Sri Venkateswara University Tender

Providing and fixing in true horizontal level 600 mm x 600 mm 15 mm thick Arm strong false ceiling system manufactured by M/s Arm strong world Industries using hot dipped Galvanized Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fiber Board manufactured by M/s Arm Strong World Industries Ltd., having RH 99% and for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work and as directed during execution.

Providing,fabricating, assembling and fixing in position Anodized / Powder coated aluminium door minimum of 60-70 microns, jindal/Hindalco or equivalent make using following aluminium mat finish or glossy finish, outer frame plain section 101.60x44.45mm thickness 3.18mm, section weight 2.404 kg/mtr, door shuttters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505 kg/mtr, top section 47.62x44.45mmm thickness 3.00mm,section weight 1.426 kg/mtr , bottom section 114.30x44.45mm thickness 3.18mm,section weight 2.646 kg/mtr, door central section 49091x44.45mm thickness 3.00mm,section weight 1.495 kg/mtr glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124 kg/mtr; aluminium sections cut to length, joints metred, corners grinded ,the shuttters pivoted opening rangement with heavy duty aluminium alloy automatic door closure floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts,lock,pivots,P.V.C or rubber gasket with 5.00mm thick plain glass for top panel and for bottom panel aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials, the assembled frame fitted with the corner angles,strips and fixed with screws,rawl plugs and teak wood gutties to R.C.C columns or masonry on sides,beams and flooring in bottom including cutting, chisselling and making good with cement mortar to match the surface, all the frames should be thoroughly cleaned free from rust,scale or dirt including cost of materials,fixtures,HOM of machinery, complete as per specification and as directed during execution.

Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads, uPVCextruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powdercoated) touch lock with hook (if required for wire mesh panel), stainlesssteel (SS 304 grade) body with adjustable double nylon rollers (weightbearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded a all orners,including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shallbe filled with weather proof siliconsealent over backer rod of requiredsize and of approved quality, all complete as per approved drawing &direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and siliconsealent . Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriatedimension. (Area of window above 2.50 sqm ).

Providing and Closing of different sizes opening below window Sill level using double shutter sliding door of outer frame section of size 100mm/50mm teakwood alround frame of verticles and horizontals supports with top and bottom of rock with double shutters using MDF water proof board of thickness 18.00mm and 24 Nos of Iron, sliding wheels, 14 Nos of aluminium door handle of size 75mm, teakwood beading alround of shutters including incidental charges, nails, screws, fevicol, labour charges etc., Complete as directed during execution.

Providing and closing of Grills of different sizes above main door by fixing 19mm thick Plywood, 9 Ply - 19mm thick plywood (IS:303) BWR/BWP Grade of approved manufacturer, including cost conveyance of necessary materials like screws, nails, fevicol etc., labour charges involved, hire & operational charges of T&P etc., complete for finished item of work and as directed during execution.

Supplying and fixing of Venetian blinds vertical blinds 100 mm wide with all accessories including cost and conveyance of all materials and labour charges complete as directed by the departmental officer during execution. In all floors

Varnishing to wood work two coats with best varnish off approved quality and make including brushes to have even shade and including cost of linseed oil , boiled , stopting cloth , cost and conveyance of all materials , labour charges , incidental charges etc., complete for finished item of work as per APSS and as directed during exeuction.

Throughly removing the white wash or colour wash wall surfaces by steel wire brushing and /or scraping,sand papering, and preparing the wall surface smooth ;inlcuding necessary repairs to scraches , providing and applying synthetic plaster of putty or cement based putty of average 1-2mm thickness over plasted wall surfaces to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, appliane memory paper , sanding the surface, clean and wipe off loose dust, applying / knifing paste filler by putty knife / muslin pad, Air dry for 2 - 3 hours , sand with 180& 320 No. sand paper for the surface preparation, Painting with 2 coats of plastic emulsion paint of approved brand and shade over one coat of interior grade cement primer ( total 3 coats ) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls.

Providing new pre laminated sheet in place of damaged plywood sheet including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed during execution.