South Central Railway Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
South Central Railway - SCR Tender
Telecommunication Services
Ireps
Opening Date24 May 2024
Closing Date18 Jun 2024
Tender Amount₹ 6,96,54,584.07
Costs
EMD
₹ 4,98,300Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Alteration In Macls Indoor And Outdoor To Existing Distributed Electronic Inter Locking (hot Standby) At Rayanapadu In View Of Proposed Bye-pass Line Rail Over
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
B-SG-CN-SNT-GNT-2-2024-25-DYCSTE-C-BZA-S AND T/SOUTH CENTRAL RLYTender No
B-SG-CN-SNT-GNT-2-2024-25Tender Authority
South Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of Offset bracket to suit 140mm dia. CLS post with two numbers of 'U' bolts and nuts complete as per SA-23080 Inspection: RITES
5
3377
16885
... More
Supply of Calling On signal unit complete and 'U' bolts to drawing no.SA.24351 /Adv. Inspection: RITES
5
3242
16210
... More
Supply of position light shunt signal ground type complete with base , Pipe, hoods to Drg.No.SA.23840/Adv./Alt.1 - S.23202 (Adv.) Specn. IRS: S.6/81. Inspection: RITES
20
4160
83200
... More
Supply of position light shunt signal post type with hoods, number plates,lamp holders, wire mesh, terminal block and offset bracket to suit 90 mm sockets (CLS) with 2 nos. of U bolts and nuts complete to fix calling on signal/shunt signal below main stop signal as per to Drg no. S23840 Inspection: RITES
3
2416
7248
... More
115 Supply of Colour light signal unit:
-
-
208617
... More
Supply of GKP type Location Boxes Half size drg. No. S&T/MFT/2378 (Half). Inspection: RITES
20
5529
110580
... More
Supply of relay fixing frame for Full location box, the frame should be made out MS angle of 25mm X 25mm X 3mm and approximate size of 940mm X 150mm with suitable holes to fix the same in the box. Inspection: Consignee
75
591
44325
... More
Supply of hylam sheet, resin bonded, 6mm thick, grade P3, to IS specification IS: 2036 of 1974 or latest and size 2400mm X 1200mm of colour approved by the site in-charge Inspection: Consignee
20
4821
96420
... More
Supply of hylam sheet, resin bonded, 6mm thick ,grade P3, to IS specification IS: 2036 of 1974 or latest and size 2400mm X 600mm of colour approved by the site in-charge. Inspection: Consignee
10
2356
23560
... More
Supply of Track lead junction boxes fiber glass as per Drg.No.CWM-00597of F.R.P material to 14 IRS.S.23 specification along with fixtures i.e., on MS angle 50x50x5mm, 0.9 Meters long two numbers of G.I. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm PBT terminal). Inspection: RITES
70
1057
73990
... More
Supply of track feed regulating resistance disk type 0 to 30 ohmss as per Drg.No.SA.20161/06/M or latest. To be procured from RDSO approved firms Inspection: RDSO
70
243
17010
... More
407 Stationary low maintenance secondary lead acid cells as per RDSO specification IRS-S- 88/2004 with topping up frequency upto 6 months. This includes supply of inter cell connectors, bolts nuts, acid level indicating floats and vent plugs.
-
-
374700
... More
Supply of Hydro meter. Inspection: Consignee
10
191
1910
... More
Supply of distilled water for topping of secondary cells. (to be supplied at site.) IS 1106 Inspection: Consignee
2000
7
14000
... More
Supply of AC immune, plug-in-type, Style 'QTA2' DC Neutral track, 9 ohm, 2F/1B contacts, front 19 and back contacts metal to carbon, complete with plug-board, retaining clip and connectors conforming to BRS: 939A, BRS: 966 (Appendix F2), IRS:S 34 & IRS:S 23 (as applicable). The interlocking code for this unit shall be FGHKX.(with ATC clips) Inspection: RDSO
50
3271
163550
... More
Supply of Relay, plug-in type, Style 'AC-LED' All aspects, AC lamp proving relay unit with in-built 20 current transformer type, slow release neutral line relay, 4F.4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110V AC, LED signal lamp Rate (in Rupees)d at 15W confirming to RDSO spec. STS/E/Relays/AC lit LED signal/09-2002, BRS 941A,IRS:s34 & IRS:S23 (as applicable).The interlocking code for this unit shall be ABDHK(with ATC clips). Inspection: RDSO
300
4831
1449300
... More
Supply of Relay AC immunized, plug in type, style QNA1K, DC neutral line, 24V 1000 ohms, 6F.6B 21 contacts, front contacts metal to carbon and back contacts metal to metal / carbon, complete with plug board, retaining clip and connectors conforming to BRS 931 A, IRS S - 60 , IRS S - 34 , IRS S 23 and RDSO specification STS/E/Relays/UEA (PI), dated 30-6-97 (Annexure - II) (as applicable). The interlocking code for this unit shall be CDEKY.(with ATC clips) Inspection: RDSO
150
3178
476700
... More
Supply of Relay Non-AC immune, plug-in-type Style 'QN1, DC neutral line, 24V, 8F.8B contacts, 22 front and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS 930, IRS- S34, IRS-S23 (as applicable). The interlocking code for this unit shall be ABCDF.(with ATC clips) Inspection: RDSO
200
2992
598400
... More
Supply of Relay AC immune, plug-in-type Style 'QNA1, DC neutral line, 24V, 8F/8B contacts, front 23 and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS 931A, IRS- S60, IRS-S34 and IRS-S23 (as applicable). The interlocking code for this unit shall be ABDGH.(with ATC clips) Inspection: RDSO
200
3173
634600
... More
Supply of Relay, Non-AC immune plug in type, style QN1, DC neutral line, 24V, 12F.4B contacts, 24 front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:930, IRS: S 34 & IRS:S 23 (as applicable). The interlocking code for this unit shall be ABCDE.(with ATC clips) Inspection: RDSO
200
2930
586000
... More
Supply of Relay AC immune, plugintype Style 'QNA1, DC neutral line, 24V, 12F/4B contacts, front 25 and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS 931A, IRSS60, IRSS34 and IRSS23 (as applicable). The interlocking code for this unit shall be ABDFH. (with ATC clips) Inspection: RDSO
150
3143
471450
... More
Supply of AC immunized plug-in-type Style 'QSPA1', DC Neutral line, slow to pickup, 24V, 8F.4B 26 contacts, front and back contacts metal to carbon, complete with plug board, retained clip & connectors conforming to BRS:933A, IRS:S 60, IRS:S 34 & IRS:S 23 (as applicable). The interlocking code for this unit shall be ABDEJ.(with ATC clips) Inspection: RDSO
200
4367
873400
... More
Supply of Cable termination racks size 880mm x 2 Meters made out of 50mmx50mmx6mm thick MS angle with stainless steel nuts and bolts for fixing of the rack with POWDER COATED and drilling suitable 27 holes to suit hylam sheet and relay frames complete as per standard practice with tripod bases and reel insulators (for K rack, P rack and power rack) and with cable ladder of width 400mm and length of 2 Mtr.. The thickness of angle to be 5mm. two angles of 40mmX40mmX5mm to be supplied at both ends and supporting flats of 25mm X5mm. Inspection; Consignee
6
5125
30750
... More
Supply of terminal block 1 way PBT 60mm as per RDSO Drg.No. SA.23745/Alt.5 & IRS S.75/91 & IRS.S.23 with latest amendment. Inspection: RDSO
300
61
18300
... More
607 Supply of Non-deteriorating type of fuse holders & fuse links - electric fuse for Railway signalling Rate (in Rupees)d voltage 240 AC/DC to Specn. No. IRS S.78/92 (IRS-S-78/97 Tentative) IS:13703 (part 2/sec2):1993 suitable for E1 fuse 20Amps SC-20 Holder Safe Clip / knife edge type size E1 (R-SS) amp.
-
-
136600
... More
Supply of indoor cable 60 core X 0.6mm as per IRS S.76/89 amend no.2 or latest. Inspection: RDSO
1
128938
128938
... More
Supply o f PVC insulated wire copper conductor 16/02mm to ATC IS:694 to RDSO specification no.IRS.S76/89. Each coil of 100 mts length. To be procured from RDSO approved firms. (Red-100, Black- 100,Yellow-100,Green-100,Blue-100) Inspection: RDSO, Per unit means Coil
500
797
398500
... More
Supply of PVC insulated wire multi-strand copper conductor 10 Sq.mm flexible Specn.IRS.S76/89. Amendment No.2 or latest. Each coil of 100 mts length. To be procured from RDSO approved firms (size 140/0.3mm) (Red-25 and Black-25) Inspection: RDSO, Per unit means Coil.
50
9390
469500
... More
Supply of PVC wire coils of size 28/03 multi strand (flexible). Specn.IRS.S 76/89. Amendment No.2 or latest. Each coil of 100 mts length. To be procured from RDSO approved firms.( Red-300 and Black-300) Inspection: RDSO, Per unit means Coil.
