Tirumala Tirupati Devasthanams Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Tirumala Tirupati Devasthanams Tender
Civil And Construction
Building Construction
Opening Date19 Mar 2024
Closing Date4 Apr 2024
Tender Amount₹ 1,05,07,617
Costs
EMD
₹ 1,06,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
734597Bid Award Id
ViewTender No
176/SE-III/TTD/TPT/2023-24Tender Authority
Tirumala Tirupati Devasthanams ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling doors and clear storey windows, ventilators etc.,(wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc complete and stacking them within 100 metres lead. - do - for Not exceeding 3 Sq m Area.
22
5297
240.79
Dismantling, clearing away and carefully stacking materials useful for re-use. - do - Flat and pan tiles or Mangolre tiles over flat tiles with out roof timbers.
190
5169
27.21
Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidengal, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work.
- do - for Ordinary soil-Manual means upto 3m depth.
145
40209
277.3
Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.
120
189107
1575.91
Filling with useful available excavated earth (excluding rock) in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges hire charges of T & P etc., complete for finished item of work.
145
5763
39.75
Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.
85
467880
5504.74
Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials INCLUDING cost of Centering & Scaffolding charges, shuttering charges all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.
-
-
-
Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 kg/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.
-
-
-
- do - for Footings
12
121017
10084.81
- do - for columns up to basement level ( Pedastals)
3
32028
10672.5
- do - for columns in First Floor
4.5
59927
13321.99
- do - for columns in Second Floor
4
56116
14038.22
- do - for columns in Third Floor
1.25
18510
14753.09
- do - for Plinth beam
2.5
31640
12680.42
- do - Roof beams in First Floor
6
74462
12402.81
- do - for Roof slabs in First Floor
11
77613
7054.11
- do - for Roof slabs Third Floor.
1.5
11374
7590.11
Hire charges for Centering & scaffolding - unsupported height up to 3.66 m of floor height using steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel centering plates etc., including curing and removing of centering etc., complete as directed during execution complete. Proper slopes to drain off wash / rain water shall be provided as directed. - do - for Roof slab up to 150mm thick.
-
-
-
- do - for First Floor
85
51668
607.86
- do - For Third Floor
11
7404
673.16
Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc.,- horizontal plain sunshades or lofts projecting from the face of the wall 65mm average thickness,80mm thick at the face of the wall and 50mm thick at the free end and cast monolithically with the lintels or tailed to the full thickness of the wall where there are no lintels using 20mm size graded machine crushed hard granite metal (coarse aggregate) from any source conforming to the relevant ISI standards including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, hire charges for steel centering & scaffolding charges, shuttering and Seigniorage charges etc., complete., and excluding cost of steel and its fabrication charges for finished item of work.
Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.
-
-
-
Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 kg/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.
-
-
-
- do - in 0.60 width ( in First Floor )
7
7714
1102.1
- do - in 0.60 width ( in Second Floor )
9
10170
1130.03
Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of specified grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement
4.4
391762
89036.87
Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480cu.m,6mm HBG Crushed metal 0.320cu.m,sand 0.400cu.m and cement 350Kg with water cement ratio of 0.53(185.50 ltrs/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as centering & scaffolding charges, shuttering chargesmachine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, for finished item of work (APSS No. 402) Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.
-
-
-
for precast slabs of 50 mm thick using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards, with necessary reinforcement excluding cost of steel and tying of grills,but including cost of necessary form work etc., complete as directed by the department.
7
3203
457.59
Note : The design mix shall be got designed by furnishing the information required as per clause 19.1.1 &19.1.2 of IS 456-2000 by the contractor at his own cost and get approved from the competent authority before execution. The cement considered for above M25 grade concrete is 380 kg/cu.m and the rate is arrived accordingly in the estimate. After the mix is designed and approved, if there is any variation in the quantity of cement, over the cement content adopted in the estimate, the same will be considered and paid/recovered at estimate rate + T.P ( Either increase or decrease in quantity adopted in the estimate). Payment will not be made for variation in the quantity of other materials such as coarse & Fine aggregates.
-
-
-
Construction of Brick Masonry in C.M (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.
-
-
-
- do - up to Basement level
50
383180
7663.81
- do - in First floor
37
287537
7771.96
- do - In Second Floor.
18
141037
7834.6
- do - In Third Floor.
15
118488
7897.21
Ornamental brick work with 2nd class bricks in CM (1:5) (using brick bats and madras terrace bricks), including cost and conveyance of all materials, labour charges, curing, lift charges etc., complete.
20
201628
10081.77
Construction of 110 mm thick Brick partition walls with C.M (1:4) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. complete
-
-
-
- do - in First Floor
190
198939
1047.06
- do - in Second Floor
140
156777
1119.86
Plastering in Cement mortar for the following proportions using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions
-
-
-
- do - in First Floor CM (1:3) 12mm thick.
335
99343
296.55
- do - in Second Floor CM (1:3) 12mm
45
14500
322.23
- do - in Third floor CM (1:3) 12mm thick
17
5914
347.89
- do - in First Floor (1:5) 12mm thick.
480
135662
282.63
- do - in Second Floor (1:5) 12mm thick.
350
107908
308.31
- do - in Third Floor (1:5) 12mm thick
70
23377
333.97
- do - in First Floor (1:5) 20mm thick
302
128611
425.86
- do - in Second Floor (1:5) 20mm thick
315
148329
470.89
- do - in Third Floor (1:5) 20mm thick.
95
49013
515.93
First class ornamental plastering in floors 1" to 1¼" thick with base plastering ½" to ¾" thick in C.M. (1:3) and top finishing ½" thick with CM (1:2) to bring the required ornamentation including fine rendering with neat cement including cost and conveyance of all materials, labour charges all incidental and operational charges, curing etc., complete finished Item of work in site for external surface as per approved drawings and as directed during execution including preparation and fixing pre-cast pillars wherever necessary (sand of fine variety is to be used).
57
123059
2158.93
Providing Weather Proof course with Screeding concrete in CC(1:2:4), 25 mm average thickness using 6 to 10 mm nominal size HBG crushed metal chips, screeding duly embedding 24 G chicken mesh with necessary overlaps etc., and finishing the surface neatly and rounding the edges at parapet walls, columns etc., including cost of chicken mesh and including cost and conveyance of all materials etc., complete and as directed during execution.
1.5
11441
7617.66
Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.
52
29830
573.69
Flooring with vitrified tiles of Double charged (with double layer pigment) / multi charged stain free full body (with homogeneous full body pigment for entire body thickness) porcelain vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete - for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)
190
256034
1347.54
Providing skirting to internal walls to the following heights / risers of steps with vitrified tiles of 1st quality of Double charged / multicharged stain free full body porcelain vitrifiedtiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set with adhesive (polymer modified cement based water resistatnt adhesive) of approved make@5.25 kgs/sqm paste of 3 to 6 mm thick bed for fixing floor tiles as per specifications and joint filler for pointing between tiles with selected colour to match the colour of tile including cost and conveyance of all materials,curing and incidental charges etc.,complete. in all floors.
37
50023
1351.98
Flooring with Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.30 kgs per sqm. jointed with neat cement to full depth mixed with pigment of matching shade, including cost of all materials like flooring slab, cement, sand and water etc., complete, including seigniorage charges, etc., complete for finished item of work and including the cost & conveyance of all materials.
120
73607
613.41
Finishing the sides of walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishesetc., scratchless, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711 ,IS:13712, IS:13630 (Parts 1 to 15) of any colourand finish in all shades and designs including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10Sqm shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls).
33
30877
935.67
Finishing the flooring with 18 to 20 mm thick machine cut and flamed finish Sadana halli white grnite of size 8'-0" length of standard size and approved over a bed of CM(1:6), 20 mm thick and set with cement slurry of 33Kgs/10 Sqm shall be used and joints pointed with cement duly mixed with colour pigment to match the colour of the granite stone slabs. The Granite slab should be laid in such a way that there should not be visible point. The rate is including cost and conveyance of all materials, curing, incidental charges etc., complete as directed during execution (excluding cost of polishing).
1185
3168160
2673.56
Supplying and fixing in position Flush doors of different sizes with 35 mm thick Flush Door Shutters solid bond wood black board type with commerical ply on both faces of standard make, Conforming to IS 2202 solid core flush doors , with Commercial facing both sides with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Single leaf using Best Indian Country wood (Vepa/Neredu) frames of size 75mmx100mm without threshold plate, including cost of M.S. "Z" Hold fasts of 230 x 50 x 6mm, M.S. Powder coated Butt hinges of 125 x 65 x 2.12mm, screws, nails, etc., complete (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).
50
266224
5324.49
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .
Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.
49
422171
8615.74
Three track three panels sliding door with fly proof S.S wiremesh (Two nos. glazed & one no. wire mesh panels) made of(big series) frame116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazingbead/double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)
-
-
-
Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.
2200
265760
120.8
Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing, lacquer finishing to present seamless finishing etc., complete as directed during execution.
240
172984
720.77
Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap: 580 mm x 440 mmSupplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap: 580 mm x 440 mm
1
1758
1758.29
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of make Hindustan/Neyser/Parryware make with P trap, plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 including of PVC low level system parry ware, slim line with internal components & short bend: 10 liters capacity single flush as directed during execution.
8
37446
4680.84
Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 withwaste fittings like rubber plug, chain,32 mm nominal size C.P.Fitting with parallel pipe thread conforming to IS:2963-1979and fitted with 15 mm nominal bore Chromium Plated PillarTap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/Esso or equivalent complete with standard CI bracketsincluding wooden block: 550 x 400 mm - Single C.P. Pillarcock
5
9840
1968.02
Supplying and fixing in position T.V. shape Mirror with Plastic frame size 609.60 X 457.20 mm with necessary wooden plugs NP screws making "T" holes in walls and making good the same in C.M(1:3) etc., complete.
4
2276
569.09
Supply & fixing towel rod (CP) of 24" long and 3/4 " dia.
10
4285
428.52
Supplying and fixing in position the following aluminium anodized hard wares including cost and conveyance of all the materials, labour charges for fixing etc., complete.
-
-
-
- do - Aldrops 16 x 300mm long with ISI mark, IS 2681
10
3967
396.78
- do - Aldrops 200mm long with ISI mark, IS 2681
4
1269
317.42
- do - Tower bolts of size 10 mm dia. X 250 mm long with ISI mark, IS 204
30
4659
155.31
- do - Tower Bolt-10 mm Bolt (IS:204) 150 mm Long
35
3452
98.63
- do - 125 mm long Door handles with IS 208
30
3639
121.3
- do - 12mm x 100 mm long Door handles with IS 208
20
1632
81.62
Supply & fixing of Unplasticized PVC SWR pipes for sanitary lines for the following dia with ISI:13592 Type -B mark with necessary including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.
-
-
-
- do - 75 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm
85
12847
151.15
- do - 110 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm
21
6070
289.08
- do - 160 mm dia 3 M Double Socket PVC/SWR pipe - 6 Kg/sq.cm
33
21735
658.65
Supply and fixing of 75 mm dia the following UPC/SWR pipe fittings of make Prince/ Sudhakar make or equivalent quality U.V resistant UPVC) pipe fittings (as per ISI standards )
-
-
-
- do - 75 mm dia - Plain Bend 87.5 Degree.
8
417
52.15
- do - 75 mm dia - Door Bend 87.5 Degree.
8
562
70.29
- do - 75 mm dia - Single Tee with Door
8
498
62.35
- do - 75 mm dia - Vent Cowl.
8
117
14.74
Supply and fixing of 110 mm dia the following UPC/SWR pipe fittings of make Prince/ Sudhakar make or equivalent quality U.V resistant UPVC) pipe fittings (as per ISI standards )
-
-
-
- do - 110 mm dia - Plain Bend 87.5 Degree.
8
698
87.29
- do - 110 mm dia - Door Bend 87.5 Degree.
8
906
113.37
- do - 110 mm dia - Single Tee with Door
8
1088
136.04
- do - 110 mm dia - Vent Cowl.
8
163
20.41
Supply of 40mm PPR Ball Valve conforming to DIN Standards 8077/8092
-
-
-
- do - 40 mm dia
6
3149
524.88
- do - 32 mm dia
6
1544
257.34
Supplying and fixing in position N.P. soap dish heavy type with N.P. screws necessary wooden plugs, screws etc., including making the holes in walls and making good the same in C.M(1:3) including cost and conveyance of all materials etc., complete.
12
3142
261.87
Supplying and fixing CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make (Seiko / Senoir )
14
9633
688.13
Supply & fixing of SYMET 2 in 1 Faucet (1 mts. Tube) with hook (as per Prayag make CAT.NO:187) as directed during execution.
8
3373
421.72
Supply and fixing 12.70mm dia Angle stop cock 1st quality indian make heavy duty seiko/senior or equivalent
6
3081
513.54
Providing and placing on Terrace ( at all floor levels) Poly ethylene water storage tank with double layer approved brand and Manufacture with cover and suitable locking arrangements & making necessary holes for in-lets and out-lets and over flow pipes but with out fitting and base support for tanks
2000
19280
9.64
Supply and fixing of 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)UPVC/SWR Pipe fittings
20
2040
102.03
Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)
-
-
-
- do - 41.30 mm OD Pipe - SDR 11
40
14910
372.76
- do - 34.90 mm OD Pipe - SDR 11
65
17684
272.07
- do - 28.60mm OD Pipe - SDR 11
40
6855
171.38
- do - 22.20mm OD Pipe - SDR 11
30
3503
116.77
Providing Unplasticized PVC SWR Rain water downfall pipes for the 110 mm dia PVC pipewith wooden block of size 150mmx50mmx50mm with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.
100
29201
292.01
Painting two coats to new walls with Acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade over a primary coat with cement primer of Exterior grade (total three coats) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911. - do - for External walls - New.
757
191801
253.37
Painting Two coats for new work over primary coat (Total three coats) with acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter.- (interior) of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls. - do - Two coats for Internal walls - new.
1345
248703
184.91
Flooring with chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300 mm and thickness 25 mm of any shades as approved by Engineer - In - Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item of work.
90
93222
1035.8
Painting two coats for New wood work with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour over a primary coat with wood primer ( Total Three Coats) and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.
115
22750
197.83
Supplying and fixing of BITW coat hanger of size 0.60 x 0.076 x 0.025 m including finishing smooth the teak wood reapers and polishing with two coats of French Polish over Bee waxing of approved quality and fixing the coat hooks of different sizes of required numbers at equal spacing as directed during execution and fixing the coat hangers to the walls including cost and conveyance of all materials like screws, nails etc,including cost of 4 Nos of NP coat hooks).
8
1478
184.78
Supply and fixing of 1.20 to 2.00 mm thick PVC sheet for toilet doors including Screws, nailsetc., complete as directed during execution.
15
3093
206.32
Supply and Transportation of 2HP Three phase ISI self priming Mono block IP44 motor pumpset (40x40mm). Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi.
1
19478
19478.37
Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz.. enclosed with no volt coil and overload protection with necessary materials, etc., complete suitable for Makes: Siemens / Crompton / L&T (MK2 DOL). Up to 3.00HP.
1
2331
2331.92
Supply, dressing and laying of cut stone flooring with hard granite stone slabs from kotappa konda quarry with following dressing including cost and conveyance etc., complete with the following specifications & DRESSING. a) The size of the stone slab should not be less than 0.61mx 0.45m(2'-0"x1'-6"). b) The thickness of the stone slabs should not be less than 100mm ( 4") in all sides. c) The top of the slab should be dressed with the following dressings properly.
d) All the sides of the slabs should be dressed with following dressing to a depth of 40mm (11/2") from top surface to suit proper alignment and jointing with side slabs.
e) The slabs should be laid horizontally and jointed properly to alignment over sand bed (excluding cost of sand bed).cement mortar bed.
f) The joint of the slab should not be more than 6mm (1/4" thick).
21
101543
4835.38
g) The slabs should be jointed with C.M(1:3) and the mortar should not come over the slab for the above item the rate is including cost and conveyance of all materials to site of work including necessary labour charges, dressing, laying, jointing but excluding cost of sand for bedmortar the bed will be paid under relevent item .( Cement mortar of 0.005 Cum/ Sqm should be used for joints.)
Three Line Dressing:
-
-
-
ELECTRICAL ITEMS
-
-
-
Supply and Fixing of ISI mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in new / existing brick building, walls, columns, beams duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished concealed and masonry work for light, fan and separate plug point including all labour charges etc., complete.
600
55722
92.87
Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal
-
-
-
Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp 1 Way Module Moduler switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings.
120
62540
521.17
Grade-B : Wire Makes: Atlas / Gold medal / Delton / Standard / GM / RPG / V-Guard / HPL / Anchor / Orbit Grade-B: Moduler Switch Makes: Legrand Myrius /Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / GM (GNINE) / Kolars / Indo asian
-
-
-
Supply and wiring with 2 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings.
50
22642
452.85
Grade-B: Makes: Atlas / Gold medal / Delton / Standard / GM / RPG / V-Guard / HPL / Anchor / Orbit
Grade-B: Modular Switch Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / GM (GNINE) / Kolars / Indo Asian
-
-
-
Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete.
650
62400
96
Grade-B : Makes: Atlas / Gold medal / Delton / Standard /GM / RPG / V-Guard / HPL / Anchor / Orbit
-
-
-
Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete.
350
51446
146.99
Grade-B : Makes: Atlas / Gold medal / Delton / Standard /GM / RPG / V-Guard / HPL / Anchor / Orbit
-
-
-
Supply and run of 3 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete.
160
33313
208.21
Grade-B : Makes: Atlas / Gold medal / Delton / Standard /GM / RPG / V-Guard / HPL / Anchor / Orbit
-
-
-
Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.
70
5739
81.99
Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.
70
8119
115.99
Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.
50
5233
104.66
Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 20 Amps 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.
32
5162
161.34
Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 100 W Fan Step Type Regulator Tiny of Modular on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.
24
9200
383.34
Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 1 or 2 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal and with cover plate & Frame and concealed in wall with all required accessories including masonry work and all labour charges etc., complete.
32
7312
228.53
Make for Metal boxes : Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
Grade-B Makes for cover plate & frame : Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolar / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 4 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal and with cover plate & Frame and concealed in wall with all required accessories including masonry work and all labour charges etc., complete.
16
4889
305.62
Make for Metal boxes : Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
Grade-B Makes for cover plate & frame : Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolar / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 6 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal and cover plate & frame and concealed in wall with all required accessories including masonry work and all labour charges etc., complete.
24
9103
379.3
Make for Metal boxes : Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
Grade-B Makes for cover plate & frame : Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolar / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 8 or 9 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal and cover plate & frame and concealed in wall with all required accessories including masonry work and all labour charges etc., complete.
16
7248
453
Make for Metal boxes : Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
Grade-B Makes for cover plate & frame : Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolar / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal and cover plate & frame and concealed in wall with all required accessories including masonry work and all labour charges etc., complete.
32
16672
521.01
Make for Metal boxes : Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.
Grade-B Makes for cover plate & frame : Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolar / Indo Asian / GM (GNINE)
-
-
-
Supply and fixing of 12 Way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly concealed in the wall with neat plastering etc., complete.
8
15940
1992.53
Grade-B: Make: ABB / Standard / Havells-euro II / C&S / L&T / GM / Gold Medal / Indo Asian
-
-
-
Supply and fixing of 6 to 32 Amps SP MCBs 10KA breaking capacity 'C'/ 'D' Curve ISI mark as per IS:60898-1 : 2002 in the existing board and giving necessary connections.
80
19652
245.66
Grade-B Makes: ABB / Standard / Havells-euro II / C&S / L&T / GM / Gold Medal / Hager / Indo Asian
-
-
-
Supply and fixing of universal mounting metal plug board and socket suitable for D.P. RCCBs including labour charges for surface mounting.
8
16201
2025.13
Grade-A: Make: Legrand - ekinox3 / Schneider-Acti9 / Hager - Novello+ / Siemens / Havells STADx / L&T - Newrag / Indo Asian (Opti Pro)
-
-
-
Supply and fixing of RCCB upto 40A Double Pole, 30mA for earth leakage protection, confirms to IEC:61008 and IS: 12640-I in the existing board including internal connections and Labour charges etc., complete.
8
20919
2614.99
Grade-B: Make: ABB / Standard / Havells-euro11 / C&S / L&T / GM / Gold Medal / Hager / Indo Asian
-
-
-
Laying of U.G cables upto 50 Sq,mm and back filling of trench including labour charges etc., complete.
180
4798
26.66
Supply of 50 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked .
Make: Jindal / Appollo / TATA.
12
4803
400.29
Providing of Independent Earthing with 40mm Dia GI Pipe 'B' class of 2.5 Mtrs length after excavating an earth pit of size1.5 m X 0.9 m X 2.55 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.65 m) with the following specification:-
2
9236
4618.1
(a) the GI pipe shall be inserted into the Ground for 2.25 M below the inspection chamber bottom 300 mm all around This pipe shall be covered with the mixture of 40 Kgs of coke, 20 Kgs of salt & sand including necessary earth work excavation in all kind of soils.
-
-
-
(b) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water.
-
-
-
(c) The top 0.25 m of GI pipe shall be exposed into inspection chamber of Hum pipe . The all around inspection chamber shall be provided with 18" dia hume pipe. Earth connections shall be given to the 25 X 6 mm GI flat with bolts, nuts & washers,
-
-
-
(d) A 65 mm dia PVC conduit is to be embedded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound.
-
-
-
(e) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.
-
-
-
Supply and run of ' 8 ' SWG copper Wire for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8"x2" Brass Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.
30
4198
139.96
Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete .
60
14236
237.27
Supply and transportation of 50 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1.
180
66319
368.44
Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.
-
-
-
Supply and fixing of fan hook made out of 3/8" (10mm) M.S.Plain rod and providing to the existing M.S. Rod at the time of concreting the roof slab.
30
2785
92.85
Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.
24
3702
154.29
Supply and fixing of 5/8" Angle / Batten Holder on the existing junction boxes/ T.W Board etc. and giving necessary connections.
50
3502
70.04
Makes: Anchor / Gold medal (Olive) / GM ( G Home) / Havells ( Reo)
-
-
-
Supply & fixing of 1 1/4" dia 'B' class GI pipe not exceeding 1.0 Mtr long with necessary bending (120° to 135°) to the wall or to the pole as directed during execution, etc, complete
8
4333
541.66
Fixing of MV/SV/MH lumainare/Halogen fitting / LED street light fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.
8
1435
179.4
Supply and fixing of 20 Amps 2 Pin & Earth Socket Metal Plug Board with 1 No. 20 Amps SP MCB 10KA 'C' series ISI mark including the cost of MCB Concealed in the wall with neat plastering and giving necessary connections.
12
15964
1330.34
Grade-B: Make: ABB / Standard / Havells-euro II / C&S / L&T / GM / Gold Medal / Indo Asian
-
-
-
Supply and fixing of 1No of 100Amp ,415V, Porcelain rewirable fuse unit of approved make on the existing board and including giving connections etc., complete.
3
1912
637.59
Make: C&S / Standard/ HPL / Sputnik / Million / Gold Medal /Anchor/ Bosma
-
-
-
Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W , air delivery 210/220 cubic meter/min with remote and without Regulator.
Makes : Atomberg(Gorilla GV2 )/ Halonix(Plasma) /Havells(Efficiencia)
24
81486
3395.28
Supply and Fixing of 4 feet T5, 18W LED Batten type fitting with Internal driver with Polycarbonate housing & PC diffuser suitable to operate on 230V AC, 50 Hz power supply as per the following specification.
50
12050
241
Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus.
-
-
-
Specifications:
-
-
-
1. Input Power: 18W ±5%
-
-
-
2. Input Voltage and Frequency: 230V ±5% AC, 50Hz.
-
-
-
3. Power factor : 0.95
-
-
-
4. THD % : 15%
-
-
-
5. Operating Voltage : 140 - 270 VAC
-
-
-
6. Surge Protection : ≥ 2.5 kV
-
-
-
7. LED make: Nichia (Japan) / Osram (German) / Philips Lumiled / Cree (USA) / Bridgelux (USA) / Seoul / Lednim / Everlight / Epistar / Edison.
-
-
-
8. Luminous Flux (Lumen) : 1800± 5%
-
-
-
9. Luminous Efficiency (LM/W) : 100 ±5%
-
-
-
10. Colour Temperature (K): 5500K to 6500K
-
-
-
11. CRI : ≥ 80
-
-
-
12. LED Beam Angle : 150º
-
-
-
13. IP Grade: IP20
-
-
-
Warranty : 5 Years.
-
-
-
Standards Applicable: IS: 10322 Part-5, Sec-3.
-
-
-
Supply of 72/75W LED Day light integral IP 66 street light / Road light fitting with pressure diecast aluminium body suitable for mounting to the existing poles with 50mm to 60mm outer dia bracket (adjustable stem pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with Lense for distribution of lighting and suitable to operate on 230V, 50 Hz AC supply as per the following specification.
8
25840
3230
Make: Philips / Osram / Havells / Crompton greaves / GE / Orkus
-
-
-
1. Output Luminious : 7500 Lumens +/- 5%
-
-
-
2. IP grade : IP 66
-
-
-
3. Material for glass : toughned glass
-
-
-
4. Meterial for LED engine: metal core PCB
-
-
-
5. Working temperature: 0 C to 50 C
-
-
-
6. Working humidity : 10% to 90% relative humidity
-
-
-
7. Working life: 50000 hours
-
-
-
8. LED make: NICHIA (Japan) / OSRAM (German) / PHILIPS LIMITED / CREE(USA) / BRIDGELUX (USA) / SEOL / LEDNIM / EVERLIGHT / LED / EPISTAR / EDISON
-
-
-
9. LED operating current: 700mA
-
-
-
10. LED efficiency: 135 lm/w
-
-
-
11. Luminaire effiency: 100 Lumens/W +/-5%
-
-
-
12. Total system wattage:75W +/-5%
-
-
-
13. CCT: 5500K-6500K
-
-
-
14. CRI : 70
-
-
-
15. Input voltage and frequency :230-240V AC, 50 Hz +/- 3 Hz
-
-
-
16. Operating voltage: 140V-270V AC universal Electronic Driver
-
-
-
17. Input current : ≥300 mA
-
-
-
18. Power factor: 0.95
-
-
-
19. Driver efficiency: 90%
-
-
-
20. THD : 10%
-
-
-
21. LED drive current: 700mA
-
-
-
22. IEC/IS Applicable for Luminaire: IEC60529 / IS 10322 (Part 5 / Sec 2)
-
-
-
Waranty : 5 Years
-
-
-
Design, fabrication, supply, installation and commissioning of indoor type Energy Meter Panel board made with 14 SWG CRCA sheet of size 1400mm (W)x 1200mm (H) x 250mm(D). The inside panel should fabricate compartment wise chambers for incomer, Energy Meters and out-goings. The given Single phase energy meters of 8 Nos should be fixed on suitable hylum sheet and each energy meter chamber should provide with suitable glass for recording the meter reading. Necessary wiring with 2 run of 84/0.3mm PVC copper wire from Bus bar chamber to each energy meter and Energy meter to DP MCBs chamber with neat clipping.
1
94608
94608.76
The box base shall be mounted on suitable MS channel with necessary welding and the channel shall be painted with two coats of enamel paint over one coat of red-oxide. The panel doors should provide with suitable rubber beeding to avoid water leakage and provide with door knobs. Provision to be made at bottom & top of the box for outgoing cables, pipes etc. The entire panel should be powder coated with siemens grey colour through 7 tank process. The following should be supply & fix in the panel.
-
-
-
a) Incomer: Supply and fixing of 250A 4 Pole MCCB, Adjustable Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 36/35 KA, with thermal magnetic release panel mounted . Makes: L&T-D-shine / Schneider NS NSX / Legrand-DPX3 / Siemens-3vL / Hager h3 / C&S-Winbreak2 / HPL -Techno- 1 No
-
-
-
b) Outgoing: Supply and fixing of 40 to 63 Amp DP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark. Makes: Legrand DX3 / Schneider-Acti9 / Hager - h3 / Seimens 5SX4 / Havells STADx / L&T- AU / Indoasian - Optipro / HPL (Techno) - 8 Nos.
-
-
-
c) Bus Bar Arrangement : Supply and fixing of 25 x6 mm size Copper flats should fixed in bus-bar chamber with suitable insulator supports and necessary heat shrinkable sleeves to be provide with colour code- 4 Nos
-
-
-
d) Supply and Fixing of 240/220 V, LED (22.5 mm dia ) Pilot lamp with integral circuit, terminal block, including connection etc. as required (R,Y,B) - 1 Set
-
-
-
e) Supply and Fixing of energy analyser (multy function energy meter) with LCD/LED display capable of minimum 20 numbers electrical parameters display with 1A/5A CT input for LV/ HV network, RS 485 communication port etc. complete in all respect - 1 No
-
-
-
f) The panel should be fixed on floor with suitable bolts and nuts as directed during execution.
-
-
-
g) The ratings of switches, feeder name, busbar / cable chamber etc., shall be indicate on panel with stickering letters and necessary control wiring as directed during execution.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements