Telangana State Industrial Infrastructure Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Telangana State Industrial Infrastructure Corporation Limited - TSIIC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date6 Dec 2024
Closing Soon20 Dec 2024
Tender Amount₹ 3,81,41,398
Costs
EMD
₹ 3,82,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_TSIIC_837830_1Tender No
25/CEII/TGIIC/2024-25, Dated 03.12.2024.Tender Authority
Telangana State Industrial Infrastructure Corporation Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work (APSS NO.309&310). Excluding GST
29.96
40
1213.38
... More
Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310) excluding GST & Seigniorage charges
386.61
324
125454.95
... More
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), coarse aggregate, water etc. to site, including sales & other taxes except GST on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402), Excluding seigniorage charges Ground floor
119.36
5200
620760.33
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & seigniorage charges on all materials,, centering using Steel scaffolding pipes, jack prop, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Footings
69.42
11892
825559.3
... More
Plinth beams
24.53
15137
371313.31
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & seigniorage charges on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Columns upto an un supported height of 3.66 m Ground floor
24.79
15713
389548.32
... More
First floor
15.55
16181
251624.66
... More
Second floor
15.55
17063
265342.4
... More
Terrace
3.4
17947
61020.85
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & seigniorage charges on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Lintels: Ground floor
2.1
15732
33037.47
... More
First floor
2.18
16199
35315.54
... More
Second floor
2.21
16908
37368.49
... More
Terrace
0.1
17725
1772.56
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & seigniorage charges on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Retaining Walls of 230mm thick Ground floor
178.02
4182
744484.98
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & Seigniorage charges on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Roof Beams Ground floor
48.38
14069
680677.57
... More
First floor
48.38
14327
693173.16
... More
Second floor
48.38
14934
722553.85
... More
Terrace
3.45
15540
53616.11
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & Seigniorage charges on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Roof slab 150mm thick Ground floor
528.73
1871
989296.13
... More
First floor
609.31
1909
1163666.33
... More
Second floor
515
1988
1023876.65
... More
Terrace
37.95
2067
78471.49
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & Seigniorage charges on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Roof slab 175mm thick upto an un supported height of 3.66 m Ground floor
19
2080
39532.35
... More
First floor
19
2125
40391.53
... More
Second floor
19
2211
42027.43
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and including sales & other taxes except GST & Seigniorage charges on all materials , centering using Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for Sunshades Ground floor
26.64
755
20130.78
... More
First floor
28.8
765
22041.22
... More
Second floor
29.88
802
23964.06
... More
Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), bricks, water etc., to site, including sales & other taxes except GST & Seigniorage charges on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). Ground floor
105.12
8459
889286.82
... More
First floor
127.68
8793
1122727.27
... More
Second floor
80.85
9405
760437.91
... More
Terrace
57.02
10017
571211.53
... More
Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand (by using Manufactured sand in ratio 50:50), bricks, water etc., to site, including sales & other taxes except GST on all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) Ground floor
182.46
933
170350.13
... More
First floor
182.46
967
176442.47
... More
Second floor
133.71
1063
142139.08
... More
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (by using Manufactured sand in ratio 50:50), coarse aggregate, water etc. to site, including sales & other taxes except GST & Seigniorage charges on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for Bed Blocks & Hold Fasts for finished item of work. (APSS No. 402) for Bed blocks Ground floor
0.85
6433
5468.86
... More
First floor
0.91
6551
5962.05
... More
Second floor
0.19
6729
1278.52
... More
Terrace
0.1
6906
690.64
... More
Plain Cement Concrete M 20 Nominal mix using Concrete Mixer, 20mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand) (by using Manufactured sand in ratio 50:50), coarse aggregate, water etc., to site including steel centering, shuttering, machine mixing, lift charges, laying concrete,vibrating, curing, overheads & contrctors profit etc., complete for finished item of work (APSS No. 402 & 403) for steps, excluding GST & Seigniorage charges Ground floor
5.6
8463
47397.34
... More
First floor
1
8722
8722.11
... More
Second floor
1
9039
9039.95
... More
Providing Thermo Mechanically Treated (TMT) (Fe -500/500D/550D from Primary producer TATA, SAIL, VSP, JSW &Shyam Steel etc as per IS 1786-2008, AF Star TMT/MS Life TMT, Radha TMT, SUGNA TMT) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes except GST on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126). Ground floor
