South Central Railway Tender

Supply and Erection of GI Channels of Size 150 X 75mm along with all Neccasary Accessories.

Supply and Erection of GI Flat of Size 25 X 3 mm along with all Neccasary Accessories.

Provision of concrete for foundation and plinth with ratio 1:3:6 with all connected material and labour as per explanatory note.

Design, Supply and erection of 2 KVA power supply unit as per explanatory note

Supply and fixing of junction box suitable for street light poles model no.GSJB306-T of size 9 275mm X135mm X 110mm with 4 nos of connectors and suitable clamps for fixing , Fire retardant -Class FV-0 as per IS:11731 Part-II or V-0 as per UL-94 Makes :Sintex/Hensel/L&T.(fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clapms 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels-poles as per the directions of Site engineer.

Supply and fixing of B curve SP MCBs of 6A with all Connected accessories as per IEC 60898-

Supply and Erection SMC Junction Box of Size 295 x 195 x 100mm of Model No. Sintex GSJB- 11 3020 Complete with 4-Way connector complete with SS bolts and nuts Makes :Sintex, Hensel etc...(fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clapms 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer.

Supply, Fixing and Connecting of Welding Sockets of approved make housed in MS Sheet iron box of suitable size with suitable MS Clamps and duly painted with 2 coats of Red-Oxide and 1 coat of Anti- Corrosive paint complete with all connected material and works.

Supply and fixing of 63 A 4P MCB C Curve , 10 KA capacity with necessary connections and all accessores complete.

Supply and Laying of 4 core 150 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 or latest amendment.

Supply and Laying of 4 core 95 sqmm XLPE insulated underground armoured aluminium cable 15 with heat resistant insulation as per IS 7098(Part 1)1988 or latest amendmen. Make Torrentt,Polycab,Havells,KEI,Gloster. Connecting of cables is to be done with proper Al/Cu lugs of approprate size.

Supply and Laying of LTUG 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 or latest amendment. Connecting of cables is to be done with proper Al/Cu lugs of approprate size.

Supply and Laying of LTUG 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 or latest amendment. Make Torrentt, Polycab, Havells, KEI, Gloster. Connecting of cables is to be done with proper Al/Cu lugs of approprate size.

Supply and Laying of 2 core 70 sqmm XLPE insulated underground armoured aluminium cable 18 with heat resistant insulation as per IS 7098(Part 1)1988 or latest amendment. of make.Havells/Finolex/ Polycab/ Toronto/Gloster.(Cable bobin shouls be good quality).Connecting of cables is to be done with proper Al/Cu lugs of approprate size.

Supply and running of 8 SWG GI earth continuity wire complete with connections.

Supply fixing, of HDPE pipe of 75 mm outer dia of PE-100,PN6 class with minimum wall thickness of 3.5 mm with suitable couplings and clamps for cable laying with all necessary accessories complete.

"Supply and laying of HDPE pipe of PE-80 grade in PN-4 size 2"" inner dia and outer dia 63 mm and wall thickness minimum 2.5mm, maximum 2.8 mm with 'T' joints, bolts, elbows etc. including all other connected accessories.

Supply and Erection, of HDPE pipe of 50 mm outer dia of PE-100,PN6 class with minimum wall thickness of 2.3 mm with suitable couplings and clamps for cable laying with all necessary accessories complete.

Supply and laying of PE 63 grade HDPE pipe of size 40mm outer dia PN8 with necessary Couplings, clamps, brackets nuts bolts and all necessary accessories for fixing to wall/structure complete.

Excavation of cable trench in all types soil of size of size 400mm wide x 1 mtr. deep, and making 24 good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge.

Excavation of cable trench duly breaking the existing cement concrete flooring and filling with layer 25 of sand bricks etc.,as per the standards of cable laying (A minimum of 1mtr depth and 400 mm width) and filling the trench with soil duly ramming etc.The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge.

Excavation of cable trench in hard soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works.

Excavation of cable trench under the Track below 2mtrs. horizontal drilling bore with Hydrallic Jack suitable size for provision of 110/50mm dia GI/HDPE pipe

Supply and provision of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23.

Earthing arrangements as per standard specifications and drawing enclosed including digging 29 earth pit, electrode EARTH BOX with reinforced concrete complete with all other connected materials and works including connecting the earth electrode and aerial earthing according to IS 3043 and RDSO drawing ETI/OHE/P/7021 in other than substations.

