Sri Venkateswara University Tender

Arts block Electrical Re Wiring,;Supply and fixing of 6A/10A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch, 3 Module box with cover frame on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B./R.B. (Data No. DataNo20-21-.12.1.1)

Arts block Electrical Re Wiring,;Supply and fixing of 3 Nos 6A ISI Mark modular type switch with 3 Nos 6A 3/2 Pin wall plug socket on suitable size modular deep box with cover frame including cost and conveyance of all materials and all labour charges etc., Complete computers in NRB/RB (Data No.20-21-12.1.5)

Arts block Electrical Re Wiring,;Supply and fixing of ISI mark 16A 3pin / 6A 3 Pin 1 way Modular combi socket, 16 Amps Modular switch, 3 Modular box with suitable cover frame and earth connections including cost and conveyance of all material and all labour charges etc., complete inNRB / R.B. (Data No. DataNo20-21-.12.1.4)

Arts block Electrical Re Wiring,;Supply and fixing of ISI battem holder / angle holder on existing block, but without bulb including all connections etc complete (for replacement) (Data No20-21.14.1.2)

Arts block Electrical Re Wiring,;Supply of 2 modular type electronic step type fan regulator Make:LegrandMyrius/ Havells coral or Fabio/ L & T/HPL/Schneider Livia/GM-(G NINE/GX) C &S/ gold medal (Curve/Air)/ Million Mway/Logus platina/Panasonic vision/salzer S90series/precision/concept(samrat/qurat)/polycab(Levana)/Anchor-Roman Indo Asian?Pointer/CPL/Kolors/Vian/Hosper/vimal (ELEC-1.8.2(N)

Arts block Electrical Re Wiring,;Supply and Run of 2 of 36/0.3mm (2.50 Sq.mm) with Run 1 of 22/0.3mm (1.5Sqmm) FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for running of mains including all labor charges etc., complete.(Data No. 20-21.13.1.10)

Arts block Electrical Re Wiring,;Supply and Run of 2 of 56 /0.3mm (4.00 Sq.mm) with Run 1 of 36/0.3mm (2.5Sqmm) FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for running of mains including all labor charges etc., complete.(Data No. 20-21.13.1.11

Arts block Electrical Re Wiring,;Supply and fixing of DB with 1No 20A single phase plug and socket, in sheet steel enclosure with 1 no 10A to 20A 10 KA SP MCB including internal connection and labour charges for surface Mounting etc. complete. ( Data No 20-21-19.1.1)

Arts block Electrical Re Wiring,;Supply and runoff 4of 84/0.3m(6.0sqmm) with Run 1 of 36/0.3mm(2.5sqmm) / Run 1 of 22/0.3mm (1.5sqmm) FRLS/HFFR PVC insulated flexible ISI mark, copper cable in existing pipe for run of mkains including all labour charges etc., complete (Data No20-21-13.1.14)

Arts block Electrical Re Wiring,;Supply and fixing of 8 way TPN DB Horizontal with IP 43 protection as per IS 13032 and suitable for 24 No?s SP outgoing and for 1 No 4 pole in comer with 1 No 100A FP 1 solator and 24 No?s 6-32A 10KA SP MCBs of including internal connections and including all labor charges for surface Mounting etc., complete.(Data No. 20-21-17.1.2)

Arts block Electrical Re Wiring,;Supply of 100A 415V TPN double break switch in SS enclosure without fuses as per IS: 13947 Makes: HPL/ Havells/standarad /Indo Asian/ Benlo (ELec2.5.2)

Arts block Electrical Re Wiring,;Providing independent earthling by excavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for important equipment with 2.5 Mtr length 40mm dia B class G.I pipe and 18?dia 3?thick Hume pipe ring with R.C.C slab cover duly providing staggered holes fitting with 20kg salt and 40kg Charcoal or 40kg betonies powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 X 6mm X200mm length to be bolted with nut bolts including supply and termination of No.8 G.I wire from bottom of the pipe with all accessories and labour charges complete ,as per IS specifications732 /1982 (Part II) (Data No.20-21-25.1.2)

Arts block Electrical Re Wiring,;L.T.Panel: Design, fabrication, supply, installation, and commissioning of indoor distribution panel of size 2450mm(H) X 1400m (H) X 450mm (D). made with 14 CRCA sheet. Steel cleaning coith 7tank process and made of compartment with chamber for change over switch, incoming, outgoing, switch gear Busbar and outgoing cable chamber etc, and the individual chamber door should provide rubber beading and with locking arrangements door Knob etc. Suitable heat Dissipation/ Air /, Ventrilation ducts with inside wiremen shall be providing to the panel. The entire panel base shall be mounted on 100X75mm MS. channel with necessary welding and should be provided two coat of enamel and black paint over one coat of red oxide. The following switch gear etc should be supply and ecomdate firmely inside the panel and giving necessary connection. The contractor should get the approval of panel drawing from the Concern Higher Engineer before starting fabrication of panel. Specifications and approval:- Supply of 400 AM cos on load coilt open execution as per IS.13947. makes GST/HPC/Havelln/ CSI-----No. Supply of 125AMP MCCB 3pole adjustable confirm to TEC.60947-2 & IS 13947 ? part 1 & 2 having breaking capacity 25KA with thermal magnetic nelane .Panel mounted. Make LST/HPC/Havell/CSI ---8No. Supply and erection of L.T.3 Phase digital and voltage multifunction energy meter with DLMS (Devise Language ménage) Specifications feature and Rs.485/232 communicable facility as per I.S.1595 for measuring all the parameter voltage/ Current/ power/

Arts block Electrical Re Wiring,;Frequency/ power factor/ KW/KWH/KVAR/KVARH/ on existing panel board including connection etc complete Make:-conxerve/Elmeanure/Leg/MECO/HPL. ------- 2 Supply and Fixing pilot Lamp 240/220V LED 22.5mm dia, wih integral circuit terminal block including connection etc complete an required R&B ? 1Set Busbar : 4 nos of copper Busbar of size25X12mm or equivalent should run from incoming and outgoing terminals vertically/ horizontallly and vertically in the Busbar chamber, the Busbar should both, nuts and crasber and Busbar should provide heat shrinkable sleeve with colour load or R , Y, B & N Busbar: the outgoing 125AMP MCCB should be connected to the main Busbar of size 25X3mm or equivalent copper Busbar with suitable bolts, nuts, copper firmly and the Busbar should be provide heat shrinkable sleeve with colour load or RYB & N for 8 nos or 125 AMP MCCCB BUSBAR: 1No of 25X3mm size or equivalent copper hat without sleeve shell over horizontally at inside bottom of the panel for earth connection. 2 nos danger Name plates of 440 volt with 3 languages should be fixed to the panel board. The rating of switches, feeder Name Busbar / Cable chamber etc shall be indicate on panel with stickering letter as directed during execution.