32.31
77719
2511116.72
... More
First floor
19.77
79470
1571123.88
... More
Second floor
18.36
81220
1491211.32
... More
Terrace
1.6
82971
132754.02
... More
Ornamental ceiling plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50) , water etc., to site, including sales & other taxes except GST & Seigniorage charges on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in- harge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Ground floor
572.41
608
348105.42
... More
First floor
561.02
656
368365.73
... More
Second floor
567.08
717
406783.5
... More
Terrace
37.95
778
29526.24
... More
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), water etc., to site, including sales & other taxes except GST & Seigniorage charges on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904). Internal walls Ground floor
909.85
591
538294.56
... More
First floor
1003.07
640
642055.08
... More
Second floor
1034.02
694
718457.78
... More
Terrace
121
749
90689.5
... More
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), water etc., to site, including sales & other taxes except GST & Seigniorage charges on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904). External Walls Ground floor
303.23
591
179399.96
... More
First floor
299.61
640
191777.36
... More
Second floor
297.81
694
206924.34
... More
Terrace
107.83
749
80818.59
... More
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50) , water proofing compound, water etc., to site, including sales & other taxes except GST& Seigniorage charges on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). Third floor (Terrace)
515
781
402565.2
... More
Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand (by using Manufactured sand in ratio 50:50) , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707). Ground floor
19.77
1005
19887.63
... More
First floor
24.27
1059
25702.9
... More
Second floor
19.9
1112
22130.99
... More
Providing dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (by using Manufactured sand in ratio 50:50),and water etc., complete overheads & contractors profit complete for finished item of work. Ground floor
105.43
1537
162099.68
... More
First floor
123.49
1590
196421.96
... More
Second floor
83.8
1643
137738.71
... More
Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)., exclduding GST & Seigniorage charges Ground floor
448.61
1176
527865.93
... More
First floor
487.85
1229
599957.93
... More
Second floor
497.75
1282
638548.54
... More
Providing skirting to internal walls to 10 cm height with with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (by using Manufactured sand in ratio 50:50) and water etc.,and overheads & contractors profit complete for finished item of work.(APSS No.701 &707) excluding GTS & Segniorage charges Ground floor
242.35
116
28304.06
... More
First floor
287.22
122
35063.82
... More
Second floor
246.47
127
31405.21
... More
Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (by using Manufactured sand in ratio 50:50) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and all other taxes except GST on all materials & Segniorage charges, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special) Treads 0.30m width : Ground floor
38.2
6885
263008.15
... More
First floor
10.84
6982
75690.41
... More
Second floor
13
7079
92039.87
... More
Risers 0.15m height : Ground floor
11.6
4648
53924.8
... More
First floor
5.42
4714
25552.59
... More
Second floor
6.5
4780
31072.15
... More
Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300mm x 300mm and thickness 25mm of any shade as approved by Engineer - In - Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), water and tiles etc.,and overheads & contractors profit complete for finished item of work, excluding GST & Seigniorage charges Ground floor
28.6
937
26804.49
... More
Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit etc., complete for finished item of work, excluding GST Ground floor
5.95
6181
36781.29
... More
First floor
5.95
6181
36781.29
... More
Second floor
5.95
6181
36781.29
... More
Supply and fixing of doors as per approved drawings with MedSupply and fixing of doors as per approved drawings with Medium teak wood frame of section 100mm x 65 mm with fixed fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 35mm thick double shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 6 Nos butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 2 Nos tower bolts- 10mm (IS:204) of 200 mm long at top, 1 No. tower bolt- 10mm bolt (IS:204) 150mm long at bottom, 2 Nos. 150mm long fancy handles (IS:208) , 2 Nos door stopper and 2 Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (2000mm x 2400mm), excluding GST Ground floor
8.4
5384
45232.4
... More
Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with fixed fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts - 10mm (IS:204) of 200 mm long at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2400mm) excluding GST D1-Door (1500mm x 2400mm) Ground floor
12.6
4552
57365.78
... More
First floor
2.1
4552
9560.96
... More
Second floor
18.9
4552
86048.68
... More
Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1050mm x 2600mm), excluding GST D2-Door (1050mm x 2100mm) Ground floor
4.2
4778
20071.42
... More
Terrace floor
4.41
4778
21074.99
... More
Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900mm x 2600mm). excluding GST D4-Door (900mm x 2100mm) Ground floor
3.78
4801
18150.5
... More
First floor
3.78
4801
18150.5
... More
Second floor
3.78
4801
18150.5
... More
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast excluding GST D5-Doors (0.75 x 2.10) Ground floor
19.8
882
17479.44
... More
First floor
24.75
882
21849.3
... More
Second floor
24.75
882
21849.3
... More
Supplying and fixing of 30mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, the door shutter shall be waterresistant, fire resistant and termite resistant, with Tensile Strength not less than 170 Kgf/cm2 and the door shutters surface finished deco paint etc., complete excluding cost of hinges, latches, aldrops etc., excluding GST D5-Doors (0.75 x 2.10) Ground floor
6.3
2429
15303.33
... More
First floor
7.88
2429
19141.31
... More
Second floor
7.88
2429
19141.31
... More
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (94mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fiber mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site including overheads and contractors profit etc., complete for finished item of work, excluding GST Ground floor
44.28
8088
358147.71
... More
First floor
47.88
8088
387265.41
... More
Second floor
49.68
8088
401824.26
... More
Supply and fixing of pre-painted steel top hung ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work including overheads & contractors profit etc., complete for finished item of work. Top Hung 2 '-0 x 2'-0 (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm and (ii) Ventilators: Top Hung 4 '-0 x 2'-0 (1219.2x609.6mm) outer frame section size of 46 x 52 m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm and (iii) Ventilators: Top Hung 4 '-0 x 3'-0 (1219.2x914.4mm) outer frame section size of 46 x 52m m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70mm exclding GST Top hung Ventilators Ground floor
0.72
9393
6763.46
... More
First floor
0.72
9393
6763.46
... More
Second floor
0.54
9393
5072.6
... More
Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in all floors excluding GST for Internal walls. Ground floor
909.85
259
236060.58
... More
First floor
1003.07
259
260246.51
... More
Second floor
1034.02
259
268276.49
... More
Terrace floor
121
259
31393.45
... More
Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, sales & other taxes except GST, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. Ground floor
909.85
209
190295.13
... More
First floor
1003.07
209
209792.09
... More
Second floor
1034.02
209
216265.28
... More
Terrace floor
121
209
25307.15
... More
Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter for exterior walls including cost and conveyance of all materials to site, sales & other taxes except GST, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. Ground floor
303.23
304
92348.7
... More
First floor
299.61
304
91246.23
... More
Second floor
297.81
304
90698.04
... More
Terrace floor
107.83
304
32839.63
... More
White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., and overheads & contractors profit complete for finished item of work in all floors, excluding GST Ground floor
572.41
51
29736.7
... More
First floor
561.02
51
29144.99
... More
Second floor
567.08
51
29459.81
... More
Terrace floor
37.95
51
1971.5
... More
Painting to new wood work and flush shutters with lappam finish, over a primary coat and painting two coats of synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes except GST on cost of all materials etc., and overheads & contractors profit complete in all floors (APSS No.1200, 1207 & 1211). Ground floor
18.9
231
4374.41
... More
Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308) excluding GST.
125
285
35675
... More
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), coarse aggregate, water etc. to site, including sales & other taxes except GST on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402), Excluding seigniorage charges
25
5200
130018.5
... More
Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand (by using Manufactured sand in ratio 50:50), water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement, excluding GST & seigniorage charges (APSS No. 601 & 615)
44
5008
220383.68
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & seigniorage charges on all materials,, centering using Steel scaffolding pipes, jack prop, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Plinth beams
12
15137
181645.32
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & seigniorage charges on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Columns - upto an un supported height of 3.66 m
8
15713
125711.44
... More
Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), bricks, water etc., to site, including sales & other taxes except GST & Seigniorage charges on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504).
65
7756
504181.6
... More
Providing Thermo Mechanically Treated (TMT) (Fe -500/500D/550D from Primary producer TATA, SAIL, VSP, JSW &Shyam Steel etc as per IS 1786-2008, AF Star TMT/MS Life TMT, Radha TMT, SUGNA TMT) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes except GST on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126).
5.03
77719
390929.03
... More
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), water etc., to site, including sales & other taxes except GST & Seigniorage charges on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904).
930
591
550215.9
... More
Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter for exterior walls including cost and conveyance of all materials to site, sales & other taxes except GST, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
930
304
283231.5
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & seigniorage charges on all materials, centering using Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Steel Plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for Columns
1.95
17947
34997.25
... More
VRCC M25 Design Mix Roof beams
2.8
15540
43514.52
... More
Haunches
0.75
17725
13294.17
... More
Roof Slab
50.25
2296
115408.67
... More
RCC Walls of 175mm thick
43.4
3574
155139.38
... More
Providing Thermo Mechanically Treated (TMT) (Fe -500/500D/550D from Primary producer TATA, SAIL, VSP, JSW &Shyam Steel etc as per IS 1786-2008, AF Star TMT/MS Life TMT, Radha TMT, SUGNA TMT) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes except GST on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126).
3.17
82971
263018.89
... More
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), water etc., to site, including sales & other taxes except GST & Seigniorage charges on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904).
69.95
749
52427.53
... More
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50) , water proofing compound, water etc., to site, including sales & other taxes except GST& Seigniorage charges on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
69.95
781
54678.52
... More
Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308) excluding GST.
63.2
285
18037.28
... More
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (by using Manufactured sand in ratio 50:50), coarse aggregate, water etc. to site, including sales & other taxes except GST on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402), Excluding seigniorage charges
4.45
5200
23143.29
... More
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (by using Manufactured sand in ratio 50:50) coarse aggregate, water etc., to site and sales & other taxes except GST & seigniorage charges on all materials,, centering using Steel scaffolding pipes, jack prop, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Raft Slab
7.3
11892
86813.35
... More
175 mm thick side walls
8.15
3574
29133.32
... More
125mm thick Roof Slab
28
1871
52390.24
... More
Providing Thermo Mechanically Treated (TMT) (Fe -500/500D/550D from Primary producer TATA, SAIL, VSP, JSW &Shyam Steel etc as per IS 1786-2008, AF Star TMT/MS Life TMT, Radha TMT, SUGNA TMT) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes except GST on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126).
1.35
77719
104921.31
... More
Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308) excluding GST.
214
285
61075.6
... More
Collection ,Supply and filling of Sand / Stone dust from approved quarry to work site and stacking at work site to Dept. gauge for premeasurements including cost and convenyance of all material and all labour charges etc. complete as per standard specifications. Clause 305.3.9 MORD & 304 MORTH excluding GST
64.2
3959
254231.36
... More
Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system class SN-8 with non smooth external annular corrugated and smooth internal surface (Double Wall) for non pressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including rubber gasket, transportation to anywhere in Telangana, loading, unloading charges but excluding GST 235mm dia
400
568
227232
... More
Lowering , laying of Class SN 8 Double wall corrogated ( DWC) pipping systemin into ready made trenches , laying true to line and level and perfect linking at joints, encasing the pipe alround with with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished excluding GST
400
261
104524
... More
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar1:3 prop; 12mm (½”) thick both inside and outside, fitted with 500mm (20”) dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
5
9959
49797.5
... More
Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.
27
194
5246.1
... More
Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors, excluding GST
15
6573
98606.85
... More
Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work excluding GST
9
3243
29195.46
... More
Supplying and fixing 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors excluding GST
24
328
7886.4
... More
Supplying and fixing of stainless steel sink of size 508.00mm x 457.2mm x 203.20mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces , overheads & contractors profit complete for finished item of work in all floors excluding GST
1
5768
5768.24
... More
Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors excluding GST
9
640
5767.2
... More
Supplying and fixing Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 7 - 10 years warranty with necessary fittings etc., complete including cost and conveyance of all materials, labour charges, overheads & contractor profit complete for finished item of work in all floors excluding GST
15
4024
60367.5
... More
Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make, 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors excluding GST
9
5069
45627.84
... More
Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for urinals including full rounding the edges, fixing in position, polishing, including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work for all floors excluding GST
6
3038
18232.26
... More
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels excluding GST 15.90mm OD pipe
75
196
14745
... More
22.20mm OD pipe
40
237
9500
... More
28.60mm OD pipe
45
284
12784.5
... More
34.90mm OD pipe
105
386
40561.5
... More
41.30mm OD pipe
60
479
28770
... More
Supplying and fixing Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work excluding GST 15mm Nominal bore
45
795
35790.75
... More
25mm Nominal bore
30
1538
46150.5
... More
32mm Nominal bore
15
2337
35056.5
... More
40mm Nominal bore
9
3151
28365.3
... More
Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels excluding GST (APSS No. 1302 1319 & 1326) 75mmdia
36
242
8746.56
... More
90mm dia
45
310
13984.65
... More
110mmdia
120
346
41540.4
... More
Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
5
9959
49797.5
... More
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
5
5237
26188.5
... More
Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels excluding GST (APSS No. 1302 1319 & 1326) 160mm dia Double socket
150
655
98313
... More
Construction of brick masonry support for GI pipe of size 304.80mm x 228.60mm x 228.60 mm in CM (1:8) prop including plastering and finishing with 12mm thick in CM (1:5) including cost and conveyance of all materials and all labour charges, overheads & contractors profit complete for finished item of work for all floors excluding GST
100
106
10680
... More
Supply and fixing of ISI 25mm dia 2mm thickness FRLS with IS:9537 part 3 rigid PVC surface conduit pipe in ceiling surface/wall with all required accessories such as long bends, junction boxes, T-bends, base saddles (one base saddle at every 500mm) to draw the circuit wiring/point wiring. The scope includes small civil works such as entry of 25mm pvc pipe concealed through walls and finishing the wall to the original condition after laying the pipe includes painting. All other accessories materials should be included in the item rate such as base saddles, junction boxes, L-bows, T-bends, GI screws etc.Makes : Sudhakar / Finolex / VIP.
3500
111
388500
... More
Supply, Wiring, Testing and Commissioning of Point Wiring for Light,Fan and Call Buzzer/Bell Point with 2 runs of 1.5 Sqmm FRLS PVC insulated 1100V grade multistrand copper conductor wires up to first point and 1.5 sq.mm for subsequent points in cases of light points run in and including 25 mm dia,1.5mm thick FRLS PVC conduits on wall / ceiling including all accessories such as junction boxes, conduit long bends elbows and ceiling rose, with metal boxes, modular switch/socket and the box etc covered with wrap around plus front plate along with all necessary fixing accessories like mounting screws etc.The Wiring conforming shall confirm to IS 732:1982. One lights controlled by 1No 6A/10A Switch
192
889
170688
... More
Two lights controlled by 1No 6A/10A Switch
25
1034
25850
... More
Three lights controlled by 1No 6A/10A Switch
20
1179
23580
... More
Four lights controlled by 1No 6A/10A Switch
20
1324
26480
... More
Supply, Erection, Installation & Commissioning of 36W (600mm x 600mm) slim panel LED luminaire Square Housing Made of Aluminum alloy with corrosion resistant powder coat, with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor 0.9, Surge protection 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI 80, and THD is less than 15% with non integrated driver, MS frame and chain etc., complete with 50,000 burning hours with BIS Certification and inclusive of the labour charges for fixing the fitting in false ceiling with all incidental accessories like cutting, arranging necessary Aluminium strip.,hooks.etc with screws,finishing false ceiling neatly to the satisfaction of civil and Electrical Engineer incharge including giving connections and all labour charges etc., complete..Makes: Phillips / Crompton / Havells / Bajaj/Wipro
122
2935
358070
... More
Supply, Erection, Installation & Commissioning of 15W LED Down Light Recessed / Surface mounting round with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc.,complete with 50,000 burning hours with BIS Certification and inclusive of the labour charges for fixing the fitting in false ceiling with all incidental accessories like cutting, arranging necessary Aluminium strip.,hooks.etc with screws,finishing false ceiling neatly to the satisfaction of civil and Electrical Engineer incharge including giving connections and all labour charges etc., complete..Makes: Phillips / Crompton / Havells / Bajaj/Wipro.
6
1713
10278
... More
Supply, Erection, Installation & Commissioning of 10W LED Down Light Recessed / Surface mounting round with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc.,complete with 50,000 burning hours with BIS Certification and inclusive of the labour charges for fixing the fitting in false ceiling with all incidental accessories like cutting, arranging necessary Aluminium strip.,hooks.etc with screws,finishing false ceiling neatly to the satisfaction of civil and Electrical Engineer incharge including giving connections and all labour charges etc., complete..Makes: Phillips / Crompton / Havells / Bajaj/Wipro.