Supply erection, testing and comissioning of Maintenance free earthing similar to JEF ECOSAFE 30 ,Pragati electrocom ltd,vijetha earthing etc., with earth electrode of low carbon steel rod of 3 mtrs long and 17.2mm dia with 250 Microns thick copper coating with 2 bags(each 10Kg) of LORESCO back fill compund with all necessary accessories complete according to IS 3093

Supply and fixing and connecting P-17 Tempra plug and socket IK 08,of 63A, 3P+N+E -FP of model no.507864 of legrand make or equivalent in Hensel/L&T/Havells/ABB/SEIMENS as per IS/IEC 60309-1 (2002)

Supply and fixing of C curve FP MCBs of 40/50/63 A with all connected accessories as per IEC 60898-1

Provision of Concreate for Foundation and Plinth in Hard Soil

Supply and Erection of 95 Sq.mm Stud Type Power terminal blocks Din rail mounted of Model No. CBB95 of Connect well Make.

Supply and Erection of Partition Plate Suitable for 95 sq.mm to 150 sq.mm terminal blocks of Model No.PPCBB1 of Connect well Make.

Supply and Erection of SMC Junction Box of Size 700 x 480x 210 mm of Model No: Sintex GSJB 36 7450 to fixing of 4-Pole MCCB-63A and termination of 95 Sq.mm cable to extend supply to welding plants.Make: Sintex, Hensel etc...(fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clapms 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer.

Design, Supply, Testing, Erection and Commissioning of ON/OFF delay timer circuit arrangements for lightings ON/OFF operation in 1.6mm thick CRCA sheet enclosure of 16"X12"X8"size with door and lock & key arrangement BCH make comprises follwing switchgears including stickering and all other connected accessories complete. a). 2 nos of Micon 225 Timer b). 2 sets of 3 pole contactor 45A AC1 (25A AC3) c). 2 sets of On push Button with Elements d). 2 sets of LED Indication Lamps e). 8 way/ 2 sets of 4 Way Terminal Conector & internal wiring arrangements

Fabrication and erection of 14 SWG CRCA sheet steel enclosure of suitable size for outdoor LT distribution panel with Double Door, including cutting, bending drilling, welding and reveting etc, complete with cleaning with 7 tank process and painting with EPOXY powder coating including cost and conveyance of all materials and labour charges. The MDBs shall be mounted on suitable required size of CC plinth (CC plinth cost will be paid separately) and secured with bolts, nuts and washers as advised by Engineer at site. The panel comprising of 500A tinned Copper Bus Bar(RYB & N of same size) required shape supported with appropriate DMC / SMC barriers and colour coded with heat shrinkable sleeves,LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters( Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh) , Current T/Fs, indication lamps for incoming & outgoing feeders. suppot insulatorS, neutral links,Incoming & outgoing terminals,suitable cable termination glands , grommets, lugs, connecting wires 38 and all other accessories suit with the following switchgear and accessories. The cables should be properly terminated in the switchgears with necessary lugs and all necessary accessories complete.The panel should comprise of the following Switchgear. (Drawing approval to be taken prior to supply) 250 A 4P MCCB, 36 KA, Micro processor based adjustable with LSIG protection communcation capable conform to IEC 60947-2 model no. 4205 39 of Legrand make or it's equivalent with extended ROM , spreader links (2 sets), Make: Legrand,ABB,Siemens,Schneider,L&T(D-Shine).- 2 no's 100 A 4P MCCB, 35 KA, Micro processor based adjustable with LSIG protection communcation capable conform to IEC 60947-2 or it's equivalent with extended ROM , spreader links (2 sets),- 4 no's B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1. 2 no's Supply and erection of LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters( Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh) on existing box panel board including connections complete.- 2 no's Supply and erection of LED indicator lamps on the existing box panel board- 6 no's Supply and erection of LT current transformer with primary 100/5A to 1000/5A ratio in the existing panel including connections complete- 8 no's

Supply and laying of 32 mm dia 2 mm thick PVC pipe (ISI mark) concealed in roof slab and wall with all required accessories including masonry work and labour charges etc (for main to sub mains).

Supply and concealed laying of 25 mm dia 2mm thick PVC pipe (ISI MARK) heavy mechanical stress FRLS with all required accessories including masonary work and labour charges etc.

Supply and laying of 25mm casing and capping of ISI standard with necessary screws (the distance between the screws shall not exceed 0.5 m) including joints bends and all necessary accessories complete.

Supply and erection of 12 mm dia GI flelible conduit pipe as per IS 3480 wall/roof with all required accessories including masonry work and labour charges etc .

Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 1554-part 1.

Supply and run of 2 nos, 4.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 1554-part 1.

Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit/Casing and capping pipe.

Supply and Laying of 4 core 185 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 or latest amendment.

Supply fixing, of HDPE pipe of 90 mm outer dia of PE-100,PN6 class with minimum wall thickness of 3.5 mm with suitable couplings and clamps for cable laying with all necessary accessories complete.

Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. Make: Schneider,Legnard,Thomas & Betts,Atkore International.

Supply, Installation, Testing and commissioning of 11KV/415V Delta/Star connected 750 KVA 12 copper wound Power Distribution Transformer Outdoor type with OFF load tap change complete with accessories , Oil temp indication, winding temp indication & buchoilz relay as per IS 1180, Energy Efficiency Level 2, four star or above as per latest CEE latest.

Removing the existing 500 KVA transformer from the plinth / Pole including connections etc.,

Loading, transportation and Unloading of transformer of 500 KVA capacity from site/substation to Depot or as per the supervisor instructions

Supply, Laying and connecting of 4 core 630 sqmm XLPE insulated underground armoured 15 aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 or latest amendment. Make Torrentt,Polycab,Havells,KEI,Gloster. Connecting of cables is to be done with proper Al/Cu lugs of approprate size.

Supply and laying of 6 " HDPE pie of PE 80 with outer dia of 160 mm with PN6 with a min wall thickeness of 9.1mm of M/s.Sudhakar make with all necessary bends/couplers whereever necessary complete for cable ducting under the track for the powerline crossing.

Fabrication and erection of 14 SWG CRCA sheet steel enclosure of suitable size for outdoor LT distribution panel with Double Door, including cutting, bending drilling, welding and reveting etc, complete with cleaning with 7 tank process and painting with EPOXY powder coating including cost and conveyance of all materials and labour charges. The MDBs shall be mounted on suitable required size of CC plinth (CC plinth cost will be paid separately) and secured with bolts, nuts and washers as advised by Engineer at site. The panel comprising of 1600A tinned Copper Bus Bar(RYB & N of same size) required shape supported with appropriate DMC / SMC barriers and colour coded with heat shrinkable sleeves,LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters( Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh) , Current T/Fs, indication lamps for incoming & outgoing feeders. suppot insulatorS, neutral links,Incoming & outgoing terminals,suitable cable termination glands , grommets, lugs, connecting wires and all other accessories suit with the following switchgear and accessories. The cables should be properly terminated in the switchgears with necessary lugs and all necessary accessories complete.The panel should comprise of the following Switchgear.(Drawing approval to be taken prior to supply) Supply and installation of 415V 1250A 4 Pole ACB with Microprocessor Release 50KA Drawout type including all accessories complete 17 Makes : ABB/Siemens/L&T/Scheinder/Havells - 2 NO'S Supply and installation of 415V 800A 4 Pole ACB with Microprocessor Release 50KA Drawout type including all accessories complete Makes : ABB/Siemens/L&T/Scheinder/Havells - 1 NO'S Supply and installation of change over switch of 1250A of model no: IHCNFO1250 of havells make or similar Makes : ABB/Siemens/L&T/Scheinder/Havells - 1 NO'S Supply and installation of 630 A 4P MCCB, 50 KA, Micro processor based adjustable with LSIG protection communcation capable conform to IEC 60947-2 model no. 4205 39 of Legrand make or it's equivalent with extended ROM , spreader links (2 sets), Make: Legrand,ABB,Siemens,Schneider,L&T(D-Shine).-1 NO'S Supply and installation of DPX3 630 electronic based with LSIG protection, 400A 4 Pole MCCB , 36KA Breaking capacity conform to IEC 60947-2 of communcation capable model no. 4221 53 of Legrand make or its equivalent with extended ROM , spreader links (2 sets), Makes: legrand/ABB/Siemens/Schneider-2 NO'S Supply and erection of LT 3 Phase Digital Multifunction energy meter with 3 lines LCD display for measuring all the parameters( Voltage/ Current/ Power/Frequency/power factor /kw/kwh/ kvar/kvarh) on existing box panel board including connections complete.2 NO'S Supply and erection of LED indicator lamps on the existing box panel board-7 NO'S Supply and erection of LT current transformer with primary 100/5A to 1000/5A ratio in the existing panel including connections complete-4NO'S

Supply and Erection of 16 Sq.mm Standard feed through terminal blocks of Model No. CTS16U of Connect well Make.

Supply and fixing of C curve DP MCBs of 32/25/20 A with all connected accessories as per IEC 60898-1

Supply and fixing and connecting P-17 Tempra plug and socket IK 08,of 32A 2P+E -DP of model no.507863 of legrand make or equivalent in Hensel/L&T/Havells/ABB/SEIMENS as per IS/IEC 60309-1 (2002)

Supply and Erection of LED Highbay 150 Watt Lux>=120 Lm/Watt IP 65 Protection Makeof LED acceptable as per CEE specification.

