FLOORINGS / WATER TANKS / RESERVOIRS / TOILETS etc.,)
450
80257
178.35
SPECIALISED FIVE LAYER SYSTEM OF WATERPROOFING TREATMENT TO THE TERRACE WITH FOLLOWING SPECIFICATION.
150
94153
627.69
Providing and laying five layer water proofing cum heat insulation treatment (MIX GUARD HR5) over existing roof slab, all as directed by Engineer-in-charge and as per the following specification: Arresting roof leakage by providing five layer treatment with MIX GUARD HR5 – five layer system of FAB Chemicals or equivalent elastomeric water proofing and heat reflective coating comprising of the following:
-
-
-
A.Surface preparation – Cleaning the whole area with wire brush. Chipping all loose/dead mortar thoroughly. Cleaning the entire area with high pressure water jetting to remove all loose particles/grease/oil/dust/dirt/curing compound etc. Surface cracks must be filled with Mix Build GP and wide cracks must be cut and repaired with Mix build SR polymer modified repair mortar.
B) Application of Mix Guard HR5 – five layer system with brush.
-
-
-
1. First layer – MIX PRIME AC-100
Apply base prime coat using Mix Prime AC100 compound which is produced by mixing Mix Prime AC-100 with water and cement at the ratio 2:1:3 (Mix prime AC 100 : water : cement) by volume with a slow speed drill with paddle. This compound shall be applied with sufficient thickness to cover the holes/pores/cracks @ 1 lit/Sqm area (0.35 Lt of MIX Prime AC100/Sqm)
-
-
-
2. Second Layer – MIX MAT GFM 70 / 50
Mix mat GFM70/50 Synthetic fibre reinforced mesh shall be spread on the top of the primer/in mix with Mix prime AC100 in the wet condition and allow to dry for a period of 6 to 8 hours. A minimum overlap of 100 mm to be provided at the joints i.e. at 1.10 Sqm/Sqm. The Mix mat GFM Mesh shall confirm to the technical specification as per the manufacturers data sheet (40 Gram / Sqm as a weight )
-
-
-
3. Third Layer – MIX PRIME AC
Apply one coat of Mix Prime AC water based acrylic primer (with undiluted material) over the MIX mat GFM mesh @ 0.25 Kg/Sqm as a water tight primer in white colour and allow to dry for a period of 6 hours.
-
-
-
4. Fourth layer – MIX GUARD HR (Base Coat)
Apply one coat of Mix Guard HR acrylic based water proof and weather proof coating in white colour (with undiluted material) @ 0.50 kg/sq.m as a membrane on top of Mix prime AC and allow to dry for a period of 6 hours.
-
-
-
5. Fifth Layer – Mix Guard HR Extra (Top Coat)
Apply one coat of Mix Guard Hr Extra acrylic based fibre reinforced water proofing and heat reflective membrane in white colour on top of Mix Guard HR base coat (With undiluted material) @ 0.50 kg/sq.m. And allow to dry the system for period of 24 hours to allow foot traffic.
-
-
-
Note: All the materials namely Mix Prime AC100, Mix Mat GFM70/50, Mix Prime AC, Mix Guard HR and Mix Guard HR Extra shall be procured for the entire work order quantity based on the consumption/coverage area as specified in the specification and shall be ensured by Engineer-in-charge. The Mix Guard HR5 layer system shall be carried out as per FAB Specifications.
-
-
-
Tensile strength : 6.00 N/mm2 (ASTM D412 – 87)
Adhesion to substance : 1.5 N/mm2 (ASTM D4541)
for MIX PRIME AC100 slurry with HP tiles,
cementitious substrate and subsequent layers.
Appearance: White/Grey/Terracotta liquid components
Dry film apperance : Joint free membrane
Density : 1.3 gm/cc
-
-
-
Tear strength : 17 N/mm2 (ASTM D1004-76)
Elongation at break : 200% for the system (ASTM D638)
DFT of cured membrane : 1500 to 1700 microns Total Solids content: 68% + 2% .
Water penetration : No leak at 7 bars +ve side (DIN 1048)
Application temperature : 5 deg C to 50 deg C
Touch dry: 2 hrs at 25 deg C Recoatable : 6-8 hrs at 25 deg C Full cure: 7 days.
-
-
-
(OR)
-
-
-
SPECIALISED FIVE LAYER SYSTEM OF WATERPROOFING TREATMENT TO THE TERRACE WITH Roofcare-prc 5 Systems or equivalent ( ROOFCARE PRC 5 (Armstrong) / ZORICOAT PFC 5 (PMCC)/ POWER SAC 5 L (EBT)/ WATERSHIELD 5 LWC.
-
-
-
a). Ist Layer Black coloured chemcial treatment : Providng and application of one coat of High bonding, flexible bituminous polyurethane blended bituminous coating with – Roofcare prc 5 systems Confiming to ASTM-G 154 -2000 or equavalent Ist Layer diluting with water at 1 : 1 ratio as a primer coat at a consumption of 200ml per Sqm.
-
-
-
b). IInd Layer : Providing and laying of Fibre Mesh 40 GSM, with 1 Mtr width and 50mm overlap on the primed surface.
-
-
-
c). IIIrd Layer Grey coloured coating : Providing and application of one coat of Acrylic rubberized elastomeric flexible waterproof grey coating with – Roofcare prc 5 systems ASTM-C 836 or equavalent or equavalent diluting
with 50% of water at a consumption of 400ml per Sqm.
-
-
-
d). IVth Layer white colured coating : Providing and application of one coat of High solid, cold applied, Fibre reinforced acrylic elastomeric waterproof membrane off white coating –Roofcare prc 5 systems Confiming to ASTM-G 154 -2000 or equavalent coating (add the water upto 200ml ) (Consumption of 350ml per Sqm ).
-
-
-
e). Vth Layer super white reflective coating : Application of one coat of 100% pure acrylic solar reflective pure white coating withRoofcareprc 5 systems Confirming to ASTM -C 297 or equavalent solar refective coating diluting with 20% of water (Consumption of 300ml per Sqm ).
-
-
-
Note: THE ABOVE TREATMENT WILL BE GUARANTEED FOR 5 YEARS
-
-
-
Supply of Country wood scantlings ( Vepa / Neredu ) 2 to 3 meters
2.5
123644
49457.67
Labour charges for wrought and put up for wood scantlings
2.5
54918
21967.22
Labour charges for fixing door frames & shutter
60
25038
417.3
Supply and fixing of Flush door shutters, solid bond wood block board type with commercial ply on both faces conforming to IS:2202 of standard make solid core flush doors , with Commercial facing both sides with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, including cost of screws etc., complete ( excluding cost of other fixtures which will be paid separately, but including labour charges for fixing the fixtures).
130
351284
2702.19
- do -30 mm thick Flush Door Shutters, Conforming to IS 2202 solid core flush doors , with one side Teak veneering and other side Commercial facing standard make.
-
-
-
Providing and fixing in position aluminium windows and ventilators of Jindal/Hindalco or equivalent make as per approved drawings with sliding shutters using four track window frame of size 122.2 x 31.75mm, for bottom section 1.1 mm thick, weight 1.205 kg/m, sides and top sections 1.2 mm, thick weight 1.093 kg/m; shutter section comprising top and bottom section of size 40mm x 18 mm wall thickness 1.25 mm. weight 0.417 kg/m; shutter side outer 40mm x 18mm, wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40 mm x 26.7 mm, wall thickness 1.1mm, weight 0.469 kg/m, shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles, tower bolts etc., providing and fixing 5mm thick plain glass for shutters fitted with rubber beading including cutting to required length, joints metered subdividing the frame tennoned and rivetted in the assembled frame to be stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams: cills as the case may be with necessary steel screws, rawl plugs or teak wood gutties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pre-treated for removal of any dust and coated with greasy materials for non adhesion of mortar and other sticky materials (this coating should be cleaned after installation) including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.
10
39878
3987.89
- do - using aluminium section anodized to 12 - 15 microns.
-
-
-
Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile
Roofing sheets with 0.47mm thickness ((Total Coated Thickness-TCT)), Coating: Zinc coating Z120 GSM. Tensile strength: 300 MPA. (Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc., complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW).
Note:- Galvalume sheet of 300 Mpa is to be used for crimping (curved portions)
35
17591
502.62
Supply of 7.5mm thick Aluminium Grill (as approved by the department) 3.58 Kg/Sqm.
40
44345
1108.64
supply and fixing angle stop cock 12.7mm (1/2")dia first quality Indian make heavy duty.(400 grms)
10
4983
498.35
Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated
10
1068
106.85
Supply of 12mm x 250mm ANODISED ALUMINIUM ALDROPS sliding door bolts
10
2341
234.11
Supply of Anodised Alluminium tower bolts 10mm x 250mm long dia with ISI Mark IS 204
10
1467
146.75
Supply of 150mm long Anodised Alluminium Door handles IS 208
10
1306
130.68
Supply and hire charges for plant & machinery For Maintenance works by TRACTOR
25
14219
568.78
Supply of Hot dipped Galvanized Iron Chain link mesh of 2"x2" (50 mm x 50 mm) - 8 Gauge (4.0 mm) as per IS: 2721-2003 including the cost and conveyance and all incidental charges, etc., complete as directed during execution. The chain link mesh shall have a zinc coating of type 'heavy' with mass of coating 290 gm/sqm as per IS:4826-1979 (Reaffirmed 2001) Table.1. The mesh shall be provided with heavily coated galvanizede line wires of 4.50 dia. as given in Table.1 of IS:2721-2003.
50
29349
586.99
Supply of Hot dipped Galvanized Iron Chain link mesh of 3"x3" (76 mm x 76 mm) - 8 Gauge (4.0 mm) as per IS: 2721-2003 including the cost and conveyance and all incidental charges, etc., complete as directed during execution. The chain link mesh shall have a zinc coating of type 'heavy' with mass of coating 290 gm/sqm as per IS:4826-1979 (Reaffirmed 2001) Table.1. The mesh shall be provided with heavily coated galvanizede line wires of 4.50 dia. as given in Table.1 of IS:2721-2003.
50
22547
450.95
Labour charges for fixing various sizes of G.I Chain links and tying in position to the posts / angles or supports with G.I wire including the cost of the G.I wire etc., complete as directed during execution ( excluding cost of G.I chain links angles, posts, bolts and nuts) and fixing with bolts and nuts to the angles.
100
1414
14.14
(Rupees Thirty two lakhs seven thousand seven hundred eight and paise eighty six only )
-
3207708
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements