Sri Padmavati Mahila Visvavidyalayam Tender

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

Cement Concrete CC(1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Providing High Yield Strength deformed (HYSD)/ Thermo mechanically treated (TMT) steel bars of Fe 500 grade (as per IS 1786 - 1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings,Welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but excluding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.( for footing )

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but excluding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.( for plinth )

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but excluding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing. ( for lintel )

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but excluding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing. ( for column )

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but excluding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing. ( for beam )

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department but excluding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing. ( for slab )

Construction of Brick Masonry 230mm CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement mortar(1:5) 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Plastering in Cement mortar (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete .

Painting to new walls with single coat of primer and 2 coats of Acrylic interior Emulsion paint - (interior) of approved brand and shade over a base coat of primer total 3 coats after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls

Painting to new walls with single coat of primer and 2 coats of Acrylic Exterior Emulsion paint - (external) of approved brand and shade over a base coat of primer total 3 coats after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls

Painting with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls

Flooring with vitrified tiles of 1st quality of following varieties of series and shades set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete - for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)Supply of Double charged (with double layer pigment) / multi charged stain free full body (with full body pigment entire body thickness) porcelain vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020,strength: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc., complete as directed during execution.

Supply and fixing of MS tubular pipe roof trus as per design including cost of purlins, cleats, bolts, nuts, welding charges and labour charges for lifting and keeping the truss in position and all charges for finished item of work as directed by the depoartmental officer during execution.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. '--do-- Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. Aminimum of 4 hinges will be required for fixing the door with the frame

Providing, fabricated, assembling and fixing in position anodized aluminium partitions Jindal/Hindalco or equivalent make using sections in combination of plain, single grove and double grove as per requirements for the frames of over all size 101.6 mm x 44.45mm, 3.18 thick having section weight, plain sections 2.40 kg/m single grove section 2.541kg/m and double grove section 2.683 kg/m and bottom member 114.3mm x 44.45mm x 3.18mm thick and 2.6 46 kg/m, aluminium louvers of size 77.6mm x 27.6mm x 1.70mm thick section weight 0.483kg/m, bottom portions provided with 12 mm, thick prelaminated sheet both side of approved colour lamination exterior grade aluminium sections of matt finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c, sections are cut to the required lengths, joints metered and corners grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chiselling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m from floor level and 5mm thick plain glass for middle portion viz., 0.9m to 2.13m and top panel with lower sections, the glass and panels fitted with glazing clips of 19mm x 17.3mm. With thickness of 0.9mm, weight 0.124 kg/m aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars of any other sticky materials, vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening). All the frame should be thoroughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Flooring with Antiskid floor tiles 1st quality of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)'- do - Supply of Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Finishing the sides of walls with Ist quality glazed wall tiles of following sizes of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply) Supply of glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block.pf soze 660 x 460 mm- single cp piller cock.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series with 7 years warranty. Chrome plated.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'P' trap. ISI Mark or equivalent approved by the department.

Electrical : Supply and Laying of ISI 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe concealed in Roof Slabs with all required PVC / Metallic Deep Boxes including masonary work and labour charges etc., complete.PVC Pipe Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin.

Supply and laying of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 regid PVC pipe consealed in wall with PVC / Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size well seasoned wooden deep box / Metal deep box / Modular deep box including all labour charges etc., complete.Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin

Supply and Fixing of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 regid PVC pipe on surface of wall with PVC / Metallic junction boxes fixing on chromium plated metallic base saddles including all required materials and labour charges etc., complete for run of mains.Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin

Wiring with run of 2 of 14/0.3mm (1.0 Sqmm) / 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B.(Data No. )Copper cable Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GMAccessories Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)

Wiring with run of 3 of 14/0.3mm (1.0 Sqmm) / 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B.Copper cable Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GMAccessories Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)

Run of mains: Supply and Run of 2 of 36/0.3mm (2.50 Sq.mm) FRLS with 1 run of 22/0.3mm (1.50 sqmm) FRLS PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete.Copper cable Copper cable Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM

Supply and Run of 2 of 56/0.3mm (4.00 Sq.mm) with Run 1 of 36/0.3mm (2.5Sqmm) FRLS PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., completeCopper cable Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM

Supply and Run of 4 of 56/0.3mm (4.0 Sq.mm) with Run 1 of 36/0.3mm(2.5 Sqmm) FRLS /HFFR/ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete Copper cable Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM

Supply and Run of 5 of 84/0.3mm (6.0 Sq.mm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete

Supply and fixing of 6A/10A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch, 3 Module box with cover frame on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B.Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)

Supply and fixing of ISI mark 16A 3pin / 6A 3 Pin 1 way Modular combi socket, 16 Amps Modular switch, 3 Modular box with suitable cover frame and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B.Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA

Supply and fixing of 4 Nos 6A ISI mark Modular type switches with 6A 3/2 pin wall plug sockets on suitable cover frame to be fixed on Modular box including cost and coveyance of all material and all labour charges etc., complete for Computers in N.R.B.capper cable Makes:Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)

Supply and fixing of 20W,2000 lumens T8, , not less than 1100 mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete. as per IS 10322 (Part 5/ Sec 1)..2012 Makes : a) LUMINAIRE MAKE : Phillips / GEVenture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG

Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator including all standard accessories and all labour charges etc., complete 5 star Rated Fan Makes:Crompton HS Plus / Havells ES PLUS/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium)

Supply and fixing of Modular type Stepped electronic regulator for sweep AC ceiling fans of 900mm / 1200mm / 1400mm.Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)

Supply and fixing of fan hook in RCC slab of 12/15mm dia MS Rod while laying the slab.

Supply, Transportation and Fixing of light duty 12" (300mm) Light duty exhaust fan with metalic blades and wire guard including making hole in wall and masonary work and all labour charges etc., complete.

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia 'B' Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder and providing 18" dia 18" height 3" thick hume pipe ring covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Supply and laying of following sizes 8 SWG Copper wire(0.1155Kgs/1Mtr) Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as require

Supply and transportation of 45W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's having System efficacy 100 lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete. a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) / Halonix(Lumos - Super) / Havells (Endura Series) /Capart(Premium)/Greenlites(Hi-Lux) /Polycab/Keselec/ HPL(City Vision)/ Jaquar(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Supply of 2 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/ Goldmedal/GM

Supply, transportation and fixing of 36W Recessed / Surface mounting 2' x 2' (600x600 mm) LED luminaire made of CRCA sheet housing with powder coated with acrylic diffuser, Constant current Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , With System lumen output ≥ 3200lm operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV, THD10%, with high power LED's having efficacy of 100 lumens / watt, CCT: 3000K - 5700K, minimum CRI70, .etc.,, complete. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight

Supply and fixing of FP Enclosure with IP 20 Protection with 1 No 40-63A FP MCB including internal connection and labour charges for Surface Mounting etc., complete

Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA SP MCB including internal connection and labour charges for Surface Mounting etc., completeMakes:Legrand(Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro/ HPL (Techno).

Fabrication, Transportation and supply of of 1.5mtrs sword type or any decorative double arm bracket with dooms either sides complete with all accessories with MS galvanized 40mm / 50mm dia Pipe. Makes: Bajaj / Valmont/Laasma//Transrail/Utkarsh/ Skipper/Consoul

Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables from 70 Sqmm up to 400 sqmm covering the cable with bricks and back filling of Trench duly providing route indicator at every 8 Mtrs distance embedded in C.C including cost and conveyance of materials and labour charges etc., complete

Supply and fixing of 12 Module Flush mounted Vertical / Horizontal Modular box with cover frame for fixing Modular switches including all connected accessories etc. complete in N.R.B.Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA )

Supply and fixing of 6A / 10A 1 Way 1 Module Modular Switch. Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA) N.R.B.

Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter. Makes: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA )