Sri Venkateswara University Tender

Employment Bureau;Providing, fabricating, assembling and fixing in position anodized aluminium partions using sections in combination of plan, single grove and double grove, providing and fixing bottom and top panels fixed with the materials to a height of 0.9m to 2.13m and 5.5mm thick plain glass for middle portion, the glass and panels fitted with glazing clips of 19mmx17.3mm with thickness of 0.9mm, aluminium sections anodised 12 to 15 mictons, sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars of any other sticky materials, vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standrad size (excluding cost of door opening). All the frame should be thoroughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications, requirements for the frames

Employment Bureau;of over all size 101.6mm x 44.45mm 3.18 thick and bottom member 114.3mm x 44.45mm x 3.18mm thick, aluminium louvers of size 77.6mm x 27.6mm x 1.70mm thick, bottom portions provided with 12mm thick prelaminated sheet both sides of approved colour lamination exterior grade aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m.c/c sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tonnoned and rivetted to the frames, The assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C. columns or masonry sides, R.C.C. lintels or beams at top and floor at bottom including cutting chiseling and making good with cement mortar to match the surface etc., complete as directed during execution.

Employment Bureau;Providing, fabricating assembling and fixing in position, anodized aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.60 x 44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shoutters vertical section 44.62 x 44.45mm thickness 3.00mm, section weight 1.426 kg/m bottom section 114.30 x 44.45mm thickness 3.18mm, section weight 2.646kg/m, door central section 49.91/44.45mm,thickness 3.00mm, section weight 1.495 kg/m, glazzing clips 19 x 17.3 x 11mm thickness 0.9mm Section weight 0.124Kg/m, aluminium sections cut to length joint metred corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots. P.V.C. or rubber gasket with 5.5mm thick plain glass for top and bottom panel, aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials, the assembled frame fitted with the corner angles, strips and fixed with screws, rawl plugs and teak wood gutties to R.C.C. columns or masonry sides, beams and flooring in bottom including cutting, chiselling and making good with cement mortar to match the surface all the frames should be thorougly cleaned free from rust, scale or dirt including cost of materials, fixtures lablur and HOM of machinery, complate as per specification.