Tirumala Tirupati Devasthanams Tender

Supply of Rubberised coir mattresses of overall size of 1905 mm x 915mmx 100 mm with 25 mm thick top layer of polyurethane foam with a density not less than 27 Kg/cum as per IS 7933-1975 over 75mm (3") thick coir base with an inner protective cover and outer PC cloth of 120 gsm. The coir mattresses should be standard and approved make, best quality confirming to IS: 8391:1987 with ISI mark and the density of coir should be FIRM grade standards. The weight of coir mattresses should be 11.84 kg (including PC cloth cover) minimum etc., complete as directed by the department. Each coir mattresses should be printed "TTD" and month and year of supply on outer cover and should be identical. The rate is including all taxes and other incidental charges etc., complete. Note: 1) The rate is including all taxes (excluding GST). 2) FOR at Ahmedabad work site (Gujarat State) including conveyance and placing at site.

Supply of polyester fibre pillows of overall size 17 inches X 27 inches along profile filling with HBPL -1 (High bulk pillow, Grade-1) fibre (7D, 64mm) filling weight not less than 650 grams net, the fabric Should be 110 grams/sqm etc. The rate is including taxes and other incidental charges etc., complete. Note: 1) The rate is including all taxes (excluding GST). 2) FOR at Ahmedabad work site (Gujarat State) including conveyance and placing at site.

Supply of S.S. Dining Tables (4 Seater) to work site at TTD Kalyanamandapam, Ahmedabad inclusive of all taxes (but excluding GST) and including transportation (FOR to Ahmedabad, Gujarat State) etc., complete as specified in drawings with the following specification. Over all sizes: 2400 x 500 x 750mm. Top frame alround with S.S. angles 32 x 32 x 3 mm and three width wise supports and one length wise middle support with S.S. flat of size 25 x 5mm. Top Sheet: 16 G SS 304 grade sheet double bended on all sides. Legs: Six Legs with 38mm dia. 16 G S.S. pipes with adjustable nylon bullet feet, cross supported with 25 mm dia S.S. pipe 16 G at a height of 150mm from bottom (Length wise two central supports and width wise three supports. All S.S. sheet, angles, pipes are of 304 grade.

Supply of Co-polymer poly propylene plastic moulded chairs with arms of Approved or any equivalent design model confirming to IS 13713-1993 specification and not less than the following physical parameters a. Seat height from floor level measured at centre 430 mm b. Seat width and depth at middle place are 410 mm and 420 mm respectively. c. back rest width and height 285mm and 390mm respectively. d. total weight of plastic chair 2.58 kg. (The rate including other incidental charges etc., complete) (excluding GST).

Note: 1. The height of the seat should be measured at front side 2.The measurements are to be taken up along the profile 3. The measurements are to be taken up at mid points 4. The height of back rest should be measured from seat top at centre. 5. The rate is including all taxes (excluding GST). 6. FOR at Ahmedabad work site (Gujarat State) including conveyance and placing at site.