South Central Railway Tender

Laying of cables of sizes 6

Supply and Erection of LT/HT cable markers for indicating cable route. 7

Supply only of GI wire for UG cables of sizes. 9

Supply of switches in the MDB's/Metering units 10

Supply of switches in the DBs 12

Supply of items(Junction boxes/contactors) 13

Supply and running of mains: Run of mains consists of supply of flexible cables of 2 14 Nos. of 4 sq.mm and 1 No of 2.5 sq.mm multi stranded bright annealed copper conductor of FRLSH category, Type-D insulation, including running of wires through conduit(cost of supply and erection of conduit will be paid separately)

Supply and running of mains: Run of mains consists of supply of flexible cables of 2 15 Nos. of 2.5 sq.mm and 1 No of 1.5 sq.mm multi stranded bright annealed copper conductors with FRLSH category, Type-D insulation including of running of wires through conduit(cost of supply and erection of conduit will be paid separately)

Supply and running of mains: Run of mains consists of flexible cables of 2 Nos. of 6 16 sq.mm and 1 No of 4 sq.mm multi stranded bright annealed copper conductor with FRLSH category, Type-D insulation, running of wires through conduit (cost of supply and erection of conduit will be paid separately)

Supply and fixing of wiring point (upto 10 meters length) consists of set of flexible 17 cables of 3 Nos. of 1.5 sq.mm multi stranded bright annealed copper conductor of FRLSH category, Type-D insulation, running of wires through conduit(cost of supply and erection of conduit will be paid separately). 18

Supply and fixing of Modular switchboard: Metal Flush/surface boxes and white cover plates including assembling. 20

Supply and fixing of Modular switches/sockets/calling bell/ dummy switches 21

Supply of light fittings 22

Supply of BLDC ceiling fans of 1200 mm sweep with remote control, and speed 23 control with toggling with ON/OFF switch, and LED Speed Indicators, without Regulator, and with 5years warranty Note: (1)Ceiling Fan supplied to railways must match minimum service value greater than or equal to7.85 m3/minute/Watt, with the BEE 5 Star Rating valid as on the date of supply . 24

Fixing of Ceiling fans 25

Supply and fixing of 26

Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable 27 tray (Galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable 28 tray "bends" (galvanization not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

Provision for supply, erection and commissioning of 5 mtr long dip galvanised octagonal pole with 130 mm bottom A/F & 70 mm top A/F made up of 3 mm thick HT sheet along with base plate of size 200x200x12mm, M16x750 long 'J' type EN 8 grade foundation bolts, 1000 mm long single/double arm bracket (as per site requirement) with concrete foundation and plinth in hard soil including excavation of soil, tamping of concrete grouting, Supply and provision of Bakelite sheet and 1-5A MCB (for mounting inside the base compartment of Pole) with all accessories.

Design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be 30 less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided

Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 31 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided

Design, supply, fixing, testing and commissioning of ON delay timer circuit arrangements for 2 platform lightings ON/OFF operation in 1.6 mm thick CRCA sheet enclosure of 16"x12"x8" size with door and lock & key arrangement comprises following switchgears including 32 stickering and all other connected accessories complete. a) 2 Nos. of micon 225 Timer Make: M/s. L&T/Legrand/Havells b) 2 sets of 3 pole contactor 45A AC1 (25A AC3) Make: M/s. L&T/Legrand/Havells c) 2 sets of ON push button with elements Make: M/s. L&T/Legrand/ Havells d) 2 sets of LED indication lamps Make: M/s. L&T/Legrand/Havells e) 8 way/2 sets of 4 way terminal connector & internal wiring arrangements.