Supply and Erection of Heavy duty BLDC Air Circulator Wall Mouting Fan 600MM Sweep, 1440 22 RPM, 230V,AC 50Hz with spped regulator, power consumtopn at speed 1: 100 watts, speed 3: 170Watts, rated speed: 1400 rpm, air delivery : 717 CMM with reverse polarity protection, over voltage protection, short circuit protection, blocked blade protection comfirming to IS-2997/1997 with two years warranty, Make-Bajaj, Usha, Almonard or Crompton Greaves, Airzon, Orient, RR electric.

Supply and Erection of LED street light fittings of 70W with suitable driver with all connected materials as per CEE specificationno: SCR/LED (OD) LIGHT FITTINGS/003/2016

Supply fixing connecting and comissioning of 18 way SPN Distribution board of model no.5076 14 with IP 43 - IK09 of legrand make comprising of the following switchgear of make with all connecting accessories complete

Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to TEC 60755 as advised by the site supervisor with all necessary accessories complete or equivalent in

Supply, fixing and connecting of 2pole 2 module 16A Lexic RCBOs conforming to TEC 60755 as advised by the site supervisor with all necessary accessories complete or equivalent in

Supply, fixing and connecting of 2pole 2 module 6 A 30mA RCBOs conforming to IS 12640-2 of M/s.Havells Make of model no.DHBMACDP4030016 as advised by the site supervisor with all necessary accessories complete or equivalent in

Supply and fixing of B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1.

Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 Cat.Nos: 811010 with all connected accessories.

Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 Cat.Nos: 811050 with all connected accessories.

Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity of only with all necessary accessories complete.

Supply and Erection of SMC junction Box of Size 530 x 450 x 175mm of Model No: Sintex GSJB 5345 to fixing of 4-Pole MCCB and termination of cable to extend supply etc.

Supply and Erection of SMC Distribution Box of size 400 x 300 x 190mm of Model No: Sintex GSJB 4030 with clip on type terminal blocks suitable for 70 Sq.mm size cable.etc.

Supply and Erection of 70 Sq.mm Stud Type Power terminal blocks Din rail mounted of Model No. CBB70 of Connect well.

Supply and Erection of Partition Plate Suitable for 50 sq.mm to 70 sq.mm terminal blocks of Model No.PPCBB of Connect well Make.

Supply and Erection of POLYAMIDE SCREW END CLAMP FOR DIN35/32 of Model No.CA102 of Connect well Make.

Provision for wiring with two runs of 1.5 sqmm 1100 V and one run of flexiblel copper conductor 1.5 sqmm 1100 V PVC insulated wires (phase, neutral and earth) in the existing concealed PVC conduit 1 pipe/Casing and capping with 6A flush modular type switch (similar to Havells model No.AHLSXXW101/061) control including 2 way switches where ever required, 3 pin ceiling rose and modular type plate cover to MS switch control box including all labour charges complete for fan points, light points, bell points , exhaust fans points etc.

Supply, fixing, connecting and commissioning of 6A 5pin modular plug socket, with 6A modular control switch on existing control board with wiring.

Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories.

Supply and fixing of 6A Bell push switch with indicator conforming to IS:3854 model 4 no.AHLSBIW100/060, one module cover plate model no.AHLPLCWV01, 1/2 module flush metal box model no.AHZXMIZX01 of Havells make or similar to Legrand/Indo asian-Hussman make including all other connected accessories complete.

Supply and fixing of Electronic Parrot Bell of 2M of model no. AA2 082 of GM make or equivalent with necessary connections.

Supply and Erection of Super efficient BLDC star electric ceiling fan of 1200mm sweep as per latest CEE specification

Supply and Erection of 20W 4 feet LED tube light as per CEE specification with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties extenstion wires etc for fixing) Bajaj

Supply and Erection of LED Street light fittings of 30 W with suitable driver with all connected materials as per CEE specification. conforming to IEC 60598-1 (The supply includes accessories such as clamps, ties extenstion wires etc for fixing)

Supply and Erection of Metal flush box-6 module of model no:JIM 06 004 of GM FOURFIVE make with 6 module cover plate(With support frame) of model no:PK SB 06 005 - CASABLANCA of GM make or equivalant modular Legrand/Havells make comply with IEC 60669-1 including all accessories complete.

Supply and Erection of Metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make with 8 module cover plate With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equivalant modular comply with IEC 60669-1 including all accessories complete.

Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 with necessary screws and all accessores complete.

Supply and fixing of SPN DB's,8 way 8 module confirming to IEC:61439 IP 43 with metal door model no.507611

Supply, fixing and connecting of 4 pole 4 module 32A 300mA Lexic RCBOs conforming to TEC 60755 as advised by the site supervisor with all necessary accessories complete or equivalent in Havells/L&T/C8.S/Schneider/Indoasian/ABB.