600
1635
981000
... More
Supply of Battery charger of 230Volts AC / 110V DC 30 Amps single phase, signalling / telecom. Instrument as per RDSO Specn. IRS S.86/2000 Amd.1 or latest. Inspection: RDSO
3
74911
224733
... More
Supply of Battery Charger 230V AC /24-26V-28V DC20 Amps Capacity. RDSO Specification No.IRS.S.86-2000.(or latest) (for Telecom. Application) suitable for Axle counter application. Inspection: RDSO
2
21988
43976
... More
Supply of Transformer Rectifier 11OV AC Input /24V-30V DC Output, 5 Amp capacity, as per spec. IRS S 91-2014 with amendment 1 to be procured from RDSO approved firms. Inspection: Consignee
10
3196
31960
... More
Supply of Universal locks with one key for every ten locks. Inspection: Consignee
50
60
3000
... More
Supply of Cement Portland / Ordinary, confirming to ISS: 269/76.(To be supplied at site as per requirement and as per instruction of site engineer) Inspection: Consignee
2
4027
8054
... More
Supply of electric track drilling machine similar to model no WD 34 C,RALLI WOLF Make with suitable horizontal stand with attachments to drill holes of various sizes up to 7mm to 13mm Inspection: Cosignee
3
15161
45483
... More
Supply of steel stools 18" height neatly finished and painted. Inspection: Consignee
10
334
3340
... More
Supply of Jerry can 2 0 Ltrs capacity white a s p e r the requirement of SI at site. Inspection: COnsignee
10
105
1050
... More
Supply of Navtal Locks godrej make 25/50mm as per instructions of SE/SSE(Sig) at site. Inspection: Consignee
20
384
7680
... More
Supply of key chains with ring with plastic name plate of 60mmx20mmx3mm duly engraving station name on one side and key particulars on one side as specified by the site incharge. Inspection: COnsignee
20
23
460
... More
Transparent plastic cover superior quality for keeping circuit diagram sheets with provision for hanging size "C". Inspection: Consignee
1000
40
40000
... More
Printing, Binding & supply of the following registers with latest proforma given by in-charge officer each register of 100 pages.. a) Station Asset Register b) Deficiencies c) Officer Inspection book d) Work site orientation classes note book. e) Station Message book f) Infrigement measure book for signal gears g) Route cancellation register. h) Relay room Key register i) Selection circuit testing j) Cable testing summary k)Siganl 46 maintenance record. l) Power Supply systems(Battery maintenance ) m) Mechanical Signalling Register. n)Axle Counter Maintenance Register o) Block instrument Maintenance Register. p) Track circuit maintenance Register. q) Lifting barriers maintenance Register. r ) Electrically operated point maintenance Register. s ) Electronic Interlcoking Maintemnance Register. t) Location box maintenace Register. u) Earth Testing record Register. v) Cabin/Relay room register. w) Joint Inspection of Points and Crossings register. x) Block Proving Axle Counter Register. y) Diesel generator /Solar panel Register. Inspection: Consignee, Per unit means Per Regr. (Inspection by Consignee)
200
70
14000
... More
Supply of tool kit as under: (1)Standard Tool Bag (CANAVAS) - 1 No. (2) Soldering Iron (Make "Soldron / Philips) - 75W/230V (to be kept at equipment room) - 1 No (3)Multi meter (Digital PHILIPS/FLUKE/18S Rish B) Upto 20M.ohms 10A, 5KHZ, 2mV to 750V AC, 200V DC -1 No.TRUE RMS METER (4) Screw Driver set of 6 pieces (Taparia Make) - 1 No (5) Cutting plier 6" (Taparia ) - 1 No. (6) Side Cutter (wire cutter) 6" (Taparia ) - 1 No. (7) Nose plier 6" (Taparia) - 1 No. (8) Wire stripper (Taparia ) - 1 No. (9) Fiber tape 3 meters - 1 No (10) Scale 6" (for tongue rail opening) -1 No (S.S.material) (11) Spanner wrench 6mm to 22mm (auto adjustable spanner) Taparia make -1 No (12) Spanner wrench 10 mm to 30 mm (auto adjustable spanner) Taparia make -1 47 No (13) Spanner wrench 15mm to 41mm (auto adjustable spanner) Taparia make -1 No (14) Hacksaw frame with blade 6", 4" width (for cutting cable) - 1 No. (15) Hammer 3.0 lbs 1 No. (16) Chisel 6" (for cutting bond wire) - 1 No. (17) Poker 8" (for removing bond wire, bond pin )- 1 No. (18) Screw Driver Heavy duty 12" with plastic handle (for opening of detector contacts (Taparia ) - 1No. (19) Test piece (Pt wedge piece) - 2 No. (20) Torch light ( preferable LED rechargeable type) - 1 No. (21) Universal key - 1 No. (22) Box spanner for 6 way terminals (13mm) (for opening ARA terminals) - 1 No. (23) Nylon brush (for cleaning purpose) - 1 No. (24) sealing Plier - 1 No. (25) Crimping Tool (1.5 to 16 Sq.mm) - 1 No. (26) Feeler gauge - 1 Set (27) TSR Meter (for testing condition of track circuit) - 1 No. (28) Wooden Block (60mm x 60mm) (for providing between Tongue rail & Stock rail during maintenance) - 1 No. (29) Track shorting clips - 1 No. (30) Tester - 1 No. (31) Flat file 12" length x 1" width - 1 No. (Inspection by Consignee)
1
31434
31434
... More
Supply of double key lock. Inspection: Consignee
6
303
1818
... More
Supply of wire rope steel galvanized 6/19, 26 SWG for double wire Signalling to spec. No. IRS. S3- 61 ,Amd-1. Inspection: Consignee
500
81
40500
... More
"Supply of basic material to construct unit maintenance free earth consisting as per RDSO spec no. RDSO/SPN/197/2008 or latest consisting of : a) copper bonded steel electrode of 3.0m long, 17.0 mm dia with 50 copper bonding thickness mini 250 micron and UL listed and marked--1 no. b)Earth enhancement compound of RDSO approved brand supplied in sealed bags of min 10 Kgs-03 No. c) Copper strip of 150X25x6mm to terminate earth rod-1 No. d) Copper strip of 300X25x6mm (MEEB)-1 No. e) Copper strip of 150X25x6mm to (SEEB)-1 No.(inspection by RITES) "
60
16837
1010220
... More
"Supply of 35 Sq.mm Multi-strand single core PVC insulated copper cable as per IS:694 for connecting Main earth electrode to MEEB in the equipment room in duplicate." Inspection: RITES
2500
303
757500
... More
Supply of 16 Sq mm Multi-stand single core PVC Insulated copper cable as per IS:694 for connecting MEEB to SEEB and SPDs and SPDs to MEEB. Inspection; RITES
1000
144
144000
... More
Supply of 10 Sq mm Multi strand single core PVC insulated copper cable as per IS:694 for connecting various equipment to SEEB. Inspection: RITES
1000
87
87000
... More
Supply of titanium coated 7.2mm drill bits of Bosch/Addison make Inspection: Consignee
100
94
9400
... More
Supply of channel bond pins single groove 7mm dia (100Nos) Inspection: Consignee
100
41
4100
... More
Supply of various type of lugs as per instructions of site in charge Inspection: Consignee
1000
4
4000
... More
Supply of PVC conduit pipe 3 Mtr. length 25mm dia with bends Inspection: Consignee
50
35
1750
... More
Supply of copper lugs10 Sqmm of reputed make Inspection: Consignee
1000
8
8000
... More
Supply of Corium Z 105 Battery cleaner and terminal conditioner of 500ml tin can Inspection: Consignee
4
3507
14028
... More
Supply of Copper eyelets to suit 16/0.2 wire Dowell's make Inspection: Consignee
1500
2
3000
... More
Supply of Copper eyelets to suit 10.sqmm wire Dowell's make Inspection: Consignee
800
4
3200
... More
Supply of 2 N/2R Micro switch, L&T or Siemens make. Inspection: Consignee
8
378
3024
... More
Supply o f HDPE telecom d u ct w ith outer diameter o f 4 0 m m a n d inner diameter o f 33mm 63 permanently lubricated as per Specn. No. RDSO/SPN/TC-/45/2006 Revision 1.0 or latest or as per specification TEC GR No.G/CDS-08/02,NOV 2004 or latest. HDPE pipe shall be supplied along with 4mm dia polypropylene rope of approved quality inside wherever required. The length of HDPE telecom duct should be 1 KM. End plugs to be provided along with drum (free of cost) (2 No. per Km.). Inspection: RDSO
30
45226
1356780
... More
1109. HDPE duct associated accessories and tools as per the specification of NS.1108
-
-
2490
... More
Supply of Thermo shrinkable jointing kit as per Spec. No. IRS TC. 77/2012(Rev.3 and Amd.3) for all types joints suitable for 6 Quad Jelly filled UG cable. Inspection: RDSO
200
1923
384600
... More
Digital Multimeter Fluke or Rishab 15S. Inspection: Consignee
3
5720
17160
... More
Supply of E type locks of different wards as per requirement with key per E- type lock to Drg. No. SA.3376/M/Latest and RDSO Specn. No. IRS. S.30/64. Inspection: Consignee
60
560
33600
... More
"Supply of WAGO Terminal as per RDSO Specification No.RDSO/SPN/189/2004 Ver 3.0 which consists as per following: a) 2 Conductor disconnect type terminal block as per Model No. 280- 870 -- Qty: 6 No.(2 68 Conductor Disconnect Terminal Block for Test and Measurement with knife disconnect) Housing Color: Grey & Disconnect Color: Orangeb) End plate type 280-374 suitable for disconnect terminal of Model No.280-870 -- Qty: 1 No. (End & Intermediate Plate) Color: Grey c) End stop terminal block type 249- 117 -- Qty: 2 No. (Screw less End Stop 10 mm/ 0.394 in wide)d) Shorting links (16A) as per model 280 402.Qty.6Nos.(Adjacent Jumper, Insulated 24A)" Inspection: RITES
400
486
194400
... More
Supply of filter unit for Block Instrument as per IRS S.68/89. Inspection: Consignee
4
10350
41400
... More
Supply of Block bell equipment to IRS TC 44/88. Inspection; Consignee
4
1739
6956
... More
Supply of Desk type 2 wire , 12 way DTMF selective calling group telephone complete as per specification IRS. TC. 80-2000 with suitable power supply unit. Inspection: RDSO
50
6282
314100
... More
"Cutting of rock up to a depth of 300 mm and width of 300mm where rock is visible from surface, concreting to ground level after laying cables with 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal 4 size and curing of concrete to the required number of days, except in bridges, culverts, level crossings, track crossings, cable pits, rocky soil including marking of cable alignment, clearing of debris etc., complete to the finished item of work as directed by site in-charge. Drg No.SK/CN/NEW/1. All the material is to be arranged by contractor "
400
460
184000
... More
Cutting of rock to a depth of 200 mm and width of 200 mm where rock is visible from surface to a depth more than 300 mm up to 550mm, excavation of trench with width 300mm above rock concreting 5 200mmx200mm after laying of cable with 1 cement: 2 sand : 4 graded stone aggregate 20mm nominal size and curing of concrete to the required number of days, refilling with excavated soil ramming and consolidation except in bridges, culverts, level crossings, track crossings, cable pits, rocky soil including marking of cable alignment, clearing of debris etc., complete to the finished item of work as directed by site in-charge. Drg No.SK/CN/NEW/3. All the material is to be arranged by contractor.
500
241
120500
... More
Track crossing by horizontal boring method based on the drawing no.DRM/J/6735 dated 7-8-03 6 (enclosed) and as advised by the engineer at site. This includes the supply and insertion(pushing) of GI pipe (80mm) confirming to IS.1239 heavy class in the bore drilled with the coupler between two pipes. All the joints of casing pipes should be tight and leak proof.
1000
1403
1403000
... More
Trenching under Rails for crossing the track(Track crossing) and refilling of trenches as per RDSO drawing No.SDO/CABLE LAYING /009. The track crossing shall be done at right angles.The depth of cable trench 7 shall be 1.2 Mtr. below the rail flange. The depth between top cable and the level of rail flange of the rail shall never be less than 1.0 Mtr.. The ballast shall be Stored separately while making the trench and the earth soil shall be stored separately. while re-filling the trench, the earth soil has to be filled first to the ground level and the ballast has to be properly put in the track. this work has to be done under supervision of supervisor of S&T and supervisor of P.Way
500
141
70500
... More
Breaking of metal/ tar road and refilling after laying the cables as per drawing no.SDO/CABLE LAYING/010. The surface of the road shall be concreted to match with the old surface
150
142
21300
... More
Laying different type cables in the trench. Termination covered elsewhere.
