Sri Venkateswara University Tender

Removal of teak wood joinery / steel door , window , ventilator etc carefully, stacking the materials usefull for reuse and clearing away all the debris to the low level areas around the building / site with initial lead and lift etc., complete for finished item of work and as directed during execution.

Dismantling of brick mansonry in cement mortor carefully, stacking the materials usefull for reuse and clearing away all the debris to the low level areas around the building / site with initial lead and lift etc., complete for finished item of work and as directed during execution.

Brick masonry 230 mm thick for panel walls in superstructure with CM (1:4) prop. ( cement : sand ) using second class bricks of size 23 X 11 X 7 cm from approved source having crushing strength not less than 35 Kg / Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and all operational, incidental and labour charges such as mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work for external walls . (APSS No. 501 & 504).

Cement concrete (1:3:6) mix using 6mm to 12mm BSS gauge hard machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for levelling course .

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with smooth finishing including cost and conveyance of all materials like cement, sand, water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for internal surfaces of brick walls and contigeous RCC surfaces.

Flooring with Non - Skid ceramic tiles, of size 300mm x 300mm and thickness between 7-8 mm of first quality of any colour and finish, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Dadooing to walls with 1st quality red or white glazed full body ceramic wall tiles manufactured by ISO approved firm of any size set over a base coat of epoxy emulsion grout / synthetic / resin adhesives in width of 3-5mm , fixing full depth , jointing and pointing laid over existing flooring / CC bed /slab, jointing / pointing grout mixed with pigment of maching shade , including cost and conveyance of all materials , labour charges , incidental charges etc., complete for finished item of work confirming to APSS and as directed during execution. In all floors

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame with shutter, frame section of size 45 x 75mm with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2nos for horizontal member and fixing of 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame. With fixtures 4 Nos aluminium hinges of 100mm size, 2 Nos of aluminium tower bolts of 150mm size, 1 no 200 mm size aluminium aldrop, 2 Nos of aluminium handle of 100mm size, 1 No of heavy duty aluminium door stoper etc., complete for finished item of work and as directed during execution.

Providing painting for new teak wood joinery two coats over one coat of wood primer using first class synthetic enamel paint of approved manufacture and desired shade, including cost and conveyance of all materials , brushes, sand papers, labour charges, incidental charges etc., complete for finished item of work confirming to APSS and as directed during execution.

Supply, Laying, Jointing and Testing the PVC/SWR Pipe line 6Kgs/Sqcm of approved quality and make with single socket end including cost and conveyance of required materials GI clamps, necessary jointing materials, labour charges for fixing but excluding cost of specials etc., Complete as directed during execution.

(A) 110 mm Dia

(B) 75 mm Dia

Supply and Fixing of PVC/SWR specials of approved quality and make including necessary jointing materials, cost and conveyance of all materials etc., Complete as directed during execution.

(A) 110 mm Plain bend

(B) 110 mm Door bend

(C) 110 mm Single Tee

(d) 75 mm Plain bend

(e) 75 mm Door bend

(f) 75 mm Single Tee

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007), including all incidental, labour charges involved, complete for finished item of work and as directed during execution.

(A) 41.30mm OD Pipe SDR-11

(B) 34.90mm OD Pipe SDR-11

(C) 28.60mm OD Pipe SDR-11

(D) 22.20mm OD Pipe SDR-11

Supplying and Fixing of Orissa Pan white glazed water Closet of First Quality ISI:2556-part-3-1981 with “P” or “S” trap, hindware/Parry ware/ Neycer make with ISI mark of size 630X450MM, with Brick masonry seat for Orissa pan/ Indian W.C. using 2nd class bricks in cement mortar as per standard practice, including necessary materials,incidental and labour charges involved etc, complete for finished item of work and as directed during execution.

Supplying and Fixing Indian make Flat Back wash hand basin of approved make and first quality conforming to IS:2556-part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore chromium plated pillar tap of first quality Indian make 400grams Seiko/Senior/Nice/ Esso or equivalent make, complete with standard CI brackets including wooden block:660x460mm – Single C.P. Pillar cock.

Supplying and Fixing PVC low level system parry ware slim line with internal components and short bends 10lit capacity single flush, including necessary materials,incidental and labour charges involved etc, complete for finished item of work and as directed during execution.

Supply and Fixing C.P long body bib cock 12.7mm Indian Make of approved manufacture and standard make (heavy type) or equivalent etc., Complete as directed during execution.

Supply and Fixing C.P. short body Bib cock 12.7mm Indian Make of approved manufacture and standard make (heavy type) or equivalent etc., Complete as directed during execution.

Supply and Fixing Angle stop cock 12.7mm (1/2”) Indian Make of approved manufacture and standard make (heavy type) or equivalent etc., Complete as directed during execution.

Supplying and Fixing TV shape mirror with plastic frame size 609.6mmx457.2mm including cost and conveyance of all materials, labour charges for fixing etc., Complete as directed during execution.

Supplying and Fixing 20.00mm dia and 609.6mm long CP towel rod with brackets / towel ring with aluminum screws, including cost and conveyance of all materials, labour charges for fixing etc., Complete as directed during execution.

Supplying and Fixing N.P Soap dish heavy type with NP Screws including cost and conveyance of all materials, labour charges for fixing etc., Complete as directed during execution.

Supply, Transportation and Fixing of 12" (300mm)ISI, 900 RPM Heavy duty exhaust fan / 15" (375mm)ISI, 900 RPM Heavy duty exhaust fan / 18" (450mm)ISI, 900 RPM Heavy duty exhaust fan with metallic blades including making hole in wall and masonary work and all labour charges etc., complete. (Data No. )

Supply and fixing stainless steel ( S.S ) sink of 36" x 18" size 1mm thick of approved variety & brand (Manufacture) with necessary accessories like 32mm nominal size CP fitting with parelell pipe thread ,waster pipe etc., inlcuding cost and conveyance of all necessary materials , labour chaerges etc., complete for finished item of work and as directed by engineer - in - charge during execution.

Dismantling of R. R. mansonry in cement mortor carefully, stacking the materials usefull for reuse and clearing away all the debris to the low level areas around the building / site with initial lead and lift etc., complete for finished item of work and as directed during execution.

Throughly removing the white wash or colour wash wall surfaces by steel wire brushing and /or scraping, sand papering, and preparing the wall surface smooth ;inlcuding necessary repairs to scraches , providing and applying synthetic plaster of putty or cement based putty of average 1-2mm thickness over plasted wall surfaces to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, appliane memory paper , sanding the surface, clean and wipe off loose dust, applying / knifing paste filler by putty knife / muslin pad, Air dry for 2 - 3 hours , sand with 180& 320 No. sand paper for the surface preparation, Painting with 2 coats of plastic emulsion paint of approved brand and shade over one coat of interior grade cement primer ( total 3 coats ) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls.

Supply, Installation and commissioning approved make floormounted Close coupled EWC suit CASCADE model 'P' or'S' trap with dual flush porcelain cistern fixed on EWC withall internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stopcock 450 mm long PVC inter connection pipe wallflanges all of approved make etc. complete for finished item of work inall respects: Coloured - Grade - I/ Grade - II

Providing painting for old teak wood joinery two coats using first class synthetic enamel paint of approved manufacture and desired shade, including cost and conveyance of all materials , brushes, sand papers, labour charges, incidental charges etc., complete for finished item of work confirming to APSS and as directed during execution.

Supply and fixing of teak wood panelled and shutters for Kitchen racks with 100mm x 40mm teak wood alround frame and 2 Nos teak wood verticles supporting with 100mm x 40mm thick, with Double shutters using MDF water proof board of thickness 18.00mm. 2 inches MSZ hold fasts 08 Nos SS but hinzes 75mm length 12 Nos, SS handiles 100mm length 06 Nos, Keyless lockset 03 Nos, magnatic lockset 12 Nos, including incidental charges, nails screws, fevicol, labour charges etc., complete as directed during execution. Size of frame (2.75 x 1.25 meters) = 3.43

French Spirit polishing Two or more coats on new works including a coat of wood filler etc., as directed during execution.

Supplying and Fixing Pedestal for Wash Hand Basin(H.S.W/ Parry / Earthenware)