Tirumala Tirupati Devasthanams Tender

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Cement Concrete using (1:2.5:5) 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including centring charges, curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS: 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push-on-joint (rubber gasketed jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation and all taxes,

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;- do- 300 mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 200 mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Lowering the C.I pipes, D.I Pipes and Fittings with S/S ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No: 3114/85.

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 300mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 200mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Jointing C.I/D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete as per BIS. No. 3114/ 1994/ 12888/ 1987.

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 300 mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 200 mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Centrifugally Cast (Spun) Ductile Iron fittings confirming to IS: 9523/ 2000 having dimensions as per table. The rates mentioned here under are for fittings, Zinc coated externally with inside mortar lining (with finishing as per class 13/ IS: 9523/ 2000) (ex-works) including transportation charges but excluding taxes and duties, etc., up to 500 mm dia (flanged sockets, Tees, Double sockets, Bends, etc., ).

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Manufacture as per BIS: 12820/89 with S.B.R. Quality Rubber confirming to BIS: 5382/85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes anywhere in A.P. F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking but excluding all taxes.

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 300mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 200mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Supply and delivery of Rubber packing including conveyance, etc., complete but excluding taxes ? 3 mm/ 6 mm thick

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Supply and delivery of Bolts and Nuts with double washers including conveyance, etc., complete but excluding taxes (1/2? to 1?)

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/ SG-400/15 or GGG-50/ SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating (EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/ PTFE/ EPDM/ NBR and generally conforming to DIN / BIS / AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and including transportation. - 100mm dia, PN 1.6 Mpa

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/ SG-400/15 or GGG-50/ SG-500/7 or Equivalent asper IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation for1.6 Mpa. without by-pass

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;For Fixing on 100 mm DI pipe line.

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Labour charges for lowering and keeping in position of C.I. Sluice valves, Reflux valves and Scour valves excluding cost of bolts, nuts, rubber insertions, slice valves and tails pieces

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 100 mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Cutting C.I. / D.I. pipes of following dias without water in mains

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do-300 mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do-200 mm dia

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;supply & Delivry of pig lead 99.99% pure execluding taxes but including conveyance etc., complete.

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Manufacture, and supply of Mild stee pipes using MS plate manufactured with electric- resistance welding (ERW) or submerged arc welding (SAW) o=process longitudinally or spiral welded from MS plates confirming to IS; 2062- 2011, IS 3589- 2001, IS:5822- 1994, Grade - A/B in suitable lengths to suit the site conditions as directed by the departmental officers and all other required materials and excluding taxes as per the above specification inclusive of cost of all jointing materials labour charges , fabrication, transportation , other incidental and operational charges etc., complete.

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 200 mm dia of 6.00 mm thick

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 300 mm dia of 8.00 mm thick

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Painting with ready mixed synthetic enamel paint in all shades Grade-I having VOC (volatile organic compound) content less than 50gms /lit approved colour and make over priming coat with ready mixed Red oxide metal primer including brushes to have and even shade including cost and conveyance all of all materials as directed during excution complying with standard specifications etc., complete. -do- Two coats for new Iron work

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS Special including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange).

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 200 mm dia. x 15 mm thick

Re aligning the existing pumping pipe lines with DI pipes at back side of Panchajanayam Rest House;-do- 300 mm dia. x 15 mm thick