100000
5
500000
... More
1916. Cable laying at culverts/bridges -High flood level: Excavation of cable trench of 300mm width and 800 mm depth in the ramp from the foot of the culvert on to the top of the culvert by storing the ballast and 11 the excavated soil separately and laying of HDPE pipe( to be supplied by Railways) duly. The pipe is to be laid, the cables required are to be drawn using bends( to be supplied by Railways) as per the drawing No.SK.15/11. After drawing the cables the bends are to be concreted to a size of 300mm X 1000mm X 1000mm using required shuttering /moulds. Except the HDPE pipe and bends, all other material is to be arranged by the contractor.
-
-
137600
... More
Supply & laying of G.I Pipes 50mm dia. medium quality to specification IS.1239 (part-I) 1990 and 12 galvanised to specification IS.4736-1986 On bridges , culverts, trench with channel ramps on either end of the culvert/bridges. Clamping arrangement with MS rackets for fixing of GI pipes on bridges/culverts, small holes of 5mm are to be drilled in the pipe before laying of the pipes.
200
254
50800
... More
Providing of channel ramps for drawing cables at bridge/culvert entries duly providing GI bend/ 13 flexible conduit 8 cm diameter and constructing channels from a depth of 0.8 meters to surface as per detailed technical spec. (Concreting to be done at the ratio of 1:4:8 - Cement, sand and fine metal for concreting will be supplied by contractor )
100
496
49600
... More
1923. Provision and laying in position cement concrete of 1 cement:3 sand:6 graded stone aggregate of 20mm normal size excluding cost of cement, centering and shuttering ( including transportation of all the material) .
-
-
137525.9
... More
Supply and fixing of MS-'C' channel of size 100mmx 50mm x 1200 mm with suitable clamps as per 15 drawing No. S&T/ RE/78/2/76 and fitting to GI pipe 65/50mm (to be supplied by Railways) of spec. IS-1239/ Part- 1/ Light with couplings and with suitable clamps on Girder Bridges without drilling holes in the girders. GI Pipes are to be drilled with 6 holes of 1/4" dia. per metres around the pipe in zig zag manner before laying the 6 metres pipe.
120
495
59400
... More
Jungle cutting along with the cable route
20000
4
80000
... More
Cutting of masonry walls of at stations, cabins buildings and other locations as indicated by Railway engineer at site to a depth of 0.75 meters and supplying and fixing 50mm GI pipe The leading in arrangement shall be as per drawing no. RE/S&T/ ALD/SK/ 161/ 81.
20
610
12200
... More
Test lamp arrangement in LBs/RE cuttings.(Auto mobile handle type). Per unit means per location.
100
119
11900
... More
Supply and fixing of teak wood reapers suitable for Full location Box with 50 mm width x 20mm thick and length of 940mm after applying two coats of wood primer. Per unit means per Reaper
70
130
9100
... More
Supply and fixing of teak wood reapers suitable for Full Box 75mm width x 20mm thick and length of 940mm after applying two coats of wood primer. Per unit eans Per Reaper
50
159
7950
... More
Supply and fixing of teak wood reapers suitable for half Box 75mm width x 20mm thick and length of 470mm after applying two coats of wood primer. Per unit means per Reaper
50
97
4850
... More
Supply and fixing of 20mm thick teak wood planks for Keeping Equipment in the Full Box after applying two coats of wood primer. The approximate size of the flank is 940mmx20mmx300mm. Per unit means per Plank
50
490
24500
... More
Supply and fixing of Teak Wood planks of of sizes as instructed by the site in-charge with smooth 23 finishing surface to be provided where ever required such as in location boxes relay room, equipment room and battery room, Fine wood polish of approved quality to be applied for two times after thorough application of emery paper. Fixing bolts and wood polish supplied by the contractor painting (Hardwood, paints, fixing bolts are to be arranged by contractor).
1.5
43600
65400
... More
Numbering location box as per standard practice and writing all termination particulars inside the location box as per details. This includes all main and tail cable particulars, writing of cable numbering of cables, polishing teak wood boards in two coats and painting hard wood shelves in two coats of black enamel.
150
280
42000
... More
Fixing relay bases, wiring in location boxes, bunching, fixing of relays as per circuit diagram. This includes fixing of condensers, resistance, 6 way / 1 way terminals/ WAGO, ND type fuses, LED indicators for fuses as per type fuses, LED indicators for fuses.
400
156
62400
... More
Earthing and soldering of cable armour. Per unit means per cable
2600
21
54600
... More
"1.Installation of single earth(maintenance free) including the following:- welding and fixing of copper tape (used as bus bar) welding of cadmium bronze cable to copper plate using material supplied vide item no. 1,2 of SPD of Sch-A . All the material supplied for mounting of copper tape, exothermic weld materials, tools and fixtures for welding copper tapes shall be arranged by contractor.(a) Digging /Auguring/Boring of single earth pit of 100mm to 125 mm dia to the depth of approx. 2.8 meter.(b) Insertion of 3.0 meter electrode and penetrating it at least .2 meter by pushing gently with sledge hammer where the natural soil is assumed.(c) Filling of earth pit with earth enhancement compound (EEC) in slurry from and backfilling.(d) Carrying out exothermic weld 29 connection on single earth electrode to a copper tape of 150X25X6mm.(e) Carrying out exothermic weld connection on the copper tape of 50X25X6mm on earth electrode for connecting two 35 Sq mm cables for redundancy.(f) The exothermic welding material for bonding the earth system shall be procured from RDSO approved firms, which includes graphite moulds, clamps, weld metal powders.(g) Digging a trench to a depth of at least 0 .5 Mtr. and run the two 35 Sq mm earth conductor ( procured against supply item) from earth pit to MEEB. (h) Routing and termination of two 35 sq mm earth conductors in trench from earth pit to 300X25X6mm MEEB, which is to be fixed inside the equipment room with two insulation studs.(i) 300X300X300 mm (inside dimension) concrete earth pit with a concrete lid, approx 50mm thick with pulling hooks, shall be provided to cover the pit. Back side of the cover will be painted in black and dare of the testing and average resistance value shall be written "
60
4276
256560
... More
Routing and connecting of all the SPDs in the equipment room to MEEB with 16 sq mm copper cable using copper lugs with stainless steel nut and bolts (for item procured against supply).
100
23
2300
... More
Routing and connecting all the equipments in the equipment/relay room to MEEB/SEEB with 10 sq mm copper cable using copper lugs with stainless steel nuts and bolts and fixtures. The work includes laying and routing the copper cable in PVC pipes/conduits and fixing them on wall.
100
23
2300
... More
Manufacturing, Supply, painting and fixing of markers of G/P/C/A/IB Markers/Number plates with engineering grade reflective sticker on MS sheet with clamps as per drawings/as per site incharge. including all fixing materials.
40
308
12320
... More
2205. Supply and fixing of wire mesh for the following signals, duly painted with black enamel in two coats.
-
-
1452
... More
Provision of screen on signals when they fall with in 2mtrs from the live condcutor by expanding 34 metal (Size 20mmx60mm strand 3.25mm wide and 1.6mm thick) as per the instruction of site incharge. This includes supply of all the materials including the earthing arrangements drg.No. RE/S&T/S.16/T/SK/26.A.85 and Drg. No. RE/S&T/SIG Tender/alt.A/SK/13/85.
5
3058
15290
... More
Strengthening of foundations of signals, Full/Half location boxes, by carrying out the earth work around the foundation, ramming of the earth, caring out masonry work from bottom of earth work using country stones and cement masonry to prevent the earth from slipping down the bank.
150
2813
421950
... More
Wiring of Track circuits feed end, relay end complete with TLDs, batteries, chargers, track relays, 37 double lead wires, providing insulation etc,. connected with track commissioning of track circuit including provision of bracket for TLD covers and painting. Anti-tilting arrangement has to be done for track relays, chargers & batteries.
30
1004
30120
... More
Drilling of holes 7.2mm on web of the rail , providing bond wires with PVC coated wire rope. (Bond pins single grove have to be supplied by contractor - Wire rope for bonding is covered under supply portion ). Per unit means per Rail Joint.
2000
16
32000
... More
Fabrication, Supply and fixing of CALLING ON instruction boards, STOP boards with engineering 39 grade reflective sticker of size 600X900X1200 mm GI sheet, with MS angle of 75X75X6 mm with 6 meter length including paint, excavation of pit and concrete foundation etc..as per the instructions of sight in-charge. All necessary materials to be arranged by the contractor).
4
3549
14196
... More
Providing crank handle box, wiring, testing as per technical specification including concealed wiring in the wall
4
3848
15392
... More
Manufacturing arid fixing of glass fronted box (key box) made out of teak wood of size 10 inches x 16 inches.
4
255
1020
... More
Fixing of PVC pipes & bends, drawing of required wires through the same up to functions like 42 control telephone, Dy.control telephone, magneto phones inside SM's office as per circuit diagram. This includes supply and fixing of required DPDT and rotary switches, PVC pipes and bends 25mm dia with 2mm wall thickness, Lightening dischargers and painting of particulars.
2
3628
7256
... More
Erection of Relay rack 1way/2way/4way/CT Rack with scaffolding suitably concreting tri-pod bases 43 using J-bolts, fixing rack supporting of size 50x50x6 mm on to the wall. Reel insulators are to be provided for insulating the rack from the scaffolding & tri-pod bases. ( payment based on number of equivalent 1 way relay racks). Per unit means per one way rack.
5
341
1705
... More
Fabrication and supply of MS frames to suit 'Q' series relays to accommodate 6 No. in each set as per Drg.No. B.SG.CN. MISC.9.98 duly drilling required holes for relay bases (All materials such as frames, bolts, nuts and washers to be supplied by the contractor) (Only Relay bases will be supplied by the Railways).
5
294
1470
... More
Fixing relay bases on the relay frames erected in Relay Room, Wiring of all types of relays by drawing various sizes of wires/multicore cable, fixing fuses, condensers, resistances, LEDs etc and wiring duly soldering the same as per approved circuit diagram, testing point to point before soldering and after soldering, bunching and lacing as per detailed technical specification.Different colour codes and sizes of wire to be used as per standard practice. This also includes, provision of all PVC sleeves required to be provided. Copper lugs to suit 45 to 16/02 wire and neat bunching, lacing with Modi Nylon / Twine thread and using PVC dotted tape with buttons were required. This also includes soldering all the wires in the relay room with Rosine core of IS Spec. 1921 ( 60 % Tin and 40% Led). Soldering should be done as per standard practice. This also includes inserting the clips, point to point testing as per the circuit diagram and plugging relays to Relay bases (except Inter-cables, relays other materials such as Rosine core, flux, nylon thread. PVC dotted tape should be supplied by the contractor). Point to point testing should be done in the presence of Engineer-in-charge as instructed in two stages, one before soldering and the other after soldering.
100
174
17400
... More
Fixing of the following on pre-erected relay racks.
-
-
25230
... More
Preparation of Contact Analysis for 'Q' style relays as per detailed technical specification.
200
14
2800
... More
Alteration of database, faults, simulations in Data Loggers and all connected places (like HQ, FEP, STATION etc.,)
1
18370
18370
... More
Indoor Painting as per technical specification for 4/5/6 road stations.
4
3301
13204
... More
Provision of one skilled and 2 unskilled staff round the clock to attend to teething trouble of the installation along with SI/CSI after the installation has been brought into commissioning. The work includes routine maintenance, failure restoration as per the direction of the SI/CSI. Per unit means per month
6
43437
260622
... More
Fabrication, fixing of required configuration of key in point machine for grouping of crank handle of point machines.
15
82
1230
... More
Non interlocking arrangements
2
12300
24600
... More
2701. Transportation of materials from any Stores to Site and vice-versa including loading and unloading.
-
-
945900
... More
Installation and wiring of all power supply equipments, viz DC Distribution system, chargers, 54 transformers,batteries etc, and its wiring as per the tech specn No10.8( lacing ,bunching with copper eyelytes/lugs required for crimping 10sqmm wire are to be supplied by the contractor. for power panel, bolts,nuts and fixing screws are to be arranged by the contractor. hylam sheets and wire coils will be arranged by the railways.
1
12227
12227
... More
2802. Initial Charging of Secondary Cells:-
-
-
13200
... More
Testing of wires drawn point to point using buzzer. (Before and after soldering.) Per unit means per Sheet
350
316
110600
... More
Supply and fixing of 'AHUJA' make horn type loud speaker 15W 8 ohms impedance.
2
937
1874
... More
Supply and fixing of Electronic Hooter unit 24/110 DC of approved design/make able to drive 2 No. of Speakers of 8 ohms 15W.
2
1820
3640
... More
Fixing and wiring RKT/EKT for siding or L.C. Gate interlocking as per Tech. /Specn. No. 15.12. This includes installation of Magneto telephones at location, gate, SM's office etc.,
4
602
2408
... More
3201. Releasing of the following equipments without causing damage, stacking neatly at a centralised place near the site of work as shown by the in charge, and handing over the same to the Stores depot as per the inventory made. Per
-
-
18322
... More
Carrying out circuit alterations in the existing location boxes as per the new circuits which require excavation and releasing unwanted cables from the location box and taking new cables inside the location, clamping of new cables, filling the location box with standard up to the bottom of location and plastering.
40
612
24480
... More
Supply and fixing of different sizes of PVC casing /Pipes as required by Railway at site by fixing /clamping to the wall for indoor wiring purposes. . The material required carrying out the wiring such as soldering, lacing, casing, fixing clamps; screws etc are to be provided by contractor on his own cost.
300
32
9600
... More
Straight through / derivation with/without transformer joints: Installation o f Thermo shrinkable jointing kits for straight through / derivation joints for LC gate, pump houses etc where VF transformers are not 64 required and derivation joint b y using 2 T transformer ( t o b e housed i n t h e joint). Th is includes tapping of nominated Quad at a specific location shown by the Railway Engineer at site to the jelly field cable already laid. All material including vulco tapes except thermo shrinkable jointing kit shall b e supplied b y the contractor. (Refer Annexure for instructions on cable jointing). Per Unit = per Joint.
100
979
97900
... More
Laying of HDPE duct 40/33 mm dia. in the trenches and in protective works already provided.
20
4956
99120
... More
"Supply and installation of rack mounted 24F FMS fiber part no. fms 1U 24FS 24FP including 24Nos 0.2db FC/PC adaptors and 24numbers 900 micron 1 .5 meter FCPC pigtails. RDSO Spec No. RDSO/ SPN/TC- 037/2000 (Ver.3) or latest. "
10
16285
162850
... More
"Blowing of armored optic fiber cable (OFC Cable supplied by Railways) into the duct supplied in 67 supply portion by using blowing machine and associated works. Before blowing the duct integrity shall be tested. If any defect i s found during duct integrity test, the entire length o f HDPE duct from one chamber t o another chamber is to be replaced by the contractor at free of cost. "
20
7382
147640
... More
Supply and Installation o f OFC joint enclosure and splicing o f Optic fiber cable (24 fibers) and 68 testing as per technical specification No. GR OJC-2/02 Sept 2003. Supply of Splice Enclosure (24 fiber) shall be of T VS make Part No.1500-L18X-XX a s p e r Board specification o f T EC a n d Schedule o f supply enclosed. All materials including Fusion splicing machine used f o r fiber splicing and, OTDR f o r testing a n d other testing materials if any shall be arranged by the contractor.
15
6416
96240
... More
"Testing o f fibres between short haul station i n both direction after splicing the required fibres. Testing of OFC system complete with electronics, battery banks and handing over for Maintenance to Open Line / RAILTEL. "
4
5273
21092
... More
Supply& installation of Rack 19" wall mount 6U/500MM D with front glass door and lock and key including the following: 1U cable manager - 1 No. 1U Cantilever tray - 1 No. AC distribution box 5X5 amps - 1 No. Front panel H/W PKT of 10 Sets - 1No.
10
5356
53560
... More
Supply of Polymeric Positive Temperature Co-efficient Device (Self-Re setting type) 1.1 Amps 1 capacity with soldered 16/0.02 copper wire leads (As per required length) and crimping of copper lugs. Necessary wire coils will be supplied by the Railways. materials such as solder lead, copper lug etc., are to be arranged by the contractor within the cost of the work. Make little Fuse/TYCO/Fuzitech only Inspection: Consignee
200
130
26000
... More
Fabrication & supply of G.I. termination box for point machines of size 45 cm x 23 cm x 12 cm. The termination box to be fabricated out of G.I. sheet 10SWG and to be with 2 nos of M.S. angle of size 50x50x6mm 2 of length 1000mm each and GI pipe of 40 mm dia and length of 450mm. The termination box is also provided with teak wood plank of size 25 mm thicknesses for fixing of terminals. Necessary bolts, nuts and screws are to be provided for fabrication of termination box. (All materials are to be procured by the contractor). Inspection: Consignee
15
2579
38685
... More
Earth Leakage detector 12 channels as per RDSO Specn. No. RDSO/SPN/256/2002 with latest 3 amendment including - 1) Mounting stand for ELD and 2 fuse board to isolate from distribution board, for the following requirement of channels:. 24V DC - 1 to 4 channels 110V DC - 5 to 8 channels 110V AC - 9 to 12 channels. Inspection: RDSO
1
133187
133187
... More
Supply of Cable route locator set consisting of SEEK TECH SR 20 model receiver with active line trace frequency sand passive line trace and depth measurement on active line tracing with 5 watts cable line 4 transmitter model such Tech S7-305 with frequency indicator, power indicator, frequency mode sheet, powere ON OFF indicator mode toggle induction mode. High voltage warning and suitable rechargeabla cells for both transmitter and receiver with suitable charger with carrying case. make RIDGID or STANLAY equivalent specification only. Inspection: Consignee
1
377600
377600
... More
Supply of track feed battery charger to work on 110V/AC input to charge 1,2,3 lead acid cells of 80AH with 10A capacity with potential free contacts as per Spec No IRS: S.89/2013 version1.0 or latest. Inspection: RDSO
20
5775
115500
... More
Supply of Colour light signal unit:
-
-
273924.68
... More
M.S. Boom 5mm ia 9.5 mtrs long (dividing in two equilent two pieces nut & olts arrangements, pulling hand and boom locking arrangements etc. Boom ipe of size 0 mm ia of G.I length 10 Mtr long with 2mm thick (driving in two equivalent pieces with flange & fixing with nut & bolts arrangement, pulling handle nd oom ocking rrangements for pipe and as directed by engineer in charge at site (All materials to be supplied by the Contractor). Inspection: Consignee
2
9460
18920
... More
Resting stand made up of Channel 150mm 5mmX6mm thick for resting the boom movement frame/meeting post grouting type. Inspection; Consignee
2
4730
9460
... More
Boom ovement rectangular frame made up by C hannel 75mmX 37mmX6mm 9.5mtrs long and 9 250mm width (it should divided in two pieces nut and bolt arrangements) with necessary boom movement rollers arrangements and boom driving mechanism made up of 4 ball bearings, boom replacement arrangements etc. Inspection: COnsignee
2
16810
33620
... More
"M.S. Plate of size 20"" X20'X6mm form boom locking arrangements with front and back covers( only E ype locks will be supplied y Railways)" Inspection: Consignee
2
3610
7220
... More
M.S plate of size 12" X 6" X6mm or fixing of 3 E ype locks at in the side gate lodge. It should be drilled 18 holes and back side 10mm ut should be welded for replacement of E type locks, it to be fixed to wall. ( only E ype locks will be supplied by Railway) Inspection: COnsignee
2
1680
3360
... More
Supply of following furniture for station
-
-
255988
... More
Supply of Steel tubes galvanized ISI marked to IS:1239(part-1)/2004 in random 1 both end as per 13 IS:554 :1999 socketed at one end and another end protected with plastic protector. Socket confirming to IS.1239/part 2/1992 with amdt.1to 3(Re-affirmed 2002) Ncm, bore dia 80mm, class: medium. GI.PIPE-80MM Make: TATA/JINDAL/SAIL.Inspection: RITES
500
475
237720
... More
Supply of Steel tubes galvanized ISI marked to IS:1239(part-1)/2004 in random 1 both end as per 14 IS:554 :1999 socketed at one end and another end protected with plastic protector. Socket confirming to IS.1239/part 2/1992 with amdt.1to 3(Re-affirmed 2002) Ncm, bore dia 100mm, class: medium. GI.PIPE-100MM. Make: TATA/JINDAL/SAIL. Inspection: RITES
500
694
347200
... More
Supply, installation and testing of External Modems for T net working. Inspection: Consignee
4
47200
188800
... More
Supply of transformer rectifier 230V AC/24V DC, 1 AMP Capacity as per spec. IRS-S 91-93 with amendment-1 or latest. Inspection: Consignee
10
1000
10000
... More
Fabrication, Supply, and installation of powder coated cabinet, for the termination of power cables. The body of the cabinet to be made of 3mm thick. This includes sizing bending, providing holes 6mm dia on flat of 17 size 3mm x 25mm for mounting 1 way PBTs and 40mm dia holes on top & bott surface. 6 Nos. on each side with provision of grommet bushes for cable entry, as per the drawing supplied by the railways. Color of powder coating as per instructions of site engineer in charge. All the materials will be supplied by the contractor except 1 way PBTs. Inspection: Consignee
5
3040
15200
... More
Supply of G.I.Tape 38x6 (80-100 microns) Inspection: Consignee
100
190
19000
... More
Track bonding diagram on non-transparent acrylic sheet of thickness 4mm with alumunium beading and hanging support with screen printing, lettering and bonding diagram. Inspection: Consignee
1
6500
6500
... More
Station working order diagram on non transparent acrylic sheet of thicknes 4mm with alumunium beading and hanging support with screen printing , lettering and yard diagram.(Inspection by consignee)(per unit= per yard/per station)
1
6500
6500
... More
Wire wound resistors, 2.2 ohms/50watts Inspection: Consignee
25
84
2100
... More
Supply of 50 X 6mm GI tape for interconnecting earth electrodes.(Inspection by Consignee)
100
369
36900
... More
Supply of CLS ladder set complete with staging, supports, signal number plate, cast iron ladder base to suit 5.5 Metre post as per drg.no.SA.23153.S.2033. Inspection: Consignee
5
4422
22110
... More
Supply of 4-Aspect colour light signal unit complete to Drg. No. SA. 23004/A/M with latest amendment and IRS S 26/64. Inspection: Consignee
1
14875
14875
... More
Fabrication, supply, and designing of situation requiring disconnection notice/consent/ no consent board of size 36"x24". (details of board required to be collected from site incharge) Inspection; Consignee
1
3400
3400
... More
Supply of Speed boards 15/30 KMPH Inspection: Consignee
8
5777
46218.24
... More
Remote service terminal with portable computer terminal for Datalogger , Inspection: Consignee
2
70250
140500
... More
Supply of multi function printer up to 28 ppm print/scan/copy up to 4800x600 DPI effective output high speed USB-2.0 and memory 128MB make Samsung model No: M2876ND/HP/Brother/Epson for printing safety Reports Inspection: Consignee
2
11894
23788
... More
Supply and fixing of Rubber matting Thickness 2mm.As per Is-15652/2006 with Suitable adhesive material. Inspection: Consignee
200
2390
478000
... More
Supply of Aluminium Ladders of height 5 feet for maintainer at Relay room and IPS room. (Inspection by Consignee)
5
6799
33999.95
... More
Supply of Digital Insulator tester RISH Insu 10. Inspection: Consignee
3
4068
12204
... More
Supply of Digital earth tester along with test kit and leather case similar to RISH make. Inspection: Consignee
3
3385
10155
... More
Supply of Vacuum Cleaners Euro clean Wet & Dry or Similar.(Inspection by Consignee)
4
9690
38760
... More
Supply of Appropriate OFC patch cords (1.5 meters) for connecting FABIO or TANSY or similar with FDMS Inspection: Consignee
20
1770
35400
... More
Supply, installation, testing and commissioning of Fixed 2 mega pixel bullet - network camera with housing Specification : 1/2.8 Progressive Scan CMOS,Digital WDR, 3D DNR, 10 meters IR range, 12V DC±10%, ICR Make: HIKVISION or Similar. Inspection: Consignee
40
7665
306611.2
... More
Supply, Installation, Testing and Commissioning of 8CH NVR network video recorder Make: HIKVISION or Similar. Inspection: Consignee
4
20657
82629.12
... More
Supply, Installation, Testing, Commissioning of 2 TB surveillance hard disc suitable for 8 Channel NVR to store the video footage up to 15 days. Make: Seagate / Western.Inspection: Consignee
6
7269
43614.12
... More
Supply and installation of 19.5 inch Monitor with all connecting cables to monitor cctv cameras at location.Inspection: Consignee
6
10653
63920.64
... More
Supply, installation, testing and commissioning of 8 port 10/100 POE ethernet switch.Make:DIGISOL,HIKVISION,or D-Link. Inspection: Consignee
6
17149
102896.64
... More
Supply of FCAT media convertor pair working om single mode single fiber upto a distance of 15 42 kms , unit to have built in SC connector with one 100 Mbps ETHERNET port and one 10/100 Mbps ETHERNET port . Unit to have built in AC supply unit to support LPF, LED indicators to be available.make MROTEK/CISCO/TP link. Inspection: Consignee
8
9000
72000
... More
Overall commissioning of cameras and arrange network to head quarters. Inspection: Consignee, Per unit means Location
2
32480
64960
... More
Supply , fixing and termination of RJ-45 jacks to CAT-6 cable.Make:D-Link.Inspection: Consignee
150
15
2338.5
... More
Supply and fixing of 40mm PVC casing and caping on the walls, All required fixing items for fixing has to be arrange. Inspection: Consignee
300
67
20268
... More
Laying of different cables for CCTV cameras.Inspection: Consignee
1500
9
13635
... More
Supply of data analizing system for telecom, STM, PD MUX installation work with specifications Dell 1000 @ 7200 rpm GB HDD 64 2 Processor with Standard Display 23.8 (INCHES), RAM 8 GB DDR 4. Intel Core i5 Processor with Operating System Windows 10. All in One PC. Inspection: Consignee
2
74951
149902
... More
Supply and installation of 12U rack with depth of 600mm along with power manager , trace and cooling fans with all standard accessories. Inspection: Consignee
5
12000
60000
... More
"Supply of 1. Insulated Hexagon Socket, Size: 3/8"" SQ DR 6mm short 2. Insulated Hexagon Socket, Size: 1/2"" SQ DR 8mm short 3. Insulated Hexagon Socket, Size: 1/2"" SQ DR 18mm short 4. Insulated Hexagon Socket, Size: 1/2"" SQ DR 19mm short 5. Insulated Hexagon Socket, Size: 1/2"" SQ DR 20mm short 6. Insulated Hexagon Socket, Size: 1/2"" SQ DR 22mm short 7. Insulated Single End Spanner, Size: 10mm 8. 49 Insulated Single End Spanner, Size: 12mm 9. Insulated Adjustable Wrench, Size: 8"" 10. Insulated Adjustable Spanner, Size: 12"" 11.Insulated Reversible Ratchet, Size: 3/8"" SQ DR 200mm 12. Insulated Reversible Ratchet, Size: 1/2"" SQ DR 280mm 13. Insulated T-Handle, Size: 1/2"" SQ DR 200mm 14. Insulated Extension Bar, Size: 1/2"" SQ DR 125mm 15. Stanley make Water-Proof Medium Nylon Tool Bag 16. Electricians TRMS digital multimeter 17. MECO Clamp meter 3690 AC/DC 600A 18.Best Indian make electrical hand gloves suitable for 1000V Make: Tolsen".Inspection: Consignee
1
57256
57256
... More
Supply of Optical Time Domain Reflectometer (OTDR) main frame. Inspection: Consignee
1
483600
483600
... More
Splicing machine with accessories. Inspection: Consignee
1
362960
362960
... More
Supply o f digital cross ta lk measuring s e t a s p e r spec. n o IRS-TC 45/88 w ith latest Amd. Inspection: Consignee
1
130000
130000
... More
Integrated OFC device MAPLE 4CS device 1U height & 19" rack mountable supporting E&M/FXO/FXS & Ethernet, with built in OFC ports supporting Single mode fibre for connecting stations/IBH on 53 dark fibre; Two E1 interfaces to be available with cross connection feature; unit support dual power supply DC main/Stand by DCor AC in lieu of DC through adaptor (AC-DC through adaptor to be supplied); E&M 2W/4W 08 port module to be provided, which is configurable; 10 port Auto phone module & 10 port hot line module & 100Mbps Ethernet to be avialable in the unit; Unit is SNMP complaint, MAKE: MROTEK/ WAVES/ FABIO. Inspection: RITES
6
176701
1060211.7
... More
"Supply of UTP CAT-6E cable, un-shield twisted pair 4 cable annexure ELA 568V2/1 VL approved f ire &frame resistance 2 5 0 m H Z 24AWG American A W G wir ing ca se polythene T E C product. Inspection: Consignee "
1500
32
48000
... More
Supply of CTDR-TDR based Cable fault locator for metallic cables such as railway Signaling and Telecommunication Cables, LV power cables up to 15km range with +/-3 feet accuracy. Make Tele scout TS90. suitable batteries to be supplied along with set. Inspection: Consignee
1
246767
246767
... More
Supply of High Density Polye thylene pipes(HDPE) of 110 mm Outer Dia 10 mm wall thickness, along with one coupler for every 6 metres asper specification No.IS 4984:2016 with latest amendments and Material Grade:PE 80.(Inspection : Consignee)
1000
675
675000
... More
Supply of RFID Marker Locator Telephone HSN Code 90318000 part No.SML - T or similar). Inspection: Consignee
1
333350
333350
... More
Supply of Relay AC immune, plug-in type, style-QBAT DC Biased Track, 9 ohms, 2F-2B and contacts. Front and Back contacts metal to carbon, complete with plug board, retaining clip and connectors. Conforming to RDSO/SPN/84-88, IRS S 34 & IRS S 23 Inspection: RDSO
20
7316
146320
... More
Supply of 21KHZ/25KHZ TX Coil Assembly-25 Meters cable length (Web mounted type split G36- T212503) Inspection: Consignee
8
40000
320000
... More
Supply of 21KHZ/25KHZ RX Coil Assembly-25 Meters cable length (Web mounted type split G36- R212503) Inspection: Consignee
8
40000
320000
... More
Supply of 21KHZ/25KHZ TX Coil Assembly-15 Meters cable length (Web mounted type split G36- T212503) Inspection: Consignee
6
36000
216000
... More
Supply of 21KHZ/25KHZ RX Coil Assembly-15 Meters cable length (Web mounted type split G36- T212503) Inspection: Consignee
6
36000
216000
... More
supply of 10pair PVC SWBD cable 0.5mm dia annealed copper conductor PVC insulated, PVC sheathed telecom cable as per TEC approved Spec. No. GR/WIR/06/03 March-2002(Cable length each bundle 100Mtrs.) Make: Deltron/Surabhi Inspection: Consignee
1000
48
48750
... More
"Supply o f 20pair PVC SWBD cable 0.5mm dia annealed copper conductor PVC insulated, PVC sheathed telecom cable as per TEC approved Spec. No. GR/WIR/06/03 March-2002(Cable length each bundle 100Mtrs.) Make: Deltron/Surabhi. " inspection: consignee
1000
60
60900
... More
Supply of 50 pair PVC SWBD cable 0.5mm dia switch board cable as per RDSO Spec. No. IRS.TC.24-91 or latest. Inspection: Consignee
500
141
70595
... More
Supply and installation of 12U rack with depth of 600mm along with power manager , trace and cooling fans with all standard accessories. Inspection: Consignee
10
12000
120000
... More
Supply of Managed Expandable rack type STM-1/4 ADM L1.1 as per technical Spec No. TEC GR NOTEC/GR/TX/SDH O4/O4 JAN 2011 with two directions STM 1 aggregate optical interface equipped for 21 E1's 68 and 4 nos. o f 10/100 base T ethernet ports, order wire power supply units sub rack installation materials and accessories, manuals etc. The equipment should be fully wired for its ultimate capacity and provide redundancy for power supply and synchronization. Similar t o Model-TJ1400. Addition of the node into NMS of RailTel/SCR shall also be done by the OEM of the equipment. Inspection: RDSO
2
180368
360736.2
... More
"Supply o f 2 5 watts VHF sets with connecting feeder cable base unit, antenna(3dB), hand set, battery of 12V DC 80 AH cap., connectors, 230V AC/12VDC/10A charger along with related accessories of GM 338 of Motorola make or equivalent make. "Inspection: Consignee
2
24900
49800
... More
Excavation of pit, casting concrete foundation and erection of apparatus case full size as per Drg. No. SK/CN/1/89/A/1 and fixing of 1 No.of 'E' type lock for the front door, fixing of one hylam sheet of 1000mm X 940mm X 10mm thickness and painting the apparatus case inside and outside with one coat of redoxide and two coats of aluminium paints (foundation bolts and nuts,' E' type lock, cement, river sand, stone jelly of size 20/20mm, hylam sheet of size 1000mm X 940mm X 10mm, paints, varnish, fixing bolts and nuts and all other miscellaneous material required for the work shall be supplied by the contractor).
75
9875
740625
... More
Excavation of pit, casting concrete foundation and erection of apparatus case half size as per Drg. No.SK/CN/1/89/B/1, fixing one 'E' type lock for the front door and latching arrangements for the back door and 2 fixing of one hard wood shelf plank 37mm thick and painting the apparatus case inside and outside with one coat of redoxide and two coats of aluminium paints (foundation bolts and nuts, E type locks, cement, river sand, stone jelly of size 20/20mm, hardwood plank of 37mm thick, paints, varnish, fixing bolts and nuts and all other miscellaneous material required for the work shall be supplied by the contractor).
20
6967
139340
... More
Excavation of pit, casting concrete foundation as per Drg. No. SC/N/CN/ 62 / A / 1 using metallic templates, for erection of Colour light Signals upto 4 aspects (foundation bolts, cement, river sand, stone jelly of size 20/20mm dia and all other miscellaneous materials required for the work shall be supplied by the contractor).
10
5008
50080
... More
Erection of surface base, signal pole, mounting of Colour Light Signal upto 4 aspects complete on signal pole / offset bracket, (for LED / filament bulbs) with lenses, triple lamp holder, filament switching units, CLS transformers, current regulators (whichever is applicable), fixing of ladder with platform complete and concreting of ladder shoe, fixing of number plates, marker board, lenses guard, fixing of speed Limit board, whichever is necessary, termination tail cables, wiring of signal unit with PVC wire 3/0.75mm copper, provision of EWS locks, 4 and painting of one coat of redoxide and two coats of aluminium/enamel paints. When the aspect is fixed on offset bracket using 'U' bolts and nuts, a through bolt shall be provided by drilling of hole in the signal pole to prevent the offset bracket from sliding down. Item 4 Contd., (Supply of surface base, offset bracket, CLS pole, CLS aspect complete, ladder with shoes and platform, Speed limit board, LED aspects, current regulators, lamp holders, lamps, filament switching unit and CLS transformer is not covered in this schedule). ['U' bolts and nuts, through bolts and nuts, cement, stone jelly 20/25mm dia, river sand, Signal Colour Rings, wire PVCV 3/0.75mm copper, lens-guard, all fixing bolts and nuts, lead wood, paints PVC/Nylon sleeves, enamelled number plates, enamelled marker boards, EWS locks, and all other miscellaneous materials for the work shall be supplied by the contractor).
10
5501
55010
... More
Excavation of pit and casting concrete foundation as per Drg. No. SC/N/CN/ 62 / B / 1 using metallic templates, for erection of GROUND TYPE Shunt signal. (Foundation bolts and nuts, cement, river sand, stone jelly of size 20/25mm and all other miscellaneous materials for the work shall be supplied by the contractor).
5
2519
12595
... More
Erection of Ground type shunt signal complete including surface base, signal pole, LED aspects/Lenses, bulbs with holders (whichever is applicable), fixing of lens guards, number plate, termination of 6 tail cables, wiring of signal unit with PVC wire 3/0.75mm copper, provision of EWS locks and painting of one coat of redoxide and two coats of Aluminium /.enamel paint, (Supply of Ground type shunt signal complete including surface base, signal pole, LED aspects, holder, bulbs and lenses is not covered in this schedule). [Wire PVC 3/0.75mm copper, lens guards, EWS locks, enamelled number plates, bolts and nuts, lead wool, paints and all other miscellaneous materials shall be supplied by the contractor).
5
2097
10485
... More
Fixing of junction type route indicator - 1 way to 6 way - complete / fixing of additional limb to the existing route indicators, termination of tail cables, wiring as per approved circuits diagram using wire PVC 7 3/0.75mm copper, provision of required number of EWS locks, wire mesh and painting. (Supply of junction type Route Indicators - complete and additional limb is not covered in this schedule). [3/0.75mm wire PVC fixing bolts and nuts, EWS locks, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor] -
-
-
1824
... More
Fixing of Offset brackets using 'U' bolts and nuts, erecting of Calling On Signals/'A' marker lights, termination of tail cables and wiring using wire PVC 3/0.75mm copper, provision of EWS lock, number plates/ 8 markers boards and painting. The work also includes drilling suitable holes on the CLS post and provision of a through bolt with nut to prevent the Off-set bracket from slipping down. (Supply of Calling On Signal / 'A' marker light, LED aspect / holders and bulbs and off set brackets is not covered in this schedule). ['U' bolts and nuts, through bolts with nut, wire PVCV 3/0.75mm copper, EWS lock, Enamelled number plates, wire mesh, PVC/Nylon sleeves, paints and all other miscellaneous materials shall be supplied by the contractor].
5
1427
7136.25
... More
Supply, painting and fixing of cable Gland Plate for full / half GKP box as per site requirement.
200
533
106600
... More
Supply of approved quality of paint manufactured by Asian/British/Johnson and Nicholas accepted by DSTE/ASTE and Painting of all S&T gadgets in two coats duly scarping the rust as directed by SSE/SE at site, the colour to be used as per standard practice and as directed by SSE/SE at site.
2500
78
195000
... More
Installation of Earth Leakage detector 12 channels.
2
8000
16000
... More
Labour assistance for SE/JE in day to day works, Carrying the tools & equipment etc. watch & ward during the course of execution of work as per the instructions of concerned SE/JE (As per Chief labour commissioner letter F. No.1/13(6)/2017-LS-II Dt.20.4.17). Per unit means Per Day
720
653
470160
... More
Shifting of existing working functions like signals/Shunt/Calling on/Points/Track circuits etc.,from old cable to new laid cables carefully without affecting the traffic under disconnection/blocks. Per unit means per Function.
200
1460
292000
... More
Transporting and supply and installation of Concrete (RCC) route indicators at intervals of 50 15 meters as per technical specification. They should be of standard RCC with letters " one side "SCR" and the other side "S&T cables" as per drawing SK 12/10 of RVNL/SC . In case of telecom quad cable joint locations it shall be painted with red color.
500
807
403500
... More
Any other USSR 2010 items of SCR USSR as per the instructions of engineer in charge
1
200000
200000
... More
Provision of Security guards round the clock beeet from UP Home Signal to DN Home Signal to avoid theft of signaling gadgets in 12hour shift. Per unit means per 12 hours
900
434
390600
... More
Arranging unskilled workers with all tools for Non Interlocking working as per the instructions of engineer in charge.
100
231
23100
... More
Arranging skilled workers for non Interlocking working with all tools and plants required as per instructions of engineer in charge
100
308
30800
... More
Providing services of helping hand man power to carry out miscellaneous/sundry works in the 20 office/field between 08.00 hrs and 20.00 hrs of the day and accompanying Railway staff with all expenses of transportation, accommodation, food, consumables etc., with all ascents/descents, taxes, octroi, cess, fees,duties, with contractors tools.
720
630
453600
... More
Laying GI pipes of 50/80/100 mm.dia. with coupling wherever required as per the railway requirement over the cement bridges, girder bridges, drainage culverts etc.,. The cables are to be taken through 21 pipes without causing any damage. GI Pipe will be supplied by Railways and all other materials shall be arranged by the contractor. The pipes he GI pipes are to be provided on MS channels with suitable fitting on Girder bridges without drilling holes on the girders and GI pipes are to be drilled with holes 6 nos. of 1/4" dia. per Mtr. and around the pipe before laying for 6 m. pipe in zigzag manner).
600
91
54600
... More
Excavation of earth and providing earth pipe of size 50mm dia, 3.5mm thick 2.0 m. long G.I. pipe with masonry tub constructed around at earth locations as specified by site Engineer. Alternate layers of 30kgs- 22 char coal and 30kgs-common salt to be filled in the pit while closing. The pipe perforation etc., to be carried out as per drawing No. G/SG/09/2002. The earth pipe to be connected to the function with cable as supplied by Railways. Earth reading should be less than 03 Ohms The reading should be painted on the masonry tub. The masonry tub of 300X300X300mm should be covered with cement slab. ( All materials to be supplied by the contractor except cable.)
60
5100
306000
... More
Earth work in filling enmbankment
2000
164
329680
... More
Supply and filling sand as per the technical specifications.
75
615
46127.25
... More
Painting of particulars of Glued Joint on rails/track circuit No. on TLJ boxes as per particulars 25 issued by Engineer in charge. Before painting on surface of the Glued Joint Rails/TLJ boxes shall be cleaned thoroughly. Painting shall be done with approved quality of stranded paints like Asian/Johnson/Nicholas /Berger etc., All the men and materials shall be arranged by the contractor the colors scheme shall be as per the instructions of Engineer in charge.
500
95
47750
... More
Fabrication and Supply of perfarated GI FRAME for earthing of cable armour in FULL & Half location boxes. This includes sizing, bending, holes drilling and galvanizing of MS flat as per the drawing supplied by railways. All materials will be supplied by the contractor.