36
1622
58392
... More
Supply, Erection, Installation & Commissioning of 24W LED Down Light Recessed / Surface mounting round with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc.,complete with 50,000 burning hours with BIS Certification and inclusive of the labour charges for fixing the fitting in false ceiling with all incidental accessories like cutting, arranging necessary Aluminium strip.,hooks.etc with screws,finishing false ceiling neatly to the satisfaction of civil and Electrical Engineer incharge including giving connections and all labour charges etc., complete..Makes: Phillips / Crompton / Havells / Bajaj/Wipro.
36
2156
77616
... More
Supply and transportation fixing of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF≥0.9, Surge protection: 2KV,
THD15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 50,000 burning hours with BIS Certification.
LUMINAIRE MAKE: Makes: Phillips / Crompton / Havells / Bajaj/Wipro.
26
838
21788
... More
Supply and transportation fixing of 11W Mirror light with all standard accessories diffuser. Makes : Phillips / Crompton /Bajaj.
6
854
5124
... More
Supply and transportation of 10W LED Bulkhead fitting with milky diffuser heat sink integrated with housing with all accessories etc complete with 5 years warranty. Makes : Phillips / Crompton /Bajaj.
3
1168
3504
... More
Supply, Transportation of energy efficient fan,1200 mm sweep, aluminium body, consuming 28W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation:B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle’ kit, safety rope, copperwinding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers,temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete.Makes : Atomberg (Efficio ) / Havells / Orient
32
4713
150816
... More
Supply, Erection, Testing and Commissioning of 305 mm 900 RPM exhaust fan complete with louver, bird screen & with 3 core flexible wire as required. Makes : Crompton / Bajaj / Orient
6
4234
25404
... More
Supply and fixing of 6A 3/2 pin Modular socket with shutter with 6A 1way Modular switch, 3 Module box with cover frame on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete. Makes : Legrand Myrius / Schnider Opale / Gold Medal Curve / Anchor Roma viola / Panasonic Vision
28
483
13524
... More
Supply and fixing of 6A switch and 6A, 3/2 pin socket with shutter Modular type with 6A switch control and MS boxes with cover plate and GI switch box fixing on separate board including all labour charges etc., complete.
Makes : Legrand Myrius / Schnider Opale / Gold Medal Curve / Anchor Roma viola / Panasonic Vision
105
728
76440
... More
Supply and fixing of single phase 16A 3pin / 6A 3 Pin Modular combi socket with shutter with 16 Amps Modular switch fixed on suitable size Modular box with required cover frame including with connections, cost and conveyance of all material and all labour charges etc., complete Makes : Legrand Myrius / Schnider Opale / Gold Medal Curve / Anchor Roma viola / Panasonic Vision.
20
909
18180
... More
Supply and fixing of single phase 3 x 6A / 16A Pin Modular combi socket with shutter with 16 Amps Modular switch fixed on suitable size Modular box with required cover frame including with connections, cost and conveyance of all material and all labour charges etc., complete for ot Anesthsia unit Makes : Legrand Myrius / Schnider Opale / Gold Medal Curve / Anchor Roma viola / Panasonic Vision.
75
1818
136350
... More
Supply of DP/TP/FP- Metal Enclosure with IP 65 Protection along with 63A MCB 10KA, C Curve ISIMark. Makes Enclosure: Legrand / Schneider / Siemens / L&T /Hager / Crabtree Xpro / ABB / C&S. Makes MCB : Legrand-DX3 / Schneider-Acti9 / Siemens/ L&T Exora / Crabtree. ( HVAC ODU)
5
4798
23990
... More
Supply and fixing of 8 Way VTPN DB with IP 43 Protection as per IS:13032 with 1 No 63A FP MCCB with 8 Nos 40A 4P C/D Curve ISI Marked MCBs including connections and labour charges for Flush Mounting etc., complete. DB Makes : Legrand / Schneider / ..Isolator, MCB Makes :Legrand-DX3 / Schneider-Acti9 (UPS VTPN)
1
50320
50320
... More
Supply and fixing of 8 Way VTPN DB with IP 43 Protection as per IS:13032 with 1 No 125A FP MCCB with 8 Nos 40A 4P C/D Curve ISI Marked MCBs including connections and labour charges for Flush Mounting etc., complete. DB Makes : Legrand / Schneider / ..Isolator, MCB Makes :Legrand-DX3 / Schneider-Acti9 (L+P VTPN)
1
62045
62045
... More
Supply and fixing of 8 Way VTPN DB with IP 43 Protection as per IS:13032 with 1 No 160A FP MCCB with 8 Nos 63A TP C/D Curve ISI Marked MCBs including connections and labour charges for Flush Mounting etc., complete. DB Makes : Legrand / Schneider / ..Isolator, MCB Makes :Legrand-DX3 / Schneider-Acti9 (HVAC VTPN)
1
69708
69708
... More
Supply and fixing of 8 Way TPN DB with metal door suitable for accommodating 4 pole MCB with RCCB (100mA) as incomer with IP 43 Protection as per IS:13032 and suitable for 1 No 63A FP MCB ,24 Nos 6-32A 10KA SP MCB, C Curve ISI Mark including cable end boxes internal connections and labour charges for Flush Mounting etc., complete. Makes : L&T / Schneider / Siemens / Legrand. (Power DB/ UPS DB)
8
31460
251680
... More
Supply and fixing of 8 Way TPN DB with metal door suitable for accommodating 4 pole MCB with RCCB (30mA) as incomer with IP 43 Protection as per IS:13032 and suitable for 1 No 40A FP MCB ,24 Nos 6-32A 10KA SP MCB, C Curve ISI Mark including cable end boxes internal connections and labour charges for Flush Mounting etc., complete. Makes : L&T / Schneider / Siemens / Legrand. (Lighting)
6
29330
175980
... More
Supply and laying of 3 Runs of 2.5 Sq.mm FRLS PVC insulated flexible ISI mark flexibles copper wire of in existing pipe for run of mains including all labour charges etc complete for power points,lighting circuits switch board and UPS point wiring. Makes:Finolex/Polycab / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.
2400
157
376800
... More
Supply and laying of 3 Runs of 4 Sq.mm FRLS PVC insulated flexible ISI mark flexibles copper wire of in existing pipe for run of mains including all labour charges etc complete for 16A & Geyser Sockets. Makes:Finolex/Polycab / RR kabel / Havells / APAR EBXL / KEI / L&T / V-Guard.
300
239
71700
... More
Supply ,Termination and Fixing of Information outlet Telephone outlet (RJ11) modular type jack with including Synergy Face Plate, with level holders Including Metal box all accessories with cost of materials & labour charges complete. Makes : Legrand Myrius / Schnider Opale / Gold Medal Curve / Anchor Roma viola / Panasonic Vision.
43
581
24983
... More
Supply and laying of 2 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc., complete.
1100
33
36300
... More
Supply, Erection, Testing & Commissioning of 20 pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement.
1
3878
3878
... More
Supply installation testing and commisioning of Dual Face Plate 1no of Cat6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant. Makes : Legrand Myrius / Schnider Opale / Gold Medal Curve / Anchor Roma viola / Panasonic Vision.
110
865
95150
... More
Supply,laying ,testing and commisioning of 4-pair, Cat6 Solid to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, UTP Cable , Meets or exceeds ANSI/TIA- 568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete Makes: Systimax /AMP/Schneider.
2100
53
111300
... More
Supply installation testing and commisioning of 48 port manageable switches Makes : CISCO / Net Gear / HP / D link.
2
18123
36246
... More
Supply installation testing and commisioning of 24 port Modular Patch Panels Patch Panel with collapsible shutters on jacks to support latest ammendments of Cat 6 Specifications in Existing Communication Rack along with necessory connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps. Makes: Netgear/Dlink /Legrand/Schnieder.
6
7578
45468
... More
Supply installation testing and commisioning of 4 pair 23AWG Cat6 UTP ,2mtr/7 ft flexible ,double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568B specifications including making connections to information outlets Makes: Systimax /Legrand/Schnieder.
110
222
24420
... More
Supply , Installation, Testing and Comissioning of 15U (44mm) Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles ,lock , Top and Bottom Cable entries,Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers , Levelers with required 16A/5A power supply box for supplying power to hubs, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Blank panels , sliding shelves etc. Make: APW/HCL/Valrack/Netrack.
1
12633
12633
... More
Supply, fabricating, installing the following size perforated GI cable Trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures upto a height of not more than 10mtrs from FFL., using M.S. angle supports and including necessary fixing hardware as required and as per site requirements. (The steel items required for supporting the cable tray shall be separately covered under below "Steel Items" and cable tray details are mentioned in the drawings) 300 x 50 x 2mm with cover
120
1380
165600
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%