-
-
75630
... More
Releasing of relay racks complete with its wiring, relay base, supporting frames, cable ladder, indoor/outdoor cables etc. Axle counter wiring, Data logger and its wiring, panel and its wiring completely and any othe miscellaneous wiring in relay/equipment/panel room etc. complete.
1
24882
24882
... More
Supply and fixing of cross on the signals (signal not in use) made of hard wood of size 1000mm x 100mm x 20mm (painted white as per SEM & suitable clamp made of MS flat.
100
328
32800
... More
Wiring of point machine as per the wiring diagram duly disconnecting and rearanging the working 29 wiring as per instructions of engineer incharge and testing from new panel for all safety checks and restoring back the working wiring to the previous state and again testing the point for all safety check. The above work is to be carried out under traffic conditions duly observing train movements. All materials except wire coils and point TLJB is to be arranged by the contractor.
30
1577
47310
... More
Testing of plain track circuits and point zone track circuits from track circuit location to station/cabin under traffic Condition duly disconnecting old wiring, bonding and reconnection of new wiring, bonding, and restore to normal working after testing.
25
569
14225
... More
Lifting/Shifting of existing Location box with foundation duly removing existing equipments, digging outdoor cable and refixing the same in the location box, after placing the location box at new location away from infringement as per the instructions of Engineer incharge .(All the materials to be arranged by the contractor)
60
2152
129164.4
... More
Supply and installation of teak wood telephone stands with decolam sheet top capable of accomodation two telephones DRG. NO SK/S&T/89/276
2
1293
2586
... More
Survey of existing cable route both signalling and telecommunication cables with cable route tracer and marking the same with lime powder and marking tape to protect the working cables from being damaged
20
994
19880
... More
Flashing of Relay contacts of all types of plug in type relays with relay flashing equipment. This 34 work involves removing relays, flashing & reinserting, Recording of contact resistance. pick up values, replacing defective relays with good ones as supplied by the railways and carrying out random testing from panel etc., and submission of report along with serial number wise/Relay wise as per instructions of Engineer in charge Relay flashing equipment will be supplied by the Railways.
300
28
8400
... More
Replacement/Relocation of damaged/ dilapidated/warn out TLJ boxes, with new ones. This includes replacement of TLJ box, stump, pipes, termination of 2core cable and track lead wires, fixing of TLJ box 35 duly digging the size of pit is 50cm X 50cm X 50cm and keeping loose cable into the pit and closing the pit. TLJ boxes will be supplied by the railways as per the requirement Released dilapidated/ damaged TLJ boxes shall be transported and stacked at central location . This work has to be caried out under traffic conditions duly observing train movements.
100
588
58800
... More
Arranging one skilled and one semi skilled technician to present at the Engg digging activity to protect S&T cables
720
539
388080
... More
Arranging of skilled and un skilled workers with required tools during point blocks for removal of S&T assests to give way for T28 Machines and refixing the removed assets after insertion/removal of point.
15
3178
47670
... More
Clearing Bushes around the location boxes making necessary arrangements to approach the location boxes. Per unit means per Box
150
498
74700
... More
Filling of sand in the masonary cable duct made in relay rooms/Power Room/SM Room and plastering the same after taking all cables in side. Per unit means per location.
3
12530
37590
... More
Fabrication & supply and fixing of stay rods for wiring support at location boxes, CT rack etc., this includes providing of sleev to stay rod, fixing bolts, nuts & washers etc as required at site.
300
265
79650
... More
Excavation of pit of 400mm x 400mm x 1500mm at a given location and erecting rail posts of various lengths, plumbing and concreting it with cement concrete in the ratio of 1:3:6 with 40mm graded stone and river sand and curing the same. (Rails and cement will be supplied by the railways)
2
300
600
... More
Supply and fixing of protection arrangment to the pedestals and meeting posts of liftiing barriers by providing MS Chain, 25mm ring, 10mm thickness of 1 meter length and fixing to the rail posts aleready available, drilling 12mm holes, fixiing with 115mm x 12mm bolts and nuts and painting chain and rail posts.
2
2739
5478
... More
Cutting of rails
10
47
470
... More
Installation,testing and commissioning of Electricallly operated lifting barrriers with assembly, drive mechanism, motors etc. with control panel, boom locking arranmgements & crank handles complete with Hand 44 generator as per detailed technical specification and instructions of site in-charge ( The above work includeds excation of pits & concreting foundation for pedestal - 2 nos, ecavation of pits & concreting foundation for gate meeting post-2 nos, Erection of Electric lifting barriers-2 set, fixinig of ELB panel & it's wiring -1 no as per detailed technical specification and instructions of site in charge.
2
30000
60000
... More
Supply of teak wood board for fixing 2 Nos of EKTs, with 2 Nos of push button, 6 nos 10 mm LED resistance holders etc. (only EKTs will be supplied by Railways)
2
5725
11450
... More
Fixing of sliding type mechanical boom, make assembly movement drive mechanism, resting 46 stand, meeting posts and fixing of E type locking plate to meeting post and in gate lodge as per the site incharge instruction. NOTE: all required nut, bolts, chains, pad locks-2nos, and other misecllaneous items are to be supplied by the contractor. Per unit means per LC gate (both booms)
2
23650
47300
... More
Excavation of pit and concreting foundations for resting stand/meeting stand (approx 10 Nos/item- 2)
2
16800
33600
... More
Fabrication, supply, fixing of M.S. of size 10'X 18'X9' with locking arrangement for locking the boom in stand by mode.
2
3235
6470
... More
Supply and fixing of retro reflective (High Intensive Prismatic : HIP) stop board made out of luminium sheet 2 mm thick and lettering in three languages and fixing arrangements to boom pipe and as directed by engineer in charge at site
2
3235
6470
... More
Supply of paint approved quality and painting of sliding type boom, boom movement frame, resting 50 stand, meeting post etc. as per regular standard practice with 2 coats of enamel paint black & Yellow colour with 12mm width retro reflective RED Yellow sticker. Rates included for all required nut & bolts, chains, padlocks 2 Nos and other miscellaneous are to be supplied by contractor
2
5600
11200
... More
Installation, energization, testing & commissioning charges with dual detection the work consists of (i) i)Fixing of Axle counter track device consisting of Tx-Rx coil assembly for each detection point (2 in Up direction & 2 in Down direction. Total-4 in double line section) by drilling holes in the rails as per the marking given by the site in-charge. (Note: Tx-Rx coil assembly and rail mounting fixtures are covered under supply of single section 51 digital axle counter) ii) Fixing of Rail deflector plates on either side of each detection points as per the marking given by the site incharge. iii) Fixing of evluators inside pre-erected location boxes on the nominated planks along with VR assembly duly providing anti vibration arrangement as per the instructions of site incharge. iv) Routing cables from Tx/Rx coil assembly through pre laid GI pipe/HDPE pipe arrangement of track crossing and entering termination box and termination. Note: Rs. 10000/- will be released after installation & testing, Remaining amount will be released after completion of field training for minmum 10 persons.
8
56180
449440
... More
Supply and installation of wago connectors FTB set. Per unit means per Location
8
2000
16000
... More
Supply and installation of wago connectors UFTB set (Un-fused terminal block)Per unit means per Location
8
1800
14400
... More
Supply and installation of wago connector End Plate set (End Clamp). Per unit means per location
8
1300
10400
... More
Supply and installation of Din Rail. Per unit means per location
10
350
3500
... More
Fabrication , Supply & fixing of reset box stand made 1'X1' L angle to fix reset box with powder coating & hylam sheet.
10
2832
28320
... More
Supply, Installation, Testing and Commissioning of Addressable Multi detector combination of heat 57 cum smoke, with isolator base binary coded address setting. Dual LED'S Tor 360 degrees visibility, Sleek low- profile housing design, Regular 100mm base. IP Rating: IP-42. Approval:UL listed, (As per RDSO Specification No. RDSO/SPN/217/2018 ver 2.0 or latest.(Inspection by RDSO)
20
6750
135000
... More
"Supply, Installation, Testing and Commissioning of Sounder cum strobe 24V operated 85db sounder output, 75Cd flasher controlled through addressable control module (As per RDSO Specification No. RDSO/SPN/217/2012 ver 2.0 or latest)(Inspection by RDSO) "
2
7500
15000
... More
Supply of Designing and Uv printing of station working order/Track bonding diagrams of size 6ft x 3ft in molded aluminum channel with elegant and stainless steel star brackets for hanging arrangement. Printing in UV print and designing in corel draw package.
500
855
427500
... More
Breaking of RCC Concrete in Relay Room/ Panel Room or drawing cables to ground floor and 1 st floor
10
3700
37000
... More
Supply and installation wiring and commissioning of NI panel made out of MS sheet 16 gauge of 61 size 1200mm height x length 1200mm x depth 600mm with powder coated and also two relay frames fixed inside the panel for fixing of relays and wiring and all the internal wiring between signals, track circuits up to termination point with 200 wagos duly wired
1
51200
51200
... More
Non Interlocking Circuit wiring of NI Rack/ CT Rack in Relay Room for one station. This includes 62 wiring of relay base plate to other base plate, to IDF, to tag block, wiring of circuits as per approved NI wiring diagram, jumpering and soldering after testing, power equipment, NI operating panel, key lock, test boards,etc., fuse boards etc, Per unit means per Station.
1
57676
57676.36
... More
Provision of ring earth by connecting conventional earths with copper catenary wire as required at site as per instructions site incharge. Excavation of earth and providing earth pipe of heating gravity of size 50mm dia, 3.5mm thickness, 2.0m long GI pipe of heavy quality along with masonry tub constructed arround at earth locations as specified by site Engineer. Alternate layears of charcoal and common salt to be filled in the pit while closing. The pipe perforation etc., to be carried out as per drawing No.G/SG/09/2002. The masonry tub of 400X400X450mm. 50mm thickness should be coverwith cement slab to be provided each conventional earth. 63 Masonry tube shall be filled with river sand after complection of earthing. Conventional earths to be wrapped with catenary wires before excavated in earth along with use of proper clamps and nuts. All earths to be connected with each other by use of copper catenary wire or suitable cable provided by railways. Minimum two number earth pipe to be connected insode the location/function with suitable cable(cable will supplied by railways). Excavation of trench of 0.5m minimum depth for inter connection of 4 conventional earths by catenary wire. Catenary wire should be welded through are welding to the GI pipe with copper clamps. The earth reading. D.O.I & D.O.M. should be painted on the masonry tub.(All the men and the matrerials to be supplied by the contractor except catenary wire.)
4
18445
73780
... More
"Fencing for Location Box duly providing foundation ( A pit of size 400mmX 400mm X 1000mm is to be dig and cement concrete foundation in the pit in the ratio 1:3:6 to be casted) and fixing the frames/doors and 64 universal type lock to the fencing with supplied material. The rail post / angular is to erected up right in the foundation. All the materials are to be arranged and used by the contractor ( Rail post/ angular / frames / universal type locks will be supplied by the Railways). Cutting of rail post / angular to the required length, transportation to the site by the contractor.(Set = 04 Nos) "
40
3856
154240
... More
Supply, Erection and Fixing of retro reflective type BPAC Warning boards of size 65 600mmx40mmx6mm thickness of 2.2 mtrs long. [retro reflective type BPAC Warning boards, Angle, stone jelly of size 20/25mm dia, river sand, cement , fixing bolts and nuts, paint and all other miscellaneous materials required for the work shall be supplied by the contractor].
8
7118
56951.68
... More
Laying of 50x6mm G.I. tape for interconnecting of earth electrodes.( This includes excavating of trench to a suitable depth as per site requirement and refilling of the same after laying of GI tape as per requirement
100
148
14800
... More
Fixing of offset bracket using 'U' bolts and nuts erection of posts type shunt signal termination of tail 67 cables, provision of EWS lock and painting of one coat of redoxide and two coats of aluminium / enameled paint. The work also includes drilling suitable holes on the CLS post and provision of a through bolt with nut to prevent the offset bracket from slipping down.
5
1613
8066.25
... More
Painting of Lifting barriers booms with alternate band of yellow and black and painting all accessories. Per unit means per LC.
2
2250
4500
... More
Supply and installation of UPS 1000va , 30 min backup, nemuric , as per instructions of engineer in charge . (Inspection by consignee)
3
9534
28602
... More
Supply of wire mesh (Gl) with welded MS flat /Aluminium frame and fixing on windows/ventilators of different sizes as to be given by engineer
800
669
535248
... More
Laying of RCC / DWC pipes carrying from the stock of central place at station to the work spot 71 without causing any damage and placing them in the trench duly clearning the ballast per track crossing / down the culvert in the trench, gap between DWC / RCC pipe and collar has to be closed using cement mortar. (DWC / RCC pipes will be supplied by Railways) and all other materials viz., collars for the joints, cement mortar for closing gaps between collar and pipes are to be supplied by the contractor.
500
50
25000
... More
Installation, wiring, testing and commissioning of high thrust point machine. This includes fixing of point machines on MS plate fixed on sleepers complete with fixing of anti theft covers, MS termination boxes, 72 ground gear connection, crank handle ward etc. where ever required. Fixing of required insulations and adjusting SSD. Termination of cable and wiring of machine as per wiring diagram, adjustment & testing with crank handle operation. This will also includes necessary adjustment and smithy work, drilling of holes to tongue rails, supply of flat, angle, bolts, nuts, pins as required. Removal & re-fixing of fittings if required, Testing the point machines from point of operation including testing with 5 mm test piece. Per unit means per Point machines
15
12067
181005
... More
"Excavation of jointing pit and provision of FRP joint / Loop chambers of 90 Cms. Inner dia 60 Cms depth and 3mm thickness with two pieces of top cover with hooks each and bottom cover with hole for drainage 73 and cable entry as per Drg. No. RAILTEL/SR/OFC/ 2009/12 and as directed by Engineer to be provided at every joint location and a t every Kilometer loop etc., The chamber shall b e filled with sand mixed with anti-stermic powder, back filling and ramming of trench after HDPE duct laying, splicing and consolidation of soil. Inspection: Consignee. "
10
4500
45000
... More
Installation o f MAPLE 4CS or Similar reputed make Equipment a t Station/IBH fo r BPAC /Other circuits working on OFC.
5
8427
42135
... More
Design of SIP & TOC for RYP station.(Payment will be made once a station document is approved by HQ based on number of routes)
300
1180
354000
... More
Independent checking and verification of interface circuits for stations having up to 25 Routes by IRSE/IRSTELO License Holders. Per unit means per station
1
50000
50000
... More
Independent checking and verification of application Logic circuits for stations having up to 25 Routes by by IRSE/IRSTELO License Holders. Per unit means per station
1
125000
125000
... More
a) design and development of outdoor drawings for outdoor signaling work for near PI/EI/RRI station. Per unit means per station.
1
98563
98563
... More
b) Preparation of station working Rules, CRS papers etc as practice in railway for yards/LC Gate/ INH including XEROX. Per unit means per Application.
1
11483
11483.55
... More
c) Supply and binding of Album type booklet with C- size plastic transparent covers of approved quality
10
590
5900
... More
d) preparing and supply of cable path and cable Distibution diagram 'U' size Drawing in Auto CAD
3
4500
13500
... More
Scanning of As made approved documents after signature and handing is over to SSE in charge in a CD. List of documents to be scanned a) SIP b) ESP c) TOC d) VDU layout e) interface ckt and detailling book f) logic circuits g) Track bonding diagram etc.,
5000
8
40000
... More
Excavation of pit and casting concrete foundation as per Drg. No.RDSO/M/00011/R4 Using metallic templates, for erection of Colour light signal up to 4 aspects (Foundation bolts, cement, river sand, stone jelly of size 20/25mm and all other miscellaneous materials required for the work shall besupplied by the contractor
6
14042
84252
150
423
63525
... More
Shifting of S&T Location/Battery boxes (Horizontal re-location)by excavating the earth around the location boxes without damaging the cables to the required depth and slewing the boxes along with foundation 86 block by JCB/Hydra t o get required clearance without interfering t h e movements o f trains a n d also without disturbing the train operation system and closing the pit after getting required clearance from Central line o f the track with all contractor's material, labour, tools, plant with all lead and lift etc., and as directed by the Engineer in charge at site. (Per Unit=Each Full/Half/Quarter Box)
40
5309
212382
... More
Fabrication and supply of wall mounted maintainer's Tool Kit frame made out of MS sheet 10 87 gauge with powder coated as desired colour at site of size 1.5 Mtrs. Length X 0.8 Mtr. Width X 0.15 Mtr. Depth with all fixtures for mounting individuals, tools inside the board and in front with Acrylic sheet 4mm thickness with locking arrangements and all necessary fixtures to fix on wall.
1
13125
13125
... More
Fabrication and supply of box suitable for 8 nos KLCRS
3
17700
53100
... More
Supply and installation and wiring of KLCR Relay 24V DC, AC immunized 4F/4B contacts
15
10740
161100
... More
Track crossing by Horzontal boaring method based on RDSO Report No.BS-105. This also includes includes insertion of HDPE Pipe of 110mm Outer dia in the Bore drilled.
1000
2264
2264000
... More
Supply placing and covering of RCC duct from Home to Home as per para 7.3 and annexure 8 & 10 of RDSO guidelines for cable laying detailed in technical specification. (Inspection of Supply RITES)
2000
1928
3857140
... More
Supply and placing of Smart RFID Marker (SM 1500 Telephone HSN Code 90314900 part No. SML 1014 or similar) in Cable Trench.
100
2265
226500
... More
Supply and installation of PD MUX- supply of make 2 Mb programmable primary digital drop insert 94 Multiplexer as per RDSO Spec No.IRS-TC-68/2012 with Amd.1 or latest, with conference facility as per technical specifications. This includes PSU cards-2Nos., TME cards-01No. and DAC card-01No. for power supply monitoring. The MUX shall be equipped with following interface cards: (1) 2w/4w E&M/VF interface card (Min. 4 cirecuits per card) x 4 Nos (Total - 16 circuits), (2) Exchange loop interface card (Min. 4 circuits per card), x 1 No (total 4 circuits), (3) Subscriber hotline interface card (Min. 4 circuits per card) x 1 No (Total 4 circuits), (4) 64 Kbps G 703 data interface card (Min. 4 cuircuts per card) x 1 No (Total 4 circuits)
2
207793
415586
... More
Maintenance charges of OFC cable network as per technical specification in VNEC-RYP Section till handing over or at least for six months . This item will commence only after joint testing of OFC with required parameters in a block section. Per unit means Per KM/Per Month
30
1480
44400
... More
Maintenance of 6 quad cable till handing over or at least for six months . This item will commence only after joint testing of 6 quad cable with required parameters in a block section
-
-
76950
... More
Supply of IOCOM CPU CARD. Inspection: RDSO
4
137848
551392.2
... More
Supply of IOCOM VOLTAGE AND HEALTH MONITORING CARD. Inspection: RDSO
4
68717
274870.2
... More
Supply of INPUT WFM CPU CARD .Inspection : RDSO
9
87953
791584.38
... More
Supply of OUTPUT WFM CPU CARD. Inspection : RDSO
6
92840
557044.32
... More
Supply of WFM RELAY DRIVER CARD. Inspection : RDSO
6
60168
361008.54
... More
Supply of OCM VITAL CUT-OFF CARD. Inspection : RDSO
2
92277
184555.38
... More
Supply of POWER SUPPLY CARD TYPE B. Inspection : RDSO
4
51187
204748.84
... More
Supply of POWER SUPPLY CARD TYPE C. Inspection : RDSO
4
85758
343033.6
... More
Supply of SINGLE MODE RS485-OFC BI-DIR. CONVERTER. Inspection : RDSO
6
131936
791616
... More
Supply of 24 V EMI FILTER. Inspection : RDSO (Only Card Files)
10
29025
290259.2
... More
Supply of OC Cardfiles, Consisting of OC TOP BIN & BOTTOM BIN for RYP Inspection; Consignee
2
617393
1234786.38
... More
Supply of EI Relay Racks for RYP. Inspection; Consignee
2
550000
1100000
... More
Supply of insulated wire coils for Relay Rack Wiring, Laddert material along with accessories for installation for RYP. Inspection; Consignee
2
850000
1700000
... More
Modification to the existing relay racks as per the approved interface circuit for RYP. Inspection; Consignee. Per unit means Per Location
2
380000
760000
... More
Modification to the existing interface circuits, according to the modified SIP for RYP . Inspection; Consignee
1
1475000
1475000
... More
FAT, SAT as per the modified application logic for RYP. Inspection; Consignee
1
2975000
2975000
... More
Installation and commissioning for RYP. Inspection; Consignee
1
2660601
2660601
... More
Supply of ASMADES (1set of Tracing) for RYP. Inspection; Consignee
1
350000
350000
... More
Supply of commercial grade Operator VDU of size 55" Full HD, HDMI/DVI Connectivity, Inbuilt Speaker etc (For this item Prior approval of Engineer In charge required in written) for RYP. Inspection; Consignee
3
226320
678960
... More
Supply of fan less embedded industrial grade computers ( Similar to Moxa V2406A or better ) with all accessories such as key board, mouse,antivirus etc. of industrial grade as per approved Specification as recommended by RDSO (TAN No. STS/TAN/3007 Version 1.0 or latest) for RYP. (Inspection: Consignee)
3
257250
771750
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements